The QR11 is a new evolution of universal L bracket. Designed to fit most cameras* and to enable a seamless, effortless workflow between portrait and landscape. The QR11 defies convention with it´s two colour options, and additional functionality. Available in standard size for most modern DSLRs and CSC cameras, and full-size for larger DLSRs and cameras with battery grips. With strap connectors at both the horizontal and vertical aspects, the QR11 has a variety of options for wrist, neck and sling strap compatibility. The QR11´s design enables users to disassemble, with the supplied 3LT Toolz, into two flat sections, for easier stowage in tight spaces. An additional tapped 1/4" thread in the vertical aspect enables connectivity with universal devices, like magic arms, cold and hotshoe adapters, microphones, lights and basically anything with a male 1/4" thread.
Zelda is 3LT’s first dedicated L-Bracket. Designed, in cooperation with Nikon, to perfectly fit the shapely contours of the new Z 6 and Z 7 cameras, Zelda gives users full access to all ports and doors on the cameras. Super Strength. Zelda exquisite curves are hewn with precise accuracy from a single block of solid magnesium alloy, giving it a strength never previously found in anything outside Thor’s hammer. Sharp Styling. Anodised in stunning Copper or Metallic Slate Grey, Zelda features perfectly-aligned cut-outs that give users easy access to the tilting screen and lens release buttons on the Z Series cameras. Easy as FTZ... Because Zelda was designed in collaboration with Nikon, the dedicated accessories are 100% compatible. Both the FTZ and WR-R10 can be installed and removed without the need to remove the Bracket. Horizontal Aspect Length: 106 mm. Horizontal Aspect Width: 38 mm. Vertical Aspect Height: 85 mm. Vertical Aspect Width: 38 mm. Weight: 67 g. Compatibility – Standard Arca-Swiss.
Zelda is 3LT’s first dedicated L-Bracket. Designed, in cooperation with Nikon, to perfectly fit the shapely contours of the new Z 6 and Z 7 cameras, Zelda gives users full access to all ports and doors on the cameras. Super Strength. Zelda exquisite curves are hewn with precise accuracy from a single block of solid magnesium alloy, giving it a strength never previously found in anything outside Thor’s hammer. Sharp Styling. Anodised in stunning Copper or Metallic Slate Grey, Zelda features perfectly-aligned cut-outs that give users easy access to the tilting screen and lens release buttons on the Z Series cameras. Easy as FTZ... Because Zelda was designed in collaboration with Nikon, the dedicated accessories are 100% compatible. Both the FTZ and WR-R10 can be installed and removed without the need to remove the Bracket. Horizontal Aspect Length: 106 mm. Horizontal Aspect Width: 38 mm. Vertical Aspect Height: 85 mm. Vertical Aspect Width: 38 mm. Weight: 67 g. Compatibility – Standard Arca-Swiss.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD Short is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. It has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD Short is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. It has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie Short has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Vastupidava konstruktsiooniga Gitzo videopea; Kandevõime: kuni 4 kg; Ette- ja tahakallutus & panoraampööre; Pikk juhthoob pea juhtimiseks; Arca-swiss ühilduv kiirkinnitusplaat
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie Short has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Joby GorillaPod 3K Pro Kit on ideaalne kaaslane tipptaseme hübriidkaameratele. Statiivi uus disain hõlmab patenteeritud tehnoloogiat, mis tagab enneolematu vastupidavuse ja stabiilsuse, ning Arca Swiss kiirkinnitussüsteemiga kuulpead, mis võimaldab hõlpsalt ja mugavalt kadreerida. GorillaPod 3K Pro Kit sobib truuks seltsiliseks nii fotograafidele, vlogijatele kui ajakirjanikele – seda saab kasutada nii tavalise statiivi kui käsistatiivina. Statiivi painduv disain võimaldab GorillaPodi jalad mässida torude jms esemete ümber ning sättida statiiv hõlpsalt ka ebatasasele pinnale. GorillaPod 3K Pro Kit sobib kuni 3 kg kaaluvatele kaameratele. Loodud professionaaltasemel hübriidkaameratele Patenteeritud metallist kuulpesade konstruktsioon, mis on vastupidavam kui varem Arca Swiss kiirkinnitussüsteemiga kuulpea, millel on mugav ühe nupuga seadistamine ja fikseerimine Kannab kuni 3 kg suurust raskust
MVKN12TWINMC statiivikomplekt koosneb Nitrotech N12 videopeast ja Manfrotto MVTTWINMC statiivist. Manfrotto Nitrotech N12 videopea Manfrotto Nitrotech N12 videopea on varustatud unikaalse sujuvalt seadistatava vasturaskuse süsteemiga. Lämmastiktäiega süsteem tagab statiivi ülemisele poolele sobiva vasturaskuse – kusjuures vasturaskus on sujuvalt seadistatav 4–12-kilogrammise tehnika jaoks. See tähendab, et statiivipead ei ole vaja valida selle järgi, kui raske on Su kaamera koos objektiiviga või arvestama teist objektiivi kasutades sellega, et vasturaskust on liiga palju või liiga vähe. Lisaks on Nitrotech N12 nii pöörates kui kallutades eraldi seadistatav ja lukustatav, tehes kaamera suunamuutused väga täpseks ja kergesti kontrollitavaks. Nitrotech N12 videopeal on kaks 3/8" kinnituspesa – ühte saab kinnitada statiivipea juhthoova, teist aga kasutada Easy Link ühendusena ehk kasutada näiteks videomonitori, videovalgusti või mõne muu tarviku kinnitamiseks. Kaamera kinnitamiseks on kasutusel 504PLONG tüüpi kiirkinnitusplaat, mis lihtsustab õige tasakaalupunkti saavutamist. Manfrotto MVTTWINMC statiiv MVTTWINMC kaheastmeline süsinikkiust kaksikjalgadega statiiv pakub eriti jäika ja stabiilset tuge igal ettevõtmisel. Professionaaltasemel videote tegemisel on see aga tõeline must-have. Statiivil on alumiiniumist 100 mm kauss ning ka adapter, millega kauss 75 mm peale muuta. Statiivil on kesktasandil spetsiaalne mehhanism, mis võimaldab jalgade kaldenurka täpselt seadistada. Jalgade lukustus on kindel ning turvaline ning jalgade otsas on kummikatetega piigid, mis võimaldavad statiivi mugavalt kasutada nii sise- kui välitingimustes. Süsteemi hõlpsaks kaasas kandmiseks on komplektis ka mugav kandekott.
SmallRig Universal Cable Clamp BSC2333 Key Features: 1. Fits any accessories with 1/4”-20 threads. 2. Support 2 cables of various thicknesses of diameter 2-7mm. 3. Secures cable via thumbscrew for quick installment. 4. All screws share one hex spanner. SmallRig Universal Cable Clamp BSC2333 is designed to hold cables in place and prevents cable strain when using cameras or monitors. The clamp is attached to the camera/monitor cage or any other accessories via a 1/4”-20 screw. It’s compatible with cable diameter from 2-7mm thickness and supports 2 cables of various thicknesses the same time without using tools, such as microphone cable, power cable, HDMI and SDI cable. The thumbscrew on each side features a hex spanner hole so that you can use the hex spanner to re-tighten it. All the screws share the same hex spanner included in the package.
Gitzo GH2750 on läbinud täieliku disainiuuenduse, mille tulemiks on parem kandevõime ning kergem kaal. Lisaks on sel uuendatud panoraampöörde lukustus, mis on kolm korda tugevam eelmisest versioonist. Kuuli lukustus on samamoodi uuendatud ning kombineerib endas kahte lukustust.
BIG T-1271 on kolmesuunalise pea ja kiirkinnitusplaadiga universaalne statiiv, mis ei löö eelarvet lõhki. Kiirklambritega kinnitatavad jalad võimaldavad statiivi kiirelt üles seada ning lisaraskuse konks kesksamba otsas lisab statiivile stabiilsust.
Systematic statiivid on Gitzo statiivide seas ühed tugevaimad, kuid pakuvad samas ka ületamatut paindlikkust. Nende modulaarset süsteemi saab kiiresti oma vajadustest lähtudes muuta – näiteks saab sellele hiljem lisada vastavalt vajadusele sobiva kesksamba. Süsinikkiust torudega statiiv on suurepärane baasmudel pildistamiseks nii sise- kui välitingimustes. Uue põlvkonna Systematic statiividel on Gitzo Carbon eXact süsinikkiust torud, uued stabiilsemad statiivijalad ning Easy Link kinnitussüsteem. Tänu nendele innovatsioonidele on statiiv kergem, kiiremini käsitsetav ning toekam kui kunagi varem. Systematic Series 5 statiiv on suurepärane valik professionaalse varustuse jaoks, kuna see on stabiilne ka kuni 40 kg koormuse all.
Caruba Flexstar25 ministatiiv on paindlik ja kompaktne statiiv, mis sobib ideaalselt kompaktkaamera või seikluskaameraga kasutamiseks. Statiivi paindlikke jalgu on lihtne painutada, nii et saad statiivi näiteks toru, puuoksa vm ümber mässida. Tänu painduvatele jalgadele saab seda kasutada ka ebatasastel pindadel. Statiivi kummist jalaotsad tagavad, et see püsib ka libedal pinnal kindlalt paigal. Statiivijalgu ümbritsev vahtkummist polsterdus kaitseb nii jalgu kui ka kaamerat, kui see kaameraga kokku puutub. Flexstar25-l on varustatud nii 1/4" kui ka 3/8" kinnitusega, nii et seda saab kasutada pea iga kaameraga. Paindlik ja kompaktne statiiv Sobib kompaktkaamera ja seikluskaameraga kasutamiseks Paindlikud jalad Kummist libisemisvastased jalaotsad Kriime ennetav vahtkummist polsterdus 1/4" ja 3/8" kinnitus
Manfrotto 625 kiirkinnitusadapter koos plaadiga on mõeldud üksjalgadele ning statiivipeadele, millel puudub kiirkinnitussüsteem. See sobib 1/4" või 3/8" keermega üksjalgadele ning statiivipeadele. 625 kiirkinnitusadapteriga on kaasas ka kiirkinnitusplaat, sellel on kaks integreeritud loodi ning kaamera kinnitub adapterile 1/4" keermega. Kiirkinnitusplaadi mudel: Manfrotto 030-14
See kerge videokomplekt koosneb 536 CF süsinikstatiivist ning ülisujuvast 504X videopeast. Videopea sobib suurepäraselt kasutamiseks ka peegelkaameratega filmimise ajal. 504X videopeal on kuni 6,5 kg vasturaskus, kuid sobib kasutamiseks seadmetega, mille raskus on kuni 12 kg. Lisaks on videopeal ka Easy Link 3/8" ühendus, mis võimaldab kinnitada välise videovalgusti või monitori mugavalt statiivi külge.
See kerge videokomplekt koosneb 635 süsinikstatiivist ning ülisujuvast 504X videopeast. Videopea sobib suurepäraselt kasutamiseks ka peegelkaameratega filmimise ajal. 504X videopeal on kuni 6,5 kg vasturaskus, kuid sobib kasutamiseks seadmetega, mille raskus on kuni 12 kg. Lisaks on videopeal ka Easy Link 3/8" ühendus, mis võimaldab kinnitada välise videovalgusti või monitori mugavalt statiivi külge. Manfrotto 635 statiivil on kiirkinnitusega jalad, kus piisab ühe lukusti lahti keeramisest, et saaks muuta terve jala kõrgust. Statiivil on alumiiniumist 75 mm kauss ning ka adapter, millega kauss 60 mm peale muuta. Statiivil spetsiaalne mehhanism, mis võimaldab jalgade kaldenurka täpselt seadistada. Jalgade lukustus on kindel ning turvaline ning jalgade otsas on kummikatetega piigid, mis võimaldavad statiivi mugavalt kasutada nii sise- kui välitingimustes.
Designed to provide the handheld solution, accessory attachment, and protection for the camera, and particularly during low-angle shooting, ease burdens on the arm and assist in camera movements. The kit comes with a Cage for Nikon Z9 (3195) and an ARRI Top Handle (2165) and maintains access to buttons, holes, card slots, battery door, and flip screen after installation. SmallRig 3738 Cage Kit For Nikon Z9 The cage is locked via a 1/4´´-20 screw at the bottom, locating pin and the shoulder strap ring on the right side. The top handle is ergonomically designed to increase comfort and allows quick assembly and disassembly. Built-in mounting points are fully compatible with the SmallRig accessory system. Featuring 1/4´´-20 threaded holes and ARRI 3/8"-16 locating holes for SmallRig Side Handle 2093 or 2426 for side handheld shooting and camera movements, and ARRI 3/8"-16 locating hole on the top of the handle for Monitor Mount 2903 and a cold shoe mount for microphones, LED lights. Arca quick release plate on the bottom of the cage fits directly on to a tripod for tripod shooting. Two 1/4´´-20 threaded holes at the bottom of the front, support SmallRig Rod Clamp 942 for attach 15mm rail support system to attach lens support, follow focus, matte box, etc. Besides, comes with protective cushions inside to prevent scratches and provides a built-in magnetic spanner for easy access. Compatibility: Nikon Z9 Note: Please remove the shoulder strap ring on the right side before attaching the cage. The cage is not compatible with Nikon WR-R11 remote controller. Package Includes: 1 x Cage 3195 8 x M3 Screw 1 x Top Handle 2165
The Konus Tripod for Binoculars is made of lightweight metal and consists of 3 adjustable sections (from 65 cm to 160 cm). The mounting plate is suitable for binoculars, spotting scopes and cameras. The ball head is equipped with ...
SIRUI P-325FS and P-325FL are advanced photo/video monopods that combine functions of monopods, monopod with feet, extension rods, and tabletop-tripods intο a whole. The innovative modular design, lightweight and flip-lock mechanism are going to provide you with more convenience and creative opportunities. Sirui Monopod P-325FL For Photo/Video The carbon fiber structure gives the P-325FL monopod a weight of only 1.2 kg, which is 20% lighter than previous models from SIRUI. Weighing about the same as a mirrorless camera, this monopod is of great portability for doing outdoor shoots. The monopod features a unique modular design; Four modules, including the mounting plate, main tube section, tripod foot, rubber foot, can be detached and combined freely to form a monopod, an extension rod, or a tabletop tripod. Quick Release System The quick release system has a distinct advantage over the locking knob system. Pull down the top/bottom quick release sleeve to detach modules in a quick and easy way. Thanks to the trigger mechanism, even a mounting plate with heavy gear attached can be inserted intο the quick release sleeves within a second. When inserted, the mounting plate will be locked securely intο place. Quick release mounting screw Press and hold the button to take out the screw. Flip the screw upside down to switch between the 1/4" and 3/8" thread. Quick release tripod base Remove the rubber foot from the tripod base and attach it to the bottom of the main tube to form an extension rod or normal monopod. 360° Panning The upper twist collar has a groove-textured surface for quick adjustment while shooting. Unlock the upper twist collar to get a full 360°panning ability. Quick Leveling Two bubble levels on the base allow you to always keep the monopod in good balance even when you are doing highly mobile outdoor shoots 36° Tilting Use the ball locking knob to adjust the friction of the ball. Loosen the ball locking knob and tilt the monopod 36° in any direction to get a lot of movements. Full-Featured Tripod Foot The tripod foot is well built with solid aluminum, offering two positions at your choice. Legs can be folded up reversely to fit intο your backpack. Rubber & Spike Foot The monopod comes with a rubber foot that can be retracted to reveal a spike. Combine functions of monopods with feet, monopod, extension rods, and tabletop-tripod: Monopod with feet Video recordings where you can move smoothly, but still with stability. Monopod Event shooting, interview shooting, high-angle shooting, places where the tripod is not an option Extension Rod Highly mobile situations, weight distribution of telephoto lenses, a telescopic stick for stabilizers or action cameras Table Tripod Low-angle shooting, desktop recording, close-up shots, vlog shooting.
