Varia lisaseadmed

Adjustable desk holder with monitor arm and notebook stand. The monitor holder with a notebook shelf is mounted on the desk. Position your screen perfectly to reduce neck and eye strain. Thanks to the holder, you will save space on your desk. The arms swivel, extend and retract, and tilt to change the reading angle. Allows displays to be rotated from landscape to portrait mode, etc. Allows easy, ergonomic positioning to reduce workload. Works with almost any LCD monitor (max. 27") and supports notebooks up to 17.3" VESA compatibility: 75 x 75, 100 x 100 mm Strong desk clamp or grommet for easy and secure attachment to your desk Built-in cable management for an organized and tidy workspace Surface finish: powder coating Fit Screen Size: 17"~32" Load capacity: 8 kg (per arm) Tilt range: +90° ~ -30° Rotation range: +90° ~ -90° Screen rotation: +180° ~ -180° Installation: Desk clamp or grommet Max. Desk Thickness: Clamp: 10 ~ 80mm, Grommet: 10 ~ 40mm Cable Management: Yes

The Neomounts DS70-810BL1 is a full motion desk mount for one flat screen up to 32" with a maximum weight capacity of 9 kg. The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of your screen. Additionally, the mount features gas spring height adjustment (26,5-55 cm) and depth adjustment (0-49 cm), to create the perfect working position. Additionally, the DS70-810BL1 features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management clips ensure orderly routing of the cables. Due to the short T-Rex® upper arm, only minimal depth is required when placed near a wall or separation panel. This allows the screen to be positioned further away from the user which is better for the eyes and also leaves more space for good ergonomic working posture. The DS70-810BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Unused hole patterns can be covered using one of Neomounts VESA adapter plates. The DS70-810BL1 is equipped with an Quick-release VESA system for easy installation and comes with both desk clamp and grommet.

The Neomounts DS60-600BL3 NERO monitor arm is the perfect choice for those looking for a sturdy and versatile solution for three monitors up to 27" with a weight capacity of 6 kg per screen. This full motion monitor arm offers maximum flexibility thanks to its versatile tilt (90°), rotate (360°) and swivel (180°) technology, enabling you to always find the optimal viewing angle for an ergonomic working posture.The NERO desk mount features manual height and depth adjustment, allowing you to adjust your workspace completely to your liking. In addition, the clever 180° stop mechanism prevents the mount from making contact with the wall or separation panel when installed near it. The welded base guarantees optimal stability and sturdiness. The practical cable management system ensures neat routing of cables. In addition, the base of the DS60-600BL3 provides a convenient space to place a phone, for a tidy desk.The DS60-600BL3 is suitable for screens that meet pattern 75x75 or 100x100 mm. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available. For a seamless connection of the screens, the micro-adjustment function can be used.Installation of the NERO is quick and easy. The Easy-release system makes it easy to attach or detach the screen. Additionally, fixing the clamp to the desk only takes a few actions and, in addition to manual installation, can also be installed using an Allen key or drill for even faster installation. The NERO monitor arm's quick-span lever also allows for easy adjustment of the arm's height without additional tools.With sustainability in mind, the packaging of the NERO monitor arms is 100% plastic-free and made entirely of recyclable cardboard and paper.

ASUS Fragrance Mouse MD101. Formfaktor: Ambidextrous. Bevægelsesdetekteringsteknologi: Optisk, Enhedsgrænseflade: RF trådløs + Bluetooth, Bevægelsesopløsning: 2400 dpi, Knapper type: Trykte knapper, Antal knapper: 3, Rulle type: Hjul. Strømkilde: Batterier. Produktfarve: Lyserød

The Neomounts FL40-450BL12 is a full-motion pole mount for flat screens up to 42" with a maximum weight capacity of 25kg. The versatile tilt (25°) and swivel (180°) technology allows you to create the optimum viewing angle. The mount can be leveled for the perfect installation. The FL40-450BL12 has a depth of 7.6-32.2cm and is suitable for screens that meet VESA hole pattern 75x75 to 200x200mm. The mount is equipped with a cable management system to secure and route any loose cables.

DisplayPort -> HDMI active cable reduction AXAGON RVD-HI20C2 for connecting an HDMI monitor/TV/projector to a computer with a DisplayPort output. A hardware converter with no installation required provides high-quality video output up to 4K/60 Hz Ultra HD. Popular resolutions such as 2K/144 Hz Quad HD or 1080p/240 Hz Full HD are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colours and contrasts without restrictions. The Plug and Play technology, makes it ideal not only for professionals but also for home users who want to easily and efficiently expand their multimedia setup. Enjoy a home cinema experience with stunning 4K visuals, or use the adapter for conferences and presentations. Its perfect for schools and interactive spaces where computers are frequently connected to HDMI devices. Graphic designers and video creators will appreciate the detailed display. The adapter is compatible with monitors from brands such as Dell, HP, Lenovo, ASUS, Samsung, LG, Sony, MSI, and others, ensuring its versatility and reliability. Thanks to HDCP 2.3 support, you can enjoy your favourite streaming services in 4K resolution without restrictions, including Netflix, Disney+, HBO Max, Amazon Prime, and Apple TV+. It also supports lossless audio transmission, best enjoyed on modern TVs. HDCP support must be enabled on all connected devices as well as by the streaming service itself. The video cable is made of high-quality materials, ensuring excellent reliability. The DP connector features safety latches that prevent accidental disconnection. The cable and connectors are protected against bending and breakage. With its 1.8 m length, the adapter ensures a reliable connection even to more distant monitors or projectors. The cable is unidirectional, i.e., it functions as a DisplayPort to HDMI converter, not the other way around. Input (connection to computer): DisplayPort v1.4 DP connector with latch (M) male Connector latch control button Output (connection to monitor / TV / projector): HDMI v2.0b HDMI A (M) male connector The most widely supported resolutions: 4K/60, 30 Hz Ultra HD 2K/144, 120, 100, 60 Hz Quad HD 1080p/240, 144, 120, 100, 75, 60 Hz FullHD Other supported resolutions:The resolution and refresh rate depend on the monitor and graphics card used. max. 4096 x 2160 (17:9) @60Hz DCI 4K 3840 x 2160 (16:9) @60Hz UHD-1 4K (UHDTV) 3840 x 1600 (21:9) UW 4K (Ultrawide 1600p) 3840 x 1200 (32:10) 4K (Super ultrawide 1200p) 3840 x 1080 (32:9) 4K (Super ultrawide 1080p) 3440 x 1440 (21:9) UWQHD (Ultrawide 1440p) 2560 x 2048 (5:4) QSXGA 2560 x 1920 (4:3) 2560 x 1600 (16:10) WQXGA 2560 x 1440 (16:9) @144Hz QHD 2560 x 1080 (21:9) UWFHD (Ultrawide 1080p) 2048 x 1536 (4:3) QXGA 2048 x 1152 (16:9) QWXGA 1920 x 1440 (4:3) 1920 x 1200 (16:10) WUXGA 1920 x 1080 (16:9) @240Hz FullHD/1080p 1856 x 1392 (4:3) 1792 x 1344 (4:3) 1680 x 1050 (16:10) WSXGA+ 1600 x 1200 (4:3) UXGA 1600 x 900 (16:9) HD+ 1536 x 864 (16:9) 1440 x 900 (16:10) WXGA+ 1400 x 1050 (4:3) SXGA+ 1366 x 768 (16:9) HD 1360 x 768 (16:9) HD 1280 x 1024 (5:4) SXGA 1280 x 960 (4:3) SXGA- 1280 x 800 (16:10) WXGA 1280 x 768 (5:3) WXGA 1280 x 720 (16:9) HD/WXGA/720p 1280 x 600 1152 x 864 (4:3) XGA+ 1024 x 768 (4:3) XGA 800 x 600 (4:3) SVGA Other features: Supports lossless transmission of up to 8-channel audio 192kHz at 24-bit. Supports DDC (Display Data Channel) intelligent adjustment of resolution, frequency, and other parameters based on the source graphics chip. Supported modes: mirroring the desktop (default setting), extension of the primary monitor area. HDR support (High Dynamic Range, 10 bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support - communication sequence controlling the connection/disconnection of the device while running, HDCP 2.3 (8K, 4K, QHD, FullHD) support- backwards compatible with HDCP 2.2 and 1.4. Support of power saving modes with spinning down controlled by a source device (PC) and a viewing device (monitor/TV). Power supply via bus - no external power is needed. Dimensions 9 x 38 x 21 mm (H x B x D). Weight 71 g (incl. cable). Cable length 1.8 m. Supported operating systems: All versions of Windows, macOS, Linux, Chrome OS and other operating systems. It is a pure hardware converter, the transfer is provided only by the cable chip without computer participation, no drivers are installed, so the compatibility is not dependent on the operating system used. Package contains: DisplayPort > HDM video adapter with cable length 1.8 m, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box with a hanging hole.

Fully Mobile Dual Monitor Desk Mount for screens up to 45" and a maximum weight of 2×20kg - suitable for both flat and curved monitors. This robust desk mount is specially designed for large monitors up to 45 inches, supporting up to 20kg per arm, making it ideal for demanding work environments and high-quality setups. Whether for flat or curved screens, the mount provides maximum stability and flexible, space-saving positioning. Its sturdy, durable construction easily supports heavy monitors while allowing precise adjustment in all directions. The integrated spring tension mechanism ensures smooth weight adjustment, so each monitor can be positioned effortlessly without repeated calibration. The VESA quick-release feature allows fast and easy mounting or removal of monitors. An innovative quick connector simplifies joining the two arm segments, significantly reducing assembly effort. With two flexible mounting options - desk clamp or grommet - the mount can attach to almost any workstation. The built-in 180° rotation limiter prevents accidental collisions with walls or neighboring screens, and smart cable management keeps the setup neat and professional. Perfect for users who value ergonomics, stability, and functionality - in the office, studio, or home. Compatible Screens: Supports flat and curved monitors up to 45" Durable Construction: Maximum load capacity of 20kg per arm Space-Saving: Integrated cable management VESA Quick-Release: Fast and easy monitor attachment/detachment Quick Connector: Joins two arm segments for easy installation Two Mounting Options: Desk clamp or grommet mount Integrated Spring Tension Mechanism: Ensures precise weight adjustment 180° Rotation Limiter: Prevents monitor arms from hitting walls or other screens Tested and Certified by IGR (Institute for Health and Ergonomics)

Der Voyager XP 1470g von Honeywell ist eine solide Lösung für Arbeitsplätze, an denen zuverlässiger 1D- und 2D-Barcode-Scan benötigt wird. Er scannt auch schlecht gedruckte oder beschädigte Barcodes und unterstützt das Scannen von Smartphone-Displays. Damit ist er ein zuverlässiges Arbeitsgerät an Arbeitsplätzen mit hohem Scanaufkommen wie im Einzelhandel oder bei der Zugangskontrolle. Sein Gehäuse ist nach IP52 geschützt und übersteht auch Stürze aus einer Höhe von bis zu 1,8 Metern. Dabei fällt sein Gewicht mit 130 Gramm gering aus, was die Handhabung zusätzlich erleichtert.