Focus Pro mootor koos varda kinnituskomplektiga, mootori kiirust on suurendatud 30%, ühildub 15 mm universaalvarrastega, sisseehitatud raadiosagedusantenn, latentsusaeg ainult 10 millisekundit, kaal: 123 g
Tugev ning vastupidav statiiv stuudios kasutamiseksTugev, jäik ning vastupidav statiiv, mis on ideaalne stuudiotingimustes kasutamiseks. Kesksamba tõstemehhanism on vändaga, mis teeb raske kaameraga töötamise veel lihtsamaks. Lisaks on kesksambal automaatne lukustus, takistades iseeneslikku alla vajumist. Statiivile on lisatud ka lood ning kesksamba alumisel otsal on statiivipea kinnituse võimalus, et pildistada madalalt. Jalgade otsas on kummiotsikud koos piikidega. Sobib keskformaadile ja ka suurematele kaameratele.
Attach up to 3,6kg Cameras to Moving Cars; Fix to Any Flat Surfaces (Boats, Etc.); Secure Dual 3" Diameter Suction Cups; Designed to Reduce Vibration; 3 Adjustment Points & Ballhead Rotation; 1/4"-20 Camera Mount ...
Manfrotto MT190XPRO4 alumiiniumstatiiviga ning 496RC2 kuulpeaga komplekt nõudlikumale kasutajale, Manfrotto uuendatud disainiga 190 statiivid on veel paremad, kui varem. Esimeseks suureks muudatuseks on kesksamba horisontaalse ...
Vastupidav ning suure kandevõimega ratastega statiivialus suuremate statiividega kasutamiseks.; Alusel on suured 127 mm rattad koos kaablikaitsmega.; Transpordi ajaks lihtsalt kokku klapitav ning saab kasutada ka statiividega, mil ...
Tunned seda? See on uue GorillaPod 325 Magnetic ministatiivi magnetiline tõmme. Uus 325 statiiv on kompaktne, paindlik ning tulipunaste magnetiliste jalgadega, mis võimaldavad nutitelefoni, kompaktkaamera või seikluskaameraga üha põnevamad võttenurki tabada. Uus integreeritud kuulpea on 90° kallutatav ning teeb maastiku- ja portreeasendi vahel valimise mugavaks ja lihtsaks. Aseta GorillaPod 325 Magnetic magnetilisele pinnale, seadista võttenurk ja asu tööle! Uus disain – roostevaba terasega tugevdatud kuulpea Stabiilne – statiivi magnetilised jalad kinnituvad kõiksugu metallesemetele ning paindlikud jalad kohanduvad ka ebastabiilsemate pindadega Paindlik – täielikult kohandatav disain võimaldab kaamera asendit imelihtsalt muuta Mitmekülgne – sobib nii kompaktkaamera, valgusti, mikrofoni, Pico projektori, seikluskaamera või mis tahes 1/4" keermega seadme kinnitamiseks, mis ei kaalu rohkem kui 325 grammi Kaasaskantav – GorillaPod 325 Magnetic kaalub kõigest 62 grammi ning mahub isegi taskusse
Manfrotto MVTTWINGC. Otstarve: Digitaalne/filmikaamera, Maksimaalne kaal (mahutavus): 20 kg, Jalgade arv: 3 jalg(ad). Kõrgus (maksimaalne): 158 cm, Kõrgus (minimaalne): 33,5 cm, Kaal: 3,27 kg
Ellie has 9 separate possible configurations, with infinite scope for individual set ups. With two-axis adjustments, Ellie fits more cameras than any other universal L-Bracket, with an unprecedented level of functionality. Ellie´s detachable release plate can be used in isolation, or with the vertical aspect. Dual Arca-Swiss profile sides and symmetrical 1/4"-20 threaded ends enable the vertical axis to be configured in 8 positions, enabling more cable access than ever before. Ellie´s unique vertical aspect has dual-Arca Swiss profiled edges, and symmetrical ends with twin 1/4"-20 threads, enabling 8 possible side configurations. This gives Ellie unprecedented compatibility and functionality.
Velbon kolmesuunaline statiivipea; Vastupidav alumiiniumist konstruktsioon; Ette-/taha- ja külgkallutus, panoraampööre; Kaalub kõigest 293 g; QB-42 kiirkinnitusplaat & 2 loodi
Ette nähtud: Foto- ja videokaamerate jaoks; Maksimaalne pikkus lahtivõetud kujul (cm): 15; Reguleeritava kõrgusega kesksammas: Ei; 3D mehhanism: Ei; Jalgade läbimõõt (cm): 1; Sisseehitatud tase: Ei; Kaal (kg): 0,115; Maksimum koormus (kg): 0,8;...
Extension Arm Including gripping head D200 For scrims and flags or small lights Technical specifications: Arm length: 102 cm Tube diameter: 16 mm Material: Steel and aluminium alloy Weight: 1.1 kg Colour: Silver
Designed to provide accessory mounts and protection for the Nikon Z9 camera. The cage secures to the camera with one 1/4´´-20 screw & locating pin at the bottom and the right side shoulder strap hole. Featuring multiple 1/4´´-20 threaded holes and ARRI 3/8"-16 locating holes, support SmallRig Top Handle 2165, Side Handle 2093, 2624, and Monitor Mount 2903. Comes with a cold shoe on the top to attach microphones, LED lights, etc. The bottom integrates an Arca Swiss plate that allows switching directly to tripod shooting and features multiple 1/4´´-20 threaded holes allowing for mounting DJI RS 2/RSC 2 Quick Release Plate (Upper) with two 1/4” screws. The front of the cage features two 1/4´´-20 threaded holes for Smallrig 15mm Rod Clamp 942 that supports lens support, follow focus, matte box, etc. The cage features all-around protective rubber pads inside to prevent scratches and a built-in magnetic slotted screwdriver & Allen Wrench that is easy to use. Note: Please remove the shoulder strap ring on the right side before attaching the cage. The cage is not compatible with Nikon WR-R11 remote controller. Package Includes: 1 x Cage 8 x M3 Screw
Designed for Nikon Z 8 to facilitate a switch between horizontal and vertical modes and to improve grip experience. SmallRig 3942 L-Shape Mount Plate For Nikon Z 8 It locks the camera via one 1/4 "-20 screw at the bottom and one locating pin, with rub pads preventing scratches, and has a hinge arm at the battery door that fits the camera curve to enhance grip. There are multiple accessory mounts: An Arca Swiss quick-release plate for Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals 1/4"-20 & 3/8"-16 threaded holes at the bottom that support SmallRig Side Handle 2093 & 3847, Quick Release Plate 1280 Strap holes for SmallRig Hand Strap 3848 & 2456. The L-Bracket also features a QD mount to attach the QD strap buckle, 1/4"-20 threaded holes, suitable for SmallRig Cold Shoe Mount 2736 for the microphone, as well as a 23mm stretchable side plate that allows cables through in vertical shooting. Besides, a magnetic wrench is included for easy disassembly and assembly. Compatibility: Nikon Z 8 Packaging includes: 1x L-Shape Mount Plate 1x Allen Wrench
Designed to protect the camera and attach accessories. The cage features rubber pads that prevent scratches and gives full access to buttons, card slots, flip screen, and battery door. SmallRig 3940 Cage For Nikon Z 8 Locking the camera via one bottom 1/4 "-20 screw, one locating screw, and one side lock adapter on the right Among its accessory mounting points, 1/4"-20 threaded hole, 3/8"-16 threaded hole, and ARRI 3/8"-16 locating hole support SmallRig Side Handle 2093 & 3814, Top Handle 3765, Monitor Mount 2903 & 2904, Manfrotto Plate 1280 & 2458, Holder for Portable Power Banks 2336 and mini V Mount Battery Plate 2987. The side 1/4"-20 locating hole fits SmallRig Single Rod Clamp 3598 and Magic Arm 3873, and left NATO rail quickly connects SmallRig Side Handle 3847 & 4017. Besides, there are cold shoe mounts for the microphone and LED video light, strap holes for Smallrig Hand Strap 3848 & 2456, and QD mounts for the QD strap buckle. The bottom Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for a quick switch between gimbal, handheld, and tripod modes. A double-ended wrench is also included for easy disassembly and assembly. Compatibility: Nikon Z 8 Package includes: 1x Cage
SMALLRIG 4519 Camera Cage for Nikon Z 6III is designed to provide protective housing and versatile expansion options for a camera. The cage securely fastens the camera with a 1/4"-20 screw at the bottom and dual M2.5 screws on the sides, while integrated pads prevent scratching. It provides unobstructed access to all camera interfaces, card slots, the flip screen, and the battery door. The cage features various expansion options, such as 1/4"-20 threaded holes, 3/8"-16 threaded holes, and ARRI locating holes, compatible with SmallRig side handles 2093, 4015, top handles 3765, 2165, monitor mounts 2903, 2904, tripods 4465, 3989, power bank holders 2336 and mini V-mount battery plates 2987. Incorporated 1/4"-20 locating holes on the sides allow for the attachment of accessories such as SmallRig single rod clamp 3598, magic arm 3873, and side handle 4346. Featuring a built-in NATO rail on the left for rapid attachment and detachment of SmallRig side handles 3847, 4017. The integrated cold shoe mounts support microphones, LED video lights, and more. Featuring a built-in wrist strap slot for use with SmallRig wrist straps 3848, 2456, as well as an integrated QD interface compatible with shoulder strap 4118. Arca-Swiss quick-release plate on the bottom is compatible with Arca-type tripods and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 4 / RS 4 Pro gimbals, which allows for easy transitions between gimbals, handheld and tripod shooting. Additionally, a dual-head flat wrench on the base simplifies assembly and disassembly. Compability: Nikon Z 6III Packaging includes: 1x Cage
SMALLRIG 4520 Camera Cage Kit for Nikon Z 6III kit includes a cage, an HDMI & USB-C cable clamp, and a top handle. Designed to provide enhanced handheld shooting, portability, and accessory expansion. The cage features multiple expansion options, such as 1/4"-20 threaded holes, 1/4"-20 locating holes, 3/8"-16 threaded holes, ARRI locating holes, cold shoe mounts, NATO rail, QD mounts, wrist/shoulder strap holes, allowing for the expansion of accessories like monitors, microphones, tripods, follow focuses, handles, and more for versatile video content creation across different scenarios. The cage securely locks the camera with a 1/4"-20 screw at the bottom and dual M2.5 screws on the sides. The ergonomic handle facilitates on-the-go shooting, providing a comfortable and stable filming experience. It is equipped with an HDMI & USB-C cable clamp that securely fastens with a simple twist of a thumbscrew, preventing accidental signal interruptions and ensuring stable signal transmission. Arca-Swiss quick-release plate on the bottom is compatible with Arca-type tripods and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 4 / RS 4 Pro gimbals, which allows for easy transitions between gimbals, handheld and tripod setups. In addition, a magnetic dual-head flat wrench is integrated into the baseplate for easy assembly and disassembly. Compability: Nikon Z 6III Packaging includes: 1x Cage 1x HDMI & USB-C Cable Clamp 1x Top Handle
SMALLRIG 4521 Night Eagle Cage will provide protective housing and versatile expansion options for Nikon Z 6III camera. The cage features a modern design with sleek curves, subtle gold highlights, and a new gunmetal brown color scheme. It adopts a three-point locking system that secures Nikon Z 6III via a bottom 1/4 "-20 screw and two M2.5 screws on both sides, while built-in silicone pads prevent the camera from scratches. It provides unobstructed access to buttons, card slots, flip screens, and battery compartments. The detachable cold shoe mount features anti-deflection positioning pins at the bottom. It can be attached to the sides and top of the cage, allowing for versatile expansion with microphones, lights, and other accessories. The cage features various expansion interfaces, such as 1/4"-20 threaded holes, 3/8"-16 threaded holes and ARRI locating holes, compatible with SmallRig side handles 2093, 4015, top handles 3765, monitor mounts 2903, 2904, tripods 3989, 4465, power bank holders 2336 and mini V-mount battery plates 2987. Incorporated 1/4"-20 locating holes on the sides allow for the attachment of accessories such as the SmallRig single rod clamp 3598, magic arm 3873, and side handle 4346. Featuring a built-in NATO rail on the left for rapid attachment and detachment of SmallRig side handles 3847, 4017. The cage also features built-in wrist strap slots for use with SmallRig wrist straps 3848, 2456, as well as an integrated QD interface compatible with SmallRig shoulder strap 4118. Arca-Swiss quick-release plate on the bottom is compatible with Arca-type tripod and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 4 / RS 4 Pro gimbals, which allows for easy transitions between gimbals, handheld and tripod setups. Additionally, a dual-head flat wrench on the base simplifies assembly and disassembly. Compability: Nikon Z 6III Packaging includes: 1x Cage 1x Cold Shoe Adapter
SMALLRIG 4522 Night Eagle Cage Kit for Nikon Z 6III includes a cage, a top handle, an HDMI & USB-C cable clamp, and a cold shoe mount. Designed to provide enhanced low-angle shooting, protective housing, and versatile expansion options for a camera. The cage features a modern design with sleek curves, subtle gold highlights, and a new gunmetal brown color. The cable clamp adopts a press-and-flip design that allows for easy access to the interfaces without disassembling and prevents accidental signal interruptions ensuring stable signal transmission. The detachable cold shoe mount features anti-deflection positioning pins at the bottom. It can be attached to the sides and top of the cage, allowing for versatile expansion with SmallRig microphones 3487, LED video lights 3286, and other accessories. The ergonomic handle facilitates camera movement and features built-in storage for commonly used screws such as 1/4"-20 screws, 3/8"-16 screws, and M2.5 screws. The kit features various expansion interfaces, such as 1/4"-20 threaded holes, 1/4"-20 locating holes, 3/8"-16 threaded holes, ARRI locating holes, NATO rail, QD mounts, wrist/shoulder strap holes. The cage can be expanded with SmallRig monitor mounts 2903, side handles 3847, 4016, 4015, 2093, top handles 2165, 3765, rod clamps 3598, magic arms 3875, tripods 4465, 4060, 4353, LED video lights 3286, microphones 3487, and more. The integrated Arca-Swiss quick-release plate on the bottom supports Arca-type tripods and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 4 / RS 4 Pro gimbals, which allows for easy transitions between gimbals, handheld and tripod setups. Compability: Nikon Z 6III Packaging includes: 1x Cage 1x Cold Shoe Mount 1x HDMI & USB-C Cable Clamp 1x Top Handle
Tailored for mobile shooting, elevating stability for handheld shooting and offering essential mounting options. The handle features two 1/4"-20 threaded holes with an 18mm spacing, ensuring broad compatibility. SmallRig 4755 Lightweight Mini Side Handle Its ergonomic bilateral design enables seamless interchangeability between the left and right sides without the need to reassemble the handle adapter, enhancing the shooting experience with comfort. Featuring a 30mm adjustable handle grip positioning, users can customize the optimal handling based on the device´s dimensions. Equipped with 1/4"-20 threaded holes and positioning holes, the handle supports attaching accessories. Additionally, it features a built-in cold shoe mount to expand with accessories like SmallRig LED Video Light 3286 and On-Camera Microphone 3468. Despite its compact and lightweight design at only 116g, the handle can support up to 5kg. The integrated magnetic Allen wrench facilitates the adjustment and mounting of accessories for seamless operation. Compability: Two 1/4"-20 threaded holes with a spacing of 18mm Packaging includes: 1x Handle 1x Handle Adapter
