Toetab videopeegeldust ja laiendatud töölaua režiimi. Ühendused: DisplayPort pesa kuni HDMI pesa: DisplayPort pesa kuni HDMI pesa Vastab DP 1.2 spetsifikatsioonile ja HDMI 1.4a spetsifikatsioonile. Toetab kuni 3840 x 2160@60Hz 8-bitist värvi 2-aastane garantii See kaabel võimaldab ühendada DisplayPortiga varustatud arvuti 4K HDMI kuvariga või projektoriga. Märkused audiotoe kohta: Heliväljundit üle HDMI toetatakse ainult siis, kui süle- või lauaarvuti graafikakaart toetab heliväljundit üle DisplayPort. Mitmed sisseehitatud graafikaadapterid, näiteks Mobile Intel 4 Series Express Chipset sülearvutites (nt Dell E6400), EI toeta heliväljundit üle DisplayPort, isegi kui HDMI-tugi (Intel High Definition Audio HDMI Service) on audiokontrollerite jaoks paigaldatud. Sellistel juhtudel tuleb luua eraldi audioühendus. Pakendi sisu: DP-HDMI adapteri kaabel Toetab kuni 3840 x 2160 60 Hz 4:2:0 8-bitist resolutsiooni Ühildub DP 1.2 ja andmeedastuskiirusega 1,62 ja 2,7 Gbit/s Ühildub HDMI 1.4a spetsifikatsiooniga ja andmeedastuskiirusega kuni 3,0 Gbit/s ning 3D 1080p-ga Toetab kuni HDMI Ultra HD 4Kx2K resolutsiooni Toetab pakkimata heli (LPCM), samuti DTS, Dolby Digital, DTS-HD ja Dolby True HD. Täielik HDCP 1.3 sisukaitse tugi 24-bitine audiosamplitesuurus kuni 192kHz proovisageduseni Toetab DIP hajaspektri taktimist
Connect your 4k Ultra HD device to a 4K Ultra HD HDMI DisplaySupports UHD resolutions up to 4096x2160@60Hz 4:4:4 8bitSupports Dolby® True HD, DTS-HD Master Audio up to 32 audio channelsFull support for HEC, ARC and CEC compliant devices2 Year Warranty Lindy’s Active HDMI 2.0 18G cables combine sleek, modern design with superior performance to provide high quality, reliable HDMI transmission over longer distances. These cables support the full 18G HDMI bandwidth to display full 4096x2160@60Hz resolutions with additional support for the REC.2020 colour space that covers the wider colour gamut required for high-dynamic range content, for enhanced contrast and more lifelike colour.Featuring the latest in HDMI cable technology, these cables are ideal for use with source devices such as Sky Q, PS4, XBOX One and 4K Blu-Ray Players, and are perfect for use in home cinema installations that require longer length cables with no compromise on video or audio performance.With support for a range of multi-channel audio formats including Dolby® True HD and DTS-HD Master Audio, even over long distances, these cables ensures an impressive three-dimensional surround sound performance when connected to your amplifier or soundbar. CEC functionality also allows many of your source device settings to be controlled via your display or projectors controls to provide a simple and effective control solution, while avoiding the need for several remote controls.Please Note: Lindy active cables must be connected in accordance with the instructions. The connector marked “display” must be connected to the monitor or screen. Failure to connect the cable in the correct manner will result in no signal. Some projectors have recessed HDMI sockets, please ensure they can accommodate the connector used on this cable. Active HDMI cables cannot be connected together or ‘daisy chained’.
Kuvab HDMI-signaalid 4 ekraanil üheaegselt ühest allikaseadmest Toetab kuni 4K 60Hz 4:4:4 resolutsiooni, lisaks toetab HDR-i. Väljavõte digitaalsest ja analoogheli HDMI-st mitte-HDMI võimendite jaoks Omab korralikku lülitit 4K-st 1080p-ni alandamiseks 2-aastane garantii Lindy 4 Port HDMI 2.0 18G Splitter koos heliga on multifunktsionaalne lahendus kvaliteetsete HDMI-signaalide jaotamiseks 4 ekraanile samaaegselt ühest allikaseadmest, eraldades samal ajal eraldi digitaalse või analoogheli. Toetades kuni 4K 60Hz 4:4:4 8bit resolutsiooni, sobib see jaotur suurepäraselt silmatorkavate nelja ekraani digitaalsete siltide loomiseks jaemüügistsenaariumides, spordi näitamiseks mitmel ekraanil spordibaarides või huvitavate mitme ekraani hariduslike esitluste levitamiseks messidel. Jaoturil on ka eraldi optilised ja 3,5 mm audiopordid, mis võimaldavad hõlpsasti HDMI-st heli eraldada, et ühendada mitte-HDMI võimendid või helibaarid, mis on ideaalsed videote toetamiseks koos kaasahaarava mitmekanalilise heliga. Jaoturitel on ka integreeritud lüliti, et vähendada sisendsignaali Full HD-signaaliks, mis muudab vanemate kuvarite paigaldamise muretuteks, tagades samal ajal, et vaataja saab oma kuvarilt alati optimaalse pildi.
Ühe HDMI 2.0 allika jagamine 4 HDMI ekraanile Toetab kuni 4K@60Hz 4:4:4 resolutsiooni, lisaks toetab HDR-i. HDCP 2.2 tugi täiustatud ühilduvuse tagamiseks EDID-haldus probleemideta paigaldamiseks 2-aastane garantii Lindy 4 Port HDMI 18G Splitter on kompaktne ja kvaliteetne lahendus HDMI 2.0 18G signaalide jaotamiseks mitmele ekraanile ühest allikaseadmest. Toetades kuni 4K 60Hz 4:4:4 8bit, sobib see jaotur suurepäraselt pilkupüüdvate digitaalsete märkide loomiseks jaemüügistsenaariumides, kvaliteetse video näitamiseks eri ruumides meditsiiniasutustes või tagamaks, et publik ei jääks kahe ekraaniga spordibaarides ilma ühestki tegevusest. Suure dünaamilise ulatuse (High-Dynamic Range) lisatoetus tagab, et videosisu on nähtav suurema heleduse, paremate kontrastide ja palju laiema värvivahemiku abil, mis tagab elutruumad värvid. Täiendav võimalus jagada seda jagajat veel kolmele tasandile võimaldab laiendada HDMI jagamise kogemust, mis on ideaalne mitme ekraaniga olukordades, näiteks informatiivsetes ülekannetes lennujaamades, rongijaamades või börsikontorites. HDCP 2.2 tugi tagab, et mitmesuguse 4K-sisu puhul ei teki probleeme allikaseadmetega, sealhulgas digibokside, Blu-Ray-mängijate ja 4K HDR-meediamängijatega ühendamisel, samas kui seadme nutikas EDID-halduslüliti tagab maksimaalse ühilduvuse kuvariga. Jaoturi vastupidav ja kompaktne disain tagab ka selle, et seadet saab paigaldada diskreetselt, et see ei segaks ekraanil kuvatavat sisu.
The robust ROG Herculx Graphics Card Holder securely fortifies even the most powerful cards, plus offers an easy-to-use design and extensive compatibility. Stand design is compatible with a variety of chassis and doesn’t occupy PCIe slots. Offers a support height of 72-128 mm, delivering a strong, adaptable design. An adjustable wheel and release button enable easy, toolless setup and removal. Included spirit level simplifies setup. Embedded 3D ARGB element is compatible with Aura Sync.
DST-Pro USB4, USB-C Laptop Docking Station Connect an 8K display or 2 displays at 4K 60Hz and peripherals over a single cable Connects an HDMI and/or a DisplayPort display, USB peripherals and power over a single cable Supports 8K 30Hz for a single display or 4K 60Hz for two displays (MST)* Integrated 4 port USB SuperSpeed 10Gbps Hub (3 x Type A, 1 x Type C) USB Power Delivery capable up to 100W Dimensions 129x69.5x48mm Weight 0.3 kg
Compact AXAGON ADSA-FP2A SLIM adapter with USB-A 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-A cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-A 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type A male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 20 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-A - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
4-port USB 3.1 (Gen 1) Type-C hub YOUR GATEWAY TO USB WORLD USB 3.1 ultra-high data transfer speed up to 5 Gbps Powered hub: perfect for peripherals that need more power Suitable for USB Type-C OTG devices and PC Windows 11 compatible
The DUB-M530 5-in-1 USB-C hub with HDMI and SD/microSD card reader allows you to instantly add an HDMI display, SD card reader, and two additional USB 3.0 ports to your computer.
Displayport (M) V1.1 -> HDMI (M) cable 5M black The Displayport to HDMI cable is the perfect way to connect Displayport-equipped devices to HDMI-equipped displays. With this, Displayport to HDMI adapters will no longer be needed. The cable allows you to support Full HD resolution, which will be perfect for office solutions. ATTENTION Due to its construction, the Displayport to HDMI cable only transmits the signal in one direction DP >> HDMI.
Active Optical (AOC) 8K DisplayPort cable "AOC Premium Series", 10 m Active Optical Cables (AOC) use fiber optic technology to transport the digital video signal. This means that the signal can be carried much further than with a traditional copper cable (up to 100 m), and reduces the risk of EMI/RFI interference. DisplayPort AOC cables also have dedicated copper power wires inside, so no external power supply is required. DisplayPort AOC cable uses fiber optic technology - reduces the risk of EMI/RFI in high interference environments Durable extra thin premium quality cable with stylish metal connectors Smaller cable diameter compared to traditional copper DP cables Supports 8K UHD resolutions at 60Hz
The Neomounts by Newstar DS70-450WH1 is a full motion desk mount for one flat screen up to 42" with a maximum weight capacity of 15 kg. The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (26,1-55 cm) and depth adjustment (0-51,4 cm), to create the perfect working position. The DS70-450WH1 features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS70-450WH1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Unused hole patterns can be covered using one of Neomounts by Newstar's VESA adapter plates. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation.
The universal table mount allows you to mount two monitors vertically, one above the other. Suitable for monitors (curved screen) up to 32 cm / max. 8 kg. Quick release closure function - allows you to quickly attach and remove monitors Ergonomically perfect adjustment of the monitor position to the user's height Monitors can be tilted, tilted, swiveled and height-adjusted Monitor arm: tilt: -45°/+45°, slide: -45°/+45°, front panel rotation: -180°/+180° Integrated cable management solution: for an organized and tidy workspace
SuperSpeed USB AXAGON ADSA-SN COMPACT HDD/SSD DOCK docking station easily and quickly connects any SATA disk to your computer. A handy helper for the easiest and fastest way of connecting SATA disks to your computer - just plug the disk into the base. Automatic installation can be done even by the layman. SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports sleeping of both the connected disks and station. Low laid centre of gravity of the docking station for good stability. Rubber feet to reduce vibrations. Modern minimalist design of housing with aluminium casing. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB rate of up to 5 Gbit/s. Connection via micro USB type B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" HDD/SSD, supports 3.5" HDD, max. disk capacity all without limitation, max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0, backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport). SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down after period of inactivity lasting 15 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. cable micro USB-B / USB-A 80 cm long is included. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Power switch. Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Station dimensions 130 x 65 x 59 mm. Weight 190 g. Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 HDD dock, micro USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with clearly indicated parameters.
The DIGITUS DA-71156 storage enclosure offers a reliable solution for expanding storage capacity with support for M.2 SSDs. Utilizing a compact design with a length of 25 cm, this external enclosure is crafted from aluminum, ensuring durability and efficient heat dissipation. With a data transfer rate of up to 10 Gbps for NVMe drives and 6 Gbps for SATA drives, it efficiently handles large files while maintaining optimal performance. An LED indicator provides visual feedback on operational status, making it user-friendly.
