The QR11 is a new evolution of universal L bracket. Designed to fit most cameras* and to enable a seamless, effortless workflow between portrait and landscape. The QR11 defies convention with it´s two colour options, and additional functionality. Available in standard size for most modern DSLRs and CSC cameras, and full-size for larger DLSRs and cameras with battery grips. With strap connectors at both the horizontal and vertical aspects, the QR11 has a variety of options for wrist, neck and sling strap compatibility. The QR11´s design enables users to disassemble, with the supplied 3LT Toolz, into two flat sections, for easier stowage in tight spaces. An additional tapped 1/4" thread in the vertical aspect enables connectivity with universal devices, like magic arms, cold and hotshoe adapters, microphones, lights and basically anything with a male 1/4" thread.
Zelda is 3LT’s first dedicated L-Bracket. Designed, in cooperation with Nikon, to perfectly fit the shapely contours of the new Z 6 and Z 7 cameras, Zelda gives users full access to all ports and doors on the cameras. Super Strength. Zelda exquisite curves are hewn with precise accuracy from a single block of solid magnesium alloy, giving it a strength never previously found in anything outside Thor’s hammer. Sharp Styling. Anodised in stunning Copper or Metallic Slate Grey, Zelda features perfectly-aligned cut-outs that give users easy access to the tilting screen and lens release buttons on the Z Series cameras. Easy as FTZ... Because Zelda was designed in collaboration with Nikon, the dedicated accessories are 100% compatible. Both the FTZ and WR-R10 can be installed and removed without the need to remove the Bracket. Horizontal Aspect Length: 106 mm. Horizontal Aspect Width: 38 mm. Vertical Aspect Height: 85 mm. Vertical Aspect Width: 38 mm. Weight: 67 g. Compatibility – Standard Arca-Swiss.
Zelda is 3LT’s first dedicated L-Bracket. Designed, in cooperation with Nikon, to perfectly fit the shapely contours of the new Z 6 and Z 7 cameras, Zelda gives users full access to all ports and doors on the cameras. Super Strength. Zelda exquisite curves are hewn with precise accuracy from a single block of solid magnesium alloy, giving it a strength never previously found in anything outside Thor’s hammer. Sharp Styling. Anodised in stunning Copper or Metallic Slate Grey, Zelda features perfectly-aligned cut-outs that give users easy access to the tilting screen and lens release buttons on the Z Series cameras. Easy as FTZ... Because Zelda was designed in collaboration with Nikon, the dedicated accessories are 100% compatible. Both the FTZ and WR-R10 can be installed and removed without the need to remove the Bracket. Horizontal Aspect Length: 106 mm. Horizontal Aspect Width: 38 mm. Vertical Aspect Height: 85 mm. Vertical Aspect Width: 38 mm. Weight: 67 g. Compatibility – Standard Arca-Swiss.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD Short is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. It has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD Short is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. It has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie Short has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie Short has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Vastupidava konstruktsiooniga Gitzo videopea; Kandevõime: kuni 4 kg; Ette- ja tahakallutus & panoraampööre; Pikk juhthoob pea juhtimiseks; Arca-swiss ühilduv kiirkinnitusplaat
Traveller 163 Ball • Ideaalne piltide stabiliseerimiseks ebatasastel pindadel • Sobib nii foto- kui videokaameratele • 3D kuulpea lubab pildistada portree kui landscape formaadis • Kiire vabastuse plaat kaamerate kiireks vahetamiseks • Kaamera allapoole kinnitamise võimalus lubab teha makrofotosid maapinna lähedalt • Kompaktne suurus lubab seda mugavalt kaasa võtta reisile, matkale või lihtsalt väljasõidule • Valmistatud kergest kuid vastupidavast alumiiniumist • Konks statiivi küljes lubab sinna kinnitada raskusi, et saaksid seda kasutada ka tuuliste ilmadega • Lubatud suurim raskus: 4000g • Kaasas kandekott
SmallRig Universal Cable Clamp BSC2333 Key Features: 1. Fits any accessories with 1/4”-20 threads. 2. Support 2 cables of various thicknesses of diameter 2-7mm. 3. Secures cable via thumbscrew for quick installment. 4. All screws share one hex spanner. SmallRig Universal Cable Clamp BSC2333 is designed to hold cables in place and prevents cable strain when using cameras or monitors. The clamp is attached to the camera/monitor cage or any other accessories via a 1/4”-20 screw. It’s compatible with cable diameter from 2-7mm thickness and supports 2 cables of various thicknesses the same time without using tools, such as microphone cable, power cable, HDMI and SDI cable. The thumbscrew on each side features a hex spanner hole so that you can use the hex spanner to re-tighten it. All the screws share the same hex spanner included in the package.
Gitzo GH2750 on läbinud täieliku disainiuuenduse, mille tulemiks on parem kandevõime ning kergem kaal. Lisaks on sel uuendatud panoraampöörde lukustus, mis on kolm korda tugevam eelmisest versioonist. Kuuli lukustus on samamoodi uuendatud ning kombineerib endas kahte lukustust.
3Legged Thing Leo 2.0 gives you stability and versatility in an ultra-compact package. The professional photographer´s travel tripod. Three detachable legs make the Leo 2.0 tripod incredibly versatile. Legs can be used as booms, and with the addition of Vanz, the tripod can be converted to table-top mode. Compact and designed for travel, Leo´s impressive load to weight ratio is 20:1. Available as tripod only, or in a kit with the AirHed Pro Lever ball head, and a choice of two colourways. A Traveller’s Dream... An evolution of our Lucie Technical Award-winning tripod, Leo 2.0 is an ultra-compact, professional travel tripod system packing an unprecedented level of functionality and capability. Inspired by its predecessor, a Lucie Technical Award Winner, Leo 2.0 has been redesigned to suit every travelling professional´s needs, and transcends the divide between compact travel and professional tripod systems Not one, not two, but three Leo 2.0’s unique modular construction with three detachable legs allows for a multitude of configurations including monopod, low-level and table-top tripod, enabling use for even the most niche of applications. Designed for Mirrorless, built for Medium Format Designed as a more compact solution for photographers, Leo 2.0 exceeds all conventional expectations in strength and features, providing a perfect solution for travelling photographers with even the most complex of set ups. Punching above his weight Leo 2.0 is one of the most powerful tripods in the world today. With a load to weight ratio of 20:1, he’s a trusted workhorse for serious photographers.
Crane M3 Combo Kit contains: CRANE-M3 / Tripod Plus / Cell Phone Mount / TransMount EasyGo Backpack Whether you are shooting with a smartphone, action camera or a compact mirrorless - the Crane M3 is the gimbal for you. Functions like improved grip, a new quick release, bigger screen and the possibility to connect a microphone to the gimbal are just a few of the new exciting features we´ll find on the new gimbal from Zhiyun. On the back of the M3 we find a new 1.22” OLED touch screen with a new easy-to-navigate and intuitive design. Through the screen you can control all the gimbal´s important functions such as operating mode, engine power etc. With gimbal you can also change the camera´s settings by connecting it either with a cord or via Bluetooth. Below the screen is a joystick that can either help you navigate the menus or smoothly control one of the gimbal´s three axes. At the top of the gimbal, we find three powerful engines that can handle up to 90% of all mirrorless cameras on the market. The camera can easily be attached to the gimbal with a newly designed quick release plate that allows you to change battery on the camera without rebalancing. Another exciting feature is a new built-in 800-lumen LED on the top side of the gimbal, colour temperature levels can be set between 3000-5400K. The LED also has the ability connect magnetic light filters that comes in four different colors. With the new Crane M3 comes the TransMount Expansion Base. A module (optional, included in Crane M3 pro package) that allows professional microphones to be directly connected to the gimbal instead of adding extra weight to the camera. Battery life is 8 hours and charging time only 2 hours. The gimbal can easily be powered via a powerbank and supports fast 25W PD charging. The M3 features innovative locks and latches for storage. Gimbal can be adjusted to half-storage/full-storage mode. No axis arm adjustments are required when switching to half-storage mode with a mounted camera, and no rebalances needed when expanded.
Systematic statiivid on Gitzo statiivide seas ühed tugevaimad, kuid pakuvad samas ka ületamatut paindlikkust. Nende modulaarset süsteemi saab kiiresti oma vajadustest lähtudes muuta – näiteks saab sellele hiljem lisada vastavalt vajadusele sobiva kesksamba. Süsinikkiust torudega statiiv on suurepärane baasmudel pildistamiseks nii sise- kui välitingimustes. Uue põlvkonna Systematic statiividel on Gitzo Carbon eXact süsinikkiust torud, uued stabiilsemad statiivijalad ning Easy Link kinnitussüsteem. Tänu nendele innovatsioonidele on statiiv kergem, kiiremini käsitsetav ning toekam kui kunagi varem. Systematic Series 5 statiiv on suurepärane valik professionaalse varustuse jaoks, kuna see on stabiilne ka kuni 40 kg koormuse all.
GorillaPod Mobile Mini – ülikompaktne statiiv nutitelefonile. GorillaPod Mobile Mini kummeeritud lõuad haaravad turvaliselt telefonist samal ajal kui statiivi paindlikud jalad tagavad stabiilsuse mis tahes pinnasel. GorillaPod Mobile Mini sobib kõikidele nutitelefonidele, tava- või pluss-suuruses, ümbrisega või ilma. Stabiilne – GorillaPod Mini säilitab stabiilsuse ka suuremate telefonidega kasutamisel Paindlik – statiivi paindlikud jalad võimaldavad telefoni asendit imelihtsalt muuta Mitmekülgne – Mobile Mini on ideaalne statiiv reisile kaasa võtmiseks ning ka kodus või tööl nutitelefoni hoidikuna kasutamiseks Kaasaskantav – GorillaPod Mobile Mini kaalub kõigest 32 grammi ning mahub vaevata igasse taskusse
BIG T-1271 on kolmesuunalise pea ja kiirkinnitusplaadiga universaalne statiiv, mis ei löö eelarvet lõhki. Kiirklambritega kinnitatavad jalad võimaldavad statiivi kiirelt üles seada ning lisaraskuse konks kesksamba otsas lisab statiivile stabiilsust.
See kerge videokomplekt koosneb 536 CF süsinikstatiivist ning ülisujuvast 504X videopeast. Videopea sobib suurepäraselt kasutamiseks ka peegelkaameratega filmimise ajal. 504X videopeal on kuni 6,5 kg vasturaskus, kuid sobib kasutamiseks seadmetega, mille raskus on kuni 12 kg. Lisaks on videopeal ka Easy Link 3/8" ühendus, mis võimaldab kinnitada välise videovalgusti või monitori mugavalt statiivi külge.
See kerge videokomplekt koosneb 635 süsinikstatiivist ning ülisujuvast 504X videopeast. Videopea sobib suurepäraselt kasutamiseks ka peegelkaameratega filmimise ajal. 504X videopeal on kuni 6,5 kg vasturaskus, kuid sobib kasutamiseks seadmetega, mille raskus on kuni 12 kg. Lisaks on videopeal ka Easy Link 3/8" ühendus, mis võimaldab kinnitada välise videovalgusti või monitori mugavalt statiivi külge. Manfrotto 635 statiivil on kiirkinnitusega jalad, kus piisab ühe lukusti lahti keeramisest, et saaks muuta terve jala kõrgust. Statiivil on alumiiniumist 75 mm kauss ning ka adapter, millega kauss 60 mm peale muuta. Statiivil spetsiaalne mehhanism, mis võimaldab jalgade kaldenurka täpselt seadistada. Jalgade lukustus on kindel ning turvaline ning jalgade otsas on kummikatetega piigid, mis võimaldavad statiivi mugavalt kasutada nii sise- kui välitingimustes.
Tööriistakomplekt, millega saad teha kõike, mida vaja, oma Travel Tripod statiiviga. See komplekt koosneb kokkuvolditavast kuuskantvõtmest, jalaklambrist ja pukside eemaldamise tööriistast. Kokkuvolditav kuuskantvõtmel on nii 4 mm kui 2,5 mm suurused, millega saab kesksamba eemaldada, et statiiv madalamasse asendisse sättida. Samuti saab sellega eemaldada kuulpea tihvti L-Bracket adapteri jaoks või pikema Arca-Swiss kiirkinnitusplaadi jaoks, kinnitada Universal Head adapteri ja Spike Feet komplekti. Pukside eemaldamise tööriistaga saab statiivijalgade sisemisi pukse eemaldada, kui need kahjustada saavad või prahiga täituvad. Jalaklamber kinnitub klõpsuga Travel Tripod'i iga jala külge, nii et tööriist on alati käeulatuses.
Designed to provide the handheld solution, accessory attachment, and protection for the camera, and particularly during low-angle shooting, ease burdens on the arm and assist in camera movements. The kit comes with a Cage for Nikon Z9 (3195) and an ARRI Top Handle (2165) and maintains access to buttons, holes, card slots, battery door, and flip screen after installation. SmallRig 3738 Cage Kit For Nikon Z9 The cage is locked via a 1/4´´-20 screw at the bottom, locating pin and the shoulder strap ring on the right side. The top handle is ergonomically designed to increase comfort and allows quick assembly and disassembly. Built-in mounting points are fully compatible with the SmallRig accessory system. Featuring 1/4´´-20 threaded holes and ARRI 3/8"-16 locating holes for SmallRig Side Handle 2093 or 2426 for side handheld shooting and camera movements, and ARRI 3/8"-16 locating hole on the top of the handle for Monitor Mount 2903 and a cold shoe mount for microphones, LED lights. Arca quick release plate on the bottom of the cage fits directly on to a tripod for tripod shooting. Two 1/4´´-20 threaded holes at the bottom of the front, support SmallRig Rod Clamp 942 for attach 15mm rail support system to attach lens support, follow focus, matte box, etc. Besides, comes with protective cushions inside to prevent scratches and provides a built-in magnetic spanner for easy access. Compatibility: Nikon Z9 Note: Please remove the shoulder strap ring on the right side before attaching the cage. The cage is not compatible with Nikon WR-R11 remote controller. Package Includes: 1 x Cage 3195 8 x M3 Screw 1 x Top Handle 2165
The Konus Tripod for Binoculars is made of lightweight metal and consists of 3 adjustable sections (from 65 cm to 160 cm). The mounting plate is suitable for binoculars, spotting scopes and cameras. The ball head is equipped with ...
Multifunktsionaalne statiiv; Kasuta käsistatiivi, käepideme või lauastatiivina; Ühildub nii kompaktkaamerate kui nutitelefonidega; Sobib kasutamiseks kuni 350 g seadmetega; Kerge ja kompaktne disain
SIRUI P-325FS and P-325FL are advanced photo/video monopods that combine functions of monopods, monopod with feet, extension rods, and tabletop-tripods intο a whole. The innovative modular design, lightweight and flip-lock mechanism are going to provide you with more convenience and creative opportunities. Sirui Monopod P-325FL For Photo/Video The carbon fiber structure gives the P-325FL monopod a weight of only 1.2 kg, which is 20% lighter than previous models from SIRUI. Weighing about the same as a mirrorless camera, this monopod is of great portability for doing outdoor shoots. The monopod features a unique modular design; Four modules, including the mounting plate, main tube section, tripod foot, rubber foot, can be detached and combined freely to form a monopod, an extension rod, or a tabletop tripod. Quick Release System The quick release system has a distinct advantage over the locking knob system. Pull down the top/bottom quick release sleeve to detach modules in a quick and easy way. Thanks to the trigger mechanism, even a mounting plate with heavy gear attached can be inserted intο the quick release sleeves within a second. When inserted, the mounting plate will be locked securely intο place. Quick release mounting screw Press and hold the button to take out the screw. Flip the screw upside down to switch between the 1/4" and 3/8" thread. Quick release tripod base Remove the rubber foot from the tripod base and attach it to the bottom of the main tube to form an extension rod or normal monopod. 360° Panning The upper twist collar has a groove-textured surface for quick adjustment while shooting. Unlock the upper twist collar to get a full 360°panning ability. Quick Leveling Two bubble levels on the base allow you to always keep the monopod in good balance even when you are doing highly mobile outdoor shoots 36° Tilting Use the ball locking knob to adjust the friction of the ball. Loosen the ball locking knob and tilt the monopod 36° in any direction to get a lot of movements. Full-Featured Tripod Foot The tripod foot is well built with solid aluminum, offering two positions at your choice. Legs can be folded up reversely to fit intο your backpack. Rubber & Spike Foot The monopod comes with a rubber foot that can be retracted to reveal a spike. Combine functions of monopods with feet, monopod, extension rods, and tabletop-tripod: Monopod with feet Video recordings where you can move smoothly, but still with stability. Monopod Event shooting, interview shooting, high-angle shooting, places where the tripod is not an option Extension Rod Highly mobile situations, weight distribution of telephoto lenses, a telescopic stick for stabilizers or action cameras Table Tripod Low-angle shooting, desktop recording, close-up shots, vlog shooting.
SIRUI P-325FS and P-325FL are advanced photo/video monopods that combine functions of monopods, monopod with feet, extension rods, and tabletop-tripods intο a whole. The innovative modular design, lightweight and flip-lock mechanism are going to provide you with more convenience and creative opportunities. The carbon fiber structure gives the P-325FS monopod a weight of only 1.17 kg, which is 21% lighter than previous models from SIRUI. Weighing about the same as a mirrorless camera, this monopod is of great portability for doing outdoor shoots. The monopod features a unique modular design; Four modules, including the mounting plate, main tube section, tripod foot, rubber foot, can be detached and combined freely to form a monopod, an extension rod, or a tabletop tripod. Quick Release System The quick release system has a distinct advantage over the locking knob system. Pull down the top/bottom quick release sleeve to detach modules in a quick and easy way. Thanks to the trigger mechanism, even a mounting plate with heavy gear attached can be inserted intο the quick release sleeves within a second. When inserted, the mounting plate will be locked securely intο place. Quick release mounting screw Press and hold the button to take out the screw. Flip the screw upside down to switch between the 1/4" and 3/8" thread. Quick release tripod base Remove the rubber foot from the tripod base and attach it to the bottom of the main tube to form an extension rod or normal monopod. 360° Panning The upper twist collar has a groove-textured surface for quick adjustment while shooting. Unlock the upper twist collar to get a full 360°panning ability. Quick Leveling Two bubble levels on the base allow you to always keep the monopod in good balance even when you are doing highly mobile outdoor shoots 36° Tilting Use the ball locking knob to adjust the friction of the ball. Loosen the ball locking knob and tilt the monopod 36° in any direction to get a lot of movements. Full-Featured Tripod Foot The tripod foot is well built with solid aluminum, offering two positions at your choice. Legs can be folded up reversely to fit intο your backpack. Rubber & Spike Foot The monopod comes with a rubber foot that can be retracted to reveal a spike. Combine functions of monopods with feet, monopod, extension rods, and tabletop-tripod: Monopod with feet Video recordings where you can move smoothly, but still with stability. Monopod Event shooting, interview shooting, high-angle shooting, places where the tripod is not an option Extension Rod Highly mobile situations, weight distribution of telephoto lenses, a telescopic stick for stabilizers or action cameras Table Tripod Low-angle shooting, desktop recording, close-up shots, vlog shooting
