Varia lisaseadmed

U/UTP RJ45 male (8P8C), RJ45 male (8P8C),

Goobay USB-C HDMI adapter cable (4k 60 Hz) HDMI adapter, 1.8 m, Black

USB 2.0 Hi-Speed kaabel, must USB 2.0 isane (tüüp A) > USB 2.0 mini isane (tüüp B, 5-pin) Sobib paljude USB-keskuste, kaardilugejate, navigatsiooniseadmete, kaamerate või MP3-mängijate jaoks. Sünkroonimiseks ja laadimiseks Hi-Speed andmeedastus kuni 480 Mbitti

Kaabel Goobay 59122

Goobay 62110

Goobay 67995 USB-C to micro-B 3.0 cable

【Cutting Edge 16K DisplayPort Cable】UGREEN16K DisplayPort cable 2.1 supports high resolutions 16K@60Hz, 8K@240Hz, 4K@240Hz. And backward compatible with Display Port 1.4 1.3, 1.2. Single-screen video output of 16K@60Hz (DSC 1.2a), and dual-screen supported. The DP to DP cable also supports HDR, HDCP 2.2, FEC forward error correction and UHBR10 which guarantee your immersive viewing experience. (Note: 20-pin is disabled with no power. No need to worry about the 20-pin issues.) 【VESA Certified 80Gbps DP Cable 2.1】This Display Port 2.1/2.0 cable features an unprecedented bandwidth of 80Gbps, nearly 3 times what was available in the previous DP 1.4 spec. Stable and high-speed transmission without signal loss. The DisplayPort cable also backward compatible with previous DP 1.4 and DP 1.2 standards. The monitor cable meets the VESA Standard and supports 3D&HDR and Dolby&eARC to provide you with amazing sound and image quality. 【Optimized for Game Enthusiasts】The DP cable 2.1 is highly recommended for game setups as it works well with game monitors and graphics cards, delivering high-quality video and audio signals with no lag or interference. It supports FreeSync and G-Sync, which are essential for gaming. You can easily connect multiple monitors with Multi-Stream Transport (MST). Variable refresh rate (VRR) and auto low latency mode (ALLM) bring you smoother game experience especially in FPS, 3A and MOBA games. 【Ultra Durability】UGREEN DisplayPort cable port with no buckle design can prevent accidental damage. DP cable 2.1 is made of 28AWG tinned copper and tinplate which features triple shielding and resistance with EMI. Aluminum alloy housing is resistant to rust and can accelerate heat dissipation. The Display Port cord has a strong nylon braided jacket, which is 10X more durable than PVC. It can provide higher connectivity and longer service life for better signal transmission. 【Wide Compatibility】UGREEN 16K@60Hz DisplayPort to DisplayPort cable is compatible with all devices with DP ports, compatible with Nvidia RTX 3070/RTX 3080/RTX 3090/RTX 4090/RTX 4080ti/RTX 4070ti graphics cards, and AMD Radeon RX 6800 XT/RX 6900 XT/RX 7900 XT graphics cards, and Odyssey G8/G9, Ben Q, Alienware, LG Ultragear monitors, HDTV, Fire TV, computer and others. Support DP, DP++ modes, backward compatible 2.0/1.4/1.3/1.2 DisplayPort 2.1 Reinforced Joint Bare Copper Nylon Braided

Length 1.5 m | Connectors 3.5 mm 4-pin to RCA | 3xRCA | 1x4-pole 3.5mm

Clone & DockingStation for SATA & M.2 HDDs/SSDs with USB 3.2 Gen 1 Type-C connection Simple cloning: Just one touch of a button initiates the cloning process. No software installations or PC setups are required. The device is able to clone directly to M.2 PCIe NVMe drives from various sources Versatile compatibility: Each of the three independent slots can be connected to the PC simultaneously. The tool-less design allows for quick docking of drives, which is beneficial when working with different data types High-speed performance: Thanks to USB 3.2 Gen 2 technology, data transfer rates of up to 10 Gbit/s are achieved. With the ICY BOX combination cable, no additional adapter is required Universal drive compatibility: The device supports M.2 SSDs, 2.5/3.5 HDDs and SSDs. It offers easy setup and reliable performance, is perfectly portable and easy to use Multi-OS compatibility: Provides consistent performance and compatibility with Windows and macOS environments and is a reliable solution for connecting a variety of M.2 and SATA drives

SuperSpeed USB 5 Gbps docking / cloning station AXAGON ADSA-D25 CLONE MINI quickly and easily connects up to two 2.5" disks to your computer at the same time. The USB Micro-B connector on the dock and included USB Micro-B USB-A cable enables a connection to computer. This compact helper will allow you easiest connection of any 2.5" SATA drive to computer or notebook. Just insert one or two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps. Speed up to 5 Gbit/s. Connection via USB Micro-B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface. Supports 2.5" SSD/HDD. Max. disk capacity all without limitation. Max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB Micro-B female connector. USB Micro-B USB-A cable 60 cm long is included. LED indicating SSD/HDD dock power and disk activity in both shafts. Station dimensions 89 x 58 x 59 mm. Weight 137 g. Power: Power cable USB-A 3.5/1.3 mm DC 5V length 1 m is included in the package. The cable allows powering the station from the computer USB-A port or a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g. AXAGON ACU-DS16. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDD and SSD can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported operating systems: MS Windows 7 / 8 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SSD/HDD dock, USB Micro-B USB-A cable 60 cm long, power cable 100 cm.

X1-3D Desk Mount Gas Spring Monitor Arm Full Motion for More Comfort Thanks to the approved gas lift technology, the monitor can be moved completely freely in all directions, even after installation. This makes it child's play to pull the monitor up, move it away or completely realign the height, depth, and tilt. Ergonomic Screen Adjustment The X1-3D turns the simplest screens into ergonomic wonders, and those who spend a lot of time in front of a screen will quickly appreciate this advantage: The optimal adjustment of your screens automatically promotes an ergonomic sitting posture. It doesn't matter whether you work sitting or standing, the monitor arm allows you to optimally adjust it to your environment. Enlarged Working Area Whether you use your desk as a workstation, battle station or a mix of both. By keeping your 'neutral reach zone' free, the X1-3D provides more space around the monitors and allows you new ways to set up and optimise your workspace. Less Visible Cables With the X1-3D, tangled cables around monitors are a thing of the past. The cables can simply be carried and fixed inside the arm. They thus disappear from the visible area and support a tidy overall appearance. Simple and Quick Assembly Thanks to the table clamp, the monitor arm can be placed freely and easily on the edge of the table. The arm is completely pre-assembled and is simply placed on the rod. Assembly or later repositioning is therefore child's play and can be done quickly. Universally Compatible The monitor arm supports ultrawide monitors with a screen diagonal of ≤ 43", as well as 16:9 monitors with a diagonal of ≤ 40". The monitor must have a VESA 75 or VESA 100 mount and must not exceed a total weight of 10 kg. Quality You Can Rely On To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how to improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality but also durability. It's a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee on the X1-3D.

Improve the airflow inside your chassis with the Genesis Oxal 120 3-Pack. These powerful fans, also known from the Genesis Irid 505 V2, 503 V2, and 505F, are specifically designed for cases with dense filters, providing significantly better performance than standard solutions. Looking for strong performance as well as low levels of noise? You can rely on it thanks to the fan's high performance, even at low revs, and the reinforced bearing (up to 50,000 hours). And that's not all. EQUIP YOUR CASE WITH GENESIS OXAL 120 3-PACKIntroducing the Genesis Oxal 120 3-Pack - the fans that has been featured in our most efficiently designed product, the Genesis Irid 505F case, placing it at the forefront of the best-ventilated PC cases in journalistic tests. Their high performance is the result of combining a 120 mm diameter with a maximum rotational speed of 1300 RPM, along with high static pressure. This ensures adequate airflow in PC cases that have both standard and thickened filters, which have the primary function of limiting the amount of dust entering the interior. Achieving efficient component cooling has never been easier. HIGH PERFORMANCE EVEN AT LOW REVSThe Genesis Oxal 120 is a low-speed fan, which means that you get standard fan performance comparable to that of a 1400 RPM fan at a much lower RPM. If you're looking for a balance between performance and silence, you can achieve it by adjusting the speed of the Genesis Oxal 120 to a maximum of 80%. Using the maximum revolutions (up to 100%) is recommended for demanding situations, such as overclocked components at the time of their full load. SIMPLE INSTALLATIONThe Genesis Oxal 120 3-Pack are equipped with a 3-pin connector with both male and female plugs. This allows you to connect the fan directly to the motherboard and use it to control the rotational speed based on the current temperature of the processor. But that's not all - the double plug design makes it easy to connect multiple fans together and plug them into a single fan header, making it easier to organize the inside of a PC case.

USB Type-C 5-in-1 multi-port adapter (Hub + HDMI + PD + card reader + LAN) - 5-in-1: 3-port USB hub, 4K HDMI, Gigabit LAN port, card reader and USB Type-C PD charge support - Fast Gigabit networking and Superspeed USB 3.1 data transfer via USB hub - Practical card reader - Plug & Play Product Type USB Hub 1xHDMI, 3xUSB 3.1 1xUSB-C, 1xSD Card Slot 1xRJ45

Vii oma striimimine järgmisele tasemele. • 8 seadistatavat LCD nuppu • 4 füüsilist keeratavat nuppu • Vaheta stseene või kohanda heli • Visuaalne tagasiside aitab nuppude vajutamist tuvastada • Lisa GIF-e, pilte, videosid või heli • Lisa sissejuhatuseks või lõpuks graafilisi elemente • Ühildub Windows 10 või uuemaga ja macOS 10.13 või uuemaga

SuperSpeed USB-C 5Gbps docking / cloning station AXAGON ADSA-DC DUAL CLONE easily and quickly connects up to two 2.5" or 3.5" drives to the computer at the same time. The connection to the computer is enabled by the modern double-sided USB-C connector on the dock together with the supplied USB-C USB-A cable with a length of 80 cm. This handy helper will allow you easiest connection of any 2.5/3.5" SATA drive to computer or notebook. Just insert one or even two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux...). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5Gbit/s. Connection via USB-C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, Supports 2.5" HDD/ SSD Supports 3.5" HDD. Max. disk capacity all without limitation. Max. 2.5" disk height - all without limitation. Features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2) and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transmission in Windows 8 and later. TRIM support to reduce the gradual degradation of SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. HDD/SSD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spin down - shutdown of disks when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB-C female connector. USB-C USB-A cable 80 cm long is included. LED indicating HDD/SSD dock power and disk activity in both shafts. Station dimensions 73 x 130 x 97 mm. Weight 307 g. Power: Power supply using the included external AC/DC adapter 12V - 3A with 150 cm long cable. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDDs and SSDs can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported OS: Windows, macOS, Linux, Chrome OS. Package contains: HDD/SSD dock, USB-C USB-A cable 80 cm long, power adapter 100-240V / 12V-2.5A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

15cm USB-C to DisplayPort 4K adapter USB Type C male to DisplayPort female adapter cable For connecting a DisplayPort display to a USB Type-C video source (e.g. smartphone or laptop) Works on any device that supports DisplayPort Alternate Mode (Alt Mode) Supports 4K UHD resolutions at 60 Hz

Fast external AXAGON EEM2-UB2 ARROW box with USB 10Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find an USB-C -> USB-C cable to connect the box to your computer. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage is the attachment of three different lengths of SSD cards - 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 3.2 Gen 1, USB4 and Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 20 cm in the package. Other data: Box dimensions 115 x 39 x 11 mm. Box weight 43 g (without cable and M.2 SSD disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, USB-C - USB-C cable 20 cm long, 3 thermal conductive pads, mounting material and a screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

LANBERG SFTP stranded kaabel CU, cat. 6, 305m, gray

Maclean MC-906

• Maksimaalne kaal (mahutavus): 120 kg • Ekraani minimaalne suurus: 139,7 cm (55") Ekraani maksimaalne suurus: 2,67 m (105") • Toetatud ekraanide arv: 1 • Kinnituse tüüp: Põrand • Paigaldussüsteemi ühilduvus (max): 800 x 600 mm • Elektriline Kõrguse reguleerimine • Valge iiyama MD-WLIFT2031-W1, 120 kg, 139,7 cm (55"), 2,67 m (105"), 800 x 600 mm, Kõrguse reguleerimine, Valge

The DIGITUS USB 2.0 4-Port Hub makes it simple to connect up to 4 USB devices at the same time to a PC or Mac. Plug in your favorite USB devices and profit from the very fast connection. This product has a clear and elegant design with a piano-black finish on the top and bottom surface, as well as an aluminium edge.- USB 2.0 compliant- Four USB 2.0 ports- USB Mini B jack- Supports USB High Speed 480Mbps and Full Speed 12Mbps- Supports Media Copy and Hot-Swap- Supports hot-plugging, plug and play compliant- Color: black, silver- Dimensions: 5.4cm x 2.8cm x 1.2cm- Incl. power supply (5V / 2A) and USB cablePortsUSB 2.0 4Features support Hot-Plugging; Plug & Play fähig; support Media-Copy and Hot-Swap; support USB High-Speed 480 Mbps and Full-Speed 12 Mbps; USB Mini B Socket

Height-Adjustable Monitor Stand, 1732 inches, up to 9 kg Stylish design with a tempered glass base Position your screen perfectly for an optimal, ergonomic setup Compact, space-saving solution Product Features: Height-adjustable monitor stand with a tempered glass base Easy, stepless height adjustment up to 420 mm Allows screen rotation and tilt, as well as switching between landscape and portrait mode Works with almost any LCD monitor (max. 32" / 9 kg) Sturdy glass base plate for secure placement on any desk Built-in cable management system for an organized and tidy workspace VESA compliant, max. 100 × 100 mm

This compact adapter from LogiLink allows the operation of serial (COM port also called RS232 interfaces) devices to the USB 2.0 port. Ideal for operating serial end devices such as modems or ISDN adapters and older hardware to newer generations of notebooks and PCs that have no serial port. A 80cm USB extension cable is included.- Chipset: FTDI FT232RL- Connector 1: USB A male- Connector 2: RS232 (9-pin) male- Fixing with thumbscrews- According to USB 2.0 standard- incl. USB extension cable- and protection caps- With Windows 8 supportPistmik 1USBPistmik 2RS232SuguSisestatav konnektorÜhilduvad operatsioonisüsteemidWindows 98SE/ME/2000/2003/ 2008/XP/Vista/7/8Pakendi laius100 mmPakendi sügavus212 mmPakendi kõrgus30 mmPakendi kaal130 gKaablid kaasa arvatudUSB

Tootja: LogiLink Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: andmed puuduvad 2-ühenduse tüüp: andmed puuduvad Lisaandmed: Input Lisainfo: andmeleht

Kasutage võrratut energiat ja pulseerivaid andmevooge, mis elektrifitseerivad kõigi kasutajate südameid: 240 W võimsusega ja 40 Gbit/s andmeedastuskiirusega ületab see kaabel hõlpsasti kõik varasemad USB-ühendused. Olgu tegemist siis suure jõudlusega sülearvutite, võimsate dokkimisjaamade, graafikakaartide või Thunderbolt™ 4 pordiga emaplaatidega - selle eksklusiivne jõudlus teeb USB4™-kaablist kõigi kaasaegsete võrkude elulõnga. Lisaboonusena tagavad kvaliteetsed metallpistikud eriti pika kasutusaja ja meeldiva tunde.240 W, mis on võimalik tänu Power Delivery'ile (EPR), muudavad USB-kaabli suure jõudlusega sülearvutite, dokkimisjaamade ja muude energiamahukate multimeediaseadmete peamiseks toiteallikaks.Kuni 40 Gbit/s tagavad välkkiire andmeedastuse - see teeb USB-C™ kaabli 8 korda kiiremaks kui USB 3.0 ning sobib ideaalselt NVMe kõvaketaste, HD-filmide, seriaalide, muusika ja fotode edastamiseksKaabel toetab ülikõrgeid lahutusvõimeid kuni 8K @ 60 Hz/4K @ 120 Hz ühe monitori puhul ja 4K @ 60 Hz, kui signaal on jaotatud kahe monitori vahel jaotuskeskuse kauduToetab HDR10 ja sobib ideaalselt HD-videote striimimiseks välistele monitoridele, teleritele või projektoritele, nt nutitelefonidest, sülearvutitest, tahvelarvutitest ja muudest vastuvõtvatest seadmetest.Seni kõige paindlikum USB-kaabel: Võimaldab andmetunneldamist DisplayPort™ 2.1 ja PCIe™ 4.0 kaudu ning seda saab ühendada otse Thunderbolt™ 4 või Thunderbolt 3™ pordiga.Toetab USB-C™ porte DisplayPort™ Alt Mode'iga kõrglahutusega videoülekannete jaoks ning ühildub tagurpidi USB 3.2, 3.1 ja 3.0 (USB-C™) andmetega.USB4™ ühildub tipptasemel mängukomponentidega, nt Razer Blade 18, Corsair Voyager, Apple Studio Display või AMD Ryzeni protsessorid (Zen 3+, Zen 5).

Ergotron LX Pro Monitor Arm grey (45-682-293) (45682293)

USB Audio adapter 7.1 sound effect

Crystal Clear 8K 60Hz HDR Video Output

BenQ ScreenBar Pro on nutikas monitorivalgusti, mis pakub optimaalselt reguleeritud valgustust, vähendades silmade väsimust ja parandades tööefektiivsust. Selle kompaktne ja stiilne disain sobib ideaalselt igale töölauale, tagades ühtlase valgustuse ilma ekraani peegeldusteta. • Automaatne heleduse ja värvitemperatuuri reguleerimine • Lihtne paigaldus monitori ülaosale • Vähendab silmade väsimust • Kompaktne ja ruumisäästlik disain • Ei tekita ekraanil peegeldusi

Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems. This product's key features include a high-performance 64-bit quad-core processor, dual-display support at resolutions up to 4K via a pair of micro-HDMI ports, hardware video decode at up to 4Kp60, 4GB of RAM, dual-band 2.4/5.0GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0 and PoE capability (via a separate PoE HAT add-on). The dual-band wireless LAN and Bluetooth have modular compliance certification, allowing the board to be designed into end products with significantly reduced compliance testing, improving both cost and time to market.

Ugreen 40254

This compact adapter easily meets the requirements for a stable and reliable network connection for gaming, streaming and video conferencing. Works with most laptops, including Chromebooks and USB-C devices. 2.5x faster speeds for streaming and gaming. The USB-C to 2.5Gb Ethernet adapter offers 2.5x faster speeds, making it ideal for gaming, video streaming, video conferencing, and other high-performance tasks. This adapter is also lightweight and compact, making it easy to pack for travel and quickly set up with most laptops, including Chromebooks and other USB-C devices. LED indicator You always know when you're connected by checking the built-in LED indicator. Ready USB-C device. Our adapter provides connection between a wide range of devices, including laptops, tablets, phones, TVs, VR systems and game consoles. Access your files from anywhere. You can access photos, videos and more while traveling and away from your computer. Wake on LAN features mean you can remotely wake up your computer via Ethernet to recover files on the go. Belkin Dock Utility device compatibilityBoost your network security with free dock utility software! The Belkin Dock Utility takes your team to the next level by enhancing the already powerful features of your existing Belkin docks, hubs, and adapters that have an ethernet port. This includes those with Thunderbolt, GaN, USB-C, DisplayLink, and SiliconMotion technology.The downloadable software is compatible with Windows and macOS, and implementing it for your business gives you Media Access Control (MAC) address mirroring, network interface management, and fully automatic operation to deliver a seamless user experience.

Strimer Wireless GPU 2×8-PIN Light guides: 8 Number of LEDs: 116 Compatible with 8-pin GPU connector L-Wireless Sync supported (controller required) Highly customizable addressable RGB extension cables Create a unique PC look with outstanding quality and material Compatible with L-Connect 3 for personalized light effects Power LED strips directly from the extension cable

STRIMER WIRELESS 24P L-Wireless Sync supported (controller required) Highly customizable addressable RGB extension cables Create a unique PC look with outstanding quality and material Compatible with L-Connect 3 for personalized light effects Power LED strips directly from the extension cable

Universal stand for LCD or LED monitors with the possibility of mounting to a desk or table. The holder is suitable for monitors with a diagonal of 17" to 32" and a maximum weight of 9 kg. The stand optimizes ergonomics and visibility by adjusting the tilt angle, swivel, height, etc. This enhances working comfort and helps prevent neck, back and eye fatigue. Thanks to MC-572N you will be able to reduce desk clutter and create a neater look and a more organised workplace. The removable VESA plate makes it quick and easy to install the monitor on the holder. The kit includes a desk clamp that allows the stand to be securely mounted to a desk or a table, and a mounting ring that allows the stand to be installed in the cable grommet. This gives the user more flexibility in choosing the mounting position of the monitor. Compatible with LED and LCD TVs and monitors: Sony, LG, Samsung, Philips, Sharp, Panasonic, Toshiba, Grundig, Pioneer, JVC, Benq, Sanyo, NEC, Hyundai, Hitachi, Iiyama, Acer. The stand can be easily attached to the screen according to VESA standard: 75x75, 100x100 mm.

• Internal • Host interface: Mini PCI Express • Output interface: RS-232 • Green

Product kirjeldus: CyberPower Switched ATS PDU44005 - power distribution unit seadme tüüp: Power distribution unit - rack-mountable Juhtme pikkus: 3.05 m Rack Size: 1U kaal: 3.4 kg Input Wiring: 1-phase sisendpinge: AC 200-240 V Sisendühendused: 2 x 2 x power IEC 60320 C20 Output Ühendusi: 8 x power IEC 60320 C13 2 x power IEC 60320 C19 võrguseadeing: Ethernet, serial Remote Management Protocol: SNMP 1, Telnet, SNMP 3, HTTP, HTTPS, TFTP, SSH, SMTP, NTP, DHCP, IPv4, IPv6, LDAP, RADIUS Lisatarvikud: Rack mount brackets, screws, kaabel ties, cord retention tray värv: must mõõtmed (WxDxH): 43.3 cm x 21.5 cm x 4.4 cm Manufacturer Warranty: 2-year garantii

Satechi Mini NVMe SSD Enclosure - USB-C to NVME SSD 2230 Adapter (space gray)

OWC Thunderbolt cable 2m 40Gbit/s must