SuperSpeed USB AXAGON ADSA-SN COMPACT HDD/SSD DOCK docking station easily and quickly connects any SATA disk to your computer. A handy helper for the easiest and fastest way of connecting SATA disks to your computer - just plug the disk into the base. Automatic installation can be done even by the layman. SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports sleeping of both the connected disks and station. Low laid centre of gravity of the docking station for good stability. Rubber feet to reduce vibrations. Modern minimalist design of housing with aluminium casing. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB rate of up to 5 Gbit/s. Connection via micro USB type B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" HDD/SSD, supports 3.5" HDD, max. disk capacity all without limitation, max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0, backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport). SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down after period of inactivity lasting 15 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. cable micro USB-B / USB-A 80 cm long is included. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Power switch. Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Station dimensions 130 x 65 x 59 mm. Weight 190 g. Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 HDD dock, micro USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with clearly indicated parameters.
CloneStation & DockingStation for M.2 NVME & SATA 2.5/3.5 SSD/HDD IB-2915MSCL-C31 MOUNTING MADE EASY: Experience a new mode in hard drive installation with our tool-free design, allowing for quick and easy installation of 2.5", 3.5" HDD, or M.2 SSD drives. Just plug your drive into the assigned slot and enjoy the smooth copying process. CLONING WITHOUT SOFTWARE: Backing up data has never been easier: With our software-free cloning technology, the process of creating a secure copy of your data has been simplified and streamlined. Offering a more efficient solution. CONNECTION WITH TOP SPEED: With the power of USB 3.2 Gen 2 and the inclusive USB Type-C and Type-A cable, experience data transfer that's not just swift, but impressively efficient, boasting speeds up to 10 Gbit/s. PRECISE CLONING: Benefit from precise duplication. Each bit is replicated from the source drive to the destination as a flawless copy of all data and configurations of the original drive. The process of duplicating data from a durable HDD to a fast SSD, or vice versa, couldn't be more comfortable. BIDIRECTIONAL CLONING: Clone from 2.5"/3.5" SATA HDD/SSD to M.2 PCIe NVMe SSD or do the reverse, all at the push of a button. Allowing for a straightforward data backup or system acceleration process, catering to your specific needs.
SuperSpeed USB-C 5Gbps docking / cloning station AXAGON ADSA-DC DUAL CLONE easily and quickly connects up to two 2.5" or 3.5" drives to the computer at the same time. The connection to the computer is enabled by the modern double-sided USB-C connector on the dock together with the supplied USB-C USB-A cable with a length of 80 cm. This handy helper will allow you easiest connection of any 2.5/3.5" SATA drive to computer or notebook. Just insert one or even two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux...). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5Gbit/s. Connection via USB-C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, Supports 2.5" HDD/ SSD Supports 3.5" HDD. Max. disk capacity all without limitation. Max. 2.5" disk height - all without limitation. Features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2) and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transmission in Windows 8 and later. TRIM support to reduce the gradual degradation of SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. HDD/SSD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spin down - shutdown of disks when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB-C female connector. USB-C USB-A cable 80 cm long is included. LED indicating HDD/SSD dock power and disk activity in both shafts. Station dimensions 73 x 130 x 97 mm. Weight 307 g. Power: Power supply using the included external AC/DC adapter 12V - 3A with 150 cm long cable. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDDs and SSDs can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported OS: Windows, macOS, Linux, Chrome OS. Package contains: HDD/SSD dock, USB-C USB-A cable 80 cm long, power adapter 100-240V / 12V-2.5A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
The AXAGON PCES-SA6 PCI-Express controller extends your desktop PC with six high-speed SATA III ports with a transmission rate up to 6Gb/s. The card equipped with ASMedia chipset not only supports SATA 3.0 specification, but also other SATA technologies such as Hot-Plug, Native Command Queue (NCQ), TRIM, or Port Multiplier. Easy installation without the need to install drivers on most operating systems. Included low profile bracket allow controller installation into standard and also low profile PC cases. Input: PCI-Express 3.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.0 / 2.1. Number of 2-Lane (x2) lines, compatible with x4 / x8 / x16 PCIe slots. The bandwidth of 2-Lane PCI-Express 3.0 bus 2 GB/s. Output: 6x independent Serial ATA port, SATA III 6G standard. 6x internal 7-pin SATA data connector. Supports all SATA I / SATA II / SATA III optical drives, SSDs and hard disks of all capacities. Other features: Full Plug and Play support. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with the ATA AHCI (Advanced Host Controller Interface) specification revision 1.4. Fully supports Hot Plug connecting and disconnecting of SATA devices while running. Supports Native Command Queuing (NCQ). TRIM feature support for SSD disks. Supports Port Multiplier Command Based Switching. The ASMedia ASM1166 chipset is used. Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.x and later. Package contains: PCI-Express SATA controller, low profile brackets, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
The AXAGON PCES-SA4X4 PCI-Express controller extends your desktop PC with four SATA III ports with a transmission rate up to 6Gb/s. The card equipped with ASMedia chipset not only supports SATA 3.0 specification, but also other SATA technologies such as Hot-Plug, Native Command Queue (NCQ), TRIM, or Port Multiplier. Easy installation without the need to install drivers on most operating systems. Included low profile bracket allow controller installation into standard and also low-profile PC cases. Input: PCI-Express 3.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.0 /2.1. Number of 2-Lane (x2) lines, compatible with x4 / x8 / x16 PCIe slots. The bandwidth of 2-Lane PCI-Express 3.0 bus 4 GB/s bidirectional. Output: 4x independent Serial ATA port, SATA III 6G standard. 4x internal 7-pin SATA data connector. Supports all SATA I / SATA II / SATA III optical drives, SSDs and hard disks of all capacities. Other features: Full Plug and Play support. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with the ATA AHCI (Advanced Host Controller Interface) specification revision 1.4. Fully supports Hot Plug connecting and disconnecting of SATA devices while running. Supports Native Command Queuing (NCQ). TRIM feature support for SSD disks. Port Multiplier Command Based Switching feature support. Boot support from connected disk incl. cooperation with computer motherboard BIOS / UEFI. 4x LED to indicate connected disks activity. Four 2-pin sockets for connecting the HDD LEDs of the computer case. The ASMedia ASM1164 chipset is used. Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.x and above. Package contains: PCI-Express controller with standard bracket, low profile bracket, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
The Neomounts DS60-600BL1 NERO monitor arm is the perfect choice for those looking for a sturdy and versatile solution for monitors up to 32" with a weight capacity of 8 kg. This full motion monitor arm offers maximum flexibility thanks to its versatile tilt (90°), rotate (360°) and swivel (180°) technology, enabling you to always find the optimal viewing angle for an ergonomic working posture. The NERO monitor arm features manual height and depth adjustment, allowing you to adjust your workspace completely to your liking. In addition, the clever 180° stop mechanism prevents the mount from making contact with the wall or separation panel when installed near it. The welded base guarantees optimal stability and sturdiness. The practical cable management system ensures neat routing of cables. In addition, the base of the DS60-600BL1 provides a convenient space to place a phone, for a tidy desk. The DS60-600BL1 is suitable for screens that meet pattern 75x75 or 100x100 mm. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available. Installation of the NERO is quick and easy. The Easy-release system makes it easy to attach or detach the screen. Additionally, fixing the clamp to the desk only takes a few actions and, in addition to manual installation, can also be installed using an Allen key or drill for even faster installation. The NERO monitor arm's quick-span lever also allows for easy adjustment of the arm's height without additional tools. With sustainability in mind, the packaging of the NERO monitor arms is 100% plastic-free and made entirely of recyclable cardboard and paper.
2-Bays 2.5"/3.5" SSD/HDD Clone Station with card reader and USB-ACompatible with both 2.5"/3.5" HDDs and SSDs Supports standalone cloning without a computer Integrated card reader for CF and SD memory cards High-speed data transfer via USB connection Includes a power adapter for reliable operation.
The AXAGON ADSA-FPX FAST PORT X universal adapter with USB-C 10Gbps and SATA 6G interface is designed to easily connect a 2.5" / 3.5" SATA hard drive or SSD to your computer. Thanks to the fast USB 3.2 Gen 2 interface with the transmission rate of up to 10 Gb/s, the speed of 2.5" SSDs is not limited and is approximately 20% faster than USB 3.2 Gen 1 (USB 3.0) adapters or boxes. In the package you will find a USB-C USB-C cable 60 cm with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Also included is a 12V/2A (24W) power adapter for powering 3.5" hard drives. The adapter with a 2.5" SSD/HDD just needs to be powered over the USB bus, so there is no need to manipulate the AC adapter. The USB to SATA reduction also supports all important features for seamless operation with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the reduction, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 480Mbps, USB 5Gbps, USB 20Gbps, USB4 and Thunderbolt 3/4. Device support: 2.5" SSDs/HDDs, 3.5" HDDs, SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD), SATA III - 6 Gb/s (600 MB/s) interface, max. disk capacity - all without limit. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the SATA interface used (theor. 6 Gbit/s). Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transfer in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Connection via USB 3.2 Gen 2 type C female connector. Cable USB type C male / USB type C male 60 cm long and reduction USB type C female / USB type A male included in the package. Adapter dimensions 14 x 72 x 29 mm (H x W x D). Adapter weight 19 g (without cable, without disk, without adapter). Power supply: Power supply via USB bus up to 900mA from one USB port is sufficient for 2.5" HDD/SSD. To power the adapter with a 3.5" drive, a compact external AC/DC adapter 12V - 2A (24W) with a 150 cm long cable is included. AC adapter dimensions 65 x 65 x 40 mm (including fork). Weight of AC adapter 102 g (incl. power cord). Package contains: USB-C 10 Gbps - SATA adapter, cable USB-C USB-C 60 cm + USB-C -> USB-A reduction, AC adapter 100-240V / 12V-2A
Travel USB-A 5Gbps hub AXAGON HUE-C1A fast and easy connects up to four USB devices to laptop or computer at the same time. Fixed 19 cm long USB-A cable is ideal for mobile devices users. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The versatility of this compact USB hub is also enhanced by the built-in USB-C connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply you can connect even more external drives to your computer or increase the number of charged mobile phones. Even without an external power supply, the hub can handle the permanent connection of several external drives. The hub also enables charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0) and USB 1.1. Connecting USB type A male connector on a fixed 19 cm long cable. Outputs: 4x USB 5Gbps, USB-A female connector. Supported transmission rates 5.000 / 480 / 12 / 1.5 Mbps. The total bandwidth / transfer rate of the box is given by the used USB 5Gbps interface (theor. up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Decently bright LED indicates the connection of the hub to the computer. Dimensions 106 x 32 x 11 mm. Weight 37 g (incl. cable). USB cable length 19 cm. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 2 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1A in each of the hub ports. The hub power mode via USB + external USB charger (self power): Integrated USB-C connector in the body of the hub for additional power supply of the hub. Any mobile device wall charger (not included) with USB-C connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and later, Android most versions. Package contains: USB-A hub with fixed 19 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
The DIGITUS USB-A to USB-C power cable delivers performance with a length of 95 cm, ensuring a flexible connection for various devices. Designed for reliability, this cable operates effectively across a range of temperatures from 0°C to 70°C, making it suitable for diverse environments. This kit includes both a transmitter and receiver, providing convenience for seamless data transfer and connectivity. Engineered to support high-definition video and audio, this product offers features like 4K UHD video streaming, 36-bit Deep Color support, and HDR support. With support for HDMI and USB-C data link protocols and compliance with standards like CAT 6 and HDCP 2.3, this product ensures quality and robust performance for all multimedia needs.
The DIGITUS USB extension cable DA-73113 is designed to enhance your connectivity experience. This reliable cable boasts USB 3.2 compliance, ensuring high-speed data transfer. With its double shielded technology, you can expect reduced interference for better performance. Featuring a 24-pin USB-C male connector on one end and a 9-pin USB Type-A female connector on the other, this cable allows for seamless connections between devices, making it ideal for various setups, whether at home or in the office.
The AXAGON ADR-207 active USB 2.0 extension cable with a length of 7.5 meters is ideal for connecting your computer to USB devices such as a mouse, keyboard, webcam, printer, scanner, plotter, and others. The active USB repeater cable amplifies the transmitted signal and allows you to connect a USB device at a significantly greater distance than a passive cable would allow. The cable's range can be further extended by connecting several cables in sequence. A great advantage of the ADR-207 cable is the integrated connector for additional power supply. In most cases, power via the USB bus is sufficient, but for devices with higher power consumption, USB power may be insufficient over longer distances, and an external power supply from the mains can solve this problem. The exceptionally compact body of the repeater cable allows trouble-free use in electrical installation ducts or cable systems. The use of a high-quality shielded cable ensures high communication speed and minimal unwanted interference. Input: USB 2.0 for connection to a computer USB Type A (M) male connector Output: USB 2.0 for connecting a remote USB device USB Type A (F) female connector transmission rate 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a connector ( 3.5 x 1.3 mm outer x internal diameter) for additional external power supply of 5V/ 1-2 A. The power cable USB A-M / 3.5 mm jack, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-QC18. When powering the repeater cable with the power adapter, an external 2.5" disk can be connected without the need for own power supply to the disk. For longer USB route with multiple repeater cables connected in a row, the USB bus supply may be inadequate for USB devices with lower power consumption than an external 2.5" drive. Also, in this case it can help to boost the power supply by connecting a power adapter. Other features: Fully compatible with USB 2.0 and backward compatible with USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB connection. Behind the active USB cable, a common passive USB cable can also be used. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, macOS, Linux, Chrome OS and Android. Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 / 2025 and later (all 32- and 64-bit Windows versions supported). Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 2.0 A-M > A-F active repeater 7.5 m long, USB-A / 3.5 mm power cable, printed installation manual in CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.
Der 90 Watt Netzadapter DELL-14P3N ist speziell auf die Erfüllung der Stromanforderungen eines Dell Notebook ausgelegt. Über den leistungsstarken 90 Watt Netzadapter kann das System zum Betrieb und zum gleichzeitigen Aufladen des Akkus an die Stromversorgung angeschlossen werden. Im Lieferumfang ist ein 1 Meter langes Netzkabel enthalten. Jetzt muss das Netzteil nicht mehr zwischen Büro und Zuhause hin- und her getragen werden. Mit einem zweiten Netzadapter für das Notebook ausgestattet, hat man einen fürs Büro und einen für Zuhause oder unterwegs. Der 90 Watt Netzadapter DELL-14P3N ist mit einem Gummiriemen zum einfachen Kabelmanagement und einem LED-Leuchtring auf dem Gleichstromanschluss ausgestattet. Originalteile von Dell werden strengen Tests durch qualifizierte Techniker unterzogen, um Kompatibilität und Zuverlässigkeit sicherzustellen.
Pixel A4 Laminator Stylish laminator for a variety of laminating applications in the home or small office Fast heat-up time. Ready to go in 3-minutes 80 & 125 micron laminating capability for added versatility Release trigger for retrieving and re-aligning misfed documents Auto-shut off after 30 minutes inactivity Includes a starter kit for 10 documents
Fully Mobile Dual Monitor Desk Mount for screens up to 45" and a maximum weight of 2×20kg - suitable for both flat and curved monitors. This robust desk mount is specially designed for large monitors up to 45 inches, supporting up to 20kg per arm, making it ideal for demanding work environments and high-quality setups. Whether for flat or curved screens, the mount provides maximum stability and flexible, space-saving positioning. Its sturdy, durable construction easily supports heavy monitors while allowing precise adjustment in all directions. The integrated spring tension mechanism ensures smooth weight adjustment, so each monitor can be positioned effortlessly without repeated calibration. The VESA quick-release feature allows fast and easy mounting or removal of monitors. An innovative quick connector simplifies joining the two arm segments, significantly reducing assembly effort. With two flexible mounting options - desk clamp or grommet - the mount can attach to almost any workstation. The built-in 180° rotation limiter prevents accidental collisions with walls or neighboring screens, and smart cable management keeps the setup neat and professional. Perfect for users who value ergonomics, stability, and functionality - in the office, studio, or home. Compatible Screens: Supports flat and curved monitors up to 45" Durable Construction: Maximum load capacity of 20kg per arm Space-Saving: Integrated cable management VESA Quick-Release: Fast and easy monitor attachment/detachment Quick Connector: Joins two arm segments for easy installation Two Mounting Options: Desk clamp or grommet mount Integrated Spring Tension Mechanism: Ensures precise weight adjustment 180° Rotation Limiter: Prevents monitor arms from hitting walls or other screens Tested and Certified by IGR (Institute for Health and Ergonomics)
Der Voyager XP 1470g von Honeywell ist eine solide Lösung für Arbeitsplätze, an denen zuverlässiger 1D- und 2D-Barcode-Scan benötigt wird. Er scannt auch schlecht gedruckte oder beschädigte Barcodes und unterstützt das Scannen von Smartphone-Displays. Damit ist er ein zuverlässiges Arbeitsgerät an Arbeitsplätzen mit hohem Scanaufkommen wie im Einzelhandel oder bei der Zugangskontrolle. Sein Gehäuse ist nach IP52 geschützt und übersteht auch Stürze aus einer Höhe von bis zu 1,8 Metern. Dabei fällt sein Gewicht mit 130 Gramm gering aus, was die Handhabung zusätzlich erleichtert.
FEATURES High-Definition Multimedia Interface (HDMI) digital audio/video interface cable Supports data transfer bandwidth of up to 10 Gigabits/sec Allows bi-directional communication between smart HDMI devices Supports 3D TV with video resolutions up to 3840 x 2160 pixels at 24/25/30 Hz and 4096 x 2160 at 24 Hz Supports HDMI Ethernet Channel 100 Mbps function (HEC) Supports Audio Return Channel technology (HARC)
The NewStar desk mount FPMA-D700D3 allows you to attach 3 LCD/TFT screens up to 27" on a desk. With this mount you can easily swivel, tilt and rotate the monitor. The desk mount can hold screens up to 8 kg each and is mounted on a desk using a deskclamp. This model is suited for all LCD/TFT screens with a VESA 75x75 or 100x100 mm hole pattern. If the hole pattern on the back of your screen is different, please contact us for the opportunities. By using an ergonomic monitorarm you prevent neck- and back complaints. Ideal for use in offices and on counters or receptions.
Gembird HDMI to Micro-HDMI adapter Features HDMI (A female) to micro-HDMI (D male) adapter; Gold plated contacts. Type HDMI to Micro-HDMI adapter Dimensions 35 x 20 x 11 mm Weight 7 g
Original part number CC-HDMI4-15 Product name Gembird HDMI V1.4 male-male cable with gold-plated connectors 4.5m, bulk package Producer Gembird Class of product Cables - HDMI | DP | Component | DVI | VGA Basic information Basic information Cable type audio-video HDMI plugs 2x male HDMI A-type (19-pin, Single Link) Cable length 4.5 m Other information Other information Gold plated plugs Yes Cable colour Black Additional information HDMI V1.4
Product kirjeldus: D-Link DUB H4 - hub - 4 ports seadme tüüp: Hub - 4 ports Subtype: USB Ports: 4 x USB 2.0 mõõtmed (WxDxH): 6.3 cm x 6.3 cm x 1.4 cm kaal: 85 g Localisation: Europe Manufacturer Warranty: 2-year garantii
Premium quality ImageLast laminating pouches for superior laminating results every time, Unique arrow directional quality mark disappears when laminated, Ideal for notices, photos, instructions and frequently handled documents, ...
Original part number CCP-MUSB2-AMBM-10 Gembird micro USB cable 2.0 AM-MBM5P black 3m Class of product Cables - USB plugs 1x male USB A-type1x male micro-USB Cable length 3 m Other information Other information Gold plated plugs Yes Cable colour Black
3M PF23.0W9 Black Privacy Filter for desktops with 58.4 cm (23") display sizeThe Privacy Filters PF23.0W9 are designed to fit 16:9 aspect ratio widescreen desktop monitors with a viewable screen size of 23.0". Using 3M microlouver technology the filter gives full 60° privacy protection on either side, protecting sensitive information from unauthorised viewing. With a simple attachment system the filter can be easily removed for screen sharing.3M microlouver privacy technology provides privacy screen protection for sensitive data.Reversible glossy or matte screen finish. Matte screen finish reduces discomfort from screen glare.Two easy on, easy off attachment systems. Filter stays in place when notebook is closed.Suggested applications:Desktop monitor user working in sensitive areas. Open plan offices, open reception areasProtecting confidential/sensitive information - customer, commercial, medical, government, e-examination Type Privacy Filter Compatible with Universal Screen Diagonal (cm) 58,4 Screen Diagonal (inch) 23 Aspect Ratio 16:9 Quantity 1 Colour Black
3M PF24.0W9 Black Privacy Filter for desktops with 61 cm (24") display sizeThe Privacy Filters PF24.0W9 are designed to fit 16:9 aspect ratio widescreen desktop monitors with a viewable screen size of 24.0". Using 3M microlouver technology the filter gives full 60° privacy protection on either side, protecting sensitive information from unauthorised viewing. With a simple attachment system the filter can be easily removed for screen sharing.3M microlouver privacy technology provides privacy screen protection for sensitive data.Reversible glossy or matte screen finish. Matte screen finish reduces discomfort from screen glare.Two easy on, easy off attachment systems. Filter stays in place when notebook is closed.Suggested applications:Desktop monitor user working in sensitive areas. Open plan offices, open reception areasProtecting confidential/sensitive information - customer, commercial, medical, government, e-examination Type Privacy Filter Compatible with Universal Screen Diagonal (cm) 61 Screen Diagonal (inch) 24 Aspect Ratio 16:9 Quantity 1 Colour Black
Original part number CS692-AT Product name ATEN CS692 2-Port USB HDMI KVM Switch, Audio 2.1, Remote port selector (1.8m) Producer Aten Class of product KVM switches Number of PC ports 2 Supported keyboard/mouse/display ports USB, USB, HDMI Local console's ports 1 x (USB, USB, HDMI) Number of remote users (IP) 0 Type of computer case compact size Maximal resolution 1920 x 1200 pixels Possibility of joining into cascade No Switching audio signal (microphone/speakers) Yes
Original part number IUH3F56 Product name HUB I-BOX USB 3.0 Black 4-PORTS SLIM Producer IBOX Class of product USB hub Number of ports 4 Supported USB standards USB 3.0 Maximal external transmission speed 5 Gb/s Additional information Plug and play, hot swap Width 42 mm Height 12 mm Depth 77 mm More info
Original part number CC-PSU-6 Product name Gembird Internal power adapter cable for PCI express Producer Gembird Class of product Cables - others Wire type Adaptor Plug 1 type 2 x Molex 4-pin (male) Plug 2 type PCI-E 6-pin (male) Length 15 cm
Tootja: TRACER Tootegrupp: pikendusjuhtme kaitsed väljundi ühenduse tüüp: EURO Väljundeid: 4 tk toitejuhtme pikkus: 3 m sisseehitatud filter RJ-11 telefoniliinile: Ei sisseehitatud filter RJ-45 andmeside liinile: Ei sisseehitatud filter AV signaalile: Ei häirevastane filter (EMI/RFI): Ei seina kinniti: Ei laius: 90 mm pikkus: 290 mm kõrgus: 50 mm Netokaal: 400 g
Screen size (max): 27 Load (max): 16 Vertical adjustment: 45 Horizontal adjustment: 45 Dimensions: 480 x 130 x 150 mm Weight: 4.1 Other features: - Pivot: 360°- Integrated cable management system- Maximum weight on the frame: 8 kg
Tootja: Lanberg Tootegrupp: kaablid - USB | FireWire | PS/2 | (e)SATA | ATA USB plugs: 1x male USB 2.0 Type-B, 1x male USB 2.0 Type-A kaabli pikkus: 1.8 m kullatud pistikud: Ei kaabli värvus: must
Tootja: Natec Tootegrupp: USB | FW | eSATA | LAN | WLAN case / stadion Case / docking station liides: USB 3.0 seadme suurus: 2.5 tolli seadme liidesed: SATA III toetatud seadmed: Hard disk, SSD toiteplokk: USB laius: 78 mm kõrgus: 12.3 mm sügavus: 130 mm
