Elegant, slim enclosure is made of high quality plastic. Uniform appearance of all detectors installed in the premises makes it difficult for an intruder to identify the specific model used in the system because all of them look the same. - compliance with EN 50131 Grade 3 - configuring operating parameters: buttons and keyfob - end-of-line resistors - 1.1 k? - end-of-line resistors - 4.7 k?, 5.6 k? - plug-in terminal block - electronics board protecting cover - number of available LED indicator colors: 7 - active IR anti-masking - creep zone protection Detector Type Motion Detection technology PIR, Detecting area 20 m x 24 m Alarm output 40 mA / 24 V DC, Maximum current 85 mA Operating temperature range -10°C...+55°C, Power supply requirements 12 V DC Dimensions 62 x 137 x 42 mm
Detector Type Fire/Special|Operating temperature range -10 C+55 C|Power supply requirements 12 V DC|Current drain 24 mA|Dimensions 108 x 61 mm Detector Type Fire/Special Operating temperature range -10 C+55 C Power supply requirements 12 V DC Current drain 24 mA Dimensions 108 x 61 mm Shipping box quantity 1 Unit Brutto Volume 0,001008 cubm Unit Net Weight 0,164 kg Unit Gross Weight 0,2 kg
Elegant, slim enclosure is made of high quality plastic. Uniform appearance of all detectors installed in the premises makes it difficult for an intruder to identify the specific model used in the system because all of them look the same. compliance with EN 50131 Grade 3 configuring operating parameters: buttons and keyfob end-of-line resistors - 1.1 k? end-of-line resistors - 4.7 k?, 5.6 k? plug-in terminal block electronics board protecting cover 7 available LED indicator colors active IR anti-masking creep zone protection Detector Type Motion Detection technology PIR, Detecting area 20 m x 24 m, 90° Operating temperature range -10°C...+55°C, Power supply requirements 12 V DC Dimensions 62 x 137 x 42mm
Fire is one of the biggest and most common hazards in typical households. Its occurrence can be the result of human action, but also of an independent factor such as a short circuit in the electrical system, etc. A fire can have serious consequences, resulting in property damage, loss of health and, in the worst case, even death. The simplest way to protect against fire is to use certified smoke detectors that provide full protection and, in the event of an alarm, give you the chance to take action and possibly evacuate. The FireAngel FA6115 smoke detector has been developed for effective protection against the risks and consequences of fire.In the event of smoke in a room, the FireAngel FA6115 will inform users with a clear optical signal and a loud 85 dB audible alarm. The built-in self-monitoring system continuously checks for correct operation and, if necessary, will signal if the device is not working correctly. Independently, the user can test the sensor himself using the large TEST/RESET button in the centre of the housing. The included AA-type batteries last a long time and, if they are low, the self-monitoring system will signal that they need to be replaced. Once the 10-year lifespan has elapsed, the unit will indicate that a replacement is required. A major advantage of the FA6115 sensor is that it is quick and easy to mount to the ceiling, via the included mounting studs.
Wireless fire detector with smoke and temperature sensors. Built-in non-replaceable lithium batteries, up to 10 years of battery life. FireProtect 2 is a next-gen device designed for instant fire detection. The unique smoke chamber does not require regular cleaning, the dual-spectrum sensor distinguishes smoke from steam, the thermistor quickly reacts to the synthetic materials burning, and sophisticated software minimizes false alarms. Everything meets the most modern fire safety standards. Thought-out design, mounting, and the in-app settings make installation straightforward and quick. Detector Type Fire Wireless, Operating temperature range 0°C to +50°C Power supply requirements 2 non-replaceable lithium batteries, Colour White Dimensions 123.7 × 123.7 × 44.7 mm
Carbon monoxide detector•digital signal analysis•optical and acoustical indication of threshold concentration detection•low current consumption•full autodiagnostics•red LED indicator
Suitsuanduri olemasolu on Eesti kodudes kohustuslik! Suitsuandur peab olema paigaldatud iga elamu või korteri vähemalt ühte ruumi. Tänu integreeritud liitiumakule kestab suitsuandur kuni 10 aastat. Kaasas juhised paigaldamiseks. Lihtne paigaldada Ei vaja kaableid Korpusel LED-indikaator Integreeritud liitiumaku Testitud vastavalt standardile EN14604
Carbon monoxide is a toxic gas, which is produced during the combustion process and is easily absorbed into the bloodstream when inhaled. Dangerous concentrations of carbon monoxide can permanently damage the body and, in the worst case, can even lead to death. The greatest danger exists in places with poorly functioning ventilation, where the amount of air needed for the combustion process is too low. Carbon monoxide can be produced in rooms equipped with heating appliances, such as gas heaters, fireplaces, gas, oil and coal boilers, etc. There are several thousand carbon monoxide-related accidents in Poland every year. The FireAngel FA3820, a carbon monoxide detector, is equipped with the latest electrochemical sensor, which was developed at the PACE-Sensor plant in Canada, part of the FireAngel concern. When even a small amount of carbon monoxide is present, the detector will inform users with a clear optical signal and a loud 85 dB audible alarm - already audible at a distance of 1 m. The built-in self-monitoring system continuously checks the operation of the unit and, if necessary, will signal if the unit is not working correctly. Independently, the user can test the sensor himself using the large TEST/RESET button, which also allows the alarm to be silenced if necessary. The sensor has a built-in 10-year lithium battery, which does not need to be replaced or recharged for the entire operating period. The unit will start notifying the user of the end of life 30 days before it is fully discharged. The FireAngel FA3820 carbon monoxide detector comes with a 10-year warranty. The FireAngel FA3820 carbon monoxide detector meets the highest safety requirements, as evidenced by the EN50291-1:2018 and EN50291-2:2019 certificates of compliance. The FireAngel FA3820 detector is one of the few on the market that also meets the requirements of the latest Polish building products regulations, as evidenced by the Building Mark B. Plastic. Fire-resistant ABS.
- Split-spectrum sensor technology - Test and hush features in one single button - Loud sound output over 85 dB(A) at 3 meters - Low quiescent current consumption - Surface-mount device (SMD) circuit board design - Low battery warning signal - Battery Life: 10 year, 3V CR123A lithium battery (replaceable) - TÜV and CE listed, EN 14604:2005+AC:2008 Detector Type Fire Operating temperature range -10°C to +55°C, Power supply requirements 3V CR123A lithium battery (replaceable) Colour White, Dimensions φ98 mm × H43.1 mm
Elegant, slim enclosure is made of high quality plastic. Uniform appearance of all detectors installed in the premises makes it difficult for an intruder to identify the specific model used in the system because all of them look the same. compliance with EN 50131 Grade 2 configuring operating parameters: potentiometers end-of-line resistors - 1.1 k? 4 available LED indicator colors pet immunity function up to 20 Kg Detector Type Motion Detection technology PIR, Detecting area 12 m x 13 m, 90° Operating temperature range -10°C...+55°C, Power supply requirements 12 V DC Dimensions 62 x 137 x 42mm
The intelligent and precise smoke detector will take care of your and your family´s safety. When the alarm detects smoke, it will automatically sound a warning tone. If, on the other hand, you are using several alarms at the same time, all you need to do is let one of them catch smoke and all the available devices will activate. In addition to smoke detection, it can also detect overheating, and thanks to its compatibility with the HUB, available for purchase separately, you can combine the device into a single system. A dedicated Meross app or Apple Home app allows you to control the sensors and receive alerts in case of an emergency. The sensor is CE EN14604 worthy, making it a fully safe tool for you and your family. The volume level is 85dB, which will not cause hearing damage. In addition, if you have more alarms and only one of them detects smoke, the rest will also sound. You will also be notified of the threat through the app. You don´t have to worry about the sensor draining quickly. The entire device requires only 2 AA batteries, which are readily available in case you need to replace them. The only thing the sensor requires from you is a memory to know when you last replaced the batteries. A spare set is included. The device uses special apps - Meross or Apple Home. With the help of which, you can control up to 16-devices, set triggers to control other Meross devices, or receive alerts when an emergency happens. The hardware is compatible with SmartThings and works with Apple HomeKit. You can also combine the device into a single system thanks to the available HUB, which allows you to connect 16 devices simultaneously. This will give you control and security over your entire home. That´s not the end of the GS559AH´s advantages, the device will also detect overheating and effectively inform you about it. When the temperature exceeds 54 - 70 ℃, the Meross smoke detector will trigger an alarm signal. You will not be threatened by anything! Included: Alarm 2 × expansion bolt 2 × AA 1.5 V batteries power adapter USB cable smart hub CE DOC
Detector Type Fire|Wireless|Current drain 20 mA|Dimensions 108 x 61 mm Current drain 20 mA Dimensions 108 x 61 mm Brown box quantity 1 Unit Brutto Volume 0,001008 cubm Unit Net Weight 0,17 kg Unit Gross Weight 0,217 kg
Netatmo tark vingugaasiandur aitab kaitsta Sinu kodu ning selle elanikke. Kui seade tuvastab muidu märkamatu vingugaasi, siis saadab ta reaalajas Sinu nutitelefonile selle kohta ohusignaali. See võib päästa Sinu või Su lähedase elu! Anduril on sisseehitatud alarm (85 db sireen), 10 aastane aku vastupidavus ja LED indikaator. Suitsuandur toetab 2,4 Ghz WiFi ja Bluetooth Low Energy (BLE) tehnoloogiat. Netatmo toetab Apple HomeKit!
The compact and slim enclosures of the AGATE curtain detector contain advanced technological solutions which enable a virtual wall to be created both outside of the protected buildings as well as in their interiors. Design of the AGATE detector meets the EN 50131-2-4 standard requirements for Grade 3. Therefore, the device can be used to secure the premises particularly vulnerable to burglary, which require a high degree of protection, including the jewelry shops and interiors of public buildings. Detector Type Motion Detection technology Dual-tech
Independent, remote controlled smoke detector, fotoelectric, with extremely loud sirene and built-in 3 V battery - product life 10 years. Features:- simple installation- without cable- easy-press-button- silent standby- photoelectric detection- warning sound 85 dB Type of Sensor photo optical Low Battery Warning Visual / Audible Volume (dB) 85 Wall Mount Included Colour White Dimensions (mm) 115 x 45 Weight (g) 180 Product Type Smoke Detector
- 2-YEAR BATTERY LIFE: One battery provides monitoring for 730 days. - FOR DOORS AND WINDOWS: Small and compact design fits onto any door or window frame. - 100-DECIBEL SIREN: If a forced entry is detected, a siren as loud as a jackhammer will be triggered on HomeBase, and you’ll be notified instantly on your smartphone. - EASY INSTALLATION: Just peel off the mounting tape and stick the sensor onto the door or window you want to monitor. Detector Type Magnetic contact Colour White
Elegant, slim enclosure is made of high quality plastic. Uniform appearance of all detectors installed in the premises makes it difficult for an intruder to identify the specific model used in the system because all of them look the same. compliance with EN 50131 Grade 2 configuring operating parameters: potentiometers end-of-line resistors - 1.1 k? 4 available LED indicator colors Detector Type Motion Detection technology PIR, Detecting area 15 m x 20 m, 90° Operating temperature range -10°C...+55°C, Power supply requirements 12 V DC Dimensions 62 x 137 x 42mm
