Professional Series Freestanding Dual Horizontal Monitor Arm - Free-standing design allows dual monitors to be used in spaces that do not allow a clamp or grommet mount - Create a multi-display productive workspace and position your monitors to reduce eye, neck and shoulder strain - Low profile, weighted base provides enhanced stability - Minimize clutter with the intuitive cord management system - Holds 27” monitors up to 17.6 lbs. - Meets VESA mounting standards
Adjustable wall-mounted monitor arm for 3 monitors Set your screen perfectly Lightweight and tiltable design Monitor wall mount with single arm for 3 monitors The arm rotates, extends and retracts, and tilts to change the reading angle Monitor mounting strip for mounting 3 monitors side by side Allows easy, ergonomic positioning to reduce workload Works with almost any LCD monitor (max. 27") Durable, adjustable gas spring suitable for monitors weighing 16 kg Built-in cable management keeps your workspace organized and tidy
The Neomounts DS75S-950BL2 NEXT One is a full motion desk mount for two screens up to 27" with a maximum weight capacity of 8 kg per screen. The versatile tilt (120°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (19,1-52,7 cm) and depth adjustment (17,3-71 cm), to create the perfect working position. The displays can be individually adjusted in height, to guarantee perfect screen alignment. Additionally, due to the flexibility of the VESA heads, the screens can be positioned in large cockpit setup. The handle is height adjustable for maximum comfort. The DS75S-950BL2 features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The black VESA plates and crossbar of the NEXT One integrate stylishly with the black back of your screens. The DS75S-950BL2 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. For non-standard hole patterns, Neomounts has various optional VESA adapter plates available. The monitor arm is equipped with a Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation.
DS70-250BL1 Neomounts desk monitor arm Neomounts DS70-250BL1 full motion monitor arm desk mount for 17-35" screens - Black The Neomounts DS70-250BL1 NEXT Slim is a full motion desk mount designed for screens up to 35", boasting a maximum weight capacity of 9 kg suitable for both flat and curved displays. The versatile tilt (90°), rotate (360°) and swivel (180°) technology enables seamless adjustment to any desired viewing angle to fully optimize the screen's capabilities. With the gas spring height adjustment (21,5-49,5 cm) and depth adjustment (7-52,5 cm) you can effortlessly adjust the mount to suit your ergonomic needs.
The AK-66 2.5" HDD / SSD enclosure is a device that provides reliable protection for the drives that store your data. With a transfer speed of 5 Gbps, you can enjoy fast and smooth file transfers. Hassle-free compatibility Compatibility with Windows, macOS and Linux means that you can easily use this device on any computer, without having to install additional drivers. The enclosure is compatible with 2.5" HDD/SSD with a height of 7 or 9.5mm, giving you the flexibility to choose your media. Security and convenience The enclosure can be easily stored in a wide temperature range, from -20C to 50C. so you do not have to worry about the safety of your data even in adverse conditions. Thanks to its compact dimensions of 126 × 79 × 13 mm, it is convenient to carry, yet spacious enough to accommodate a drive. Technical specification: Interface: USB 3.0 SuperSpeed (up to 5 Gbps) Drive type: HDD / SSD 2.5 with a height of 7 or 9.5 mm Data transfer rate up to 5 Gbps Input voltage: 5 V Storage temperature: -20C 50C Dimensions: 126 × 79 × 13 mm Weight: 54 g Colour: black Compatible with: Windows XP / Vista / 7 / 8 / 10 / 11, MacOS, Linux
The Maclean MC-968 is a versatile and durable desk-mounted LCD/LED monitor mount, designed to support screens from 17" to 57" and up to 27 kg. With its gas spring mechanism, it offers effortless height adjustment and customizable tilt and rotation for optimal ergonomics, enhancing comfort and reducing neck and back strain. Cable grommets keep your workspace tidy by organizing cables neatly. Built from high-quality materials, the MC-968 ensures monitor stability and safety, while its sleek design complements any office or home setup. - Brand: Maclean - Model: MC-968 - Double arm - Gas spring - Designed for monitors with diagonal: 17-57 inches - Minimum/Maximum horizontal spacing: 75/200 mm - Minimum/Maximum vertical spacing: 75/200 mm - Maximum load: 27 kg - Adjustable tilt from -20 to +60 degrees - Pivotable: 180 degrees - Mounting to desk top or in cable hole - VESA standard: 75x75, 100x100, 200x,100, 200x200 mm - Color: black.
Holder for Notebooks up to 17" non-slip and height-adjustable ESSENTIAL MATERIAL: The notebook holder is made of high-quality aluminium through and through. The extremely careful workmanship and the smoothly moving joints are evidence of a high-quality product ALWAYS AT EYE HEIGHT: The Z-shaped design allows the notebook screen to be individually adjusted to eye level. This supports an ergonomic posture and is easy on the neck and shoulders SMOOTH-FREE: Silicone strips are attached to the top and bottom edges of the shelf to ensure that your laptop rests securely on the shelf and does not fall off even when tilted LIABLE: The laptop stand can easily support a weight of up to three and a half kilos in all settings. If only a low angle of inclination is selected, even more than 3.5 kg is possible WELL COOLED: A large part of the shelf surface is perforated with slots. This ensures that the IB-NH300 is sufficiently cooled when the notebook is in place and even during intensive use
Monitor mount 17-45 inches 16kg gas spring Maclean monitor mount, computer screen holder, double arm, with gas spring, 17"-45", 16 kg, MC-969 Universal LCD or LED monitor mount with the possibility of mounting to a desk top or in a cable hole. The mount is designed for monitors with a screen diagonal from 17" to 45" and a maximum weight of up to 16 kg. The MC-969 mount provides great working comfort, optimizes ergonomics and visibility by adjusting the angle of tilt, rotation, height, etc. This allows you to adjust the position of the monitor fully to your workstation. The mount will easily attach the screen in VESA standard: 75x75, 100x100 mm. The mount is compatible with LED, LCD, OLED monitors of such brands as Sony, LG, Samsung, Philips, Sharp, Panasonic, Toshiba, Grundig, Pioneer, JVC, Benq, Sanyo, NEC, Hyundai, Hitachi, iiyama, Acer, Gigabyte. The mount is equipped with a gas spring for infinite height adjustment of the monitor. This makes it easy to adjust the position of the monitor to your preference, raising or lowering it in just a few seconds. The mount is made of durable materials that guarantee the stability and safety of the monitor. The solid construction allows you to place monitors up to 45" without worrying about their safety. The modern and neat design of the mount makes it blend in well with most office or home interiors. The MC-969 mount is easy to install and can be attached to a desk top or in a cable hole. All the necessary mounting hardware is included. Cable grommets help to guide cables in an orderly manner. This reduces clutter on your desk, resulting in a neater look and a more organized workspace.
The Gembird Cablexpert A-CM-VGAF-01 is a versatile video adapter designed for delivering high-quality visuals. With a maximum output resolution of 1920 x 1080 at a refresh rate of 60 Hz, this adapter ensures smooth image performance for presentations, gaming, or any display needs. The USB-C male connector easily connects to devices, while the female 15 pin HD D-Sub (HD-15) connector accommodates various monitors and projectors, making it an ideal choice for home and professional use. Supporting DisplayPort Alternate Mode, this adapter allows for efficient video output without compromising on quality. Its Plug-and-Play functionality means users can set up in moments without the need for additional software, and with compliance to ISO 9002 and RoHS standards, it meets essential safety and environmental criteria. Experience seamless connectivity with the Gembird Cablexpert adapter, formulated for everyday use.
The AXAGON PCES-SA4X4 PCI-Express controller extends your desktop PC with four SATA III ports with a transmission rate up to 6Gb/s. The card equipped with ASMedia chipset not only supports SATA 3.0 specification, but also other SATA technologies such as Hot-Plug, Native Command Queue (NCQ), TRIM, or Port Multiplier. Easy installation without the need to install drivers on most operating systems. Included low profile bracket allow controller installation into standard and also low-profile PC cases. Input: PCI-Express 3.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.0 /2.1. Number of 2-Lane (x2) lines, compatible with x4 / x8 / x16 PCIe slots. The bandwidth of 2-Lane PCI-Express 3.0 bus 4 GB/s bidirectional. Output: 4x independent Serial ATA port, SATA III 6G standard. 4x internal 7-pin SATA data connector. Supports all SATA I / SATA II / SATA III optical drives, SSDs and hard disks of all capacities. Other features: Full Plug and Play support. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with the ATA AHCI (Advanced Host Controller Interface) specification revision 1.4. Fully supports Hot Plug connecting and disconnecting of SATA devices while running. Supports Native Command Queuing (NCQ). TRIM feature support for SSD disks. Port Multiplier Command Based Switching feature support. Boot support from connected disk incl. cooperation with computer motherboard BIOS / UEFI. 4x LED to indicate connected disks activity. Four 2-pin sockets for connecting the HDD LEDs of the computer case. The ASMedia ASM1164 chipset is used. Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.x and above. Package contains: PCI-Express controller with standard bracket, low profile bracket, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
2-Bays 2.5"/3.5" SSD/HDD Clone Station with card reader and USB-ACompatible with both 2.5"/3.5" HDDs and SSDs Supports standalone cloning without a computer Integrated card reader for CF and SD memory cards High-speed data transfer via USB connection Includes a power adapter for reliable operation.
The Neomounts DS70-450BL1 NEXT Core is a full motion desk mount for one flat screen up to 42" with a maximum weight capacity of 15 kg. The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (26,1-55 cm) and depth adjustment (0-51,4 cm), to create the perfect working position. The DS70-450BL1 NEXT Core features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS70-450BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Unused hole patterns can be covered using one of Neomounts VESA adapter plates. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation. The inner packaging of the NEXT Core is plastic free and made from cardboard and paper. For wall installation, the AWL75-450BL wall adapter is optionally available.
The Dell Compact Form Factor All-in-One Stand - CFS25 enhances the way users interact with their workspace by offering a blend of ergonomic design and comprehensive functionality. Designed to support display screens ranging from 19" to 27", this stand is a perfect fit for a wide array of desktop and monitor setups. It comes equipped with an adjustable height feature, allowing for a 150 mm height range to ensure comfortable viewing angles and improved posture. The stand also offers a suite of adjustments including tilt, swivel, and the ability to switch between portrait and landscape modes, catering to the dynamic needs of modern professionals.In addition to its ergonomic benefits, the CFS25 stand focuses on workspace organization. With integrated cable management and additional accessories like a cable organizer cover and monitor base extender, it minimizes desk clutter, leading to a more productive and less distracting work environment. Security features such as a Kensington security slot and padlock loop provide peace of mind, knowing that your setup is protected. Whether for office use or a home setup, the Dell Compact Form Factor All-in-One Stand - CFS25 is an essential tool for anyone looking to enhance their workstation's functionality and aesthetic.
The AXAGON ADSA-CC CLONE MASTER 2 universal USB-C 10Gbps adapter connects up to two drives to your computer quickly and easily at the same time. Easily connect any 2.5" or 3.5" drive directly to the adapter's external SATA connector. Simply insert the NVMe M.2 drive into the adapter body without the use of a screwdriver or other tools. You can also connect a SATA M.2 drive to the adapter using an external adapter such as the AXAGON RSS-M2SD. In the package you will find a USB-C USB-C cable with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Thanks to the cloning function without the need to connect to a PC, the adapter can be used as a stand-alone device for convenient duplication and disk imaging. The cloning direction is adjustable via a switch, so you can easily choose whether to clone the contents of an NVMe M.2 drive to a SATA drive or vice versa. After all the data is copied, the target disk is an exact copy of the original disk. This is the easiest way to transfer the contents of one drive to another, including a working operating system (Windows, macOS, Linux ...). In addition to the fast USB 10Gbps interface, the adapter also supports all important functions for working seamlessly with different types of drives, such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected M.2 and 2.5" drives only from the USB port. In case of connecting a 3.5" drive, the included power adapter is of course already required. These features make the CLONE MASTER 2 adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal helper for backup, migration, data transfer and storage, testing and cloning discs, etc. Input: USB 10Gbps (USB 3.2 Gen 2). Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. M.2 slot device support: NVMe (PCI-Express) M.2 SSD one-sided and double-sided drives. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Supports M-KEY & B+M-KEY NVMe M.2 SSD disks. No capacity limitation. Support for devices connected to the SATA port: SATA 2.5"/3.5" SSD/HDD. SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD. No capacity limitation. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning direction switch - from NVMe M.2 drive to SATA drive or from SATA drive to NVME M.2 drive. SSD cloning speed up to 500 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0) and USB 480Mbps (USB 2.0). Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. The total adapter bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8.1 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Support for booting from disks connected to the adapter. HDD Auto Spindown - automatic spinning down when they idle for 10 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Full Plug and Play support. Connection via USB-C female connector. Cable USB-C male USB-C male 30 cm length + USB-C -> USB-A reducer included. Adapter dimensions 102 x 68 x 15 mm. Adapter weight 73 g (without accessories). Power: USB Bus Power - for M.2 and 2.5" drives, power via the USB bus is sufficient. Self Power - for 3.5" drives, power is required using the included external AC/DC adapter 12V - 2A with a 150 cm cable. Power switch. LED indication: the green LED indicates that the adapter is powered on (permanent light). 2x orange LED indicates connection for each of the disks (permanent light) and data transmission (blinking). 4x blue LED indicates cloning process 25% -50% -75% -100% (blinking), resp. cloning completion (permanent light). Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: M.2 + 2.5"/3.5" SSD/HDD adapter, power adapter 100-240V / 12V-2A, 4 thermal conductive pads, USB-C USB-C cable 30 cm long + USB-C -> USB-A reduction, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
DST-Micro 140, USB-C Laptop Micro Docking Station with 4K Support & 1.4m 60W Charging Cable 4k HDMI, PD 3.0 60W, USB 3.2 Gen 1, SD & microSD - Adds 2 USB Type A ports (5Gbps), an HDMI port and an SD card reader to your notebook - Integrated 1.4m USB Type C cable for convenient and flexible laptop charging - Supports HDMI resolution up to Ultra HD 4K 30Hz - Allows USB Power Delivery (3.0 up to 60W) to charge the laptop while using the DST-Micro 140.
The DIGITUS DA-73109 USB extension cable enhances connectivity and data transfer rates for devices. Featuring double shielded technology, this cable ensures reliable performance in demanding environments. With USB 3.0/ USB 3.1 compliance, it supports data rates of up to 5 Gbps, allowing for efficient and fast data transfer. The male 24-pin USB-C connector on one end and the female 24-pin USB-C connector on the other provide versatility in connecting various devices.
The DIGITUS DA-73112 USB extension cable is designed to enhance connectivity with its data transfer capabilities. Supporting USB 3.0 and USB 3.1 standards, this double shielded cable allows for a maximum data rate of up to 5 Gbps, ensuring efficient performance.Featuring a male 24 pin USB-C connector on one end and a female 24 pin USB-C connector on the other, this cable offers versatility and ease of use. With its sturdy design and reliable functionality, the DIGITUS USB extension cable is a solution for extending your USB connection, making it an accessory for various devices.
The Club 3D CSV-1549 is a USB-C 3.2 Gen 1 hub designed for connectivity and performance. With its 18 cm length, this hub provides easy access to multiple ports without the clutter of longer cables. It features three USB 3.2 Gen 1 ports and one Gigabit LAN connection, enabling fast data transfer rates of up to 5 Gbps and reliable networking capabilities. The compact and slim design allows for seamless integration into any workspace, making it an option for users seeking portability and functionality. This hub complies with various standards such as FCC, RoHS, and EMI, ensuring safety and sustainability. Its full duplex capability and flow control features enhance data handling efficiency, while the bus-powered functionality and downstream charging support add convenience for users. The desktop form factor caters to diverse uses, whether at home or in the office, promoting a streamlined workflow.
The AR-85 holder is designed for LED/LCD TV 32-70" sets with vertical and horizontal adjustment; corner 622mm - mounting the handle on 2 independent arms - possibility of mounting on different walls - handle dedicated to large TVs, Vesa 600x400 - additional adjustment from -3 to 3 levels of TV level - the handle has a lock to prevent the TV from slipping - vertical adjustment -15 to 5 degrees - horizontal adjustemnt -45 to 45 degrees - application: corner mounting
The Neomounts DS20-425BL1 NEXT Lite is a full motion desk mount for laptops up to 17,3" with a maximum weight capacity of 5 kg. The versatile tilt (120°), rotate (360°) and swivel (180°) technology allows you to adjust the mount to the optimal height and viewing angle for your laptop. Additionally, the mount has manual height and depth adjustment to create the perfect working position. Due to the short T-Rex® upper arm of the NEXT Lite, only minimal depth is required when placed near a wall or separation panel. This allows the screen to be positioned further away from the user which is better for the eyes and also leaves more space for good ergonomic working posture. The smart internal cable management system ensures orderly routing of the cables. The DS20-425BL1 is equipped with an Easy-release VESA system for easy installation and comes with both desk clamp and grommet. The packaging of the NEXT Lite is 100% plastic free and entirely made from cardboard and paper.
The Neomounts DS90-325BL1 is a full motion height adjustable desk mounted workstation for screens up to 32", keyboard and mouse. The mount can support screens up to 9 kg (curved: 6 kg), while the keyboard tray can support max. 1 kg. The versatile tilt (70°), rotate (360°) and swivel (180°) technology allows the monitor arm to change to any viewing angle to fully benefit from the capabilities of the screen. The keyboard tray includes a wrist support and mouse pad for optimum comfort. The workstation desk mount has a large height adjustability range from 44-95 cm and can be used both seated and standing. To ensure quick repositioning and the most optimal working position, the DS90-325BL1 features gas spring height adjustment for both the monitor arm and keyboard tray arm. The smart cable management system ensures orderly routing of the cables. The DS90-325BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm and is equipped with a Quick-release VESA system for fast and easy installation. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available.
Wall mount for two monitors 17-32 9kg spring Maclean wall mount for two monitors, 17-32", 9kg max, mechanical spring, MC-988 The Maclean MC-988 universal wall mount is designed for mounting two monitors with screen sizes from 17 to 32 inches and a maximum weight of up to 9 kg per monitor. The mount allows you to adjust the height, tilt angle and rotation of the monitors. This allows you to adjust the monitors to the optimal viewing position, which improves working comfort and reduces strain on the spine and eyes. The MC-988 mount is ideal for offices and homes where it is necessary to place two monitors side by side. Thanks to the ability to adjust the angle of tilt and height, the user can adjust the position of the screens to their needs, which is especially useful for office work, graphic design or multimedia viewing. The mount also keeps things tidy thanks to cable grommets, which reduces clutter and improves the aesthetics of the workspace.
Breyta Laptop Stand - Black 12 height adjustments with unique front lift to provide additional height for ergonomic viewing comfort. Compact, lightweight and portable design that is easy to set up and adjust – ideal for hybrid working. Holds up to 14” laptops weighing up to 4kg. Modern and simple design aesthetics available in black and white colour options. Made from materials which are 100% recyclable and made to last with extended 5-year limited warranty. Tested by FIRA International Ltd to comply with the ergonomic requirements set out in European Health and Safety Legislation: EN ISO 9241-5.
Duracell Procell Intense batteries are the industrial standard for duracell reinforced alkaline batteries.Procell Alkaline Intense Power 9V industrial batteries are specially designed to last longer (compared to normal Duracell Procell Alkaline 9V batteries) in professional high-power devices that require high power or pulse operation, such as electronic door locks, soap dispensers or security cameras.These high-quality alkaline batteries are designed for enterprises and designed for the highest loads. They are characterized by high efficiency throughout the life period even in difficult conditions!!
IB-MS203-T Single Monitor Stand Desk mounted Less Space Required - The slim and ergonomic design of the IB-MS203-T single monitor desk mount minimizes space usage, promoting a more flexible and productive workplace. This well-engineered solution enhances your setup without compromising functionality. Smart Torque Adjust - Equipped with a built-in spring gauge, the Smart Torque Adjust feature allows for easy adjustments based on different monitor weights. This ensures a comfortable height adjustment thanks to mechanical spring support. Cable Management - Integrated cable management routes cables under the arm, reducing clutter for a clean look. This thoughtful design minimizes tangling and tripping hazards, enhancing the aesthetics of your workspace. Grommet and Desk Mount - The mount features a versatile grommet and desk mount base that suits most desks, with adjustable clamp height for easy installation. This adaptability ensures a secure fit on various desk surfaces. VESA Slots - Designed with VESA slots for easy monitor installation, it supports both 75x75 mm and 100x100 mm VESA standards. This makes setup quick and hassle-free. Easy Assembly - Crafted from a robust combination of steel, plastic, and high-quality aluminum, this mount securely supports monitors up to 32 inches and 9 kg. Its compact packaging is optimized for e-commerce, ensuring easy assembly right out of the box.
The Club 3D DisplayPort cable provides a visual experience with support for resolutions up to 8K at 120 Hz. Its shielding technology ensures connectivity and performance, emphasizing compliance with display standards like DisplayPort 2.1, making it suitable for gaming and professional applications. Built with stress-relief features, the cable maintains durability over its lifespan of 10,000 insertions, allowing for a reliable connection in any setup. Additionally, with HDR support and bidirectional functionality, this cable adapts to various display needs.Designed with quality materials, including aluminum braid shielding and thermoplastic elastomer jacket, the cable offers effective EMI protection while being halogen-free. The VESA DP54 certification ensures the cable meets rigorous standards, providing peace of mind for users. Its ability to support Multi-Stream Transport (MST) and a 54 Gbps data rate enhances performance, making it an essential accessory for modern display solutions.
Maclean MC-114 TV stand/cart is a sturdy and functional solution for professional use in offices, conference rooms, schools or event spaces. The structure is made of durable powder-coated steel, ensuring stability and safe use even with large screens. Thanks to the use of casters, the whole thing can be moved easily and safely, allowing flexible space management and quick adaptation of the room layout to current needs. The cart is compatible with TVs from 55 to 100 inches and VESA mounting standard up to 900x600 mm. The maximum load of up to 120 kg guarantees stable support of even the largest LED/LCD screens. The TV can be hung at four different heights, allowing you to adjust the position of the screen to a specific location and users' needs. Such a solution ensures an optimal viewing angle and improves the comfort of content viewing in different conditions.
HDMI 4K/60Hz Cat.6 Extender over IP 1G, up to 120m / 200m, max. 253 receivers, IR control - Kit (Transmitter/Receiver) This HDMI IP Extender Set enables UHD (4K/60Hz, 4096×2160p at 60Hz) AV signal transmission over long distances using standard Cat.6 or higher network cables. It supports point-to-point connections up to 200m and point-to-multipoint setups with up to 253 receivers, offering flexible and scalable distribution for professional AV, digital signage, or corporate installations. Key Features: Long-distance transmission: Point-to-point HDMI AV signal via Cat.6 (or higher) cable up to 200m IP scalability: Supports up to 253 receivers (displays) for point-to-multipoint distribution Flexible network use: Leverages existing 1G network infrastructure or additional 1G switches for virtually unlimited signal reach via cascading Expandable system: Additional receivers (RX) available separately (model: DS-55352) High-quality UHD image: 4K/60Hz (4096×2160p) with ultra-low latency of 150220ms for smooth, sharp video IR remote control: Integrated IR interface allows controlling the input source directly from the output display Network cable support: Compatible with Cat.6 or higher cables Wall-mountable: Space-saving installation option This kit combines professional-grade HDMI 4K transmission with maximum flexibility, making it ideal for AV installations, home theaters, or enterprise use.
Desk mounting arm for a single monitor The arm rotates, extends and retracts, tilts to change the reading angle, and allows the display to switch from landscape to portrait mode and more. Enables easy ergonomic positioning to reduce strain Works with almost any LCD monitor (max. 32") Durable adjustable gas springs, suitable for monitors weighing up to 10 kg Sturdy desk clamp for easy and secure attachment to your desk Removable VESA plate for easy installation Built-in cable management for an organized and tidy workspace Compatible with VESA, max. 100 x 100 mm
Universal Travel Adapter 20 W, White Universal travel adapter suitable for use in over 200 countries Lightweight and easy-to-use design: ideal for travel Practical integrated USB ports for smartphone charging Universal travel power adapter with 3 fast USB charging ports Four detachable power plugs (US/UK/EU/AU), usable in over 200 countries Practical universal AC socket supports most types of power plugs GaN technology: compact design with increased energy efficiency USB-C ports support 20 W Power Delivery, USB-A port supports 18 W QC 3.0 AC socket with child safety shutters Protected by a 10 A fuse (BS1362 compliant, spare fuse included) Note: Does not convert voltage or change mains frequency.
Tabletop TV stand (swivel), 23" - 55" Stylish design with tempered glass base Integrated practical cable management function minimises cable visibility Swivel base allows to rotate TV in the perfect viewing angle Tabletop TV stand with tempered glass base Supports most 23" - 55" LCD TV's Allows up to 70 degrees swivel 3-stage height adjustment accommodates several TV sizes and enables a better viewing height VESA compatible, max. 400 mm x 400 mm Integrated cable management
Strong steel wall mount for LCD screens Supports most 37" - 75" LCD TVs VESA compatible, max. 400mm x 400mm Automatic spring locks with quick-release cables allow for quick and easy TV mounting and removal Convenient integrated bubble level ensures perfect alignment Distance from wall: 24mm Includes all necessary installation materials
