The slim USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-F7A with a 1 m long USB cable easily and quickly connects up to seven USB devices to the computer at the same time. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5Gb/s. The metal hub body is made of aluminum and provides perfect mechanical protection. Elegant finely structured body surface against fingerprint. Permanently fixed 1 m long USB-A cable is suitable for use with a desktop computer. The advantage is a separate USB-A port on the front, which is used to connect larger flash disks, readers and other USB devices. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. It can handle the permanent connection of several external drives even without an external power supply to the hub. After connecting the external power supply, it is possible to work with five external disks at the same time. Thanks to the Charging hub function, mobile devices can be charged even without connecting to a computer. An unused charger turns this USB hub into a charging hub for free. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 1 m long cable. Outputs: 7x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Blue LED indicates the connection to the computer's USB port. Dimensions 145 x 42 x 15 mm. Weight 110 g (incl. cable). USB cable length 1 m. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 3 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port). The hub power mode via USB + external USB charger (self power): Integrated micro USB connector for additional powering the hub. Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with up to 5 magnetic 2.5" external disks. However, for reliable long-term operation of the hub, we recommend connecting a maximum of 3 magnetic external 2.5" drives at the same time. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 5A at 5V (depending on the capabilities of the external wall charger). Independent charging hub mode without connecting to a computer (charging hub): After turning off the connected computer or without connecting to the computer, the hub works with power via a USB charger as a separate charging USB hub, just plug a standard charger with a micro USB connector into the hub (micro USB input). Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports, the total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the external power adapter). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 1 m long USB cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Travel USB-A 5Gbps hub AXAGON HUE-C1A fast and easy connects up to four USB devices to laptop or computer at the same time. Fixed 19 cm long USB-A cable is ideal for mobile devices users. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The versatility of this compact USB hub is also enhanced by the built-in USB-C connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply you can connect even more external drives to your computer or increase the number of charged mobile phones. Even without an external power supply, the hub can handle the permanent connection of several external drives. The hub also enables charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0) and USB 1.1. Connecting USB type A male connector on a fixed 19 cm long cable. Outputs: 4x USB 5Gbps, USB-A female connector. Supported transmission rates 5.000 / 480 / 12 / 1.5 Mbps. The total bandwidth / transfer rate of the box is given by the used USB 5Gbps interface (theor. up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Decently bright LED indicates the connection of the hub to the computer. Dimensions 106 x 32 x 11 mm. Weight 37 g (incl. cable). USB cable length 19 cm. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 2 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1A in each of the hub ports. The hub power mode via USB + external USB charger (self power): Integrated USB-C connector in the body of the hub for additional power supply of the hub. Any mobile device wall charger (not included) with USB-C connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and later, Android most versions. Package contains: USB-A hub with fixed 19 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
The Club 3D CAC-1570 USB-C cable offers performance with capabilities suitable for a variety of devices. With support for USB4 standards, this cable ensures fast data transfer rates of up to 80 Gbps, making it suitable for high-resolution content. It features a reversible design that simplifies connections, while the e-marker chip enables enhanced power delivery of up to 240W, allowing devices to charge efficiently.Constructed from durable thermoplastic elastomer (TPE), this cable is designed for longevity with a lifespan of 10,000 insertions. It includes strain relief to reduce wear. The cable is halogen free and complies with FCC, RoHS, USB-IF, and EMI standards, reflecting a commitment to safety and environmental standards.
DisplayPort -> HDMI active cable reduction AXAGON RVD-HI20C2 for connecting an HDMI monitor/TV/projector to a computer with a DisplayPort output. A hardware converter with no installation required provides high-quality video output up to 4K/60 Hz Ultra HD. Popular resolutions such as 2K/144 Hz Quad HD or 1080p/240 Hz Full HD are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colours and contrasts without restrictions. The Plug and Play technology, makes it ideal not only for professionals but also for home users who want to easily and efficiently expand their multimedia setup. Enjoy a home cinema experience with stunning 4K visuals, or use the adapter for conferences and presentations. Its perfect for schools and interactive spaces where computers are frequently connected to HDMI devices. Graphic designers and video creators will appreciate the detailed display. The adapter is compatible with monitors from brands such as Dell, HP, Lenovo, ASUS, Samsung, LG, Sony, MSI, and others, ensuring its versatility and reliability. Thanks to HDCP 2.3 support, you can enjoy your favourite streaming services in 4K resolution without restrictions, including Netflix, Disney+, HBO Max, Amazon Prime, and Apple TV+. It also supports lossless audio transmission, best enjoyed on modern TVs. HDCP support must be enabled on all connected devices as well as by the streaming service itself. The video cable is made of high-quality materials, ensuring excellent reliability. The DP connector features safety latches that prevent accidental disconnection. The cable and connectors are protected against bending and breakage. With its 1.8 m length, the adapter ensures a reliable connection even to more distant monitors or projectors. The cable is unidirectional, i.e., it functions as a DisplayPort to HDMI converter, not the other way around. Input (connection to computer): DisplayPort v1.4 DP connector with latch (M) male Connector latch control button Output (connection to monitor / TV / projector): HDMI v2.0b HDMI A (M) male connector The most widely supported resolutions: 4K/60, 30 Hz Ultra HD 2K/144, 120, 100, 60 Hz Quad HD 1080p/240, 144, 120, 100, 75, 60 Hz FullHD Other supported resolutions:The resolution and refresh rate depend on the monitor and graphics card used. max. 4096 x 2160 (17:9) @60Hz DCI 4K 3840 x 2160 (16:9) @60Hz UHD-1 4K (UHDTV) 3840 x 1600 (21:9) UW 4K (Ultrawide 1600p) 3840 x 1200 (32:10) 4K (Super ultrawide 1200p) 3840 x 1080 (32:9) 4K (Super ultrawide 1080p) 3440 x 1440 (21:9) UWQHD (Ultrawide 1440p) 2560 x 2048 (5:4) QSXGA 2560 x 1920 (4:3) 2560 x 1600 (16:10) WQXGA 2560 x 1440 (16:9) @144Hz QHD 2560 x 1080 (21:9) UWFHD (Ultrawide 1080p) 2048 x 1536 (4:3) QXGA 2048 x 1152 (16:9) QWXGA 1920 x 1440 (4:3) 1920 x 1200 (16:10) WUXGA 1920 x 1080 (16:9) @240Hz FullHD/1080p 1856 x 1392 (4:3) 1792 x 1344 (4:3) 1680 x 1050 (16:10) WSXGA+ 1600 x 1200 (4:3) UXGA 1600 x 900 (16:9) HD+ 1536 x 864 (16:9) 1440 x 900 (16:10) WXGA+ 1400 x 1050 (4:3) SXGA+ 1366 x 768 (16:9) HD 1360 x 768 (16:9) HD 1280 x 1024 (5:4) SXGA 1280 x 960 (4:3) SXGA- 1280 x 800 (16:10) WXGA 1280 x 768 (5:3) WXGA 1280 x 720 (16:9) HD/WXGA/720p 1280 x 600 1152 x 864 (4:3) XGA+ 1024 x 768 (4:3) XGA 800 x 600 (4:3) SVGA Other features: Supports lossless transmission of up to 8-channel audio 192kHz at 24-bit. Supports DDC (Display Data Channel) intelligent adjustment of resolution, frequency, and other parameters based on the source graphics chip. Supported modes: mirroring the desktop (default setting), extension of the primary monitor area. HDR support (High Dynamic Range, 10 bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support - communication sequence controlling the connection/disconnection of the device while running, HDCP 2.3 (8K, 4K, QHD, FullHD) support- backwards compatible with HDCP 2.2 and 1.4. Support of power saving modes with spinning down controlled by a source device (PC) and a viewing device (monitor/TV). Power supply via bus - no external power is needed. Dimensions 9 x 38 x 21 mm (H x B x D). Weight 71 g (incl. cable). Cable length 1.8 m. Supported operating systems: All versions of Windows, macOS, Linux, Chrome OS and other operating systems. It is a pure hardware converter, the transfer is provided only by the cable chip without computer participation, no drivers are installed, so the compatibility is not dependent on the operating system used. Package contains: DisplayPort > HDM video adapter with cable length 1.8 m, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box with a hanging hole.
Original part number PC-186A-VDE Product name Gembird power cord 90 degree angled output plug 6ft Producer Gembird Class of product Cables - others Wire type Power cable 10A/230V Plug 1 type EURO Plug (10A) Plug 2 type IEC320 C13 Colour Black Length 1.8 m Additional information Plug at 90 degreesWires: profile area 0.75 sq.mm
Original part number PP6U-5M Product name Gembird patchcord RJ45, cat.6, UTP, 5m, gray Producer Gembird Class of product Patchcord network cable Wiring type UTP - unschielded twisted pair cable, 4 pairs Length 5 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type RJ45 Plug 2 type RJ45 Cross-Over No Boot non-snag-proof Colour Grey
IB-HUB1720-U3 20-in-1 USB HUB with power supply, on/off button and mounting brackets Extensive Connectivity: Features 18 USB 3.2 Type-A ports for data transfer with speeds up to 5 Gbit/s. Dedicated Charging Ports: Includes two USB Type-A ports with 15-watt output for efficient device charging. Convenient Control: Equipped with a tact switch for easy On/Off functionality. High-Speed Interface: Comes with a USB Gen 1 Type-B port supporting transfer speeds of up to 5 Gbit/s. Accessories: Includes a USB Type-B to Type-A cable (80 cm) and an AC power cord (120 cm). Reliable Power Supply: Bundled with a durable power adapter for stable operation.
The AXAGON ADR-207 active USB 2.0 extension cable with a length of 7.5 meters is ideal for connecting your computer to USB devices such as a mouse, keyboard, webcam, printer, scanner, plotter, and others. The active USB repeater cable amplifies the transmitted signal and allows you to connect a USB device at a significantly greater distance than a passive cable would allow. The cable's range can be further extended by connecting several cables in sequence. A great advantage of the ADR-207 cable is the integrated connector for additional power supply. In most cases, power via the USB bus is sufficient, but for devices with higher power consumption, USB power may be insufficient over longer distances, and an external power supply from the mains can solve this problem. The exceptionally compact body of the repeater cable allows trouble-free use in electrical installation ducts or cable systems. The use of a high-quality shielded cable ensures high communication speed and minimal unwanted interference. Input: USB 2.0 for connection to a computer USB Type A (M) male connector Output: USB 2.0 for connecting a remote USB device USB Type A (F) female connector transmission rate 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a connector ( 3.5 x 1.3 mm outer x internal diameter) for additional external power supply of 5V/ 1-2 A. The power cable USB A-M / 3.5 mm jack, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-QC18. When powering the repeater cable with the power adapter, an external 2.5" disk can be connected without the need for own power supply to the disk. For longer USB route with multiple repeater cables connected in a row, the USB bus supply may be inadequate for USB devices with lower power consumption than an external 2.5" drive. Also, in this case it can help to boost the power supply by connecting a power adapter. Other features: Fully compatible with USB 2.0 and backward compatible with USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB connection. Behind the active USB cable, a common passive USB cable can also be used. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, macOS, Linux, Chrome OS and Android. Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 / 2025 and later (all 32- and 64-bit Windows versions supported). Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 2.0 A-M > A-F active repeater 7.5 m long, USB-A / 3.5 mm power cable, printed installation manual in CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.
Fully Mobile Dual Monitor Desk Mount for screens up to 45" and a maximum weight of 2×20kg - suitable for both flat and curved monitors. This robust desk mount is specially designed for large monitors up to 45 inches, supporting up to 20kg per arm, making it ideal for demanding work environments and high-quality setups. Whether for flat or curved screens, the mount provides maximum stability and flexible, space-saving positioning. Its sturdy, durable construction easily supports heavy monitors while allowing precise adjustment in all directions. The integrated spring tension mechanism ensures smooth weight adjustment, so each monitor can be positioned effortlessly without repeated calibration. The VESA quick-release feature allows fast and easy mounting or removal of monitors. An innovative quick connector simplifies joining the two arm segments, significantly reducing assembly effort. With two flexible mounting options - desk clamp or grommet - the mount can attach to almost any workstation. The built-in 180° rotation limiter prevents accidental collisions with walls or neighboring screens, and smart cable management keeps the setup neat and professional. Perfect for users who value ergonomics, stability, and functionality - in the office, studio, or home. Compatible Screens: Supports flat and curved monitors up to 45" Durable Construction: Maximum load capacity of 20kg per arm Space-Saving: Integrated cable management VESA Quick-Release: Fast and easy monitor attachment/detachment Quick Connector: Joins two arm segments for easy installation Two Mounting Options: Desk clamp or grommet mount Integrated Spring Tension Mechanism: Ensures precise weight adjustment 180° Rotation Limiter: Prevents monitor arms from hitting walls or other screens Tested and Certified by IGR (Institute for Health and Ergonomics)
Der Voyager XP 1470g von Honeywell ist eine solide Lösung für Arbeitsplätze, an denen zuverlässiger 1D- und 2D-Barcode-Scan benötigt wird. Er scannt auch schlecht gedruckte oder beschädigte Barcodes und unterstützt das Scannen von Smartphone-Displays. Damit ist er ein zuverlässiges Arbeitsgerät an Arbeitsplätzen mit hohem Scanaufkommen wie im Einzelhandel oder bei der Zugangskontrolle. Sein Gehäuse ist nach IP52 geschützt und übersteht auch Stürze aus einer Höhe von bis zu 1,8 Metern. Dabei fällt sein Gewicht mit 130 Gramm gering aus, was die Handhabung zusätzlich erleichtert.
FEATURES High-Definition Multimedia Interface (HDMI) digital audio/video interface cable Supports data transfer bandwidth of up to 10 Gigabits/sec Allows bi-directional communication between smart HDMI devices Supports 3D TV with video resolutions up to 3840 x 2160 pixels at 24/25/30 Hz and 4096 x 2160 at 24 Hz Supports HDMI Ethernet Channel 100 Mbps function (HEC) Supports Audio Return Channel technology (HARC) One HDMI connector is bent 90 degrees Gold plated pins and connectors
USB 2.0 A-plug to Micro B-plug 6ft cable, bulk package USB 2.0 cable for modern electronic devices with compact Micro USB 5 pin male connector Gold-plated contacts suitable for USB 2.0 high-speed data transfer
Original part number CCP-USB3-AMAF-10 Gembird USB 3.0 extension A-plug A-socket cable 10ft Class of product Cables - USB plugs 1x male USB A-type1x female USB A-type Cable length 3 m Other information Other information Gold plated plugs No Cable colour Blue Additional information Standard USB 3.0
Length 0.15 m|Connectors SATA power supply Product Type Cables Length 0,15 m Connectors SATA power supply Shipping box quantity 1 Unit Brutto Volume 0,00012 cubm Unit Net Weight 0,01 kg Unit Gross Weight 0,1 kg
Length 3 m Product Type Cables Length 3 m Shipping box quantity 80 Unit Brutto Volume 0,0005074 cubm Unit Net Weight 0,11 kg Unit Gross Weight 0,133 kg
