Ette nähtud: Foto- ja videokaamerate jaoks; Pikkus kokkupandud kujul (cm): 45..3; Reguleeritava kõrgusega kesksammas: On; Jalgade kummitallad: On; Sisseehitatud tase: On; Kaal (kg): 1,16; Maksimum koormus (kg): 1,5; Muud omadused: "Tripod"; kaitse...
Ette nähtud: Fotokaameratele; Pikkus kokkupandud kujul (cm): 39.8; Reguleeritava kõrgusega kesksammas: On; 3D mehhanism: Ei; Jalgade kummitallad: On; Sisseehitatud tase: On; Kaal (kg): 0,87; Maksimum koormus (kg): 1,5; Muud omadused: "Tripod";...
Ette nähtud: Foto- ja videokaamerate jaoks; Pikkus kokkupandud kujul (cm): 52; Maksimaalne pikkus lahtivõetud kujul (cm): 157; Minimaalne kõrgus kokkupandult: 25,3; Reguleeritava kõrgusega kesksammas: On; 3D mehhanism: Ei; Jalgade läbimõõt (cm):...
Designed to provide the handheld solution, accessory attachment, and protection for the camera, and particularly during low-angle shooting, ease burdens on the arm and assist in camera movements. The kit comes with a Cage for Nikon Z9 (3195) and an ARRI Top Handle (2165) and maintains access to buttons, holes, card slots, battery door, and flip screen after installation. SmallRig 3738 Cage Kit For Nikon Z9 The cage is locked via a 1/4´´-20 screw at the bottom, locating pin and the shoulder strap ring on the right side. The top handle is ergonomically designed to increase comfort and allows quick assembly and disassembly. Built-in mounting points are fully compatible with the SmallRig accessory system. Featuring 1/4´´-20 threaded holes and ARRI 3/8"-16 locating holes for SmallRig Side Handle 2093 or 2426 for side handheld shooting and camera movements, and ARRI 3/8"-16 locating hole on the top of the handle for Monitor Mount 2903 and a cold shoe mount for microphones, LED lights. Arca quick release plate on the bottom of the cage fits directly on to a tripod for tripod shooting. Two 1/4´´-20 threaded holes at the bottom of the front, support SmallRig Rod Clamp 942 for attach 15mm rail support system to attach lens support, follow focus, matte box, etc. Besides, comes with protective cushions inside to prevent scratches and provides a built-in magnetic spanner for easy access. Compatibility: Nikon Z9 Note: Please remove the shoulder strap ring on the right side before attaching the cage. The cage is not compatible with Nikon WR-R11 remote controller. Package Includes: 1 x Cage 3195 8 x M3 Screw 1 x Top Handle 2165
Looking for a compact travel-friendly tripod for everyday use? Then you need Billy 2.0. Perfect for travel and landscape photography Made from 8 layers of 100% pure Carbon Fibre Supports up to 18kg Billy 2.0 is constructed from 8 layers of 100% pure carbon fibre and is one of the lightest tripods in the Punks 2.0 range. Billy 2.0 is built to withstand the rigours of everyday use. Planes, Trains and Automobiles Billy 2.0 is incredibly versatile, designed for all types of photography and an ideal choice for travel, weighing in at just 1.57 kg / 3.46lbs and folding down to 45.7cm / 17.9”. Billy 2.0 is your ideal companion for photography on-the-go. Incredible range Extending to 1.66m/ 65.3” and getting as low as 11.8 cm /4.6”, Billy has a wide range of working heights and can support up to 18 kg / 40 lbs. Jaw-Dropping Like our other Punks 2.0 tripods, Billy 2.0 has three detachable tripod legs which allow for a plethora of configurations including use as a monopod or boom arm as well as a tаble-top tripod (with use of additional footwear). Travel Ready Billy 2.0´s legs counterfold around the column and head, enabling the user to get him down to just 11.8cm / 4.6". 3 Detachable Legs Like their Pro Range 2.0 and Legends Range counterparts, the new Punks 2.0 tripods boast three detachable legs, enabling conversion to monopods or booms, and with the addition of optional Vanz tripod feet (sold separately) can be made into tаbletop tripods. Max Load to Weight Ratio of 10:1 Billy 2.0 is capable of supporting loads up to 10 times his weight. With an 18kg payload, Billy 2.0 is one of the strongest tripods in this class. Locked and Loaded We’ve given our leg locks a face lift. With a fierce new look they boast improved grip and leverage due to a combination of rubber pads and knurling. We´ve added weight to our leg locks lowering their centre of gravity which makes the tripod more stаble to allow use in a multitude of conditions. Shaping The Future Our patented Tri-Mount plate has been refined and offers three hollowed spurs for accessory attachments, and enables Billy 2.0 to fold up, even when the column is detached. A Range of Footwear Billy 2.0 has detachable rubber Bootz, which can be replaced with any of our foot accessories, for maximum stability on any terrain.
Ette nähtud: Foto- ja videokaamerate jaoks; Pikkus kokkupandud kujul (cm): 52; Maksimaalne pikkus lahtivõetud kujul (cm): 190; Minimaalne kõrgus kokkupandult: 25,3; Reguleeritava kõrgusega kesksammas: On; 3D mehhanism: Ei; Jalgade läbimõõt (cm):...
Designed for Nikon Z 8 and to protect the camera and attach accessories. The cage gives full access to buttons, card slots, battery door, and the flip screen. SmallRig 3982 Cage for Nikon Z 8 with MB-N12 Battery Grip It locks the camera via one bottom 1/4"-20 screw and one M2.5 screw on both sides, and have rubber pads which preventing scratches There is many accessory mounting points; 1/4"-20 & 3/8"-16 threaded hole and ARRI 3/8"-16 locating hole which can support SmallRig Top Handle 2165 & 1638, Side Handle 2093 & 2425, Monitor Mount 2903 & 2904 and Magic Arm 3875 Two cold shoe mounts fit a microphone and LED video light The Arca Swiss quick-release bottom plate and side plate enable horizontal and vertical shooting on tripods. The bottom Arca-Swiss quick-release plate also supports DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for a quick switch between handheld, gimbal, and tripod modes. At the front end, there are two 1/4"-20 threaded holes for SmallRig Dual 15mm Rod Clamp 942, matte box and lens support One 1/4"-20 locating hole for SmallRig Single Rod Clamp 3276 for follow focus. Besides, a magnetic double-ended wrench is included for easy disassembly and assembly. Compatibility: Nikon Z 8 with MB-N12 Battery Grip Packaging includes: 1x Cage
Designed to facilitate camera movement and stabilize dual-handed shooting while providing basic mounting points. The highly versatile handle adopts the ARCA-Swiss Type interface and is compatible with the built-in ARCA-Swiss mount plate, cages, L-Bracket, Rotatable Horizontal-to-Vertical Mount Plate, etc. SmallRig 4416 Side Handle ARCA-Type Features ergonomic design, which allows to use of the left & right hand interchangeably to provide a comfortable grip. According to the actual camera size, the handle can be adjusted 36mm vertically to ensure the best grip position. Mainly made of high-strength aluminum alloy, and the stretchable mounting points (1/4"-20 locating holes and ARRI 3/8"-16 locating holes) are made of stainless steel material. Features silicon pads on the contact surface with the palm, which are anti-freeze and anti-slip. Comes with 1/4"-20 threaded hole, 1/4"-20 locating hole, strap hole, cold shoe for attaching SmallRig Monitor Mount 2905, Ballhead Magic Arm 3875, LED Video Light 3286, Microphone 3468, etc. Besides, a built-in magnetic Allen Wrench is included for easy mounting and adjusting accessories. Compatibility: ARCA-Swiss mount plate, cages, L-Bracket, Rotatable Horizontal-to-Vertical Mount Plate, etc. Pacakge includes: 1x Handle 1x Handle Adapter
Ulanzi TT35 Hiking Stick Tripod Kit 1. 5-in-1 Versatility: Use it as a trekking pole, tripod, selfie stick, monopod, or mini tripod for any adventure. 2. Lightweight and Strong: Made from high-quality aluminum alloy and carbon fiber, it supports up to 5kg while weighing only 1.16kg. 3. Quick and Stable Setup: Features a quick-release design for swift, secure transitions and easy setup. 4. Compatible with Popular Systems: Works with Arca-Swiss and F38 quick release plates for versatile camera mounting. 5. Comfort and Stability: Adjustable trekking poles with ergonomic sponge handles and wrist straps ensure comfort on any terrain.
schwarz, passend für FUJIFILM X100VI und X100V Kameras, Abmessungen: 66,4 x 30,3 x 8,9 mm, Gewicht: 7,0g ± 2,0g, Material: Aluminium-Legierung, Silikon
Multifunktsionaalne alus projektorile; Saab kasutada nii laual kui põrandal; Maksimaalne kõrgus: 79,5 cm; Kandevõime: kuni 5 kg; Saab kasutada ka kaamerate ja nutitelefonidega
K&F Concept FH-02 tripod head.The K&F Concept FH-02 tripod head is a versatile, precise and ergonomic tool for photographers and filmmakers. Its compact size, wide compatibility and ease of use make it ideal for a wide range of applications, from landscape photography to dynamic video recording. Thanks to its robust construction and Arca-Swiss quick-release plate, the FH-02 head provides reliability and excellent results in any situation.Panoramic recording and angle adjustmentThe FH-02 head allows full 360° panoramic recording to capture a wide range of scenes. The tilt adjustment of +95°/-55° allows shooting from multiple angles, which is ideal for dynamic shots and precise framing.Wide compatibilityThe FH-02 head is compatible with a wide range of equipment, including SLR cameras, mirrorless cameras, RED cameras and slides. The maximum load of 3 kg ensures stability and safety for your equipment. The lower adapter from ⅜" to ¼" thread allows mounting on most tripods and monopods, adding to its versatility.Arca-Swiss quick-release plateEquipped with an Arca-Swiss quick-release plate, the FH-02 head allows for quick and easy switching between handheld and traditional tripods for increased efficiency. This feature is especially useful during dynamic photo shoots where every second counts.Compact and portableThe FH-02 head is compact and easy to carry, making it an ideal companion for field work. With a light weight of 310 grams and a height of 70 mm, it will fit into a photo bag for convenient transportation and quick set-up.Includedhead with handleAllen wrench¼" screwinstruction manual ManufacturerK&F ConceptModelFH-02Maximum load3 kgThreads¼" i ⅜"Recording angle90° (down), 55° (up)Height70 mmWeight0.3 kgMaterialaluminum alloy
KUPO KCP-359-BK 9″ terasest A-klamber – must (2 tk komplektis). Usaldusväärne ja mitmekülgne abivahend igal filmivõttel või fotostuudios. KUPO 9-tolline terasest A-klamber (tuntud ka kui Spring Clamp) on üks praktilisemaid tööriistu, mida fotograaf või filmitegija kasutada saab. Valmistatud vastupidavast terasest, varustatud PVC-kattega käepidemete ja otstega, mis tagavad kindla haarde ning kaitsevad pindu kriimustuste eest. Tänu vedrumehhanismiga lõugadele on klambrit lihtne ja kiire kasutada, pakkudes usaldusväärset lahendust paljude kergete lisatarvikute kinnitamiseks. Seda saab kasutada näiteks: – reflektori või valguskaardi kinnitamiseks statiivi külge, – taustapaberi rulli paigal hoidmiseks, et see lahti ei rulluks, – erinevate kergete esemete fikseerimiseks võtteplatsil. Põhiomadused: Mõõt: 9″ (22,8 cm) Materjal: teras PVC-kattega käepidemed ja otsad kindlaks ja turvaliseks haardeks Mugav ergonoomiline disain Ei libise ega kahjusta pindu Komplektis: 2 klambrit Eelised: Mitmekülgne kasutus fotostuudios ja filmivõttel Vastupidav konstruktsioon pikaks kasutusajaks Kiire ja lihtne kinnitamine tänu vedrujõule Kompaktne ja kerge kaasa võtta
Zelda is 3LT’s first dedicated L-Bracket. Designed, in cooperation with Nikon, to perfectly fit the shapely contours of the new Z 6 and Z 7 cameras, Zelda gives users full access to all ports and doors on the cameras. Super Strength. Zelda exquisite curves are hewn with precise accuracy from a single block of solid magnesium alloy, giving it a strength never previously found in anything outside Thor’s hammer. Sharp Styling. Anodised in stunning Copper or Metallic Slate Grey, Zelda features perfectly-aligned cut-outs that give users easy access to the tilting screen and lens release buttons on the Z Series cameras. Easy as FTZ… Because Zelda was designed in collaboration with Nikon, the dedicated accessories are 100% compatible. Both the FTZ and WR-R10 can be installed and removed without the need to remove the Bracket. Horizontal Aspect Length: 106 mm. Horizontal Aspect Width: 38 mm. Vertical Aspect Height: 85 mm. Vertical Aspect Width: 38 mm. Weight: 67 g. Compatibility – Standard Arca-Swiss.
Reguleeritav kinnitusjuhik on kaamera põhjaga tasa, ühildub DJI RS 5, DJI RS 4 Pro ja DJI RS 4 stabilisaatoritega, mõõtmed (P x L x K): 55 x 38 x 18 mm, kaal: u. 28 g
Falcon Eyes SP-L1000 põrandastatiiv – ideaalne madalaks valgustuseks stuudios Falcon Eyes Floor Stand SP-L1000 on kompaktne ja praktiline põrandastatiiv, mis on loodud olukordadeks, kus valgustit või tarvikut on vaja paigutada väga madalale. Tänu vaid 12 cm kõrgusel asuvale spigot-kinnitusele sobib see statiiv eriti hästi fototelkide, fotolaudade ja madalate valguslahenduste jaoks. Statiiv võimaldab paigutada valguse täpselt sinna, kuhu on muidu keeruline jõuda – näiteks toote altvalgustuseks või efektvalgustuseks. Peamised omadused Väga madal paigutuskõrgus – spigot vaid 12 cm kõrgusel Võimaldab täpset altpoolt valgustamist, ideaalne fototelkide ja fotolaudade jaoks. Komplektis 1/4´´ ja 3/8´´ keermega spigot-adapter Sobib nii väikestele LED-tuledel kui ka kaameratele, mikrofonidele ja muudele tarvikutele. Paindlik paigutus – kinnituskohad nii statiivijalal kui ka spigotil Lisatarvikuid saab kinnitada nii statiivijala otsa kui ka komplektis oleva spigoti külge. Kokkupandav ja ülikompaktne – vaid 34 cm transportimisel Mugav kaasa võtta ning ideaalne väikesesse stuudiosse või fotosessioonidele väljas. Stabiilne metallkonstruktsioon 3-jalaga alus tagab kindla toe ka ebatasasel pinnal. Milleks sobib Falcon Eyes SP-L1000? fototelkide valgustamiseks altpoolt tootefotograafia, ehted, elektroonika, hobid fotolaua taustavalgustus madalate LED-paneelide või välkude paigutamine stuudio ja videovalgustus kitsastes oludes Tehnilised andmed Kinnituse kõrgus: 12 cm Kinnitus: spigot 1/4´´ ja 3/8´´ (vahetatav) Jalad: 3 tk, pikkused 27 cm + 27 cm + 33 cm Aluse läbimõõt: 55 cm Pikkus kokkupandult: 34 cm Materjal: metall Kaal: kerge ja transpordisõbralik Komplektis Falcon Eyes SP-L1000 põrandastatiiv Spigot-adapter (1/4´´ ja 3/8´´ meekeere)
The National Geographic 4-Section Monopod is lightweight and compact and ideal for when you need steady videos and photos in situations where a tripod wouldn't be practical – such as crowded festivals or rough terrain. Featuring a soft foam grip for extra comfort and an adjustable rubber foot which incorporates a ground spike it will help you keep it steady on almost any surface. And that’s not all there’s even a smart phone holder and carry case included.Perfect for DSLR’s, compact/bridge cameras and smart phones up to 8.4 cm wide. Foam grip & wrist strap Adjustable rubber foot with ground spike Lever leg locks for quick adjustments Maximum height: 170 cm Can carry up to 3 kg Includes a phone mount and a carrying case
Tootekirjeldus Sirui Ballhead Quick Release KS-20 – täpsus ja kiirus igas kaadris Sirui KS-20 kuulpea on loodud fotograafile, kes hindab varustuse töökindlust ja seadistamise kiirust. See on asendamatu tööriist nii maastiku-, portree- kui ka tootefotograafias, kus iga sekund ja millimeeter loeb. Tugevast alumiiniumisulamist valmistatud konstruktsioon tagab, et teie kaameravarustus püsib kindlalt paigal ka kõige nõudlikumates oludes. Miks valida just Sirui KS-20? Selle kuulpea peamine eelis peitub intuitiivses käsitsetavuses. Erinevalt tavapärastest süsteemidest on KS-seeria varustatud külgsuunalise flip-lock kiirkinnitusmehhanismiga. See võimaldab kaamera alusele asetada vaid ühe käega, säästes aega ja hoides fookust loomingulisel protsessil. Turvalisuse tagamiseks on lisatud topeltlukustus, mis välistab kalli tehnika juhusliku lahtipääsemise. Toote mitmekülgsus avaldub selle peenhäälestuses. KS-20 mudelil on integreeritud hõõrdetakistuse (friction adjustment) funktsioon, mis võimaldab seadistada kuuli liikuvust vastavalt kasutatava tehnika kaalule. See tähendab, et raskema teleobjektiiviga töötades ei vaju kaamera lukustuse avamisel järsult alla, vaid liigub sujuvalt ja kontrollitult. Kellele see toode on mõeldud? Sirui KS-20 on suunatud edasijõudnud harrastajatele ja professionaalidele, kes kasutavad peegelkaameraid või suuremaid hübriidkaameraid. See on ideaalne kaaslane: Tehnilised eelised ja funktsionaalsus Kuulpea põhi on varustatud standardse 3/8-tollise keermega, sobides enamikule professionaalsetele statiividele. Arca-Swiss standardile vastav TY-55KS kiirkinnitusplaat tagab ühilduvuse laia valiku lisavarustusega. Tänu läbimõeldud disainile säilitab kuulpea oma positsiooni ka pärast lukustamist, vältides tüütut nihkumist kaadri komponeerimisel. Komplekti sisu:
