K7CO carbon monoxide sensor equipped with a Kidde electrochemical sensor, guaranteeing 10 years of operation. Battery power supply allows the detector to be mounted in an optimal place in the room and provides protection also in the event of a power failure in the network. Exceeding the permissible CO level is signaled optically (red LED) and acoustically (loud, pulsating sound alarm with a strength of 85dB). The device's memory stores information about the detection of CO concentration exceeding the level of 100 PPM. Thanks to this, the user can make sure that there is no emission of carbon monoxide during his absence in the room. The sensor has a test / reset button that allows you to check the operation of the device and reset the alarm signal. The efficiency control system monitors on an ongoing basis, among others: the sensor, internal circuits and the state of the battery. In the event of a malfunction or low battery level, the yellow LED flashes and an audible warning sounds. In addition, the sensor is equipped with a function that allows you to quickly check the correct response of the sensor to the CO test gas. Thanks to the special shock-resistant design, the detector has been approved for use not only in houses and apartments, but also in caravans, motorhomes and boats. After 10 years from the activation of the power supply, the sensor will remind you to replace the device. K7CO is marked with the B building mark confirming compliance with the Polish standard PN-EN 50291-1: 2018 + AC 2021 for home carbon monoxide detectors. The research was carried out by the Scientific and Research Center for Fire Protection, National Research Institute. Józef Tuliszkowski (CNBOP-PIB) and has a BSI certificate confirming compliance with the requirements of BS EN 50291-1: 2018 issued by the British Standards Institution (BSI). In addition, the K7CO sensor is certified to meet the requirements of BS EN 50291-2: 2019 (PN-EN 50291-2: 2020) and allows the device to be used in camping vehicles and boats. Compliance with the above-mentioned standard has been confirmed by an independent research unit of the British Standards Institution.
Volume: 85 Environment requirements: - Temp. -10 ° C ~ 50 ° C Dimensions: 107 x 35 mm Other features: - Sensor: photoelectric- Sensor life: 10 years- Power consumption (standby): 8μA- Current (alarm): 10mA
Kupu suitsuandur on sile, elegantne, loomupärane. Tekstiilist kate annab sooja välimuse. Kogu anduri pind toimib lülitina, mida vajutades on võimalik andurit testida ning valehäireid vaigistada. Värvus roosa. Paigaldamine võtab tänu 3M-kleeplindi kasutamisele vaid mõned sekundid, kruvide ja elektritrelli kasutamine pole vajalik. Mõõdud 110x110x39 mm. Kaal 200g. Töötemperatuur 0-45°C. Töökeskkonna niiskusprotsent 0-90%. Suitsuandur kasutab 3xCR2450 patareisid, eluiga kuni 5 aastat.
Narrow beam indoor motion detector. Protects windows, doors, and valuables. With the MotionProtect Curtain detectors, you can secure the perimeter of your house and freely move indoors. If a stranger breaks in, the system will raise an alarm and call the security company. - Detects motion with a range of up to 15 meters - Works up to 3 years on the pre-installed battery - Transmits alarms at a distance of up to 1,700 meters away from the hub Detector Type Motion Detection technology PIR, Detecting area up to 15 meters Wireless, Operating temperature range −10°С to +40°С Colour Black, Included Accessories SmartBracket mounting panel,CR123A batteries (pre-installed),Bracket,Installation kit,User’s guide. Dimensions 134 × 44 × 34 mm
Wireless fire detector with temperature sensor that monitors security in the room twenty four hours a day and immediately notifies of smoke and sharp jumps in temperature. - Registers smoke and sharp jumps in temperature in the room - Can operate independently from Ajax Hub, notifying of danger by means of a built-in siren - Independently tests the smoke chamber and gives prompt notification of the need to dust Detector Type Fire Wireless, Power supply requirements Battery: Two CR2 batteries, 3 V Colour White, Dimensions 132 × 132 × 31 mm
Wireless opening detector that notifies of first signs of room intrusion by means of a broken door or window. It can be mounted on all types of doors including a metal base. - Operates up to 7 years without battery replacement - External contact is available for connecting third-party detectors - Includes magnets of various sizes for installation on narrow frames and door frames Detector Type Motion Wireless, Power supply requirements Battery: CR123A battery, 3 V Colour Black
- Signal strength detection. - Low battery alarm. - Temperature measurement. - Frequency hopping function and two-way communication technology ensure communication stability. - Cloud update and automatic recovery from update failure. - Carrier Frequency: 868.0 MHz–868.6 MHz - Communication Distance: Up to 1200 m in an open space, Two-way - Encryption Mode: AES128 - Power Supply: CR123A battery - Battery Life: 5 year - Operating Temperature: –10 °C to +55 °C - Product Dimensions: 100.2mm × 20.8mm × 20.3mm - Temperature Measuring Range: –15 °C to +65 °C - Reed Switch, Non-metal doors, Movement Distance Detector Type Magnetic contact Detection technology Magnetic, Wireless Operating temperature range –10 °C to +55 °C, Colour White Dimensions 100.2mm × 20.8mm × 20.3mm
