DisplayPort to HDMI Converter - Converts a DisplayPort signal into HDMI - Supports resolutions up to 4K 3840x2160@30Hz - Audio pass-through if supported by the video source - Quick and simple plug & play installation The Lindy DisplayPort to HDMI Converter is ideal for connecting a DisplayPort equipped source such as a PC or laptop to an HDMI monitor or TV. It supports resolutions up to 4K 3840x2160@30Hz and allows audio pass-through if supported by the video source. This converter can also be used to add a secondary monitor for extended or mirrored desktop modes to increase productivity and screen real estate. With its lightweight, low profile design and plug & play installation this converter is perfect for travelling and simply expands available connectivity options - ideal for BYOD applications. This Converter requires the source or graphics card to support DP++ to provide dual-mode signals.
Product kirjeldus: Club 3D - network adapter seadme tüüp: Network adapter Form Factor: External liides (Bus) Type: USB 3.2 Gen 1 Ports: 2.5GBase-T mõõtmed (WxDxH): 3.5 cm 1.5 cm pikkus: 24 cm kaal: 39 g Cabling Type: Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T, Ethernet 2.5GBase-T Data Link Protocol: 10Mb LAN, 100Mb LAN, GigE, 2.5 GigE Data Transfer Rate: 2.5 Gbps
Product kirjeldus: Kensington SmartFit One-Touch Single Monitor Arm - mount (adjustable arm) Product Type: Mount (adjustable arm) - desktop, C-clamp, grommet, desk-mountable Tilt: -90° to 90° Lift: 17 - 50.5 cm Rotation: 180° pöördepea: 180° Adjustments: Height Localisation: Europe Recommended Use: Monitor Recommended Display Size: 13"-32" VESA kinnitusing liides: 100 x 100 mm, 75 x 75 mm Max Load kaal: 9 kg Package Content: Installation tool
Protect private dataAre you looking for the perfect solution to protect confidential information? The Qoltec privacy filter will meet your expectations. It is a perfect solution for both large and small companies and individuals. It will work in the fieldwork, in offices, financial institutions and many other places where confidential information is processed. Micro-blinds technologyThe Qoltec privacy filter thanks to microblinds technology provides perfect visibility and the security of personal data and other important information so they are visible only to the person who is sitting in front of the screen. Additionally, it offers:- the highest quality - thanks to the use of LG material,- safety - thanks to the limitation of the viewing angle to 60 °,- anti-reflective coating - reducing the emission of blue light harmful to the eyes,- additional protection - against scratches, dust and dirt,- a wide range of products - allowing you to choose a filter with the appropriate diagonal,- full convenience - possibility of permanent or temporary installation.How to installOur product enables two types of attachments:1. Permanent installation is possible thanks to transparent self-adhesive strips that are mounted directly to the screen.2. The temporary installation is possible thanks to transparent mounting tabs which are mounted on the monitor frame. This option is the easiest form of attachment which also allows easy removal of the filter.
võrguseadeing Type: võrguseade Adapter Local Area võrguseade arhitektuur10Base-T liides: USB 3.0 võrguseadeing Form Factor1Data Link Protocol Supports: Gigabit Ethernet LAN kiibistik153 Data Bit Rate: 1000 Mbps võrguseadeing Compliant Standards: IEEE 802.1Q(VLAN), IEEE 802.3, IEEE 802.3ab, IEEE 802.3u USB 3.0: 1(USB 3.0 (type A)) LAN: 1(RJ-45) Requires operatsioonisüsteem: Apple Mac OS, Microsoft Windows Server 2008, Linux, Microsoft Windows Server 2003, Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows 7, Microsoft Windows XP 64-bit, Microsoft Windows 8, Microsoft Windows Server 2010 External värv: must Package Type1mm kõrgus (mm): 17 mm laius (mm): 25 mm Nominal kaal1Box kaal Brutto (kg): 6.55 kg Retail Packaging Netokaal Carton1
RaidSonic ICY BOX IB-HUB1701-C3 - hub - 7 ports seadme tüüp: Hub - 7 ports Subtype: USB Ports: 7 x SuperSpeed USB 3.0 Features: On/off switches Power: AC 120/230 V mõõtmed (WxDxH): 5.8 cm x 19.3 cm x 2.8 cm kaal: 213 g värv: Anthracite System Requirements: Apple MacOS, Microsoft Windows
Drive Cabinet Type: Internal Provides External Drive Bay Dimension102 mm kõrgus (mm): 24 mm sügavus (mm)15 mm Nominal kaal: 0.058 kg garantii Term (month)1kg Pack kaal Netto (kg): 0.1kg Pieces in pack: 1Box kaal Brutto (kg): 1kg Retail Packaging Netokaal Carton: 0.1kg Retail Packaging Netokaal Plastic: 0.1kg Packs in Box: 1Package Type: Retail1
Kuvab HDMI-signaalid 4 ekraanil üheaegselt ühest allikaseadmest Toetab kuni 4K 60Hz 4:4:4 resolutsiooni, lisaks toetab HDR-i. Väljavõte digitaalsest ja analoogheli HDMI-st mitte-HDMI võimendite jaoks Omab korralikku lülitit 4K-st 1080p-ni alandamiseks 2-aastane garantii Lindy 4 Port HDMI 2.0 18G Splitter koos heliga on multifunktsionaalne lahendus kvaliteetsete HDMI-signaalide jaotamiseks 4 ekraanile samaaegselt ühest allikaseadmest, eraldades samal ajal eraldi digitaalse või analoogheli. Toetades kuni 4K 60Hz 4:4:4 8bit resolutsiooni, sobib see jaotur suurepäraselt silmatorkavate nelja ekraani digitaalsete siltide loomiseks jaemüügistsenaariumides, spordi näitamiseks mitmel ekraanil spordibaarides või huvitavate mitme ekraani hariduslike esitluste levitamiseks messidel. Jaoturil on ka eraldi optilised ja 3,5 mm audiopordid, mis võimaldavad hõlpsasti HDMI-st heli eraldada, et ühendada mitte-HDMI võimendid või helibaarid, mis on ideaalsed videote toetamiseks koos kaasahaarava mitmekanalilise heliga. Jaoturitel on ka integreeritud lüliti, et vähendada sisendsignaali Full HD-signaaliks, mis muudab vanemate kuvarite paigaldamise muretuteks, tagades samal ajal, et vaataja saab oma kuvarilt alati optimaalse pildi.
MFi cable for Apple iPhone/iPad; whitenarrow connectors also fit perfectly when using protective coverssufficient range ensured by 1 m cabledata cable with Hi-Speed USB A 2.0 connector with transfer speed of up to 480 MbpsApple MFI certification for unlimited compatibility with all lightning devices
ATEN CS22HF. Klaviatuuri pordi tüüp: USB, Hiire pordi tüüp: USB, Videopordi tüüp: HDMI. HD tüüp: Full HD, Maksimaalne resolutsioon: 1920 x 1200 pikslit, Video ribalaius: 60 Hz. Toote värv: Must, Korpuse materjal: Plast, Kaabli ...
Improve the airflow inside your chassis with the Genesis Oxal 120 3-Pack. These powerful fans, also known from the Genesis Irid 505 V2, 503 V2, and 505F, are specifically designed for cases with dense filters, providing significantly better performance than standard solutions. Looking for strong performance as well as low levels of noise? You can rely on it thanks to the fan's high performance, even at low revs, and the reinforced bearing (up to 50,000 hours). And that's not all. EQUIP YOUR CASE WITH GENESIS OXAL 120 3-PACKIntroducing the Genesis Oxal 120 3-Pack - the fans that has been featured in our most efficiently designed product, the Genesis Irid 505F case, placing it at the forefront of the best-ventilated PC cases in journalistic tests. Their high performance is the result of combining a 120 mm diameter with a maximum rotational speed of 1300 RPM, along with high static pressure. This ensures adequate airflow in PC cases that have both standard and thickened filters, which have the primary function of limiting the amount of dust entering the interior. Achieving efficient component cooling has never been easier. HIGH PERFORMANCE EVEN AT LOW REVSThe Genesis Oxal 120 is a low-speed fan, which means that you get standard fan performance comparable to that of a 1400 RPM fan at a much lower RPM. If you're looking for a balance between performance and silence, you can achieve it by adjusting the speed of the Genesis Oxal 120 to a maximum of 80%. Using the maximum revolutions (up to 100%) is recommended for demanding situations, such as overclocked components at the time of their full load. SIMPLE INSTALLATIONThe Genesis Oxal 120 3-Pack are equipped with a 3-pin connector with both male and female plugs. This allows you to connect the fan directly to the motherboard and use it to control the rotational speed based on the current temperature of the processor. But that's not all - the double plug design makes it easy to connect multiple fans together and plug them into a single fan header, making it easier to organize the inside of a PC case.
Cotton braided 8-pin cable with metal connectors, 1.8 m, black, blister - Perfect for connecting or charging Apple iPhone - Gold plated connectors for a reliable connection - Stylish design with cotton braiding and premium quality metal connectors Length 1.8 m Connectors USB 2.0 to 8-pin male connector, gold-plated, Colour Black
Ion A3 Laminator • User-friendly A3 laminator for home environments • Laminates documents and photos in 80 - 125 micron pouches • Ready to laminate after 4 minutes warm-up • Release lever disengages pouch for document re- alignment or removal • Sleep mode is activated after 30 minutes • Includes 10-pouch laminating starter kit Model name ION A3 Binding type Plastic comb, Max pouch thickness 125 micron Colour White / Grey
Slim metal USB 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMA-GL3A connects up to three USB devices to laptop or computer and also adds Gigabit network card which connects your computer to high speed network. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This compact multiport hub also handles the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface is transfer speed up to 5Gb/s. The Gigabit network adapter expands the computer with a fast and stable network connection, adds the missing RJ-45 network connector or adds another network card. The LAN adapter is compatible with 10/100/1000 Mbit/s speed and also offers a wide range of features, such as IPv4/IPv6 checksum to reduce CPU load by checksums, the crossover detection and auto-correction, support for various modes of the Wake-on-LAN feature, the work with virtual LAN (VLAN) and advanced Power Management features. In modern operating systems from Windows 8.1 above, the adapter allows easy automatic installation without the need for an Internet connection. The port replicator is the ideal accessory for ultrabooks with a small number of USB-A ports and without network card. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Some phones and tablets with the Android operating system, such as the Samsung S9+, can be connected to the Internet with a network Ethernet cable with suitable adapter* thanks to this hub. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. USB Outputs: 3x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. RJ-45 Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN feature support in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection and Link Change Wake-up. Supports ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. RealWoW! technology support allows remote wake up over the Internet. Advanced Power Management features:The adapter supports advanced power management to reduce losses during standby or light traffic on the network. It further supports advanced power saving when the Ethernet cable has been disconnected. Supports Advanced Configuration Power Management Interface (ACPI). Supports Power Management offload (ARP & NS). Supports Microsoft Always On Always Connected (AOAC). Supports Intel Converged Platform Power Management (CPPM). Supports Link Power Management (LPM). Supports Operating System-directed Power Management (OSPM). Supports IEEE 802.3az EEE (Energy Efficient Ethernet). Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Power supply via USB bus (USB bus power). Dimensions 90 x 23 x 13 mm. Weight 38 g (incl. cable). USB cable length 20 cm. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions (WARNING - check with the Android device manufacturer if the Ethernet connection is supported). Package contains: SuperSpeed USB multi port hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
External USB audio adapter AXAGON ADA-12 easily and quickly adds missing headphones output or microphone input to your computer. It will also serve well as a replacement for the broken original integrated sound card in the notebook. The sound card is suitable for desktop computers and notebooks and allows you to connect headphones or active speakers and a microphone. Adapter metal housing is made of aluminum and thus provides perfect mechanical protection. Fixed cable guarantees sufficient flexibility. The sound card together with the headset will form an ideal accessory for online communication programs such as Skype, Zoom, MS Teams etc. The card is easy to install, just plug the sound card into the computer's USB port and the rest will be done automatically. Input: 1x USB 2.0 Full Speed USB port, backward compatible with USB 1.1. USB type A male connector located on a fixed 15 cm cable. Audio output: 2-channel analog 16-bit output (3.5 mm stereo jack): stereo output for headphones or active speakers. Audio input: 1-channel analog 16-bit input (3.5 mm stereo jack): mono microphone input. Sampling rate, resolution and output converter (DAC) noise: analog - 44.1 / 48 kHz @ 16 bit for playback, signal-to-noise ratio (Output SNR) 93dB, harmonic distortion (Output THD+N) -70dB. Sampling rate, resolution and input converter (ADC) noise: analog - 44.1 / 48 kHz @ 16 bit for recording, signal-to-noise ratio (Input SNR) 83dB, harmonic distortion (Input THD+N) -76dB. Other features: Easy to install thanks to full Plug and Play support. Possibility to connect your device while running thanks to the Hot Plug support. Compliant with the USB Audio Device Class specification v1.0. Adapter power supply via USB (bus power) - no auxiliary power supply required. Miniature dimensions of 29 x 29 x 12 mm, cable length 15 cm. Weight 16 g. Setting up a sound card in Windows allows: adjusting volume and balance of speakers, enhanced speaker features: Bass Boost, Virtual Surround Sound, Room Correction, Loudness Equalization, setting the sampling rate and bit depth for both reproduction and recording, setting the automatic level of gain for the microphone (Automatic Gain Control), setting the manual level of gain for the microphone. Supported OSs: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Compatible with all Internet telephony programs using the sound card. Package contains: audio adapter, printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.
Miniature metal USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-M1A fast and easy connects up to four USB devices to laptop or computer. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This small travel hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 70 x 24 x 18 mm. Weight 35 g (incl. cable). USB cable length 20 cm. Power / Charging: USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
BenQ ScreenBar Pro on nutikas monitorivalgusti, mis pakub optimaalselt reguleeritud valgustust, vähendades silmade väsimust ja parandades tööefektiivsust. Selle kompaktne ja stiilne disain sobib ideaalselt igale töölauale, tagades ühtlase valgustuse ilma ekraani peegeldusteta. • Automaatne heleduse ja värvitemperatuuri reguleerimine • Lihtne paigaldus monitori ülaosale • Vähendab silmade väsimust • Kompaktne ja ruumisäästlik disain • Ei tekita ekraanil peegeldusi
The HDMI extender kit is a high-performance video signal extender system consisting of transmitter and receiver modules. Extends the range of the Full HD audio-video signal up to 120 m using a CAT6 network cable (point-to-point connection). Additionally, you can use network switches and single receiver modules (DS-55518) to transmit video content over your existing network infrastructure (IP connection) to up to 253 displays and extend the coverage to an unlimited distance. Additionally, the integrated bidirectional infrared (IR) signal interface allows remote control of the input signal source via the output screen (on the receiver side). The solution allows you to extend the audio-video signal in Full HD via a CAT 6 cable over an unlimited distance via your existing network infrastructure or using commercially available network switches Extends the range of the Full HD audio-video signal via a CAT 6 cable to a distance of up to 120 m (point-to-point connection) Resolution support up to max. 1080p/60 Hz, Full HD Support for CAT 6, CAT 6A, CAT 7, CAT 8 network cables The infrared (IR) signal interface allows remote control of the input signal source via the output screen You can use additional receiver modules (DS-55518) and your existing network infrastructure to display video content on up to 253 screens (IP connection) Housing: metal Suitable for wall mounting