Varia lisaseadmed

• USB-C Male ( Thunderbolt 3/4 compatible) • Supports HDMI resolution up to 4K/30Hz • Gigabit Ethernet port with speeds up to 1000Mbps • USB-A 3.2 Gen1 Super speed (5Gb/s) port x 2 • USB-C 3.2 Gen1 Super speed (5Gb/s) port x 1 • USB-A 2.0 x 1 • Micro SD card x 1 • TF Card x 1 • USB-C charging port compliant with USB Power Delivery (PD) 3.0 technology • Power Delivery: 100W Max. • Aluminum casing for heat dissipation • Simple Plug-and-Play installation • Cable length: 25cm

Length: 2 meters With a 2-meter cable, you can comfortably use your phone while charging, whether youre lying on the couch, sitting at your desk, or charging from an outlet behind the bed. A longer cable means greater comfort and mobility. Fast charging with 2.4 A current A 2.4 A current means your device will charge faster than with standard cables with lower current. More amps = shorter charging time and less waiting. This is the perfect solution when time is of the essence. Data transfer up to 480 Mbps With a data transfer speed of up to 480 Mbps, you can move photos, videos, or documents between your phone and computer in seconds. Thats up to 60 megabytes per second, making transferring large files fast and secure. Lightning connector - perfect for Apple devices The CL-193 cable ensures full compatibility with Apple devices. It provides stable charging and fast data transfer, making it an essential accessory for iPhone users with a Lightning connector.

Triipkoodilugeja Equip 1D

Varustatud 351023 Traadita 1D baarikoodi lugejaga koos toega

USB 1D LASER BAR KODE SKANNER EQUIP 351022 - Robust ja veekindel

2D koodiskanner - EQUIP - 351024 - Juhtmevaba - Veekindel - Kandesüvend

• 2D IMAGE Barcode Scanner Image Sensor: 1MP (1280 x 800) • High-Resolution Imaging: Captures sharp and detailed images for accurate decoding. • Precise scanning of 1D & 2D barcodes, ( barcodes & QR code ) • Efficiently deciphers linear barcodes for retail and inventory management. • Durable Construction: Robust design to withstand daily use and potential drops. • Protected and water-resistant (IP54) • Wide Scan Range: Reads barcodes from various distances and angles. • Multiple Scanning Modes: Options for continuous, single, or presentation mode scanning. • Plug-and-play functionality for quick setup • Omnidirectional Scanning: Reads barcodes from any angle, reducing the need for precise alignment.

Extender over Cat6 HDMI 4K/60Hz via IP 1G or up to 120m/200m with PoE, max. 253 receivers, IR control - Set This device enables HDMI AV signal transmission in UHD resolution (4K/60Hz) over distances up to 200 m in a point-to-point connection using a CAT6 network cable (or higher). With PoE support, no external power supply is required. The HDMI IP Extender Set 4K/60Hz allows HDMI AV signals to be transmitted in ultra-high 4K resolution (4096x2160p at 60Hz) over long distances of up to 200 meters-thanks to an efficient point-to-point connection using a CAT6 or higher network cable. The set is fully powered via a PoE network switch; no external power adapters are needed. IP expansion allows flexible system scaling and supports up to 253 receivers (displays) for point-to-multipoint transmission. Additionally, the existing 1G network infrastructure can be used, allowing unlimited signal range by cascading through network switches. For even greater flexibility, additional receivers (RX) are available separately (model: DS-55354). Outstanding image quality is always maintained: with low latency of only 150220 ms, the transmission is smooth and razor-sharp in UHD. Another practical feature is the integrated IR interface, which enables remote control of the input source directly from the output display. The device is also suitable for wall mounting, saving space. Ideal for professional AV applications, home theater setups, or corporate use, this HDMI IP extender set combines top-quality transmission with maximum flexibility. Key Features: Long-range transmission: AV signal transmission via CAT6 (or higher) cable up to 200 m - point-to-point connection IP expansion capability: Supports up to 253 receivers (displays) - point-to-multipoint connection Flexible and efficient via IP: Uses existing 1G network infrastructure or additional 1G network switches to transmit signals over unlimited distances - cascading Expandable options: Additional receivers (RX) available separately (model: DS-55354) Flexible installation with PoE: Fully powered via PoE network switch - no external power supply required Exceptional image quality: UHD transmission up to 4K/60Hz (4096x2160p) with low latency of 150-220 ms IR interface: Allows remote control of the input source from the output display Supports CAT6 or higher network cables Wall-mountable design

HDMI 4K/60Hz Fiber Optic Extender over IP 1G or up to 40 km/300 m, HDMI Loop-Out, IR Control - Kit This kit enables UHD HDMI signal transmission (4K/60Hz) over distances of up to 40 km (single-mode) / 300 m (multi-mode) in a point-to-point configuration. The HDMI Fiber IP Extender 4K/60Hz is the perfect solution for transmitting high-quality HDMI signals over long distances. It supports UHD 4K/60Hz (3840x2160p) video with minimal latency of just 80-140 ms, delivering razor-sharp images with virtually no delay. Using modern fiber optic technology, the system achieves a maximum transmission distance of up to 40 km in single-mode or 300 m in multi-mode, making it ideal for professional AV installations. By leveraging existing 1G network infrastructure or additional 1G network switches, the extender kit allows flexible and efficient signal transmission. Range can also be extended further through cascading, enabling virtually unlimited distances. For additional flexibility, the system supports LC and SC SFP modules as well as single-mode and multi-mode fiber cables. Compatible SFP modules are sold separately (Single-mode: DN-81002, Multi-mode: DN-81000). In addition to excellent video quality, the kit provides a separate audio output via a 3.5 mm stereo jack for flexible audio transmission. HDMI Loop-Out allows a local monitor to be connected directly to the transmitter (TX), while the integrated IR interface enables remote control of the input source from the output display. With its long range, high-quality video, and versatile expansion options, the HDMI Fiber IP Extender Kit is ideal for conference rooms, control centers, digital signage, and broadcast studios. Key Features: Long-range transmission: AV signal over fiber - Single-mode up to 40 km, Multi-mode up to 300 m (point-to-point) Flexible and efficient over IP: Utilize existing 1G network infrastructure or 1G switches for virtually unlimited distance - supports cascading SFP modules sold separately: LC Single-mode (SM): DN-81002, LC Multi-mode (MM): DN-81000 Wide compatibility: Supports LC and SC SFP modules, as well as single-mode and multi-mode fiber cables Exceptional image quality: UHD 4K/60Hz (3840x2160p) transmission with low latency of 80140 ms Additional audio output: 3.5 mm stereo jack for separate audio transmission HDMI Loop-Out: Connect a local monitor to the transmitter (TX) IR interface: Remote control of the input source from the output display

FNIRSI 2C53T portable 3in1 oscilloscope multimeter signal generatorThe FNIRSI 2C53T combines the functions of a 2×50 MHz/250 MSa/s oscilloscope with an 8-bit ADC and 16 kpct memory buffer per channel (pre/post-trigger), a multimeter up to 19999 and a 50 kHz signal generator. Input impedance is 1 MΩ ∥ 15 pF with AC/DC/GND switching. The rugged ABS housing with silicone overlays, 2.8-inch 320×240 px screen and 3000 mAh battery (up to 4 h of operation) guarantee mobility and continuous measurements even in harsh environments. The device is CAT II 300 V certified, with dual ceramic fuses and an anti-overvoltage circuit. With the ability to save waveforms and update firmware, you are always in control of your results and have access to the latest features.Color screen and multimeterThe 2.8″ display with a resolution of 320×240 px presents waveforms in full color with an "infinite afterglow" function (fixes the signal trace on the screen, even after it fades), keeping the waveform trace on the screen. Y-T, Rolling and X-Y modes (so-called Lissajous figures for analyzing phase differences between signals) make it easy to observe phase relationships, and high brightness guarantees readability in all conditions. A built-in multimeter with up to 19999 resolution allows you to measure DC/AC, low and high currents, resistance, capacitance, diodes, temperature and continuity (buzzer). Smart protections protect the user and equipment from overload.Advanced hardware architectureThe professional ARM + FPGA + high-performance ADC combination, used in desktop oscilloscopes, provides fast triggering and faithful representation of signals. The triggering system offers Edge (rising/falling), Pulse Width, Video and Slope modes with pre-trigger up to 50% and post-trigger up to 50%, so even the shortest anomalies are recorded without loss of detail.Signal generatorThe built-in function generator offers voltages up to ±400 V and frequencies up to 50 kHz and 13 waveforms (sine, square, triangle, sawtooth, ramp, pulse, noise, etc.) with adjustable offset (signal offset relative to zero) and amplitude in 10 mV/div steps, allowing testing of filters, amplifiers and analog circuits without additional hardware.Automatic measurement setupThe AUTO function adjusts the range and trigger with a single button, allowing instant waveform viewing without time-consuming setup. Support for additional Single and Normal modes streamlines work for quick field measurements. One click is all it takes to save a screenshot of the waveform to the oscilloscope's memory or directly to a computer via USB. This makes it easy to archive results and further analyze them in any environment.Isolated measurement channelsTwo completely independent CH1 and CH2 inputs with 50 MHz bandwidth eliminate mutual interference, improving measurement precision. The 250 MSa/s sampling rate reproduces PWM pulses and power supply ripples with maximum fidelity.Rugged constructionThe ABS (Acrylonitrile Butadiene Styrene - a high-strength plastic) silicone-coated housing provides drop and shock resistance, and the gold-plated PCB (Printed Circuit Board) tracks are corrosion-resistant. The 3,000 mAh battery guarantees up to 3 hours of operation. The fold-out stand allows the device to be positioned at any angle, while ergonomic buttons and a USB-C port provide convenience in handling and charging.Included:FNIRSI 2C53T portable 3-in-1 oscilloscope10× measurement probes (2 pcs.)Probe with crocodile clampsCables for the multimeterCharging cableCarrying bagUser's manual Product parametersScreen2.8-inch HD color displayResolution320 × 240Charging specificationsUSB-C (5 V/1 A)Rechargeable batteryLithium-ion 3000 mAhSupported functionsOscilloscope, signal generator, multimeter (see function parameters for details)Standby time6 h (laboratory maximum)LanguageChinese and EnglishDimensions167 × 89 × 35 mmWeight300 g Oscilloscope parametersChannelstwo-channelSampling250 MSa/sAnalog bandwidth50 MHz (each channel independently 50 MHz)Memory depth1 kpointsImpedance1 MΩTime base range10 ns - 20 sVertical sensitivity10 mV/effect - 10 V/effect (×1)Maximum measurement voltage±400 VTrigger modeAUTO/Normal/SingleDisplay modeY-T/Rolling/X-YCouplingAC/DCTrack persistenceOFF, 500 ms, 1 s, ∞.Mathematical functions8 basic operations + FFTWaveform dump recordingyesWaveform image exportyesCursor measurementyes Signal generator parametersChannelsingle channelFrequency1 Hz - 50 kHzAmplitude0,1 - 3,0 V Multimeter parametersDC voltage1.9999 V / 19.999 V / 199.99 V / 1000 V ±(0.5 %+3)AC voltage1.9999 V / 19.999 V / 199.99 V / 750.0 V ±(1 %+3)DC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.2 %+3)AC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.5 %+3)Resistance9.999 MΩ / 1.9999 MΩ / 199.99 kΩ / 19.999 kΩ ±(0.5 %+3); 1.9999 kΩ / 199.99 Ω ±(2.0 %+3)Capacitance9.999 mF / 99.99 mF ±(5.0 %+20)Temperature-55 °C - 1300 °C (-67 °F - 2372 °F) ±(2.5 %+5)Diode measurementYesContinuity testYes

Fanttik S1 Apex Deluxe Electric ScrewdriverThe Fanttik Fold S1 APEX Deluxe is a versatile electric screwdriver with an intuitive LED display, torque adjustment and four-angle handle adjustment. With 20 S2 bits, a magnetic case and a capacious battery, it is a tool suitable for a variety of assembly and repair tasks.Precise torque adjustmentThe device allows you to set the torque from 0.5 to 7 Nm, selectable in 8 levels via an adjustment ring. The LED (Light Emitting Diode, light emitting diode) display shows the current torque and the battery charge level, providing full control over the working parameters.Foldable handleThe articulating mechanism allows you to set the handle at 0°, 24°, 48° or 72°, which makes it easier to access hard-to-reach places and increases the ergonomics of work. Such a solution reduces hand fatigue during prolonged use.Two speed modesThe screwdriver offers two speed modes - 100 rpm and 250 rpm - selectable by a button on the housing. This makes it possible to adjust the speed to suit the type of screws and materials, preventing damage.Magnetic case and bit setThe set includes 20 of the most commonly used bits made of hardened S2 steel (S2 alloy steel), placed in dedicated locations. The magnetic case protects the tools from getting lost and makes it easy to stay organized.Powerful battery and lightingThe built-in 2,500 mAh lithium-ion rechargeable battery allows for long operation without frequent charging. The USB-C (Universal Serial Bus Type-C, a universal connector for data and power) port is compatible with popular chargers. The integrated LED (Light Emitting Diode, a light-emitting diode) light turns on automatically, making it easier to work in low-light areas.Includedelectric screwdrivermagnetic caseS2 x20 bitsUSB-A to USB-C cableinstruction manual ManufacturerFanttikModelA1 Apex DeluxeDimensions of the screwdriver275 x 50.5 x 48.5 mmTorque0.5-7.0 NmMaximum torque8 NmWeight (with case)1245 gCharging voltage5V/2ARated voltage3.7VBattery capacity2500 mAhSpeed (no load)100 rpm (low), 250 rpm (high)Charging time2-3 h

【Cutting Edge 16K DisplayPort Cable】UGREEN16K DisplayPort cable 2.1 supports high resolutions 16K@60Hz, 8K@240Hz, 4K@240Hz. And backward compatible with Display Port 1.4 1.3, 1.2. Single-screen video output of 16K@60Hz (DSC 1.2a), and dual-screen supported. The DP to DP cable also supports HDR, HDCP 2.2, FEC forward error correction and UHBR10 which guarantee your immersive viewing experience. (Note: 20-pin is disabled with no power. No need to worry about the 20-pin issues.) 【VESA Certified 80Gbps DP Cable 2.1】This Display Port 2.1/2.0 cable features an unprecedented bandwidth of 80Gbps, nearly 3 times what was available in the previous DP 1.4 spec. Stable and high-speed transmission without signal loss. The DisplayPort cable also backward compatible with previous DP 1.4 and DP 1.2 standards. The monitor cable meets the VESA Standard and supports 3D&HDR and Dolby&eARC to provide you with amazing sound and image quality. 【Optimized for Game Enthusiasts】The DP cable 2.1 is highly recommended for game setups as it works well with game monitors and graphics cards, delivering high-quality video and audio signals with no lag or interference. It supports FreeSync and G-Sync, which are essential for gaming. You can easily connect multiple monitors with Multi-Stream Transport (MST). Variable refresh rate (VRR) and auto low latency mode (ALLM) bring you smoother game experience especially in FPS, 3A and MOBA games. 【Ultra Durability】UGREEN DisplayPort cable port with no buckle design can prevent accidental damage. DP cable 2.1 is made of 28AWG tinned copper and tinplate which features triple shielding and resistance with EMI. Aluminum alloy housing is resistant to rust and can accelerate heat dissipation. The Display Port cord has a strong nylon braided jacket, which is 10X more durable than PVC. It can provide higher connectivity and longer service life for better signal transmission. 【Wide Compatibility】UGREEN 16K@60Hz DisplayPort to DisplayPort cable is compatible with all devices with DP ports, compatible with Nvidia RTX 3070/RTX 3080/RTX 3090/RTX 4090/RTX 4080ti/RTX 4070ti graphics cards, and AMD Radeon RX 6800 XT/RX 6900 XT/RX 7900 XT graphics cards, and Odyssey G8/G9, Ben Q, Alienware, LG Ultragear monitors, HDTV, Fire TV, computer and others. Support DP, DP++ modes, backward compatible 2.0/1.4/1.3/1.2 DisplayPort 2.1 Reinforced Joint Bare Copper Nylon Braided

CSV-1009 DisplayPort™ 2-in-1 Bi-directional Switch 8K The Club 3D® CSV-1009 is a versatile DisplayPort™ switch that allows you to switch between two sources on one screen or route one source to either of two screens at 8K resolution. DisplayPort™ 2-in-1 Bi-directional Switch for 8K; it can switch either of two sources to one display or switch one source to either of two displays. Supports the DP1.4 specification. Video resolution up to 7680x4320P at 60Hz. Supports HDR, DSC, and HDCP pass-through. The toggle button lets you quickly switch between 2 video sources or 2 monitors, and the blue LED indicators on both sides show which port is selected for operation. The longer/thinner the cable, the greater the risk of signal instability. To ensure maximum performance, use our Club 3D® cables. Power can be drawn through the DP male port from the connected device. If some devices are not compatible with power supplied via the DP male port, power can instead be supplied to the switch via the Type-C® female port.

EDBAK ULS4337 Universal LED System for 4 cabinets 600 x 337.5 | Black

1xNumber of displays supported, Maximum weight capacity (per display) 15 kg, Maximum weight capacity 15 kg, Maximum screen size 61 cm (24"), Mounting type Desk, Minimum VESA mount 75 x 75 mm, Maximum VESA mount 100 x 100 mm, Colour Black

Logilink Professioneller Mikrofonarm

LogiLink Dual monitor mount 17-32 10kg per arm

One for All Monitor Mount Smart Single must DM 2110

LC-Power monitori kinnitus LC-EQ-A49w Monitorhalter

WALL MOUNT FOR LARGE TVS 3790 INCHES MACLEAN MC-881 N The Maclean MC-881 N is a sturdy wall mount designed for mounting large TV screens ranging from 37 to 90 inches. Its an excellent choice for living rooms, bedrooms, offices, conference rooms, and commercial spaces where a stable mount, an attractive appearance, and convenient screen adjustment are essential. The Maclean MC-881 N mount allows you to securely mount both popular mid-sized TVs and truly large models, including 65-, 75-, 85-, and even 90-inch screens. STURDY MOUNT FOR LARGE TVS The Maclean MC-881 N is made of solid steel, ensuring high durability and reliable support for the TV. The mounts maximum weight capacity is 65 kg, making the Maclean MC-881 N suitable for many large and heavier LED, LCD, OLED, and QLED TVs. This is particularly important when mounting a large TV on the wall, where stability and safety are absolutely crucial. The steel construction enhances safety and allows you to enjoy your large screen without worrying about the mounts stability.

KVM või 4 HDMI® ja 1 USB Type C sisendi videohaldusSujuv ümberlülitamine, EDID-haldus, 5 multivaate režiimi ja KVM-funktsioon hiire rändamisegaJuhtimine OSD-menüü, IR-kaugjuhtimispuldi, kiirklahvide, TCP/IP ja RS-232 käskude abil3,5 mm ja TosLink audio väljundid helitugevuse reguleerimisega2-aastane garantiiSee täiustatud HDMI® 4K60 lüliti suudab kuvada kuni 4 allikat korraga 4K ekraanil, KVM-juhtimisega, ühendades ka USB Type B pordid. Valida on 5 erinevat multivaate režiimi: Single, PIP, PBP, 3xWIN ja 4xWIN, samal ajal kuiAV Interface: HDMI®, Type CConsole Interfaces: USBInterface Standard: HDMI® 2.0, USB 2.0Maximum Resolution: 4096x2160@60Hz 4:4:4 8BitHDCP Support: 2.2Supported Audio: LPCM, AC3, DD+, DTS, DTS-HD Up to 7.1 channelSeparate Audio Ports: 3.5mm, TosLink (Optical)Serial Interface: 4-pin phoenix connectorConsole Number: 1Max Number PC/Server: 5Cascadable: NoSwitching Method: OSD menu, IR remote control, hot-keys (KVM), TCP/IP and RS-232 commands19" Rack Mountable: NoSpecial Features: Multiview, Seamless, USB roaming, Audio volume controlConnectorsConsole Interfaces: 2x HDMI® (Female), 2x USB Type A (Female), 3.5mm Audio (Female), TosLink (Female) PC/Server Interfaces: 4x HDMI® (Female), USB Type C (Female), 4x USB Type B (Female)Other Interfaces: RS-232 4-pin phoenix, RJ45, USB Type A (Female) service Power: 5.5/2.1mmPhysical PropertiesDimensions WxDxH: 219x146x44mm (8.62x5.75x1.73in)Housing Material: MetalNet Weight: 1.3kg (2.87lb)Operating Temperature: 0°C - 40°C (32°F - 104°F)Storage Temperature: -20°C - 60°C (-4°F - 140°F)Humidity: 10 - 70% RH (non-condensing)Power Requirements: 12VDC 2.5AColour: BlackMiscellaneousPackaging Type: Carton BoxPackaging Dimensions: 360x260x75mm (14.17x10.24x2.95in)Gross Weight: 1.8kg (3.97lb)Warranty (Years): 2Product Compliance: CE, UKCA, FCC, RoHS, REACH & California Proposition 65Package ContentsKVM SwitchIR remote control4-Pin Terminal Block2x Mounting ears with screwsMulti-Country Power Supply (EU, UK, US & AUS)Lindy ManualPurchasing InformationNo.: 32330EAN: 4002888323307

Lisage täiendavaid HDMI over IP-vastuvõtjaid, et luua suuremaid võrgustatud jaotussüsteeme. Lihtne, skaleeritav lahendus 1-st kuni paljudele paigalduste arendamiseks Toetab kuni 1920x1080@60Hz resolutsiooni Toetab saatja infrapuna laiendamist 2-aastane garantii IP laiendajad pakuvad usaldusväärset HDMI-signaalide laiendamist võrguühenduses, võimaldades punktist-punkti ja segakonfiguratsioone, kui neid kombineeritakse võrguseadmetega, näiteks kommutaatoritega. IP-ühenduse kasutamine tagab odava ja skaleeritava pikenduslahenduse, mida saab hõlpsasti seadistada mitmesuguste väikeste või suuremate stsenaariumide jaoks. Lindy HDMI & IR over IP-vastuvõtja on täiendav lahendus HDMI-signaalide laiendamiseks suuremate vahemaade taha kohaliku võrguühenduse kaudu ja skaleeritavate IP-installatsioonide loomiseks, kasutades mitut vastuvõtjat, kui neid kombineeritakse 38398 ja võrguseadmetega. Punkt-punkt ühendusena toetab laiendaja kuni 150m kaugusi, kasutades Cat.6 kaablit, või kui seda kombineerida võrgukommutaatoriga, saab seda laiendada palju suuremate jaotussüsteemide jaoks kuni 3-kihiliste võrguseadmetega. Vastuvõtjate lisamine annab täiendavat paindlikkust, et levitada sisu erinevatesse kohtadesse või kaugemal asuvatele ekraanidele, mis sobib suurepäraselt kasutamiseks jaekaubanduses, ühendatud kontoriinstallatsioonides või haridusasutustes. Toetades kuni Full HD 1920x1080@60Hz 4:4:4 8bit, pakub see laiendaja kvaliteetset sisu, mis sobib hästi silmatorkavaks digitaalseks märgistamiseks, elamute paigaldamiseks või AV jaotamiseks haiglates. Technical details Specifications AV Interface: HDMI Interface Standard: HDMI 1.3 Supported Bandwidth: 6.75 Gbps Maximum Distance: 150m (492.12ft) Maximum Resolution: 1920x1080@60Hz 4:4:4 8bit HDCP Support: 1.4 EDID Pass Through: - Supported Audio: 2 Channel PCM Separate Audio Ports: - IR Support: 20-60 kHz CEC Support: - Serial Interface: - Transmission Protocol: IP (H.265 video compression) Transmission Medium: 1 x Cat.5e/6 Laser Class (only for Fibre): - Wavelength (only for Fibre): - Chipset: SSD203D Special Features: - Connectors Transmitter Input: - Transmitter Output: - Receiver Input: RJ45 (Female), IR (Female) Receiver Ouput: HDMI (Female) Bidirectonal Ports: - Power: 5.5/2.1mm DC socket Physical Properties Dimensions WxHxD: 88x61.2x16.5mm (3.46x2.41x0.65in) Housing Material: Metal Nett Weight: 0.236kg (0.52lb) Operating Temperature: -10°C - 50°C (14°F -122°F) Storage Temperature: -20°C - 60°C (-4°F - 140°F) Humidity: 20 - 90% RH (non-condensing) Power Requirements: 5VDC 1A Colour: Black Miscellaneous Packaging Type: Carton Box Packaging Dimensions: 146x105x65mm (5.75x4.13x2.56in) Gross Weight: 0.357kg (0.79lb) Warranty (Years): 2 Product Compliance: CE, UKCA, FCC, RoHS, REACH & California Proposition 65 Package Contents Receiver unit IR receiver cable, 1.5m Multi-Country Power Supply (EU, UK, US & AUS) Lindy manual Purchasing Information No. 38399 EAN: 4002888383998

5m HDMI cable type A male - HDMI type A female, (extender) 1.4 version, bulk cable

ICY BOX kettaboks 2.5" to 3.5" HDD Converter, Converts a 2.5" SATA HDD or SSD to a 3.5" SATA HDD, Toolless HDD installation (EasySwap®), Enables the use of a high speed 2.5" SSD in a 3.5" case, With ...

CCF-USB2-AM5P-6 Premium quality USB 2.0 A-plug MINI 5PM 6ft cable with ferrite core USB 2.0 cable A plug/mini-USB 5PM 6ft cable 30u" gold-plated contacts suitable for USB 2.0 high-speed data transfer Ferrite core filter

Digitus Passive PoE kaabel kit, 5 LGW

USB 2.0 A-plug to Micro B-plug 0.3 m cable, bulk package USB 2.0 cable for modern electronic devices with compact Micro USB 5 pin male connector Gold-plated contacts suitable for USB 2.0 high-speed data transfer  

0.9m 2x USB 2.0 A/mini-B M USB-kaabel 0,9 m Micro-USB A Mini-USB B Must

Producer: Gembird Product class: Patchcord network cable Wiring type: UTP - unschielded twisted pair cable, 4 pairs Length: 2 m Category: 5e Coating type: PVC - polyvinyl chloride Plug 1 type: RJ45 Plug 2 type: RJ45 Boot: non-snag-proof Colour: green

Original part number CCP-USB3-AMBM-10 Gembird USB 3.0 A- B 3m cable Class of product Cables - USB plugs 1x male USB A-type1x male USB B-type Cable length 3 m Other information Other information Gold plated plugs No Cable colour Blue Additional information Standard USB 3.0

Featuress- Extends the distance to your USB device up to 5m (16').- USB specification version 2.0 compliant.- Fully compliant with USB Electrical and Timing Specs for USB Hubs.- USB IF Approved.- No power adapter required.- Multiplatform support : Windows, Mac.- OS Support: Windows 2000, Windows XP, Mac and FreeBSDPackage Contents- 1x USB 2.0 Extender Cable- 1x User InstructionsTypeExternal YesPurpose USB 2.0 Verlängerung with Signalverstärkung.Portfrom USB-A plugto USB-A SocketLength 5 m

Original part number 2L-5203UP Product name ATEN KVM Cable (HD15-SVGA, USB, USB) - 3m Producer Aten Class of product KVM cables Wire type multilead cable Plug 1 type D-SUB 15 maleUSB A-type Plug 2 type D-SUB 15 male Colour grey-black Length 3 m

Original part number CE700A-AT-G Product name ATEN CE700 USB Console Extender Producer Aten Class of product KVM extenders Supported keyboard/mouse/display ports USB, USB, DSub-15 Maximal distance 150 m Possiblity of sending audio signal No

Key Featuress:- Flexible switching for an uninterrupted multi-platforms experience.- Control and manage four computers using a single USB keyboard and mouse and monitor.- Simultaneous and independent PC user-programmable switching.- High 2048 x 1536 pixels VGA resolution.- USB interface power supply.- Easy switching between computers with keyboard hotkeys push button and software selection.- At-a-glance LED display for easy monitoring of PC activity.- True Plug-and-Play operation without any software installation or power supply.- Windows-based switching software utility included.DesignNumber of Hosts 4Supported Maximum Resolution 2045 x 1536 pixelsDevice Switchoveron the Deviceper KeyboardCabel SetsQuantity 4Length 1.8 mLEDPort 4Terminal-Device ConnectionsUSB 2VGA 1Connections per ComputerUSB 1VGA 1Scan Intervals Auto-Scanning

USB 2.0 Repeater Cable 5m

PCI-Express card, 4 x USB 3.0, VIA chipset

Connector 1DisplayPortConnector 2HDMIGenderMale/FemaleConnector kontaktid plaadistuseCopperVärv tooteMust

StarTech.com DP2DVI2MM6. Kaabli pikkus: 1,8 m, Pistmik 1: DisplayPort, Pistmik 2: DVI-D. Kaal: 158 g, Laius: 40 mm, Kõrgus: 15 mm

V.2.0, CC-HDMID-15