Tugeva konstruktsiooniga, kuid kerge üksjala ja ministatiivi komplekt – ideaalne kitsastes või ülerahvastatud paikades kasutamiseks. Komplekt kõrgub kuni 187 cm-ni, võimaldades mugavalt filmida ka rahvasumma kohalt. 3-suunaline pea võimaldab mugavalt kaadrit sättida just nii nagu soovid ning 4-osalise üksjala kõrgus on kergesti kohandatav. Ministatiivi kaheosalised jalad on seejuures piisavalt kompaktsed, et kitsastes oludes toime tulla ning kasutusmugavust lisab veelgi käepärane kiirkinnitussüsteem.
SIRUI´s exclusive locking mechanism for guaranteed precision and safety. Separate control knobs for panning and locking. The friction knob is conveniently located on the main locking knob. Bubble level for fast horizontal leveling.
Ette nähtud: Foto- ja videokaamerate jaoks; Pikkus kokkupandud kujul (cm): 53; Maksimaalne pikkus lahtivõetud kujul (cm): 163; Minimaalne kõrgus kokkupandult: 38,5; Reguleeritava kõrgusega kesksammas: Ei; 3D mehhanism: Ei; Jalgade kummitallad: On;...
Designed to provide accessory mounts and protection for the Nikon Z9 camera. The cage secures to the camera with one 1/4´´-20 screw & locating pin at the bottom and the right side shoulder strap hole. Featuring multiple 1/4´´-20 threaded holes and ARRI 3/8"-16 locating holes, support SmallRig Top Handle 2165, Side Handle 2093, 2624, and Monitor Mount 2903. Comes with a cold shoe on the top to attach microphones, LED lights, etc. The bottom integrates an Arca Swiss plate that allows switching directly to tripod shooting and features multiple 1/4´´-20 threaded holes allowing for mounting DJI RS 2/RSC 2 Quick Release Plate (Upper) with two 1/4” screws. The front of the cage features two 1/4´´-20 threaded holes for Smallrig 15mm Rod Clamp 942 that supports lens support, follow focus, matte box, etc. The cage features all-around protective rubber pads inside to prevent scratches and a built-in magnetic slotted screwdriver & Allen Wrench that is easy to use. Note: Please remove the shoulder strap ring on the right side before attaching the cage. The cage is not compatible with Nikon WR-R11 remote controller. Package Includes: 1 x Cage 8 x M3 Screw
SmallRig 4249 Super Clamp ARRI roseti kinnitusega klamber toetab standardseid M6 kruvisid ja ARRI rosetiga käepidemeid, nagu Nikon MC-N10 ja Sony FX6. Klambril on 14–55 mm haardevõime, mis võimaldab kinnitada enamiku statiivi käepidemeid ja torusid. Lisaks on see varustatud sisseehitatud libisemisvastaste padjanditega, et tagada seadmete ohutus ja stabiilsus. Omadused: - Mitmed kinnituskohad, näiteks 1/4"-20 keermestatud ava ja ARRI 3/8"-16 asukohaava, mis võimaldavad kinnitada SmallRigi Magic Arm 3875, 2115 jms. - Valmistatud lennundusklassi alumiiniumisulamist ja roostevabast terasest, mis tagab suurema vastupidavuse ja tugevuse. Palun ärge võtke roseti adapterit lahti, kuna see võib põhjustada lõtvust ja ühenduse katkemist. Kandevõime: 5 kg Ühilduvus: - Nikon MC-N10 kaugjuhtimispult - Sony FX6 kaugjuhtimiskäepide - Standardne M6 kruvi, käepidemed ja tarvikud ARRI rosetiga Pakend sisaldab: - 1x Super Clamp ARRI roseti kinnitusega Designed for remote handles to be attached to a tripod or slider for easier shooting. Allows to connect handles with ARRI rosette to a tripod or telescopic handle of the slider for easier camera shooting and movemen SmallRig 4249 Super Clamp with ARRI Rosette Mount It supports standard M6 screws and handles with ARRI rosettes like Nikon MC-N10 and Sony FX6. With a 14-55mm clamping range, this item can clamp most tripod handles, rods, and comes with built-in anti-slip cushions to ensure the safety and stability of the devices. Features multiple mounting points, such as 1/4"-20 threaded hole and ARRI 3/8"-16 locating hole to attach SmallRig Magic Arm 3875 & 2115 etc. Besides, the clamp is made of aircraft-grade aluminum alloy and stainless steel for increased sturdiness and durability. Note: Please do not disassemble the rosette adapter, it may causeloose and disconnection Load capacity: 5kg Compatibility: Nikon MC-N10 Remote Grip Sony FX6 Remote Handle Standard M6 screw, handlesand accessories with ARRI rosette Package includes: 1x Super Clamp with ARRI Rosette Mount Vastutav isik ELis: GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA, CASTELLANA 9144, Madrid, 28046, ES, compliance.gavimosa@outlook.com
Secure your digital camera to the side of a helmet, atop your surfboard or onto any other smooth solid surface. This low profile suction cup guarantees a reliable hold for equipment up to 1lb (16oz) in strenuous environments where wind, vibration, g-force or rain may come into play. Adjustable 180 degree rotation at the base of the Stealth Mount enables complete control of filming angles and perspectives during any sport or activity, while a discreet compact build provides optimal stability without any added weight or interference.
Manfrotto MT190XPRO3 alumiiniumist statiiv: Manfrotto uuendatud disainiga 190 statiivid on veel paremad, kui varem. Esimeseks suureks muudatuseks on kesksamba horisontaalse asendi mehhanismi integreerimine statiivi kesksamba ...
Mitmekülgne, kuid kompaktne statiiv koos kuulpeaga; 3-osalised alumiiniumist jalad 90° kesksamba liikuvusega; Tugev ja usaldusväärne lukustussüsteem; Ideaalse kadreeringu tagavad vesiloodid; Kuulpea liigub sujuvalt ja täpselt
MTALUVR VR statiiv on truuks kaaslaseks kõigile 360° foto- ja videograafidele. Selle minimalistlik disain ühendab endas töökindluse ja stabiilsuse. Statiivil on M-lock süsteemiga alumiiniumist jalad, mille keeratav mehhanism teeb jalgade lukustamise imelihtsaks. M-lock lukustuse avamiseks ja sulgemiseks piisab vaid kergest 90° pöördest, mis teeb statiivi üles seadmise mugavaks ja kiireks. Lisaks saab statiivijalgu eraldiseisvalt seadistada nelja nurga alla ning see võimaldab rohkelt kohandamisvõimalusi ning suurendab stabiilsust. MTALUVR sobib suurepäraselt kasutamiseks koos MBOOMAVR poomiga (ei kuulu komplekti), mille kinnitamiseks on statiiviga kaasas spetsiaalselt disainitud alumiiniumist adapter, et tagada maksimaalne stabiilsus, isegi kui kaamera on mitmeid meetreid maapinnast kõrgemal.
Godox MT-01 mini Tripod Folding Table top stand and Grip Stabilizer for Digital Camera, DSLR, Video Camera & Camcorder --Travel Portable Tripod. Godox Mini Tripod MT01 with 1/4" Mounting screw Socket 5 levels adjustable table tripod For Godox AD200/Cameras/LED Light.
Videostatiivide suurimaks miinuseks on see, et need on fikseeritud ühe koha peale ning äärmiselt ebamugav muuta võttenurka. Nüüd ei pea enam selle pärast muretsema. See kummeeritud 80mm ratastega alus kannab kuni 25kg koormust ning võimaldab stuudios või välitingimustes väikese vaevaga süsteemi asukohta muuta. Sellel alusel on ühe hoovaga pidur, mis fikseerib kõik kolm ratast korraga. Alusel on olemas ka 3/8" keere statiivipea kinnitamiseks, mis võimaldab kasutada äärmiselt madalat võttenurka. Transpordiks on võimalik jalad kokku klappida. Materjal: Alumiinium Kõrgus: 9 cm Jalgade diameeter: 127 cm Kandevõime: 25 kg Kaal: 4,5 kg
Pikendatud kiirkinnitusplaat aitab paremini tasakaalustada ebahariliku kaalujaotusega videokaameraid (teleobjektiiv või raske aku), kuna kaamera asendit plaadil on võimalik mugavalt kohandada. Kummeeritud kate plaadi pinnal lisab veelgi turvalisust. Komplektis sisaldub 1/4" ning 1/4"–3/8" adapter.
Manfrotto Element MII Monopod on äärmiselt kerge ning kompaktne - perfektne pildistamiseks ning videosalvestuseks ükstapuha mis olukorras. Üksjalal on ergonoomiline pehme käepide ning ka randmerihm - nii püsib üksjalg koos kaameraga kindlalt haardes. Element MII Monopod on disainitud kasutamaks peegel-, hübriid- ja kompaktkaameratega. Kaamera kinnitamiseks on kasutusel 1/4" keere, mis olemas pea kõikidel kaameratel.
SIRUI P-325FS and P-325FL are advanced photo/video monopods that combine functions of monopods, monopod with feet, extension rods, and tabletop-tripods intο a whole. The innovative modular design, lightweight and flip-lock mechanism are going to provide you with more convenience and creative opportunities. Sirui Monopod P-325FL For Photo/Video The carbon fiber structure gives the P-325FL monopod a weight of only 1.2 kg, which is 20% lighter than previous models from SIRUI. Weighing about the same as a mirrorless camera, this monopod is of great portability for doing outdoor shoots. The monopod features a unique modular design; Four modules, including the mounting plate, main tube section, tripod foot, rubber foot, can be detached and combined freely to form a monopod, an extension rod, or a tabletop tripod. Quick Release System The quick release system has a distinct advantage over the locking knob system. Pull down the top/bottom quick release sleeve to detach modules in a quick and easy way. Thanks to the trigger mechanism, even a mounting plate with heavy gear attached can be inserted intο the quick release sleeves within a second. When inserted, the mounting plate will be locked securely intο place. Quick release mounting screw Press and hold the button to take out the screw. Flip the screw upside down to switch between the 1/4" and 3/8" thread. Quick release tripod base Remove the rubber foot from the tripod base and attach it to the bottom of the main tube to form an extension rod or normal monopod. 360° Panning The upper twist collar has a groove-textured surface for quick adjustment while shooting. Unlock the upper twist collar to get a full 360°panning ability. Quick Leveling Two bubble levels on the base allow you to always keep the monopod in good balance even when you are doing highly mobile outdoor shoots 36° Tilting Use the ball locking knob to adjust the friction of the ball. Loosen the ball locking knob and tilt the monopod 36° in any direction to get a lot of movements. Full-Featured Tripod Foot The tripod foot is well built with solid aluminum, offering two positions at your choice. Legs can be folded up reversely to fit intο your backpack. Rubber & Spike Foot The monopod comes with a rubber foot that can be retracted to reveal a spike. Combine functions of monopods with feet, monopod, extension rods, and tabletop-tripod: Monopod with feet Video recordings where you can move smoothly, but still with stability. Monopod Event shooting, interview shooting, high-angle shooting, places where the tripod is not an option Extension Rod Highly mobile situations, weight distribution of telephoto lenses, a telescopic stick for stabilizers or action cameras Table Tripod Low-angle shooting, desktop recording, close-up shots, vlog shooting.
Prime tripod for smaller Video-cameras and Spottingscopes. Sirui ST-124+VA-5 Carbon Tripod Video Kit The Sirui Standard Series tripods are compact, lightweight, strong and waterproof. Packed with features they are the perfect match mirrorless and compact DSLR cameras made for Video. Leightweight and strong carbon fiber sections provide the ultimate stability for your camera. The large leg diameters enhance the strength of the carbon layers. The unique triangle shaped center column allows for a more compact design as well as a sturdier center section. The center column can be reversed to achieve ultra low shooting sections. An extra feature is waterproof twist leg locks. This tripod have interchangeable rubber feet and metal spikes, and 4 section legs. SIRUI VA-5 Professional Fluid Video Head have a fluid system designed to produce smooth pans and tilts. And an internal spring-assisted counter-balance mechanism provides added support, smoother tilt movements and protection to your equipment. Forward/backward camera position adjustments for balance are fast and easy. And the dual safety lock system prevents the camera from falling off when the primary locking mechanism is loosened. To make horizontal alignment of the head extra easy, there are 2 bubble levels - one on the base of the head to align the tripod and one on top of the video head to align the camera (a SIRUI first!). Recommended for video and birdwatching.
One-Step Height Adjustment Modular Monopod with feet. Just rotate the twist lock to fast extend or retract this monopod, which makes it convenient and easy to operate. SIRUI MONOPOD SVM-145 RAPID SYSTEM Rapid One-Step Height Adjustment! SIRUI’s patent-Rapid System-is used here to save your time and energy. You can just rotate the twist lock to fast extend or retract this monopod, which makes it convenient and easy to operate. Thanks to this creation, you won’t miss any brilliant scene during fast- moving shooting. Ergonomic design twist lock with rubber pad on it allows you to tighten or loosen this lock with less effort This flexible monopod works well in fast-moving situations. Lightweight carbon fiber is added to further decrease the weight of this monopod, ideal for run-and-gun shooting Black carbon fiber and metal gray look makes it merge unobtrusively intο the background in low light situation, avoiding catching much attention of the models. The mounting plate, monopod leg and tripod base can be detached and freely combined intο a monopod, a monopod with feet or a tabletop tripod. This is a versatile tool that serves many purposes: Monopod / Monopod with feet - Suitable for daily shooting, simulating drone shooting, or situation not suitable for tripods. With Extension Rod (sold separately) - Suitable for highly mobile situations, weight distribution of telephoto lenses and travel shooting. Tabletop Tripod - Suitable for low angle shooting, tabletop shooting, close-up and handheld vlog shooting. Rapid Setup & Breakdown Automatically Lock Pull down the gray part once only to loosen and release the monopod adapter. Even heavy equipment is mounted on the adapter, it is also safe and rapid to insert the equipment without aligning carefully. And you can hold the equipment with both hands to install. Optional Extension Rod The max height of SVM145 is 145cm and the max height of SVM165 is 165cm. And if the monopod is not high enough for some cases, the optional SVM-E extension rod (sold separately) can be added to help increase the height of this monopod by 30cm, ideal for higher shooting or simulating camera crane. Moreover, this extension rod works well with Rapid System. The Extension rod is also compatible with tabletop tripod! Strong & Durable This monopod has been rigorously tested; Such as working temperature from -30℃ to 70℃, 48h parts salt spray corrosion test and 72h transportation test, pressure test, etc. The Sirui SVM monopod does do a good job, so it is your best partner even in harsh environment Recommended max load capacity: 5Kg The bottom part (Tabletop Tripod) has a ballhead with 36° all directtions tilting in any directions gives you a lot of flexibility. Retractable metal spikes are designed to meet different shooting needs Carying bag is included.
Multifunktsionaalne alus projektorile; Saab kasutada nii laual kui põrandal; Maksimaalne kõrgus: 79,5 cm; Kandevõime: kuni 5 kg; Saab kasutada ka kaamerate ja nutitelefonidega
