Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD Short is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. It has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD Short is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. It has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie Short has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie Short has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Vastupidava konstruktsiooniga Gitzo videopea; Kandevõime: kuni 4 kg; Ette- ja tahakallutus & panoraampööre; Pikk juhthoob pea juhtimiseks; Arca-swiss ühilduv kiirkinnitusplaat
MVKN12TWINMC statiivikomplekt koosneb Nitrotech N12 videopeast ja Manfrotto MVTTWINMC statiivist. Manfrotto Nitrotech N12 videopea Manfrotto Nitrotech N12 videopea on varustatud unikaalse sujuvalt seadistatava vasturaskuse süsteemiga. Lämmastiktäiega süsteem tagab statiivi ülemisele poolele sobiva vasturaskuse – kusjuures vasturaskus on sujuvalt seadistatav 4–12-kilogrammise tehnika jaoks. See tähendab, et statiivipead ei ole vaja valida selle järgi, kui raske on Su kaamera koos objektiiviga või arvestama teist objektiivi kasutades sellega, et vasturaskust on liiga palju või liiga vähe. Lisaks on Nitrotech N12 nii pöörates kui kallutades eraldi seadistatav ja lukustatav, tehes kaamera suunamuutused väga täpseks ja kergesti kontrollitavaks. Nitrotech N12 videopeal on kaks 3/8" kinnituspesa – ühte saab kinnitada statiivipea juhthoova, teist aga kasutada Easy Link ühendusena ehk kasutada näiteks videomonitori, videovalgusti või mõne muu tarviku kinnitamiseks. Kaamera kinnitamiseks on kasutusel 504PLONG tüüpi kiirkinnitusplaat, mis lihtsustab õige tasakaalupunkti saavutamist. Manfrotto MVTTWINMC statiiv MVTTWINMC kaheastmeline süsinikkiust kaksikjalgadega statiiv pakub eriti jäika ja stabiilset tuge igal ettevõtmisel. Professionaaltasemel videote tegemisel on see aga tõeline must-have. Statiivil on alumiiniumist 100 mm kauss ning ka adapter, millega kauss 75 mm peale muuta. Statiivil on kesktasandil spetsiaalne mehhanism, mis võimaldab jalgade kaldenurka täpselt seadistada. Jalgade lukustus on kindel ning turvaline ning jalgade otsas on kummikatetega piigid, mis võimaldavad statiivi mugavalt kasutada nii sise- kui välitingimustes. Süsteemi hõlpsaks kaasas kandmiseks on komplektis ka mugav kandekott.
SMALLRIG 1693 Lock HDMI Protector. A universal HDMI clamp for various camera cages. It protects your wireless HDMI transmitter connections from being bumped or broken. The HDMI clamp could be adjusted and fitted for different HDMI cable. It attaches to a cage securely using a 1/4´´-20 screw. Includes:1x HDMI Lock
SmallRig 3008 Professional Kit for Sony A7S III including Cage 2999, Cableclamp 3000 and Wooden Handgrip 2093. Cage 2999: In addition to one cold shoe mount and multiple 1/4"-20 and 3/8"-16 threaded holes, this formfitting aluminum cage features seve SMALLRIG 3008 Professional Kit for Sony A7S III including Cage 2999, Cableclamp 3000 and Wooden Handgrip 2093. Cage 2999: In addition to one cold shoe mount and multiple 1/4"-20 and 3/8"-16 threaded holes, this formfitting aluminum cage features several ARRI-style mounts for preventing accessories from twisting when mounted on the cage. The cage also incorporates an anti-twist design with an M2.5 screw fixed to the strap hole in addition to the 1/4"-20 camera mounting screw so your camera can´t move around in the cage. You can attach SmallRig Top Handle 1984 or SmallRig Wooden Side Handle 2093 for hand-held shooting, and SmallRig Cable Clamp 3000 to protect the HDMI cable and port. ARRI-style mounts on the top and side are provided to attach SmallRig ARRI Locating Handle 2165 or SmallRig Ball Head Magic Arm 2115. It also comes with a built-in NATO rail on the left of the cage. Mounting holes on the front allow mounting a separately available SmallRig lens adapter 2219 or 1764. Strap holes are included to add a separately available wrist strap 2456，2398 or neck strap 2428 to your rig. Besides, a screwdriver is built into the bottom of the cage for tightening the camera screws. Cable Clamp 3000: This clamp attaches to the side of the cage using a 1/4"-20 screw and two anti-twist pins. The easy-to-grasp knurled 1/4"-20 screw adjusts a sliding block that can be tightened to accommodate HDMI cable of varying diameters. This Cable Clamp is constructed of a sturdy aluminum alloy and comes with an Allen wrench. Handgrip 2093: It is locked via two thumb screws and fits any cage featuring two 1/4"-20 threaded holes with 18mm distance on the side. The ergonomic side handle can be attached to left or right side by loosing the two scre
1. Formfitting full Cage for Nikon Z5/Z6/Z7/Z6II/Z7II Camera 2. Multiple 1/4"-20 & ARRI 3/8"-16 Accessory Threads 3. Integrated Cold Shoe & NATO Rail 4. Locks Camera via 1/4"-20 & M2.5 Screw to Prevent Twisting 5. Built-In Flat Head Screwdriver with Allen Wrench on the Bottom 6. Fits any cage featuring Nato Rail on each side.
Crane M3 Combo Kit contains: CRANE-M3 / Tripod Plus / Cell Phone Mount / TransMount EasyGo Backpack Whether you are shooting with a smartphone, action camera or a compact mirrorless - the Crane M3 is the gimbal for you. Functions like improved grip, a new quick release, bigger screen and the possibility to connect a microphone to the gimbal are just a few of the new exciting features we´ll find on the new gimbal from Zhiyun. On the back of the M3 we find a new 1.22” OLED touch screen with a new easy-to-navigate and intuitive design. Through the screen you can control all the gimbal´s important functions such as operating mode, engine power etc. With gimbal you can also change the camera´s settings by connecting it either with a cord or via Bluetooth. Below the screen is a joystick that can either help you navigate the menus or smoothly control one of the gimbal´s three axes. At the top of the gimbal, we find three powerful engines that can handle up to 90% of all mirrorless cameras on the market. The camera can easily be attached to the gimbal with a newly designed quick release plate that allows you to change battery on the camera without rebalancing. Another exciting feature is a new built-in 800-lumen LED on the top side of the gimbal, colour temperature levels can be set between 3000-5400K. The LED also has the ability connect magnetic light filters that comes in four different colors. With the new Crane M3 comes the TransMount Expansion Base. A module (optional, included in Crane M3 pro package) that allows professional microphones to be directly connected to the gimbal instead of adding extra weight to the camera. Battery life is 8 hours and charging time only 2 hours. The gimbal can easily be powered via a powerbank and supports fast 25W PD charging. The M3 features innovative locks and latches for storage. Gimbal can be adjusted to half-storage/full-storage mode. No axis arm adjustments are required when switching to half-storage mode with a mounted camera, and no rebalances needed when expanded.
Gitzo GH2750 on läbinud täieliku disainiuuenduse, mille tulemiks on parem kandevõime ning kergem kaal. Lisaks on sel uuendatud panoraampöörde lukustus, mis on kolm korda tugevam eelmisest versioonist. Kuuli lukustus on samamoodi uuendatud ning kombineerib endas kahte lukustust.
Systematic statiivid on Gitzo statiivide seas ühed tugevaimad, kuid pakuvad samas ka ületamatut paindlikkust. Nende modulaarset süsteemi saab kiiresti oma vajadustest lähtudes muuta – näiteks saab sellele hiljem lisada vastavalt vajadusele sobiva kesksamba. Süsinikkiust torudega statiiv on suurepärane baasmudel pildistamiseks nii sise- kui välitingimustes. Uue põlvkonna Systematic statiividel on Gitzo Carbon eXact süsinikkiust torud, uued stabiilsemad statiivijalad ning Easy Link kinnitussüsteem. Tänu nendele innovatsioonidele on statiiv kergem, kiiremini käsitsetav ning toekam kui kunagi varem. Systematic Series 5 statiiv on suurepärane valik professionaalse varustuse jaoks, kuna see on stabiilne ka kuni 40 kg koormuse all.
BIG T-1271 on kolmesuunalise pea ja kiirkinnitusplaadiga universaalne statiiv, mis ei löö eelarvet lõhki. Kiirklambritega kinnitatavad jalad võimaldavad statiivi kiirelt üles seada ning lisaraskuse konks kesksamba otsas lisab statiivile stabiilsust.
Caruba Flexstar25 ministatiiv on paindlik ja kompaktne statiiv, mis sobib ideaalselt kompaktkaamera või seikluskaameraga kasutamiseks. Statiivi paindlikke jalgu on lihtne painutada, nii et saad statiivi näiteks toru, puuoksa vm ümber mässida. Tänu painduvatele jalgadele saab seda kasutada ka ebatasastel pindadel. Statiivi kummist jalaotsad tagavad, et see püsib ka libedal pinnal kindlalt paigal. Statiivijalgu ümbritsev vahtkummist polsterdus kaitseb nii jalgu kui ka kaamerat, kui see kaameraga kokku puutub. Flexstar25-l on varustatud nii 1/4" kui ka 3/8" kinnitusega, nii et seda saab kasutada pea iga kaameraga. Paindlik ja kompaktne statiiv Sobib kompaktkaamera ja seikluskaameraga kasutamiseks Paindlikud jalad Kummist libisemisvastased jalaotsad Kriime ennetav vahtkummist polsterdus 1/4" ja 3/8" kinnitus
Värskenda oma GorillaPod 5K statiivipead selle Arca-Swiss süsteemiga ühilduva kiirkinnitusplaadiga. GorillaPod 5K kuulpeale loodud kiirkinnitusplaat sobib peegel- ja hübriidkaameratega kasutamiseks. Kandevõime kuni 5 kg Arca-Swiss süsteemiga ühilduv Kerge, ent vastupidav disain Sobib ka GorillaPod Focus statiivile
HandyPod Mobile Plus on ideaalne nutitelefoniga pildistamiseks ja videote tegemiseks. Tänu kergele ja kompaktsele disainile on seda mugav kaasas kanda. Soovid HandyPod'i kasutada hoopis käepidemena vlogimiseks? Lihtsalt lükka statiivijalad kokku ning asu filmima. Statiivijalad on kaetud kummeeritud kihiga, mis teeb selle käsitsemise turvalisemaks. HandyPod Mobile Plus on varustatud Joby GripTight One telefoniadapteriga, mis mahutab enamik nutitelefone. Kui adapter aga eemaldada, saab statiivi universaalset 1/4" kinnitust kasutada ka kergema kaamera, mikrofoni, valgusti või muu seadme kinnitamiseks. Statiiv sobib kuni 1 kg seadmega kasutamiseks. Komplekti kuulub ka Joby Impulse Bluetooth kaugjuhtimispult iPhone ja Android telefonidele. Tänu puldile saad teha ägedaid selfisid, kaasata end grupipiltidesse ning püüda huvitavaid võttenurki. Ministatiiv ja käepide ühes Komplektis Joby GripTight One telefoniadapter Joby Impulse Bluetooth kaugjuhtimispult Ergonoomiline kummeeritud pealispind Lihtne mehhanism portreeasendis kasutamiseks Kerge ja mugav kaasas kanda
Manfrotto 625 kiirkinnitusadapter koos plaadiga on mõeldud üksjalgadele ning statiivipeadele, millel puudub kiirkinnitussüsteem. See sobib 1/4" või 3/8" keermega üksjalgadele ning statiivipeadele. 625 kiirkinnitusadapteriga on kaasas ka kiirkinnitusplaat, sellel on kaks integreeritud loodi ning kaamera kinnitub adapterile 1/4" keermega. Kiirkinnitusplaadi mudel: Manfrotto 030-14
See kerge videokomplekt koosneb 635 süsinikstatiivist ning ülisujuvast 504X videopeast. Videopea sobib suurepäraselt kasutamiseks ka peegelkaameratega filmimise ajal. 504X videopeal on kuni 6,5 kg vasturaskus, kuid sobib kasutamiseks seadmetega, mille raskus on kuni 12 kg. Lisaks on videopeal ka Easy Link 3/8" ühendus, mis võimaldab kinnitada välise videovalgusti või monitori mugavalt statiivi külge. Manfrotto 635 statiivil on kiirkinnitusega jalad, kus piisab ühe lukusti lahti keeramisest, et saaks muuta terve jala kõrgust. Statiivil on alumiiniumist 75 mm kauss ning ka adapter, millega kauss 60 mm peale muuta. Statiivil spetsiaalne mehhanism, mis võimaldab jalgade kaldenurka täpselt seadistada. Jalgade lukustus on kindel ning turvaline ning jalgade otsas on kummikatetega piigid, mis võimaldavad statiivi mugavalt kasutada nii sise- kui välitingimustes.
See kerge videokomplekt koosneb 536 CF süsinikstatiivist ning ülisujuvast 504X videopeast. Videopea sobib suurepäraselt kasutamiseks ka peegelkaameratega filmimise ajal. 504X videopeal on kuni 6,5 kg vasturaskus, kuid sobib kasutamiseks seadmetega, mille raskus on kuni 12 kg. Lisaks on videopeal ka Easy Link 3/8" ühendus, mis võimaldab kinnitada välise videovalgusti või monitori mugavalt statiivi külge.
Designed to provide the handheld solution, accessory attachment, and protection for the camera, and particularly during low-angle shooting, ease burdens on the arm and assist in camera movements. The kit comes with a Cage for Nikon Z9 (3195) and an ARRI Top Handle (2165) and maintains access to buttons, holes, card slots, battery door, and flip screen after installation. SmallRig 3738 Cage Kit For Nikon Z9 The cage is locked via a 1/4´´-20 screw at the bottom, locating pin and the shoulder strap ring on the right side. The top handle is ergonomically designed to increase comfort and allows quick assembly and disassembly. Built-in mounting points are fully compatible with the SmallRig accessory system. Featuring 1/4´´-20 threaded holes and ARRI 3/8"-16 locating holes for SmallRig Side Handle 2093 or 2426 for side handheld shooting and camera movements, and ARRI 3/8"-16 locating hole on the top of the handle for Monitor Mount 2903 and a cold shoe mount for microphones, LED lights. Arca quick release plate on the bottom of the cage fits directly on to a tripod for tripod shooting. Two 1/4´´-20 threaded holes at the bottom of the front, support SmallRig Rod Clamp 942 for attach 15mm rail support system to attach lens support, follow focus, matte box, etc. Besides, comes with protective cushions inside to prevent scratches and provides a built-in magnetic spanner for easy access. Compatibility: Nikon Z9 Note: Please remove the shoulder strap ring on the right side before attaching the cage. The cage is not compatible with Nikon WR-R11 remote controller. Package Includes: 1 x Cage 3195 8 x M3 Screw 1 x Top Handle 2165
Designed for quick switch between horizontal and vertical shooting. SmallRig 3714 L-Bracket For Nikon Z9 It is locked into the bottom of a camera via a 1/4"-20 screw and an anti-twist screw, fitted with a silicone pad to prevent scratches and deflection, and can be disassembled into an Arca-compatible base plate (used separately) and side plate, both with lens center mark. The L-Bracket does not block ports, buttons, card slot, battery door, and 4-axis tilting LCD screen. The base plate features mounting points such as 1/4”-20, 3/8"-16 threaded holes and wrist strap support to attach SmallRig Quick Release Plate 1280 and the quick-release plate (pad) of DJI RS 2/RSC 2 stabilizers to realize quick switching multiple scenes such as tripod and stabilizer. Extendable side plate featuring two 1/4"-20 threaded holes supports SmallRig Cold Shoe Mount 1593 and 2736 to attach microphone and leaves room for HDMI and USB cables. In addition, a slotted screwdriver is accessible for easy disassembly and assembly. Note: To stretch the L-Bracket, you need to remove an anti-twist screw with the built-in flat-head spanner; Compatibility: Nikon Z 9 Includes: 1 x base plate 1 x side plate 2 x M4 screws 1 x Allen Wrench
Key Features: 1. Genuine leather half case with a custom fit for Nikon Z fc camera. 2. Improved grip and provide protection. 3. Fastened by a 1/4´´-20 D-ring screw without tools. 4. Features a 1/4´´-20 threaded hole on the bottom that allows attaching a tripod. 5. Maintains access to the battery door, card slot, and flip screen. SmallRig Leather Half Case with Shoulder Strap for Nikon Z fc 3481 is designed to protect your camera from dirt, dust, and scratches. The case has a nonslip texture for an improved grip. Handcrafted with a genuine leather exterior and soft microfiber features a non-scratching interior to prevent sweat from staining the clothes. The case attaches to the bottom of the camera via a 1/4´´-20 D-ring screw, and the shoulder strap attaches to the round strap hole of the camera with the strap ring. The bottom plate features a 1/4"-20 thread for a tripod or other accessory. The case keeps access to the battery compartment, card slot and it will not influence the flip screen.
Ergonomically designed to improve grip experience, facilitate low-angle shot and reduce burdens on arms. SmallRig 3766 Nato Top Handle The ergonomic handle, featuring anti-slip and anti-freeze silicone, feels comfortable and weighs only 124g because of a hollowed-out structure. It has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories. ARRI 3/8"-16 locating holes support SmallRig Monitor Mount 2903 and 2348 to attach monitors. 1/4"-20 threaded holes support SmallRig Magic Arm 2070 for monitors and Remote Control 2924 for recording. Its quick-release NATO clamp fits all standard NATO rails. Compatibility: Any accessories features NATO Rail In the Box: 1 x Top Handle
The Konus Tripod for Binoculars is made of lightweight metal and consists of 3 adjustable sections (from 65 cm to 160 cm). The mounting plate is suitable for binoculars, spotting scopes and cameras. The ball head is equipped with ...
SIRUI P-325FS and P-325FL are advanced photo/video monopods that combine functions of monopods, monopod with feet, extension rods, and tabletop-tripods intο a whole. The innovative modular design, lightweight and flip-lock mechanism are going to provide you with more convenience and creative opportunities. Sirui Monopod P-325FL For Photo/Video The carbon fiber structure gives the P-325FL monopod a weight of only 1.2 kg, which is 20% lighter than previous models from SIRUI. Weighing about the same as a mirrorless camera, this monopod is of great portability for doing outdoor shoots. The monopod features a unique modular design; Four modules, including the mounting plate, main tube section, tripod foot, rubber foot, can be detached and combined freely to form a monopod, an extension rod, or a tabletop tripod. Quick Release System The quick release system has a distinct advantage over the locking knob system. Pull down the top/bottom quick release sleeve to detach modules in a quick and easy way. Thanks to the trigger mechanism, even a mounting plate with heavy gear attached can be inserted intο the quick release sleeves within a second. When inserted, the mounting plate will be locked securely intο place. Quick release mounting screw Press and hold the button to take out the screw. Flip the screw upside down to switch between the 1/4" and 3/8" thread. Quick release tripod base Remove the rubber foot from the tripod base and attach it to the bottom of the main tube to form an extension rod or normal monopod. 360° Panning The upper twist collar has a groove-textured surface for quick adjustment while shooting. Unlock the upper twist collar to get a full 360°panning ability. Quick Leveling Two bubble levels on the base allow you to always keep the monopod in good balance even when you are doing highly mobile outdoor shoots 36° Tilting Use the ball locking knob to adjust the friction of the ball. Loosen the ball locking knob and tilt the monopod 36° in any direction to get a lot of movements. Full-Featured Tripod Foot The tripod foot is well built with solid aluminum, offering two positions at your choice. Legs can be folded up reversely to fit intο your backpack. Rubber & Spike Foot The monopod comes with a rubber foot that can be retracted to reveal a spike. Combine functions of monopods with feet, monopod, extension rods, and tabletop-tripod: Monopod with feet Video recordings where you can move smoothly, but still with stability. Monopod Event shooting, interview shooting, high-angle shooting, places where the tripod is not an option Extension Rod Highly mobile situations, weight distribution of telephoto lenses, a telescopic stick for stabilizers or action cameras Table Tripod Low-angle shooting, desktop recording, close-up shots, vlog shooting.
SIRUI P-325FS and P-325FL are advanced photo/video monopods that combine functions of monopods, monopod with feet, extension rods, and tabletop-tripods intο a whole. The innovative modular design, lightweight and flip-lock mechanism are going to provide you with more convenience and creative opportunities. The carbon fiber structure gives the P-325FS monopod a weight of only 1.17 kg, which is 21% lighter than previous models from SIRUI. Weighing about the same as a mirrorless camera, this monopod is of great portability for doing outdoor shoots. The monopod features a unique modular design; Four modules, including the mounting plate, main tube section, tripod foot, rubber foot, can be detached and combined freely to form a monopod, an extension rod, or a tabletop tripod. Quick Release System The quick release system has a distinct advantage over the locking knob system. Pull down the top/bottom quick release sleeve to detach modules in a quick and easy way. Thanks to the trigger mechanism, even a mounting plate with heavy gear attached can be inserted intο the quick release sleeves within a second. When inserted, the mounting plate will be locked securely intο place. Quick release mounting screw Press and hold the button to take out the screw. Flip the screw upside down to switch between the 1/4" and 3/8" thread. Quick release tripod base Remove the rubber foot from the tripod base and attach it to the bottom of the main tube to form an extension rod or normal monopod. 360° Panning The upper twist collar has a groove-textured surface for quick adjustment while shooting. Unlock the upper twist collar to get a full 360°panning ability. Quick Leveling Two bubble levels on the base allow you to always keep the monopod in good balance even when you are doing highly mobile outdoor shoots 36° Tilting Use the ball locking knob to adjust the friction of the ball. Loosen the ball locking knob and tilt the monopod 36° in any direction to get a lot of movements. Full-Featured Tripod Foot The tripod foot is well built with solid aluminum, offering two positions at your choice. Legs can be folded up reversely to fit intο your backpack. Rubber & Spike Foot The monopod comes with a rubber foot that can be retracted to reveal a spike. Combine functions of monopods with feet, monopod, extension rods, and tabletop-tripod: Monopod with feet Video recordings where you can move smoothly, but still with stability. Monopod Event shooting, interview shooting, high-angle shooting, places where the tripod is not an option Extension Rod Highly mobile situations, weight distribution of telephoto lenses, a telescopic stick for stabilizers or action cameras Table Tripod Low-angle shooting, desktop recording, close-up shots, vlog shooting
A versatile shooting grip, selfie stick as well as tabletop tripod for select Sony and Canon cameras featuring Bluetooth connectivity. This grip is designed to improve shooting stability, ideal for vlogging, live streaming, simple everyday use and other scenarios. Features detachable and chargeable wireless remote control can achieve camera photo, video, zoom, focus and other functions, which makes your vlog easier. The grip is extendable with two levels stretch up to 15cm for better selfie and wider view. The integrated head can tilt upward 90°, downward 90°, and rotate 360° for easier positioning. Portable size and lightweight for easy carrying. The bottom of grip comes with a 1/4”-20 threaded hole for tripod to provide wider view and help to stand when use as a selfie stick. High-strength nylon and glass fiber make it robust and durable with a payload up to 1.5kg (0.5kg when stretched). Note: Load Capacity: 1.5kg (folded as a grip or tripod); 0.5kg (extended as a selfie stick) Please do not use the grip as a tripod when extended as selfie stick. Remote control operating range: 10 meters Compatibility: Sony Cameras ZV-1 / ZV-E10 / RX100 Ⅶ / RX0 II Alpha 6100 / Alpha 6400 / Alpha 6600 Alpha 7C / Alpha 7 III / Alpha 7 IV / Alpha 7R III / Alpha 7R IV / Alpha 7S III / Alpha 9 / Alpha 9 II Canon Cameras EOS M6 Mark II / EOS M50 / EOS M50 II / EOS M200 / EOS R / EOS R5 / EOS R6 PowerShot G5X II / G7X III (Depending on the camera, the setup method for remote control shooting may differ, please refer to the instruction manual for your camera)
Valmis kõigeks Vastupidav G-klamber keraliigend-peaga ja nelja 1/4-tollise keermega. Heavy Clamp lubab kinnitada varustust peaaegu kõikjale; kirjutuslaua, riiuli, posti või muu eseme külge. Ainult vaata ringi ning kasuta loovust.
Designed for Nikon Z 8 to assist with handheld shooting and attach accessories. It includes a cage, an HDMI & USB-C cable clamp, and a top handle. SmallRig 3941 Cage Kit For Nikon Z 8 With a 1/4"-20 threaded hole, 3/8"-16 threaded hole, ARRI 3/8"-16 locating hole, NATO rail, and cold shoe mount, the kit can mount a monitor, microphone, tripod, follow focus, handle, etc. Among its three parts, the cage locks the camera via one bottom 1/4"-20 screw, one locating pin, and one side lock adapter. The ergonomic handle facilitates shooting in motion, providing a comfortable and stable user experience. And the HDMI & USB-C cable clamp, tightened by a hand screw, ensures stable signal transmission. Besides, a magnetic double-ended wrench is included for easy disassembly and assembly. Compatibility: Nikon Z 8 Package includes: 1x Cage 1x Cable Clamp 1x Top Handle
