Walimex pro Steadycam StabyPod on suurepärane valik võtete stabiliseerimiseks, Kerge ning kompaktne carbon konstruktsioon, Kinnitustorus Follow Focus ning teiste lisade jaoks, Komplektis 2x 200g ja 4x 400g raskused, Maksimaalne ...
Systematic statiivid on Gitzo statiivide seas ühed tugevaimad, kuid pakuvad samas ka ületamatut paindlikkust. Nende modulaarset süsteemi saab kiiresti oma vajadustest lähtudes muuta – näiteks saab sellele hiljem lisada vastavalt vajadusele sobiva kesksamba. Süsinikkiust torudega statiiv on suurepärane baasmudel pildistamiseks nii sise- kui välitingimustes. Uue põlvkonna Systematic statiividel on Gitzo Carbon eXact süsinikkiust torud, uued stabiilsemad statiivijalad ning Easy Link kinnitussüsteem. Tänu nendele innovatsioonidele on statiiv kergem, kiiremini käsitsetav ning toekam kui kunagi varem.Series 3 statiivid on ideaalsed kaaslased fotograafidele, kes ei taha rasket pagasit kaasas kanda, kuid soovivad stabiilset ja usaldusväärset tuge. GT3533S mudel paistab teiste seas silma oma ülima paindlikkuse poolest: statiivi jalad suudavad asetuda lausa 23° nurga alla ning püüda võtteid vaid 9 cm kõrgusel maapinnast.
Systematic statiivid on Gitzo statiivide seas ühed tugevaimad, kuid pakuvad samas ka ületamatut paindlikkust. Nende modulaarset süsteemi saab kiiresti oma vajadustest lähtudes muuta – näiteks saab sellele hiljem lisada vastavalt vajadusele sobiva kesksamba. Süsinikkiust torudega statiiv on suurepärane baasmudel pildistamiseks nii sise- kui välitingimustes. Uue põlvkonna Systematic statiividel on Gitzo Carbon eXact süsinikkiust torud, uued stabiilsemad statiivijalad ning Easy Link kinnitussüsteem. Tänu nendele innovatsioonidele on statiiv kergem, kiiremini käsitsetav ning toekam kui kunagi varem.Series 3 statiivid on ideaalsed kaaslased fotograafidele, kes ei taha rasket pagasit kaasas kanda, kuid soovivad stabiilset ja usaldusväärset tuge. GT3533S mudel paistab teiste seas silma oma ülima paindlikkuse poolest: statiivi jalad suudavad asetuda lausa 23° nurga alla ning püüda võtteid vaid 10 cm kõrgusel maapinnast, samas ulatudes ka üle rahvamasside tänu 202 cm maksimaalsele kõrgusele.
Pisike lauastatiiv erinevateks rakendusteks. Mahub taskusse või vööl kantavasse vutlarisse ning sobib kasutamiseks praktiliselt kõikjal. Statiivil on integreeritud mini-kuulpea. Sobib kasutamiseks kompaktkaamerate ning kergete ...
Nikon Tripod Collar Ring RT-1 The RT-1 tripod collar ring enables the AF-S NIKKOR 70 200mm f/4G ED VR lens to be rotated freely through 360-degrees when attached to a camera body. The ring helps improve tripod balance and allows quick, smooth switching between vertical and horizontal orientation when shooting in portrait and landscape format. Type Tripod Mount Ring Information For optimised Handling Colour Black Weight (g) 157
The Novoflex Micro PodWeighing in at just 50 g, the Micropod is an ideal companion if you re out and about. It also scores highly in table-top photography. It s right for digital cameras and camcorders, but has no problems with supporting a heavy SLR camera. It is also perfect for positioning flash lights, video lights, microphones, etc. Together with the NOVOFLEX Neiger 19 and 19P, it s an item that should be found in any camera bag. The plug-in legs are assembled in a trice for immediate action. Folded together, the tripod turns into a small handle that can be used to stabilize the camera as you carry it. Maximum heigth: 70mmWeight: 50 g Type of Tripod Table Tripod Max. Weight Capacity (kg) 5,0 Max. Working Height (cm) 0,7 Colour Black Weight (kg) 0,050
GK3532-82QD on vastupidavaim, tugevaim ning profesionaalseim Mountaineer seeria statiivikomplekt. Komplekt koosneb Gitzo GT3532 Series 3 Mountaineer statiivist ning GH3382QD kuulpeast. Gitzo GT3532 on Mountaineer Series 3 statiiv – ideaalselt tasakaalustatud professionaalse fotograafi vajadusi silmas pidades. Standardkõrgusega statiivi kandevõime on kuni 18 kilo, sobides hästi täiskaader peegelkaamerale koos 300–400 mm teleobjektiiviga kasutamiseks. Statiivi jalad on kolmeosalised ning valmistatud Carbon eXact süsinikfiibrist torudest, tänu millele on statiivi enda kaal võrdlemisi väike. Statiivi kesksammas on eemaldatav ning pööratav. G-Lock Ultra kiirlukustid teevad jalgade pikkuse reguleerimise ülikiireks. Statiivi keskosa disain lisab jäikust ning tõstab kandevõimet. Mountainteer seeriale omaselt on kesksamba lukustus kiire ning lihtsalt kasutatav. Lisaks saab kesksammast tagurpidi keerata, et võimalikult maapinna lähedalt pildistada. Gitzo GH3382QD Series 3 kuulpea sobib GT3532 statiiviga nagu sukk ja saabas – see ei jää statiivile võimekuselt grammigi alla. GH3382QD suur kuul tagab vastupidavuse ka tõeliselt raske varustusega koostööd tehes. Kuulpeal on lai kiirkinnitusadapter, hõõrdetugevuse kontroll ning pöördelukustus. GH3382QD tagab sujuva ja hea kontrolliga käsitsetavuse ning tänu integreeritud loodile ka täpse kadreerimise.
The GorillaPod has arms! Flexible, portable and easy to use, the GorillaPod Rig is the essential tool for any content creator, vlogger or journalist creating pro-grade video.
The AirHed 360 is our flagship ball head. One of the most functional and versatile tripod heads in the world, featuring base pan, detachable, panoramic clamp, security sockets and spirit level, plus a beautifully fluid ball with powerful locking. Panoramic Clamp - At times when the user is unable to level the tripod, this useful clamp enables level panning, whatever the tripod angle.
Alan is the perfect blend of size, weight and capability. Built for versatility, adaptability, and resilience, Alan is a powerful additional to any professional photographer or filmmaker´s toolbox. With a stored height of just 450 mm, Alan is compact enough to be stored in hand-luggage. Formed from eight layers of 100% pure pre-preg carbon fibre, and aircraft grade alloys, Alan is as robust as he is light. With standard threads at both ends, Alan is highly versatile and can also be used as a camera or microphone boom. Max Height 1.49 m. Max Height with Docz2 1.53 m. Min Height 450 mm. Min Height with Docz2 505 mm. Folded Length with Docz2 505 mm. 5 Section Leg. Load Capacity - 60 kg. Monopod Weight 0.6 kg. Monopod Weight with Docz2 1.1 kg. Max Leg Tube Diameter 32 mm.
Billy is our first full carbon Punk tripod from the new range. Built for everyday use, Billy is our lightest tripod in the current line up, but built to withstand every day punishment. Take it to the bridge or anywhere else, for that matter. At just 1.38 kg, Billy is the easiest tripod to transport in our range. A tale of two heights. Topping out at 1.645 m, Billy is a tripod with a serious working height, that still extends to 1.37 m without the column installed, giving you a stable, workable solution in even the most difficult conditions. Billy, like our other Punks tripods, has one or two tricks up his sleeve. A full height detachable monopod is a sought after feature for most, but the real coup d´état is a minimum working height of just 10 cm. Billy´s legs counterfold around the column and head, enabling the user to get him down to just 46 cm. Billy, like all 3 Legged Thing tripods, comes with a detachable monopod leg that can also be used as a microphone or camera boom. Billy is capable of supporting loads up to 13 times his weight. With an 18kg payload, Billy is one of the strongest tripods in this class. Max Height 1.645 m. Max Height w/o column 1.37 m. Min Height 100 mm. Monopod Max Height 1.71 m. Folded Length 460 mm. 4 Section Legs / 1 Section Column. Load Capacity - 18 kg. Tripod Weight 1.38kg. Leg Angles 23º, 55º, 80º. Max Leg Tube Diameter 23 mm.
Corey is our entry level micro-traveler system. Featuring many of the same technologies that are found on our professional ranges, but made of durable, aircraft grade Magnesium Alloy, Corey is the perfect travel option for photographers who need their tripod to be as compact as possible. Max Height 1.5 m. Min Height 185 mm. Monopod Max Height 1.5 m. Folded Length 350 mm. Load Capacity - 14 kg. Tripod Weight 1.5kg. Built for punishing. Corey is a solid tripod, with powder-coated furniture for durability, and precision engineered mechanisms for smooth, easy use. One of a kind. Most entry-level tripods lack the features of their professional counterparts, but with Corey you get many of the features of our pro range, including the patented Tri-mount plate, detachable monopod leg and interchangeable footwear for use on any terrain. Pushing the boundaries of design. Corey is packed with small details that really define the brand. Our approach to design aesthetics is a long way left field of our competitors, and it is our unique styling that separates us from the mundane.
Suction cup for flat non-porous surfaces Ball-joint socket to move the 360o camera in different positions Dual-sided design 5/8” adapter spigot included Extremely sturdy retaining mechanism with safety pin Supports up to 2kg
The QR11 is a new evolution of universal L bracket. Designed to fit most cameras* and to enable a seamless, effortless workflow between portrait and landscape. The QR11 defies convention with it´s two colour options, and additional functionality. Available in standard size for most modern DSLRs and CSC cameras, and full-size for larger DLSRs and cameras with battery grips. With strap connectors at both the horizontal and vertical aspects, the QR11 has a variety of options for wrist, neck and sling strap compatibility. The QR11´s design enables users to disassemble, with the supplied 3LT Toolz, into two flat sections, for easier stowage in tight spaces. An additional tapped 1/4" thread in the vertical aspect enables connectivity with universal devices, like magic arms, cold and hotshoe adapters, microphones, lights and basically anything with a male 1/4" thread.
Zelda is 3LT’s first dedicated L-Bracket. Designed, in cooperation with Nikon, to perfectly fit the shapely contours of the new Z 6 and Z 7 cameras, Zelda gives users full access to all ports and doors on the cameras. Super Strength. Zelda exquisite curves are hewn with precise accuracy from a single block of solid magnesium alloy, giving it a strength never previously found in anything outside Thor’s hammer. Sharp Styling. Anodised in stunning Copper or Metallic Slate Grey, Zelda features perfectly-aligned cut-outs that give users easy access to the tilting screen and lens release buttons on the Z Series cameras. Easy as FTZ... Because Zelda was designed in collaboration with Nikon, the dedicated accessories are 100% compatible. Both the FTZ and WR-R10 can be installed and removed without the need to remove the Bracket. Horizontal Aspect Length: 106 mm. Horizontal Aspect Width: 38 mm. Vertical Aspect Height: 85 mm. Vertical Aspect Width: 38 mm. Weight: 67 g. Compatibility – Standard Arca-Swiss.
Zelda is 3LT’s first dedicated L-Bracket. Designed, in cooperation with Nikon, to perfectly fit the shapely contours of the new Z 6 and Z 7 cameras, Zelda gives users full access to all ports and doors on the cameras. Super Strength. Zelda exquisite curves are hewn with precise accuracy from a single block of solid magnesium alloy, giving it a strength never previously found in anything outside Thor’s hammer. Sharp Styling. Anodised in stunning Copper or Metallic Slate Grey, Zelda features perfectly-aligned cut-outs that give users easy access to the tilting screen and lens release buttons on the Z Series cameras. Easy as FTZ... Because Zelda was designed in collaboration with Nikon, the dedicated accessories are 100% compatible. Both the FTZ and WR-R10 can be installed and removed without the need to remove the Bracket. Horizontal Aspect Length: 106 mm. Horizontal Aspect Width: 38 mm. Vertical Aspect Height: 85 mm. Vertical Aspect Width: 38 mm. Weight: 67 g. Compatibility – Standard Arca-Swiss.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD Short is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. It has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD Short is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. It has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie Short has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie Short has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Vastupidava konstruktsiooniga Gitzo videopea; Kandevõime: kuni 4 kg; Ette- ja tahakallutus & panoraampööre; Pikk juhthoob pea juhtimiseks; Arca-swiss ühilduv kiirkinnitusplaat
Joby GorillaPod 3K Pro Kit on ideaalne kaaslane tipptaseme hübriidkaameratele. Statiivi uus disain hõlmab patenteeritud tehnoloogiat, mis tagab enneolematu vastupidavuse ja stabiilsuse, ning Arca Swiss kiirkinnitussüsteemiga kuulpead, mis võimaldab hõlpsalt ja mugavalt kadreerida. GorillaPod 3K Pro Kit sobib truuks seltsiliseks nii fotograafidele, vlogijatele kui ajakirjanikele – seda saab kasutada nii tavalise statiivi kui käsistatiivina. Statiivi painduv disain võimaldab GorillaPodi jalad mässida torude jms esemete ümber ning sättida statiiv hõlpsalt ka ebatasasele pinnale. GorillaPod 3K Pro Kit sobib kuni 3 kg kaaluvatele kaameratele. Loodud professionaaltasemel hübriidkaameratele Patenteeritud metallist kuulpesade konstruktsioon, mis on vastupidavam kui varem Arca Swiss kiirkinnitussüsteemiga kuulpea, millel on mugav ühe nupuga seadistamine ja fikseerimine Kannab kuni 3 kg suurust raskust
MVKN12TWINMC statiivikomplekt koosneb Nitrotech N12 videopeast ja Manfrotto MVTTWINMC statiivist. Manfrotto Nitrotech N12 videopea Manfrotto Nitrotech N12 videopea on varustatud unikaalse sujuvalt seadistatava vasturaskuse süsteemiga. Lämmastiktäiega süsteem tagab statiivi ülemisele poolele sobiva vasturaskuse – kusjuures vasturaskus on sujuvalt seadistatav 4–12-kilogrammise tehnika jaoks. See tähendab, et statiivipead ei ole vaja valida selle järgi, kui raske on Su kaamera koos objektiiviga või arvestama teist objektiivi kasutades sellega, et vasturaskust on liiga palju või liiga vähe. Lisaks on Nitrotech N12 nii pöörates kui kallutades eraldi seadistatav ja lukustatav, tehes kaamera suunamuutused väga täpseks ja kergesti kontrollitavaks. Nitrotech N12 videopeal on kaks 3/8" kinnituspesa – ühte saab kinnitada statiivipea juhthoova, teist aga kasutada Easy Link ühendusena ehk kasutada näiteks videomonitori, videovalgusti või mõne muu tarviku kinnitamiseks. Kaamera kinnitamiseks on kasutusel 504PLONG tüüpi kiirkinnitusplaat, mis lihtsustab õige tasakaalupunkti saavutamist. Manfrotto MVTTWINMC statiiv MVTTWINMC kaheastmeline süsinikkiust kaksikjalgadega statiiv pakub eriti jäika ja stabiilset tuge igal ettevõtmisel. Professionaaltasemel videote tegemisel on see aga tõeline must-have. Statiivil on alumiiniumist 100 mm kauss ning ka adapter, millega kauss 75 mm peale muuta. Statiivil on kesktasandil spetsiaalne mehhanism, mis võimaldab jalgade kaldenurka täpselt seadistada. Jalgade lukustus on kindel ning turvaline ning jalgade otsas on kummikatetega piigid, mis võimaldavad statiivi mugavalt kasutada nii sise- kui välitingimustes. Süsteemi hõlpsaks kaasas kandmiseks on komplektis ka mugav kandekott.
Traveller 163 Ball • Ideaalne piltide stabiliseerimiseks ebatasastel pindadel • Sobib nii foto- kui videokaameratele • 3D kuulpea lubab pildistada portree kui landscape formaadis • Kiire vabastuse plaat kaamerate kiireks vahetamiseks • Kaamera allapoole kinnitamise võimalus lubab teha makrofotosid maapinna lähedalt • Kompaktne suurus lubab seda mugavalt kaasa võtta reisile, matkale või lihtsalt väljasõidule • Valmistatud kergest kuid vastupidavast alumiiniumist • Konks statiivi küljes lubab sinna kinnitada raskusi, et saaksid seda kasutada ka tuuliste ilmadega • Lubatud suurim raskus: 4000g • Kaasas kandekott
SMALLRIG 1693 Lock HDMI Protector. A universal HDMI clamp for various camera cages. It protects your wireless HDMI transmitter connections from being bumped or broken. The HDMI clamp could be adjusted and fitted for different HDMI cable. It attaches to a cage securely using a 1/4´´-20 screw. Includes:1x HDMI Lock
SmallRig 3008 Professional Kit for Sony A7S III including Cage 2999, Cableclamp 3000 and Wooden Handgrip 2093. Cage 2999: In addition to one cold shoe mount and multiple 1/4"-20 and 3/8"-16 threaded holes, this formfitting aluminum cage features seve SMALLRIG 3008 Professional Kit for Sony A7S III including Cage 2999, Cableclamp 3000 and Wooden Handgrip 2093. Cage 2999: In addition to one cold shoe mount and multiple 1/4"-20 and 3/8"-16 threaded holes, this formfitting aluminum cage features several ARRI-style mounts for preventing accessories from twisting when mounted on the cage. The cage also incorporates an anti-twist design with an M2.5 screw fixed to the strap hole in addition to the 1/4"-20 camera mounting screw so your camera can´t move around in the cage. You can attach SmallRig Top Handle 1984 or SmallRig Wooden Side Handle 2093 for hand-held shooting, and SmallRig Cable Clamp 3000 to protect the HDMI cable and port. ARRI-style mounts on the top and side are provided to attach SmallRig ARRI Locating Handle 2165 or SmallRig Ball Head Magic Arm 2115. It also comes with a built-in NATO rail on the left of the cage. Mounting holes on the front allow mounting a separately available SmallRig lens adapter 2219 or 1764. Strap holes are included to add a separately available wrist strap 2456，2398 or neck strap 2428 to your rig. Besides, a screwdriver is built into the bottom of the cage for tightening the camera screws. Cable Clamp 3000: This clamp attaches to the side of the cage using a 1/4"-20 screw and two anti-twist pins. The easy-to-grasp knurled 1/4"-20 screw adjusts a sliding block that can be tightened to accommodate HDMI cable of varying diameters. This Cable Clamp is constructed of a sturdy aluminum alloy and comes with an Allen wrench. Handgrip 2093: It is locked via two thumb screws and fits any cage featuring two 1/4"-20 threaded holes with 18mm distance on the side. The ergonomic side handle can be attached to left or right side by loosing the two scre
