RaidSonic USB | FW | eSATA | LAN | WLAN case / stadion Case / docking station liides: USB 3.1 Type-C seadme suurus: 12.5 mm seadme liidesed: M.2 NVMe toetatud seadmed: SSD toiteplokk: Bus powered laius: 40 mm kõrgus: 15 mm sügavus: 105 mm Netokaal: 0.1 kg
Product kirjeldus: kaabelxpert Premium USB-C kaabel - USB-C to USB - 2 m Type: USB-C kaabel Features: Sync ja charge, braided pikkus: 2 m ühenduspesa: 24 pin USB-C - plug ühenduspesa (Second End): 4 pin USB Type A - male Rated Current: 2.1 A Compliant Standards: USB / USB 2.0 värv: must, valge
NewStar flat screen desk mount Newstar Full Motion Desk Mount (clamp) for two 17-49" Monitor Screens - Black The NewStar desk mount, model FPMA-D960DVBLACKPLUS is a tilt-, swivel and rotatable desk mount for two screens up to 49". This mount is a great choice for space saving placement on desks using a desk clamp. NewStar's versatile tilt (180°), rotate (360°) and swivel (160°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. NewStar FPMA-D960DVBLACKPLUS is suitable for screens up to 49" (124 cm). The weight capacity of this product is 32 kg each screen. This monitor arm is therefore extremely suitable for widescreens and curved screens. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area.
The compact aluminum AXAGON EE35-XA3 ALINE external box with a high-speed USB 3.2 Gen 1 (USB 3.0) interface intended for 3.5" SATA disks. The UASP support allows you to enjoy the most possible speed of modern hard drives. Reading of S.M.A.R.T. information monitoring the condition of the external disk. Supports spinning down of connected disks as well as the box. Durable cast aluminum case for perfect mechanical protection of the disk and excellent heat dissipation. The decently shaped case with a brushed surface that provides elegant look and prevents unwanted fingerprints. Easy mounting of the hard disk as well as automatic installation can be handled even by a layman and easily create an external disk. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transmission rates up to 5 Gbit/s. Connection via micro USB type B female conector. Device support: SATA II - 3 Gb/s (300 MB/s) interface, Supports 3.5" HDD. Features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Supports 3.5" SATA III / II / I disks of all capacities without limitation. Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the SATA/300 interface used (theor. 3 Gbit/s). Supports UASP (USB Attached SCSI Protocol). SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown support - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Connection via durable large USB 3.2 Gen 1 Type B female connector. An USB-B / USB-A cable 80 cm long is included. A blue, decent LED indicates the connection to the computer's USB port (permanent light) and the data transmission (blinking). The durable box body is a cast aluminum alloy, the box faces are plastic. Simple disk installation - the guides are mounted on the disk, the disk is plugged directly into the SATA connector of the motherboard, and inserted into the box body; the front panel is fastened with two screws using a screwdriver that is included. Compact adapter dimensions 180 x 120 x 32 mm. External box weight 244 g (without cables and disk). Power supply: Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Power switch on the rear panel of the box. AC adapter dimensions 74 x 36 x 91 mm (incl. fork). AC adapter weight 128 g (incl. supply cable). Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 external box for 3.5" SATA disk, USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, mounting strips, screws and the screwdriver, a stand that allows the box to be operated in upright position.
Product kirjeldus: Lanberg power extension kaabel - IEC 60320 C13 to IEC 60320 C14 - 3 m Type: Power extension kaabel pikkus: 3 m ühenduspesa: Power IEC 60320 C13 ühenduspesa (Second End): Power IEC 60320 C14 värv: must
Suure jõudlusega aktiivne kaabel, mis tagab pikendatud 15 m ühenduse arvuti ja USB 3.0 seadme vahel Saab kasutada eraldiseisvana või osana Lindy Active Extension System Pro-st, et luua kohandatud pikendussüsteeme üle 40 m (sõltuvalt kasutatavatest kaablikonfiguratsioonidest) Toetab täielikku USB 3.0 SuperSpeed ribalaiust kiirusega 5Gbps Lihtne kasutada - ühendab seadme olemasoleva USB-kaabliga (maksimaalselt 5 meetrit) 2-aastane garantii
Connect your 4k Ultra HD device to a 4K Ultra HD HDMI DisplaySupports UHD resolutions up to 4096x2160@60Hz 4:4:4 8bitSupports Dolby® True HD, DTS-HD Master Audio up to 32 audio channelsFull support for HEC, ARC and CEC compliant devices2 Year Warranty Lindy’s Active HDMI 2.0 18G cables combine sleek, modern design with superior performance to provide high quality, reliable HDMI transmission over longer distances. These cables support the full 18G HDMI bandwidth to display full 4096x2160@60Hz resolutions with additional support for the REC.2020 colour space that covers the wider colour gamut required for high-dynamic range content, for enhanced contrast and more lifelike colour.Featuring the latest in HDMI cable technology, these cables are ideal for use with source devices such as Sky Q, PS4, XBOX One and 4K Blu-Ray Players, and are perfect for use in home cinema installations that require longer length cables with no compromise on video or audio performance.With support for a range of multi-channel audio formats including Dolby® True HD and DTS-HD Master Audio, even over long distances, these cables ensures an impressive three-dimensional surround sound performance when connected to your amplifier or soundbar. CEC functionality also allows many of your source device settings to be controlled via your display or projectors controls to provide a simple and effective control solution, while avoiding the need for several remote controls.Please Note: Lindy active cables must be connected in accordance with the instructions. The connector marked “display” must be connected to the monitor or screen. Failure to connect the cable in the correct manner will result in no signal. Some projectors have recessed HDMI sockets, please ensure they can accommodate the connector used on this cable. Active HDMI cables cannot be connected together or ‘daisy chained’.
Ühe HDMI 2.0 allika jagamine 4 HDMI ekraanile Toetab kuni 4K@60Hz 4:4:4 resolutsiooni, lisaks toetab HDR-i. HDCP 2.2 tugi täiustatud ühilduvuse tagamiseks EDID-haldus probleemideta paigaldamiseks 2-aastane garantii Lindy 4 Port HDMI 18G Splitter on kompaktne ja kvaliteetne lahendus HDMI 2.0 18G signaalide jaotamiseks mitmele ekraanile ühest allikaseadmest. Toetades kuni 4K 60Hz 4:4:4 8bit, sobib see jaotur suurepäraselt pilkupüüdvate digitaalsete märkide loomiseks jaemüügistsenaariumides, kvaliteetse video näitamiseks eri ruumides meditsiiniasutustes või tagamaks, et publik ei jääks kahe ekraaniga spordibaarides ilma ühestki tegevusest. Suure dünaamilise ulatuse (High-Dynamic Range) lisatoetus tagab, et videosisu on nähtav suurema heleduse, paremate kontrastide ja palju laiema värvivahemiku abil, mis tagab elutruumad värvid. Täiendav võimalus jagada seda jagajat veel kolmele tasandile võimaldab laiendada HDMI jagamise kogemust, mis on ideaalne mitme ekraaniga olukordades, näiteks informatiivsetes ülekannetes lennujaamades, rongijaamades või börsikontorites. HDCP 2.2 tugi tagab, et mitmesuguse 4K-sisu puhul ei teki probleeme allikaseadmetega, sealhulgas digibokside, Blu-Ray-mängijate ja 4K HDR-meediamängijatega ühendamisel, samas kui seadme nutikas EDID-halduslüliti tagab maksimaalse ühilduvuse kuvariga. Jaoturi vastupidav ja kompaktne disain tagab ka selle, et seadet saab paigaldada diskreetselt, et see ei segaks ekraanil kuvatavat sisu.
50m 4 Port USB 2.0 Cat.5e Extender 50m Extension for 4 USB devices powered over Cat.5/6 cable - Extend 4 USB 2.0 ports up to 50m using low cost Cat5/5e/6 network cable (not included) - Power over Cable requires a single power supply to be connected to the transmitter only - Supports USB 2.0 High Speed and USB 1.1 Full Speed / Low Speed - Plug & Play installation This Lindy USB 2.0 Cat.5 Extender can be used to extend the distance between four USB peripheral devices and the host computer by up to 50m. A standard, low cost Cat.5/5e/6 network cable (not included) is used to bridge the connection between the transmitter and the receiver unit. For best performance and compatibility, we recommend the use of solid core patched cables
The DIGITUS LED light delivers the right lighting conditions in all situations. Choose between cold working light or warm cozy light at different increments and of course in different brightness levels - all conveniently adjustable via touch control. The last light setting remains saved until the next use and does not need to be reconfigured. Installation is carried out with a simple clamp mount on the display, power supply is provided via an enclosed USB connection cable. The minimalist light body sets stylish and sophisticated accents on any desk.
The robust ROG Herculx Graphics Card Holder securely fortifies even the most powerful cards, plus offers an easy-to-use design and extensive compatibility. Stand design is compatible with a variety of chassis and doesn’t occupy PCIe slots. Offers a support height of 72-128 mm, delivering a strong, adaptable design. An adjustable wheel and release button enable easy, toolless setup and removal. Included spirit level simplifies setup. Embedded 3D ARGB element is compatible with Aura Sync.
Miniature metal USB-C 3.2 Gen 1 hub AXAGON HUE-M1C fast and easy connects up to four USB devices to laptop or computer. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This small travel hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones USB-C connector. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Compatible with Thunderbolt 3 interface. Connecting USB type C male connector on a fixed 20 cm long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 70 x 24 x 18 mm. Weight 33 g (incl. cable). USB cable length 20 cm. Power / Charging: USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB-C hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Aluminium external AXAGON EEM2-SBC RAW box with USB 3.2 Gen 2 interface is designed for SATA M.2 SSD disks. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-A cable enables a reliable connection to a computer. SATA 6G interface allows you to enjoy the speed of modern M.2 SSD drives. The transmission rate amounts to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern functions, e.g. UASP, TRIM and allows reading S.M.A.R.T. information that monitors the status of the disk. Standby support when idle. SATA M.2 SSD drives can be used in the external box. The advantage is the attachment of three different lengths of SSD cards - 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Screwless box opening facilitates assembly and disassembly of the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in black colour with an elegant brushed finish that prevents unwanted fingerprints. The rounded box design promises pleasant use. The aluminum box body provides very good cooling of the inserted M.2 SSD disk. By inserting the M.2 SSD in the box, you will easily create fast compact external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps. Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. Device support: SATA M.2 SSD disks, designed for B+M key and B key card formats, NGFF 75-pin B key slot for SATA M.2 drives. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports transmission rates 10.000 / 5.000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Support of B+M key or B key SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the box is determined by used disk speed (theoretically up to 650 MB/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - Drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body with cooling holes helps to cool the M.2 SSD disk. Connection via USB 3.2 Gen 2 type C female connector. USB Type C male / USB Type A male cable 20 cm long is included. Other data: External box dimensions 94 x 41 x 10 mm. External box weight 36 g (without USB cable and M.2 SSD disk). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher, Android (OS and device support required). Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed. Package contains: USB-C 3.2 Gen 2 external box for SATA M.2 SSD, USB type C - type A cable, 20 cm long, mounting material, multilanguage quick guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Twisted connection USB-C USB-A Data and Charging AXAGON BUCM-AM10TB TWISTER USB 2.0 cable with USB-C male and USB-A male connectors. The cable is designed for fast data transfers and notebook, phone, tablet and other mobile device charging. It supports up to 480 Mb/s data transfer and charging with current up to 3A. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. Thanks to the twisted and winding design, the cable takes up a minimum of space and is an ideal accessory for the car. In the shortened state, the cable is only 35 cm long and does not obstruct anywhere. When stretched, it comfortably reaches 60 cm away from the socket. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Durable cable gland reduces dangerous cable bending. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-A (M) male Other Features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. USB 2.0, compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s (High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Supported charging technologies: Qualcomm Quick Charge 2.0 / 3.0, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for mobile phones and smartphones, tablets, powerbanks, cameras and other mobile devices with USB-C connector. Other data: cable length 60 cm in stretched state, 35 cm in shortened state, 4.2 mm outer diameter. Package contains: USB-C M USB-A M twisted black cable, packed in a printed and sealed foil package with hanging hole.
Ülikiire HDMI kaabel, tekstiilist kattegaHDMI pistik (tüüp A) > HDMI pistik (tüüp A)Goobay Plus seeria on õhukese, elegantse metallist disainiga Sharkskin Grey. Tipptasemel HDMI-kaabel saavutab tippväärtused eraldusvõime ja ülekandekiiruse osas ning sobib ideaalselt ka selliste nõudlike funktsioonide jaoks nagu ARC, HDR ja 3D-sisu.HDMI™ 2.1 kaabel heli ja video edastamiseks, nt PlayStationist telerisse või telerist SoundBarisse.Sobib universaalselt paljude multimeedia rakenduste jaoks, nt mängude, mängukonsoolide (nt PlayStation 5 või Xbox), Fire TV, Apple TV, sülearvutite ja Blu-ray-mängijate projektsioonidele.HDMI™-kaabel saavutab terava UHD-resolutsiooni kuni 8K @ 60 Hz ja 4K @ 120 Hz (tagurpidiselt ühilduv)Toetab kuni 48 Gbit/s maksimaalset ülekandekiirust pakkimata 8K videote jaoks koos HDR-iga, samuti ARC (Audio Return Channel), HDCP ja 3D-sisu jaoks.Paindlik kõrgekvaliteediline kaabel õhukeste metallpistikutega, paindumiskaitsega ja värviga sobiva tekstiilkaabligaÜhenduskaabli punutud tekstiilmantel tagab meeldiva tunde ja on tundlikele pindadele õrnatoimelineKullatud pistikud hoiavad ära korrosiooni ja on eriti vastupidavad
CABLE HDMI M/M V2.1 40M 8K BLACK OPTICAL AOC LANBERG Optical HDMI cables allow for lossless transmission of audio and video signals over huge distances. Thanks to the use of optical fiber as a conductor, they are extremely thin, which facilitates cable routing, additionally ensuring resistance to electromagnetic interference. The latest HDMI 2.1 (Ultra High Speed) standard allows you to transmit images in 8K quality at a refresh rate of 30 Hz. Using DSC (Display Stream Compression) technology, you can increase the resolution up to a maximum of 10K! ATTENTION Due to its construction, an optical HDMI cable only transmits the image in one direction. Pay attention to the markings on the plugs in order to connect the product correctly.
FPMA-D750DBLACK2 Neomounts by Newstar monitor desk mount Neomounts by Newstar Full Motion Desk Mount (clamp & grommet) for 10-32" Monitor Screen, Height Adjustable (gas spring) - Black
The Cablexpert Premium USB-C cable from Gembird stands out with its exceptional performance and durability. Designed to meet the needs of both professionals and tech enthusiasts, this cable offers a 20 Gbps data rate, ensuring quick and efficient data transfer. It also supports up to 100 W of charging power, making it perfect for fast charging of devices. With 4K60Hz video support, it delivers crystal-clear visuals, ideal for streaming or professional presentations. The cable's construction features metal connectors and a braided cotton jacket, providing not only a sophisticated look but also enhanced durability for long-term use. Compliant with USB 3.2 Gen 2x2 standards, it ensures compatibility with a wide range of devices, making it a versatile choice for various connectivity needs.
Active Optical (AOC) 8K DisplayPort cable "AOC Premium Series", 30 m Active Optical Cables (AOC) use fiber optic technology to transport the digital video signal. This means that the signal can be carried much further than with a traditional copper cable (up to 100 m), and reduces the risk of EMI/RFI interference. DisplayPort AOC cables also have dedicated copper power wires inside, so no external power supply is required. DisplayPort AOC cable uses fiber optic technology - reduces the risk of EMI/RFI in high interference environments Durable extra thin premium quality cable with stylish metal connectors Smaller cable diameter compared to traditional copper DP cables Supports 8K UHD resolutions at 60Hz
The Neomounts DS60-425WH1 NEXT Lite is a full motion desk mount for screens up to 27" with a maximum weight capacity of 8 kg. The versatile tilt (120°), rotate (360°) and swivel (180°) technology allows you to adjust the mount to the optimal viewing angle for your screen. Additionally, the mount has manual height and depth adjustment to create the perfect working position. Due to the short T-Rex® upper arm of the NEXT Lite, only minimal depth is required when placed near a wall or separation panel. This allows the screen to be positioned further away from the user which is better for the eyes and also leaves more space for good ergonomic working posture. The smart internal cable management system ensures orderly routing of the cables. The DS60-425WH1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Neomounts offers various optional VESA adapter plates for deviating hole patterns. The DS60-425WH1 is equipped with an Easy-release VESA system for easy installation and comes with both desk clamp and grommet.
Satechi 6-in-1 USB-C Slim Multiport Adapter on mitmekülgne ja kompakt lahendus, mis ühendab kuus kasulikku porti ühes stiilses seadmes. Adapter toetab 4K HDMI-d, USB-C Power Delivery laadimist, kiiret andmeedastust USB-A ja microSD/SD kaardilugejatega, pakkudes paindlikku ühendusvõimalust erinevate seadmetega. • 4K HDMI väljund, 60Hz värskendussagedusega • 75W USB-C Power Delivery laadimine • Kaks USB-A porti kiirusega kuni 5Gbps • MicroSD/SD kaardilugeja, kuni 104MB/s • Kompaktne ja stiilne alumiiniumkorpus
ROG Aura Monitor Light Bar ALB01 pakub ekraani kohal paigaldatavat valgustuslahendust, mis vähendab silmade koormust ja tagab ergonoomilise töö keskkonna. Selle kohandatav valgus võimaldab reguleerida heleduse ja värvitemperatuuri taset, et sobituda erinevate keskkondade ja tegevustega. Monitori valgusriba kinnitub magnetiliselt monitori ülaosale ja pakub ASUS Aura Sync RGB valgustust, mis täiendab mänguriruumi stiili. • Kohandatav heledus ja värvitemperatuur • Magnetiline kinnitus monitori ülaosale • ASUS Aura Sync RGB valgustus • Silmade koormust vähendav valgustus
Fast external AXAGON EEM2-UB2 ARROW box with USB 10Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find an USB-C -> USB-C cable to connect the box to your computer. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage is the attachment of three different lengths of SSD cards - 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 3.2 Gen 1, USB4 and Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 20 cm in the package. Other data: Box dimensions 115 x 39 x 11 mm. Box weight 43 g (without cable and M.2 SSD disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, USB-C - USB-C cable 20 cm long, 3 thermal conductive pads, mounting material and a screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.
IB-1919M-C42 M.2 NVMe Enclosure via USB4 High-Speed Performance with USB4: Experience data transfer speeds of up to 40 Gbit/s with the IB-1919M-C42, perfect for transferring large files, editing high-resolution videos, and accessing complex datasets with ease. Toolless Installation: Enjoy effortless setup with a toolless design, allowing you to quickly install your M.2 NVMe SSD without any tools. Just slide your SSD in, secure it, and connectit's that easy! Robust Aluminium Housing: The premium aluminum construction offers excellent durability and protection for your SSD, while effectively dissipating heat to maintain optimal performance during extended use. Wide Variety of SSD Compatibility: Designed to accommodate 22x 30/42/60/80 mm SSDs, this enclosure ensures versatility and secure fit for various sizes without needing multiple enclosures. Multi-OS Compatibility: Provides consistent performance with Windows and macOS, making it a reliable solution for connecting different M.2 NVMe SSDs across platforms. Connect to PC via USB4 Type-C: Includes two cablesone for PC connection and one for powerproviding convenience and versatility for your setup.
