The NewStar desk mount, model FPMA-D550DDVBLACK is a tilt-, swivel and rotatable desk mount for 2 flat screens up to 32”. This mount is a great choice for placement on desks using a desk stand. NewStar's versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount has a height of 91 centimetres. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. NewStar FPMA-D550DDVBLACK has one pivot point and is suitable for screens up to 32". The weight capacity of this product is 8 kg each screen. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area. All installation material is included with the product. Min. screen size: 10 Max. screen size: 32 Desk mount: Stand Mount: Desk Tilt (degrees): 90° Swivel (degrees): 180° Rotation (degrees): 360° Height adjustment: Manual Height: 91 cm
The compact aluminum AXAGON EE35-XA3 ALINE external box with a high-speed USB 3.2 Gen 1 (USB 3.0) interface intended for 3.5" SATA disks. The UASP support allows you to enjoy the most possible speed of modern hard drives. Reading of S.M.A.R.T. information monitoring the condition of the external disk. Supports spinning down of connected disks as well as the box. Durable cast aluminum case for perfect mechanical protection of the disk and excellent heat dissipation. The decently shaped case with a brushed surface that provides elegant look and prevents unwanted fingerprints. Easy mounting of the hard disk as well as automatic installation can be handled even by a layman and easily create an external disk. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transmission rates up to 5 Gbit/s. Connection via micro USB type B female conector. Device support: SATA II - 3 Gb/s (300 MB/s) interface, Supports 3.5" HDD. Features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Supports 3.5" SATA III / II / I disks of all capacities without limitation. Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the SATA/300 interface used (theor. 3 Gbit/s). Supports UASP (USB Attached SCSI Protocol). SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown support - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Connection via durable large USB 3.2 Gen 1 Type B female connector. An USB-B / USB-A cable 80 cm long is included. A blue, decent LED indicates the connection to the computer's USB port (permanent light) and the data transmission (blinking). The durable box body is a cast aluminum alloy, the box faces are plastic. Simple disk installation - the guides are mounted on the disk, the disk is plugged directly into the SATA connector of the motherboard, and inserted into the box body; the front panel is fastened with two screws using a screwdriver that is included. Compact adapter dimensions 180 x 120 x 32 mm. External box weight 244 g (without cables and disk). Power supply: Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Power switch on the rear panel of the box. AC adapter dimensions 74 x 36 x 91 mm (incl. fork). AC adapter weight 128 g (incl. supply cable). Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 external box for 3.5" SATA disk, USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, mounting strips, screws and the screwdriver, a stand that allows the box to be operated in upright position.
Pikenda USB 3.0 signaale 5 m võrra meie aktiivse USB 3.0 pikenduskaabliga. Veelgi suurema paindlikkuse saavutamiseks saab kaks aktiivset pikendust ühendada, et luua 10 m pikkune USB 3.0 kaabel. 5 meetri USB 3.0 aktiivne pikendusjuhe kordusjuhe Toetab kuni 5Gbps ülekandekiirust Plug & Play - ei vaja spetsiaalset tarkvara paigaldamist Tagasi ühildub nii USB 2.0 kui ka USB 1.1 seadmetega Ühendused: USB-istmiku tüüp A ja USB-naise tüüp A Veelgi suuremate vahemaade saavutamiseks ühendage lihtsalt kuni 2 kaablit üksteise järel*. Ühildub USB 3.0-ga varustatud arvutitega * Sõltub riistvarast Märkus: USB 3.0 kaabli maksimaalne pikkus, mida saab selle pikendajaga kasutada, on 1,2 m.
PCIe-3.0-Adapter für zwei M.2-SSDs, 1x M.2-NVMe- und 1x M.2-SATA-SSD, Größen bis 22110, ohne Kapazitätsgrenze, aktive Kühlung mit Lüfter, Low-Profile-Bracket inklusive
The robust ROG Herculx Graphics Card Holder securely fortifies even the most powerful cards, plus offers an easy-to-use design and extensive compatibility. Stand design is compatible with a variety of chassis and doesn’t occupy PCIe slots. Offers a support height of 72-128 mm, delivering a strong, adaptable design. An adjustable wheel and release button enable easy, toolless setup and removal. Included spirit level simplifies setup. Embedded 3D ARGB element is compatible with Aura Sync.
Premium USB-C USB-C data and charging extension AXAGON BUCM32-CF15AB SPEED+ EXTENSIONS USB 3.2 Gen 2 cable with USB-C male and USB-C female connectors. The cable is designed for very fast data transfers and notebook, phone, tablet and other mobile device charging. Enables high-speed extensions for devices with short cables, such as multiport hubs and port replicators. You will not be limited by space and the location of ports on the laptop. The cable supports up to 20 Gb/s data transfer and also allows image transfer up to 8K/60Hz Full Ultra HD resolution and audio. The cable is compatible with charging technologies Power Delivery up to 240W (depends on the extension cable), Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Connected devices can be charged with up to 5A current. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The nylon braid gives the cable ultimate strength. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 32AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-C (F) female Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB 10 Gbps - USB 3.2 Gen 2, compatible also with SuperSpeed USB 20 Gbps - USB 3.2 Gen 2x2. Backward compatible with USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports 20 / 10 Gb/s (SuperSpeed+) second generation transmission rates. Supports 20.000 / 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ dual-lane / SuperSpeed+ / SuperSpeed / High / Full / Low speed) transmission rates. Video up to 8K@60Hz Full Ultra HD resolution and audio transfer support - USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or Thunderbolt 3/4 port is required. Supported charging technologies: Power Delivery 2.0 / 3.0 / 3.1 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Support for fast charging with a current of up to 5A. Cable includes power wires 22AWG, data wires 32AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and tinned copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable as a cable extension for laptops, tablets, mobile phones and other devices with USB-C connector especially for multiport hubs, port replicators and docking stations. The maximum extension length (cable + extension cable) is 2 m. Other data: cable length 1.5 m, outer diameter of the cable 5.0 mm. Package contains: USB-C M USB-C F black cable, packed in a printed and sealed foil package with hanging hole.
The AXAGON ADS-1PSN active USB converter easily extends your computer with a RS 232 standard serial port. The seamless compatibility of the USB - serial RS232 adapter is due to the use of an original chip from the Taiwanese company Prolific. The fixed 1.5 m long USB-A cable is suitable for use with both a desktop computer and a laptop. The cable is equipped with gold-plated connectors and contacts, the very durable body of the adapter is also suitable for industrial applications. Double shielding protects transmitted signals from adverse interference. An ideal accessory for your computer to connect barcode readers, cash register printers, scanners, microcontroller programmers, CNC machines, modems, and to upgrade or configure set-top boxes, security devices, switches, transmitters and other devices. Input: USB 480Mbps interface (USB 2.0), backward compatible with USB 1.1. Connecting USB type A male connector located on a fixed 1.5 m cable. Output: 1x serial RS-232 port with a DB9 male connector integrated in the adapters body. Transmission rate adjustable in range 75 bit/s - 1000 kbit/s. Compatible with 16C950 UART, backward compatible with 16C550, 16C650, 16C750 and 16C850. Other features: Plug and Play support. FIFO buffer sending 768B and receiving 256B. Adjustable flow control Xon/Xoff, hardware or none. Adjustable word length 4, 5, 6, 7 or 8 bits. Adjustable parity (even, odd, none, mark, space), 1, 1.5 or 2 stop bits. Adjustable usage of the FIFO buffer: receiving (1 - 14b) and sending (1 - 16b). Adjustable number of the port COM1 to COM256. Power Management support. Adapter power supply via USB (bus power) - no auxiliary power supply required. Gold-plated connectors and contacts ensure a reliable connection and, by preventing oxidation, ensure a long life of the converter. Outer cable diameter 5 mm, double shielding. Original Prolific PL2303GT chipset with integrated serial line driver is used. Adapter body dimensions 35 x 56 x 17 mm, cable length 1.5 m. Adapter weight 83 g (including cable). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. Package contains: USB - serial adapter with a 1.5 m long permanently attached USB cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Cable adapter USB-C USB-A AXAGON RUCM-AFAC connects existing devices with a USB-A connector to any new device with a modern USB-C interface. Adapter is designed for quick connection of a USB hub or external drive to notebooks equipped with only USB-C connectors. It is also great for connecting a flash drive to a mobile phone with a USB-C connector. It supports data transfer speeds of up to 5 Gb/s and power supplies of up to 3A. The reduction is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. Triple shielding protects transmitted signals from adverse interference. Connectors: vstup USB-C (M) male. výstup USB-A (F) female. Other Features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB - USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0). Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0. Supports 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Cable includes power wires 22AWG, data wires 30AWG.Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Pulldown resistor 5 k. Suitable for notebooks, mobile phones and smartphones, powerbanks, tablets and other mobile devices with USB-C connector. Other data: cable length 0.2 m, 4.2 mm outer diameter. Package contains: USB-C M USB-A F cable adapter, packed in a printed and sealed foil package with hanging hole.
Full-size RJ45 connector LEDs on RJ45 connector to indicate activity and link status. Support PXE boot, Wake-On-LAN, MAC pass through if host notebook supports Faster than Gigabit: For smoother video conferencing and seamless streaming using 2.50Gbps switches or routers,this adapter doubles the performance of a traditional Gigabit Ethernet adapter. Ethernet signals up to 2.5 Gigabit are designed to work over Cat 5e cabling. Simply pair your USB Ethernet Adapter with 2.5Gbps-capable switches and routers to get upgraded networking without changing your cables.
Mini DisplayPort -> HDMI active cable - adapter AXAGON RVDM-HI14C2 to connect HDMI monitor/TV/projector to the computer with the Mini DisplayPort output. The smart hardware converter without the need for any installation or setup ensures high-quality transfer of image and sound with a resolution up to 4K/30Hz. Video and audio transfer from a computer or laptop will now be easy. Compact dimensions ensures easy use even in insufficient space. It is an ideal solution - you don't need a HDMI cable and converter. With this active cable everything is integrated into one compact unit. The cable is only one-way, i.e. Mini DisplayPort to HDMI, not otherwise. Input: Mini DisplayPort v1.2 Mini DP male connector (M) Output: HDMI v1.4b HDMI A (M) male connector Supported resolutions:Resolution and frequency depend on monitor and graphics adapter. max. 4096 x 2160 (19:10) @30Hz DCI 4K 3840 x 2160 (16:9) @30Hz UHD-1 4K (UHDTV) 3840 x 1600 (21:9) UW 4K (Ultrawide 1600p) 3840 x 1200 (32:10) 29:9 4K (Super ultrawide 1200p) 3840 x 1080 (32:9) 32:9 4K (Super ultrawide 1080p) 3440 x 1440 (21:9) UWQHD (Ultrawide 1440p) 2560 x 2048 (5:4) QSXGA 2560 x 1920 (4:3) 2560 x 1600 (16:10) WQXGA 2560 x 1440 (16:9) @60Hz WQHD 2560 x 1080 (21:9) UWFHD (Ultrawide 1080p) 2048 x 1536 (4:3) QXGA 2048 x 1152 (16:9) QWXGA 1920 x 1440 (4:3) 1920 x 1200 (16:10) WUXGA 1920 x 1080 (16:9) @60, 75, 100 a 120Hz Full HD/1080p 1856 x 1392 (4:3) 1792 x 1344 (4:3) 1680 x 1050 (16:10) WSXGA+ 1600 x 1200 (4:3) UXGA 1600 x 900 (16:9) HD+ 1536 x 864 (16:9) 1440 x 900 (16:10) WXGA+ 1400 x 1050 (4:3) SXGA+ 1366 x 768 (16:9) HD 1360 x 768 (16:9) HD 1280 x 1024 (5:4) SXGA 1280 x 960 (4:3) SXGA- 1280 x 800 (16:10) WXGA 1280 x 768 (5:3) WXGA 1280 x 720 (16:9) HD/WXGA/720p 1280 x 600 1152 x 864 (4:3) XGA+ 1024 x 768 (4:3) XGA 800 x 600 (4:3) SVGA Other features: sound transfer support DDC (Display Data Channel) support - Intelligent setting of resolution, frequency and other parameters according to the source graphics chip supported modes: mirroring the primary monitor area (default setting), expanding the primary monitor area HPD (Hot-Plug-Detect) support - communication sequence controlling the connection/disconnection of the device while running, HDCP 1.4 and 2.2 support of power saving modes with spinning down controlled by a source device (PC) and a viewing device (monitor/TV) power supply via bus - no external power is needed gold-plated connectors for perfect contact and oxidation limitation adapter dimensions 45 x 21 x 12 mm total cable length incl. connector 1.8 m weight only 62 g Supported operating systems: All versions of MS Windows, Mac OS X, Linux and other operating systems. It is a pure hardware converter, the transfer is provided only by the cable chip without computer participation, no drivers are installed, so the compatibility is not dependent on the operating system used. Package contains: Mini DisplayPort > HDMI cable length 1.8 m, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
The Neomounts by Newstar desk mount, model FPMA-D860DBLACK is a tilt-, swivel and rotatable desk mount for two flat screens up to 27?. This mount is a great choice for space saving placement on desks. Neomounts by Newstar's versatile tilt (20°), rotate (360°) and swivel (20°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is manually height adjustable from 24 to 47 centimetres. Depth 5 centimetres. Neomounts by Newstar FPMA-D860DBLACK has one pivot point and is suitable for screens up to 27" (69 cm). The weight capacity of this product is 7 kg each screen. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using Neomounts by Newstar VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area. All installation material is included with the product. - Screen size: 10 - 27" - Desk mount: Desk clamp & grommet - Depth: 5 cm - Height:24 - 47 cm - Tilt:20° - Rotation: 360° - Swivel: 20°
The Neomounts DS70S-950BL1 NEXT One is a full motion desk mount for screens up to 49". The DS70S-950BL1 is a true all-in one solution for small to large displays. The NEXT One features a strengthened head specifically designed to also support curved ultra-wide screens and features a higher maximum weight capacity up to 18 kg (curved 15 kg). The versatile tilt (180°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (20-52 cm) and depth adjustment (8,8-62,5 cm), to create the perfect working position. The DS70S-950BL1 features the nifty 180° stop mechanism, that prevents the mount from making contact with the wall or separation panel when installed near it. The smart cable management system ensures orderly routing of the cables. The black VESA plate of the NEXT One integrate stylishly with the black back of your screen. The DS70S-950BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. For non-standard hole patterns, Neomounts has various optional VESA adapter plates available. The monitor arm is equipped with a Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation.
DS70-250BL1 Neomounts desk monitor arm Neomounts DS70-250BL1 full motion monitor arm desk mount for 17-35" screens - Black The Neomounts DS70-250BL1 NEXT Slim is a full motion desk mount designed for screens up to 35", boasting a maximum weight capacity of 9 kg suitable for both flat and curved displays. The versatile tilt (90°), rotate (360°) and swivel (180°) technology enables seamless adjustment to any desired viewing angle to fully optimize the screen's capabilities. With the gas spring height adjustment (21,5-49,5 cm) and depth adjustment (7-52,5 cm) you can effortlessly adjust the mount to suit your ergonomic needs.
Maximise desk space and elevate your monitor to a comfortable viewing height to reduce eye, neck and shoulder strain. Holds large screens weighing up to 22.6kg. 3 different settings to achieve your perfect viewing height. Modern wide screen design, available in black or white. Tested by FIRA International Ltd to comply with the ergonomic requirements set out in European Health and Safety Legislation: EN ISO 9241-5.
Desk mounted adjustable mounting arm for 3 monitors (full-motion) Position your screen perfectly Lightweight and tilting design Adjustable monitor desk mount for 3 monitors Two arms rotate, extend and retract, tilt to change reading angles, and allow to rotate displays from landscape-to-portrait mode, etc Central mount allows height adjustment, swivel, tilt and rotation Enables easy ergonomic positioning for reduced strain Works with almost any LCD monitor (max. 27" ) Durable adjustable gas-springs suitable for monitors of 1 - 7 kg Strong desk clamp or grommet for easy and secure fixation on your desk Built-in cable management for an organized and neat workspace VESA compatible (100 x 100 mm and 75 x 75 mm)
The Neomounts FL40-450BL12 is a full-motion pole mount for flat screens up to 42" with a maximum weight capacity of 25kg. The versatile tilt (25°) and swivel (180°) technology allows you to create the optimum viewing angle. The mount can be leveled for the perfect installation. The FL40-450BL12 has a depth of 7.6-32.2cm and is suitable for screens that meet VESA hole pattern 75x75 to 200x200mm. The mount is equipped with a cable management system to secure and route any loose cables.
Connectivity. Charge. StartThis USB-C travel hub lets you equip your laptop with five additional essential ports. This ultra-portable, slim, and compact hub delivers scalable power and plug-and-play connectivity with almost any brand, device, and operating system. Maximize your productivity wherever your work takes you.Small Hub. Big ConnectivityExpand a single USB-C port on your laptop to five ports (USB-C x 2, USB-A x 2, and HDMI) that support multiple devices and one external display up to 4K resolution at 60Hz. Enjoy universal plug-and-play connectivity with almost any brand or device and blazing-fast data transfer speeds of 10Gbps.Scalable PowerThis lightweight and compact hub is not only portable but also technologically advanced. Take one hub on the go to enjoy high-bandwidth connectivity and scalable power from your 65W, 90W, or high-power USB-C power adapter on your laptop, or power the hub from your device's USB-C port.Maximum Compatibility, Minimum ClutterWherever you are in the world, this highly portable, compact hub works with everything you work with. It supports multiple operating systems: Windows, macOS, Chrome OS, iOS, and Android. Connect almost any of your devices and keep your productivity charged whenever and wherever you need it.Designed for Our Shared FutureBesides powering multiple devices, this USB-C travel hub also has the power to help protect our planet. Each hub contains over 80% recycled materials and comes in FSC-certified packaging.
USB 2.0 A-plug to Micro B-plug 6ft cable, bulk package USB 2.0 cable for modern electronic devices with compact Micro USB 5 pin male connector Gold-plated contacts suitable for USB 2.0 high-speed data transfer
Original part number CCP-USB2-AMBM-6G Gembird USB 2.0 A- B 1,8m cable grey color Class of product Cables - USB plugs 1x male USB A-type1x male USB B-type Cable length 1.8 m Other information Other information Gold plated plugs No Cable colour Grey Additional information 30u" gold-plated contacts suitable for USB 2.0 high-speed data transfer
Original part number PP6U-5M Product name Gembird patchcord RJ45, cat.6, UTP, 5m, gray Producer Gembird Class of product Patchcord network cable Wiring type UTP - unschielded twisted pair cable, 4 pairs Length 5 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type RJ45 Plug 2 type RJ45 Cross-Over No Boot non-snag-proof Colour Grey
Neomounts by Newstar CPU-D200. Tüüp: Lauale paigaldatav protsessori alus, Maksimaalne kaal (mahutavus): 30 kg, Toote värv: Must. Laius: 230 mm, Laiuse reguleerimise ulatus: 130 - 230 mm, Kõrgus: 540 mm. Kartongist põhipakendi ...
