9-teiliges Kabelset von CableMod, inklusive Kabelkämmen, für Corsair-Netzteile, sehr hochwertige Einzel-Ader-Sleeves in Schwarz und Blutrot, blickdichtes Textil
Lindy power cables are perfect for use in professional areas (recording studios, light systems and also for event locations of any kind, etc.) - but you can also use them in private sections. Due to the high temperature resistance from -10 to 70°C during operation these cables can also be used in non-air-conditioned areas.
The Club 3D CSV-1383 is a high-performance HDMI video/audio splitter designed to meet the needs of demanding audiovisual environments. With its ability to support video resolutions up to 4096 x 2160 at a 60 Hz V-Sync rate, it delivers exceptional image clarity and smoothness, making it suitable for professional video editing, gaming, and streaming applications. The device offers a robust solution with 1 HDMI input and 8 HDMI outputs, facilitating seamless content sharing across multiple displays without degradation of signal quality.Advanced features such as 12-bit Deep Color, 3D support, 4K resolution, and HDR enhance the viewing experience by providing vibrant, lifelike colors and greater depth. The splitter's metal housing and power spike protection feature ensure durability and reliability, safeguarding your investment and connected devices against power fluctuations. Additionally, the inclusion of a reset button and status indicators for port status and power simplifies device management and troubleshooting, making the CSV-1383 an essential tool for creating an efficient, high-quality audiovisual setup.
HDMI 2-in-1 Bi-directional Switch for 8K60Hz or 4K120Hz The Club 3D CSV-1384 is a HDMI™ 2-in-1 Bi-directional Switch for 8K60Hz or 4K120Hz. It can switch either of two sources to one display or switch one source to either of two displays. Press the switch button to select channel 1 or channel 2. With a piece of 0.5m / 1.64 ft length fixed HDMI™ cable (pigtail), this Switch not only reduces cost but also saves time for customers. This kind of HDMI™ Switcher routes high definition video (in multiple resolutions and up to 8K60Hz) and digital audio from the sources to display units.
The Club 3D CSV-1385 is a versatile video/audio splitter designed to enhance your multimedia experience. With the ability to connect one HDMI source to four outputs, this splitter supports resolutions up to 3840 x 2160 at 120 Hz, ensuring crisp and vibrant visuals. The device is compliant with standards such as FCC, RoHS, and EMI, which means it adheres to safety and environmental regulations, making it an appropriate choice for various settings.Equipped with features like 3D support and iron housing for durability, the CSV-1385 is built for performance and longevity. It includes indicators for port status and power, allowing for easy monitoring. The external power adapter provides stable voltage for reliable operation, making this video splitter a practical addition to home or professional setups.
Travel adapter, US socket - EU plug AP-01 The AP-01 travel adapter is an essential accessory for those travelling between the US and Europe. It enables devices with a US plug to be connected to European sockets (EU). This solution allows you to use your electronics freely during your trip. Thanks to its compact and lightweight design, the adapter will easily fit into any travel bag. Compactness Easy to use and versatile For use with earthed and ungrounded devices Why choose a Savio travel adapter? The AP-01 adapter with EU plug and US socket provides convenience and safety when using American electrical appliances in Europe. This small device has a number of practical features, including: easy connection of various electrical appliances (e.g. hairdryer, smartphone) to the US plug in countries with German and French socket systems; convenient transportation thanks to its compact size and lightweight design; compatibility of the Savio adapter with type A and B plugs and for use with type E and F sockets, the so-called European 3-pin sockets; safety of use thanks to earthing; high load power - up to 3750 W. Configurators Country of origin: Antigua and Barbuda, Bahamas, Barbados, Belize, Bermuda, Bolivia, Cambodia, China, Colombia, Costa Rica, Cuba, Democratic Republic of the Congo, Ecuador, El Salvador, French Polynesia, Guam, Guatemala, Guyana, Haiti, Honduras, Jamaica, Japan, Canada, Laos, Lebanon, Liberia, Mexico, Micronesia, Netherlands Antilles, Nicaragua, Peru, Philippines, Puerto Rico, Saint Vincent, Saudi Arabia, Tahiti, Taiwan, Thailand, Trinidad and Tobago, US Virgin Islands, United States of America, Venezuela, Vietnam, Yemen Destination country: Liberia, Madagascar, Mali, Martinique, Monaco, Mongolia, Morocco, Niger, Poland, Reunion, Saint Vincent and the Grenadines, Senegal, Slovakia, Syrian Arab Republic, East Timor, Tunisia, Afghanistan, Albania, Algeria, American Samoa, Andorra, Armenia, Aruba, Austria, Azerbaijan, Belarus, Bhutan, Bosnia and Herzegovina, Bulgaria, Cape Verde, Chad, Croatia, Denmark, Egypt, Estonia, Ethiopia, Faroe Islands, Finland, Georgia, Germany, Greece, Greenland, Guinea, Hungary, Iceland, Indonesia, Iran, Italy, Jordan, Kazakhstan, Democratic People's Republic of Korea, Republic of Korea, Kyrgyzstan, Lao People's Democratic Republic, Latvia, Liberia, Libya, Lithuania, Luxembourg, Macao, Macedonia, Moldova, Monaco, Montenegro, Mozambique, Myanmar, Netherlands, Netherlands Antilles, New Caledonia, Niger, Norway, Portugal, Romania, Russia, San Marino, So Tomé and Príncipe, Serbia, Slovenia, Spain, Suriname, Sweden, Tajikistan, Thailand, East Timor, Turkey, Turkmenistan, Ukraine, Uruguay, Vietnam, Bahrain
STRIMER WIRELESS 16-12 L-Wireless Sync supported (controller required) Highly customizable addressable RGB extension cables Create a unique PC look with outstanding quality and material Compatible with L-Connect 3 for personalized light effects Power LED strips directly from the extension cable
STRIMER WIRELESS 16-8 L-Wireless Sync supported (controller required) Highly customizable addressable RGB extension cables Create a unique PC look with outstanding quality and material Compatible with L-Connect 3 for personalized light effects Power LED strips directly from the extension cable
The WireView Pro GPU is an advanced device for measuring and monitoring the power consumption of graphics cards. Developed in collaboration with Jon "elmor" Sandström, the WireView Pro GPU connects to the graphics card's 12VHPWR power connector and links to the power supply via the power cable. Power consumption data is shown on an OLED display. The Pro version has been improved with connector detection and temperature sensors. An integrated buzzer provides an audible warning if an adjustable temperature or current limit is exceeded, if the cable is not properly connected, or if an incorrectly specified cable is in use. OLED display Power consumption measurement Power consumption recording Internal temperature sensors at the power connectors External temperature sensors Pin detection for sensor-pin connectors Alarm function Optimized cable management The WireView Pro GPU enables the measurement and monitoring of power consumption from graphics cards via the 12VHPWR power connector and records this data to determine power usage. This information can be used to calculate the operating cost of a graphics card or compare its consumption with other graphics cards. A special 60-second measurement cycle allows for a quick and convenient display of power consumption, making it especially useful for reviews. It can also be used to assess power consumption in specific scenarios or over certain periods. Additionally, it can detect power spikes that occur when using modern high-end graphics cards. The Pro version includes enhanced connector detection, temperature sensors, and an audible warning signal. The WireView Pro GPU’s connector detection identifies whether a cable specified for 150 watts, 300 watts, 450 watts, or 600 watts is being used. Please note that the WireView Pro GPU measures power consumption only through the power connector, not through the motherboard’s PCIe slot. If an incorrect cable is used or the cable is not properly connected, an audible warning will sound. Two temperature sensors located on the board at the power connectors monitor temperatures at those connectors. Up to 600 watts can pass through the connectors, potentially heating them and the surrounding board. An audible alarm will sound if the temperature exceeds an adjustable limit. Two additional temperature sensors (10K NTC) can be connected via cables; two sensors with cable lengths of 5 cm and 20 cm are included. The alarm can also be triggered if the adjustable current limit (amps) is exceeded. The WireView Pro GPU displays measured values on the OLED screen. By pressing a button, you can toggle through the displayed values. The following values may be shown: Current power consumption in watts (W) Current voltage in volts (V), current in amperes (A) Minimum and maximum power consumption in watts (W) Average power consumption over 60 seconds (RAVG in W) and total energy used (E in Wh) Measured temperatures of individual temperature sensors (°C) The WireView Pro GPU is available with the 12VHPWR 16-pin power connector (4x sensor + 12x power/ground) in "Normal" (N) and "Reverse" (R) versions: If the graphics card uses power connectors with the four sensor pins located between the PCB and the 12 power pins, the "N" version is required (PCB - 4x sensor pin - 12x power pins). If the graphics card uses power connectors with the 12 power pins located between the PCB and the four sensor pins, the "R" version is required (PCB - 12x power pins - 4x sensor pin). Note: When using the 12VHPWR adapter, ensure each of the three or four 8-pin PCIe connectors is connected to the power supply with a separate 8-pin PCIe cable. The use of splitters (Y-cables) is strongly discouraged! Warning – Important Notice: Risk of Injury! Depending on the graphics card used, especially with the GeForce RTX 4090, up to 450 watts of power can pass through the WireView connectors. This can cause the PCB at the WireView connector to heat to 60 degrees Celsius with an air-cooled card. With a water-cooled card and no airflow, the WireView PCB can heat up to 100 degrees Celsius! Do not touch the WireView casing during operation. After shutting down the system, allow the WireView to cool before handling.
Conceptronic ETTA06B15. Kaabli pikkus: 1,5 m. Pistmik 1: USB C, Pistmik 2: USB C/Micro-USB B/Lightning, USB versioon: USB 2.0, Maksimaalne andmeedastuskiirus: 0,48 Gbit/s, Toote värv: Must
Experience visual clarity and seamless connectivity with the Club 3D video adapter. Designed to meet the needs of high-definition content creators and consumers, this adapter supports 4K resolution at a smooth 60 Hz refresh rate, backed by a spectrum of color formats including RGB and YCbCr for a vivid, lifelike picture. Beyond its impressive display capabilities, it offers Multi Stream Transport (MST) and USB Power Delivery up to 100 W, allowing you to connect multiple devices and charge simultaneously without sacrificing performance. Its commitment to quality is matched by a dedication to sustainability, with packaging made from recycled materials. Whether for professional use or personal entertainment, this adapter ensures that your visual and connectivity needs are met with high standards.
USB-C 100W CableA long USB cable compliant with the Power Delivery standard that allows you to power devices with 100W, which allows you to quickly charge laptops. The 90-degree angled plug allows you to nicely route the cable along the laptop case.High quality workmanshipThanks to the braiding, the cable does not get tangled and looks very aesthetically pleasing. The 2-meter length means you don't have to place your laptop close to a power outlet.VersatileThe cable supports the data transfer and device charging function. Support for Quick Charge 3.0 and Power Deivery 3.0 technology allows you to quickly charge devices.
Baseus FastJoy 1800Mbps WiFi adapter (black).The Baseus FastJoy WiFi adapter provides exceptional data transfer speeds of up to 1800 Mbps. With support for two frequency bands - 2.4 GHz (600 Mbps) and 5.8 GHz (1200 Mbps), you can comfortably watch high-quality movies, play online games without lag and use the Internet without interference. It's ideal for demanding users looking for a reliable connection.Excellent range and adjustable antennasThe product is equipped with two 5 dBi antennas. As a result, it guarantees a wide range, so you can enjoy stable Internet throughout your home, even if the signal has to pass through several walls. In addition, the antennas are adjustable, allowing you to tilt them at any angle to get the best possible signal.Flexibility and convenienceWith the Baseus FastJoy WiFi adapter you have full freedom of placement - the long 1-meter cable allows you to place the device anywhere without any obstacles. In addition, low power consumption and low latency ensure that your connection will not only be fast, but also energy-efficient.WiFi 6 and safe to useBaseus FastJoy is compatible with the WiFi6 standard, allowing you to enjoy low latency and even faster transmission. What's more, modern encryption standards such as WPA-PSK, WPA2-PSK, WPA/WPA2-PSK and 64/128 WEP ensure the highest level of security and privacy protection.MU-MIMO, OFDMA and CCA technologyWith support for MU-MIMO technology, the Baseus FastJoy adapter allows simultaneous transmission to several devices, making it ideal for homes and offices with multiple users. But it doesn't stop there - the OFDMA solution reduces latency, which is especially useful during intense online games, ensuring a smooth and stable connection. In addition, CCA technology helps avoid interference by automatically selecting the best channel for data transmission, while TWT technology optimizes network performance and enhances security.Two modes of operationThe Baseus FastJoy can act as both a WiFi receiver and a hotspot, making it ideal for many applications. In addition, state-of-the-art chips provide better signal transmission, stable connection and low latency for a smooth Internet experience.Compatibility and stylish designThe Baseus FastJoy WiFi adapter is compatible with Windows 10 and 11, making it ideal for work, gaming and more. What's more, the sleek design makes the device blend in seamlessly with any interior, while the blue light indicator provides information on the status of its operation. ManufacturerBaseusNameFastJoy WiFi Adapter 1800Mbps (External Antenna)ModelB01317600111-06ColorBlackMaterialPC + ABSWeightApprox. 100 gOperating frequency bands2.4 GHz and 5.8 GHzTransmission speed2.4 GHz: 600 Mbps; 5.8 GHz: 1200 Mbps;Wireless communication standardsIEEE 802.11 b/g/n, IEEE 802.11 a/acEncryption standardsWPA-PSK, WPA2-PSK, WPA/WPA2-PSK, 64/128 WEPOperation modeNIC and hotspotCompatible operating systemsWindows 10 / 11
The USB-C hub supports the modern USB 3.1 Gen2 standard and allows you to connect up to 7 devices. Of course, you can also connect and use devices of older USB generations. This practical and noble-looking hub with its aluminum design is a real eye-catcher on each desk. Easy connection via Plug & Play. USB 3.1 Gen2 transfer rates of up to 10 Gbps.
Does your smartphone or tablet no longer have a normal 3.5 mm jack output for your headphones, but only has a USB-C port? Then the DAC adapter from LogiLink is just the right solution for you: simply plug the UA0424 into the USB-C port and the jack plug of your headphones into the adapter. You can then use it without any problems and also have improved sound thanks to DAC and PCM/DSD decoding, which simply makes your music sound even better. With the built-in equaliser, you can adjust the sound to your personal preferences.
The Lindy USB extension cable offers reliable connectivity with robust construction designed for optimal performance. Compliant with USB 3.2 standards, this active cable supports data transfer rates of up to 5 Gbps, making it suitable for various high-speed applications. Its slim design ensures easy handling and installation, while the PVC housing and tinned copper conductors provide durability and resistance against wear and tear. With gold plated pins and nickel plated connectors, this cable minimizes signal loss, ensuring efficient data transmission. Operating within a temperature range of 0°C to 40°C, it is tailored for home and office environments. The cable features a minimum bend radius of 80 mm, which prevents damage from twisting and bending. This USB extension cable is a functional and dependable solution for extending your connection without compromising quality.
This USB hub is more than just a simple splitter. With its individually switchable ports and a multitude of protective features, it offers you maximum control and security. Thanks to the USB 3.2 Gen 1 data ports, you can enjoy lightning-fast data transfer speeds of up to 5 Gbit/s. Perfect for large files, high-resolution videos, and demanding applications. Additionally, each port is equipped with its own on/off switch. This allows you to selectively activate or deactivate individual devices without affecting others. The LED indicator shows you the status of each port at a glance. The included 5 V/3.5 A (17.5 W) power adapter ensures a stable power supply even for demanding devices.
Enable immersive viewing experiences and take back your desk space. Our best-selling HX Monitor Arm with a heavy-duty tilt pivot gives gamers and office professionals the freedom to move and position ultra-wide curved displays.PRODUCT FEATURESAll-in-one solution - сombines a strong monitor arm and heavy-duty tilt pivotSturdy fit - Tilts +15/-5° to work or play comfortably Protect your investment - Quality design securely supports large monitors G9 compatible - Works with 1000R curved monitors, like the Samsung 49" Odyssey G9Reclaim space - Replaces bulky monitor bases and lifts screens above the desktop Simple adjustment - Enables precise screen positioning with patented Constant Force Technology
