Elegant, slim enclosure is made of high quality plastic. Uniform appearance of all detectors installed in the premises makes it difficult for an intruder to identify the specific model used in the system because all of them look the same. Models marked as LUNA come with additional built-in white LEDs. Consequently, these detectors can be used e.g. as motion responsive corridor lighting that can also work in the event of a power outage in the network. Lighting function can be controlled remotely or activated for a specified time when motion is detected. compliance with EN 50131 Grade 2 configuring operating parameters: buttons and keyfob end-of-line resistors - 1.1 k? end-of-line resistors - 4.7 k?, 5.6 k? plug-in terminal block electronics board protecting cover 7 available LED indicator colors creep zone protection built-in LED lighting Detector Type Motion Detection technology PIR, Detecting area 20 m x 24 m, 90° Operating temperature range -10°C...+55°C, Power supply requirements 12 V DC Dimensions 62 x 137 x 42mm
Carbon monoxide detector•digital signal analysis•optical and acoustical indication of threshold concentration detection•low current consumption•full autodiagnostics•red LED indicator
Wireless flood detector detects first signs of leakage within milliseconds. It is installed without using tools. - Raises the alarm as soon as water gets on one of the four pairs of contacts - Registers when the area dries out and cancels the alarm - The detector mounts by placing on the floor in areas of possible water inflow Detector Type Flood Wireless, Operating temperature range 0°С to +50°С Power supply requirements Battery: Two AAA batteries, 3 V, Colour Black Dimensions 56 × 56 × 14 mm
Wireless fire detector with temperature sensor that monitors security in the room twenty four hours a day and immediately notifies of smoke and sharp jumps in temperature. - Registers smoke and sharp jumps in temperature in the room - Can operate independently from Ajax Hub, notifying of danger by means of a built-in siren - Independently tests the smoke chamber and gives prompt notification of the need to dust Detector Type Fire Wireless, Power supply requirements Battery: Two CR2 batteries, 3 V Colour Black, Dimensions 132 × 132 × 31 mm
Wireless opening detector notifies of first signs of intrusion into the room through the door or window. It is installed even on roof windows which can be left open when leaving the house. - Operates up to 5 years without battery replacement - Registers change in vertical slope angle, bangs and vibration - External contact is available for connecting third-party detectors Detector Type Motion Wireless, Power supply requirements Battery: CR123A battery, 3 V Colour Black
Volume: 85 Technologies: Advanced electrochemical sensor Power supply: Integrated lithium battery with a service life of 10 years, does not need to be charged or replaced Accessories included: Operation and assembly manual manufacturer's warranty Mounting kit - pins, screws Dimensions: 13,3 x 13,3 x 4 cm Weight: 125
Volume: 85 Environment requirements: - Temp. -10 ° C ~ 50 ° C Dimensions: 107 x 35 mm Other features: - Sensor: photoelectric- Sensor life: 10 years- Power consumption (standby): 8μA- Current (alarm): 10mA
Motion detector with a photo camera to verify alarms. With MotionCam, you’ll know about the actual situation at home even before the burglars understand that they’re busted. An animated series of photos follows the instant motion alarm for an accurate situation appraisal. - Transmits a photograph in under 9 sec - Sees in the dark - Operates up to 4 years on the pre-installed batteries - Communicates at a distance of up to 1700 m from the hub Note: MotionCam detector requires Hub 2 for operation Detector Type Motion Wireless, Power supply requirements Batteries: CR123A (×2), 3 V Colour Black, Dimensions 135 × 70 × 60 mm
Narrow beam indoor motion detector. Protects windows, doors, and valuables. With the MotionProtect Curtain detectors, you can secure the perimeter of your house and freely move indoors. If a stranger breaks in, the system will raise an alarm and call the security company. - Detects motion with a range of up to 15 meters - Works up to 3 years on the pre-installed battery - Transmits alarms at a distance of up to 1,700 meters away from the hub Detector Type Motion Detection technology PIR, Detecting area up to 15 meters Wireless, Operating temperature range −10°С to +40°С Colour White, Included Accessories SmartBracket mounting panel,CR123A batteries (pre-installed),Bracket,Installation kit,User’s guide. Dimensions 134 × 44 × 34 mm
Wireless flood detector detects first signs of leakage within milliseconds. It is installed without using tools. - Raises the alarm as soon as water gets on one of the four pairs of contacts - Registers when the area dries out and cancels the alarm - The detector mounts by placing on the floor in areas of possible water inflow Detector Type Flood Wireless, Operating temperature range 0°С to +50°С Power supply requirements Battery: Two AAA batteries, 3 V, Colour White Dimensions 56 × 56 × 14 mm
Narrow beam indoor motion detector. Protects windows, doors, and valuables. With the MotionProtect Curtain detectors, you can secure the perimeter of your house and freely move indoors. If a stranger breaks in, the system will raise an alarm and call the security company. - Detects motion with a range of up to 15 meters - Works up to 3 years on the pre-installed battery - Transmits alarms at a distance of up to 1,700 meters away from the hub Detector Type Motion Detection technology PIR, Detecting area up to 15 meters Wireless, Operating temperature range −10°С to +40°С Colour Black, Included Accessories SmartBracket mounting panel,CR123A batteries (pre-installed),Bracket,Installation kit,User’s guide. Dimensions 134 × 44 × 34 mm
Wireless motion detector that notifies the owner of the first signs of home or office intrusion. The detector is fastened to the wall in front of the doors and other places likely of intruder entry. - Operates up to 5 years without battery replacement - Ignores cats and dogs with weight of up to 20 kg and height up to 50 cm - Accurately detects motion in heat conditions, even at a temperature of +40°? Detector Type Motion Detection technology PIR, Detecting area Up to 12 m Wireless, Operating temperature range -10°С to +40°С Colour Black, Included Accessories SmartBracket mounting panelCR123A battery (pre-installed),Installation set,User's guide. Dimensions 110 × 65 × 50 mm
Wireless fire detector with temperature sensor that monitors security in the room twenty four hours a day and immediately notifies of smoke and sharp jumps in temperature. - Registers smoke and sharp jumps in temperature in the room - Can operate independently from Ajax Hub, notifying of danger by means of a built-in siren - Independently tests the smoke chamber and gives prompt notification of the need to dust Detector Type Fire Wireless, Power supply requirements Battery: Two CR2 batteries, 3 V Colour White, Dimensions 132 × 132 × 31 mm
Wireless motion detector with microwave sensor that notifies the owner of first signs of home or office intrusion. Designed for rooms with air conditioners, fireplaces and where there is a likelihood of light flickering, glare and reflections. - The additional microwave sensor filters possible interference from the air conditioner and curtain movement - The device operates up to 5 years without battery replacement - Ignores pets weighing up to 20 kg and with a height up to 50 cm Detector Type Motion Detection technology PIR, Detecting area Up to 12 m Wireless, Operating temperature range -10°С to +40°С Colour White, Included Accessories SmartBracket mounting panelCR123A battery (pre-installed),Installation set,User’s guide. Dimensions 110 × 65 × 50 mm
Wireless opening detector notifies of first signs of intrusion into the room through the door or window. It is installed even on roof windows which can be left open when leaving the house. - Operates up to 5 years without battery replacement - Registers change in vertical slope angle, bangs and vibration - External contact is available for connecting third-party detectors Detector Type Motion Wireless, Power supply requirements Battery: CR123A battery, 3 V Colour White
