Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD Short is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. It has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie Short has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie Short has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Joby GorillaPod 3K Pro Kit on ideaalne kaaslane tipptaseme hübriidkaameratele. Statiivi uus disain hõlmab patenteeritud tehnoloogiat, mis tagab enneolematu vastupidavuse ja stabiilsuse, ning Arca Swiss kiirkinnitussüsteemiga kuulpead, mis võimaldab hõlpsalt ja mugavalt kadreerida. GorillaPod 3K Pro Kit sobib truuks seltsiliseks nii fotograafidele, vlogijatele kui ajakirjanikele – seda saab kasutada nii tavalise statiivi kui käsistatiivina. Statiivi painduv disain võimaldab GorillaPodi jalad mässida torude jms esemete ümber ning sättida statiiv hõlpsalt ka ebatasasele pinnale. GorillaPod 3K Pro Kit sobib kuni 3 kg kaaluvatele kaameratele. Loodud professionaaltasemel hübriidkaameratele Patenteeritud metallist kuulpesade konstruktsioon, mis on vastupidavam kui varem Arca Swiss kiirkinnitussüsteemiga kuulpea, millel on mugav ühe nupuga seadistamine ja fikseerimine Kannab kuni 3 kg suurust raskust
MVKN12TWINMC statiivikomplekt koosneb Nitrotech N12 videopeast ja Manfrotto MVTTWINMC statiivist. Manfrotto Nitrotech N12 videopea Manfrotto Nitrotech N12 videopea on varustatud unikaalse sujuvalt seadistatava vasturaskuse süsteemiga. Lämmastiktäiega süsteem tagab statiivi ülemisele poolele sobiva vasturaskuse – kusjuures vasturaskus on sujuvalt seadistatav 4–12-kilogrammise tehnika jaoks. See tähendab, et statiivipead ei ole vaja valida selle järgi, kui raske on Su kaamera koos objektiiviga või arvestama teist objektiivi kasutades sellega, et vasturaskust on liiga palju või liiga vähe. Lisaks on Nitrotech N12 nii pöörates kui kallutades eraldi seadistatav ja lukustatav, tehes kaamera suunamuutused väga täpseks ja kergesti kontrollitavaks. Nitrotech N12 videopeal on kaks 3/8" kinnituspesa – ühte saab kinnitada statiivipea juhthoova, teist aga kasutada Easy Link ühendusena ehk kasutada näiteks videomonitori, videovalgusti või mõne muu tarviku kinnitamiseks. Kaamera kinnitamiseks on kasutusel 504PLONG tüüpi kiirkinnitusplaat, mis lihtsustab õige tasakaalupunkti saavutamist. Manfrotto MVTTWINMC statiiv MVTTWINMC kaheastmeline süsinikkiust kaksikjalgadega statiiv pakub eriti jäika ja stabiilset tuge igal ettevõtmisel. Professionaaltasemel videote tegemisel on see aga tõeline must-have. Statiivil on alumiiniumist 100 mm kauss ning ka adapter, millega kauss 75 mm peale muuta. Statiivil on kesktasandil spetsiaalne mehhanism, mis võimaldab jalgade kaldenurka täpselt seadistada. Jalgade lukustus on kindel ning turvaline ning jalgade otsas on kummikatetega piigid, mis võimaldavad statiivi mugavalt kasutada nii sise- kui välitingimustes. Süsteemi hõlpsaks kaasas kandmiseks on komplektis ka mugav kandekott.
SmallRig Universal Cable Clamp BSC2333 Key Features: 1. Fits any accessories with 1/4”-20 threads. 2. Support 2 cables of various thicknesses of diameter 2-7mm. 3. Secures cable via thumbscrew for quick installment. 4. All screws share one hex spanner. SmallRig Universal Cable Clamp BSC2333 is designed to hold cables in place and prevents cable strain when using cameras or monitors. The clamp is attached to the camera/monitor cage or any other accessories via a 1/4”-20 screw. It’s compatible with cable diameter from 2-7mm thickness and supports 2 cables of various thicknesses the same time without using tools, such as microphone cable, power cable, HDMI and SDI cable. The thumbscrew on each side features a hex spanner hole so that you can use the hex spanner to re-tighten it. All the screws share the same hex spanner included in the package.
Gitzo GH2750 on läbinud täieliku disainiuuenduse, mille tulemiks on parem kandevõime ning kergem kaal. Lisaks on sel uuendatud panoraampöörde lukustus, mis on kolm korda tugevam eelmisest versioonist. Kuuli lukustus on samamoodi uuendatud ning kombineerib endas kahte lukustust.
3Legged Thing Leo 2.0 gives you stability and versatility in an ultra-compact package. The professional photographer´s travel tripod. Three detachable legs make the Leo 2.0 tripod incredibly versatile. Legs can be used as booms, and with the addition of Vanz, the tripod can be converted to table-top mode. Compact and designed for travel, Leo´s impressive load to weight ratio is 20:1. Available as tripod only, or in a kit with the AirHed Pro Lever ball head, and a choice of two colourways. A Traveller’s Dream... An evolution of our Lucie Technical Award-winning tripod, Leo 2.0 is an ultra-compact, professional travel tripod system packing an unprecedented level of functionality and capability. Inspired by its predecessor, a Lucie Technical Award Winner, Leo 2.0 has been redesigned to suit every travelling professional´s needs, and transcends the divide between compact travel and professional tripod systems Not one, not two, but three Leo 2.0’s unique modular construction with three detachable legs allows for a multitude of configurations including monopod, low-level and table-top tripod, enabling use for even the most niche of applications. Designed for Mirrorless, built for Medium Format Designed as a more compact solution for photographers, Leo 2.0 exceeds all conventional expectations in strength and features, providing a perfect solution for travelling photographers with even the most complex of set ups. Punching above his weight Leo 2.0 is one of the most powerful tripods in the world today. With a load to weight ratio of 20:1, he’s a trusted workhorse for serious photographers.
Crane M3 Combo Kit contains: CRANE-M3 / Tripod Plus / Cell Phone Mount / TransMount EasyGo Backpack Whether you are shooting with a smartphone, action camera or a compact mirrorless - the Crane M3 is the gimbal for you. Functions like improved grip, a new quick release, bigger screen and the possibility to connect a microphone to the gimbal are just a few of the new exciting features we´ll find on the new gimbal from Zhiyun. On the back of the M3 we find a new 1.22” OLED touch screen with a new easy-to-navigate and intuitive design. Through the screen you can control all the gimbal´s important functions such as operating mode, engine power etc. With gimbal you can also change the camera´s settings by connecting it either with a cord or via Bluetooth. Below the screen is a joystick that can either help you navigate the menus or smoothly control one of the gimbal´s three axes. At the top of the gimbal, we find three powerful engines that can handle up to 90% of all mirrorless cameras on the market. The camera can easily be attached to the gimbal with a newly designed quick release plate that allows you to change battery on the camera without rebalancing. Another exciting feature is a new built-in 800-lumen LED on the top side of the gimbal, colour temperature levels can be set between 3000-5400K. The LED also has the ability connect magnetic light filters that comes in four different colors. With the new Crane M3 comes the TransMount Expansion Base. A module (optional, included in Crane M3 pro package) that allows professional microphones to be directly connected to the gimbal instead of adding extra weight to the camera. Battery life is 8 hours and charging time only 2 hours. The gimbal can easily be powered via a powerbank and supports fast 25W PD charging. The M3 features innovative locks and latches for storage. Gimbal can be adjusted to half-storage/full-storage mode. No axis arm adjustments are required when switching to half-storage mode with a mounted camera, and no rebalances needed when expanded.
Vaid 18 cm kõrgune BIG MT-818M ministatiiv mahub hõlpsalt igasse fotokotti. Statiivi alumiiniumist disain kaalub vaid 200 g, kuid suudab kanda kuni 6 kg suurust raskust. Lisaks on statiivi igal jalal on 1/4" kinnitused, millele saab erinevaid lisatarvikuid kinnitada. välk, LED valgusti, mikrofon või muud fototarvikud – MT-818M tuleb kõigega toime. Tänu 4-astmelisele jalalukustusele saab statiivi kõrgust mugavalt kohendada – maksimaalne töökõrgus on sel 15 cm ning minimaalne muljetavaldav 2,7 cm. Lisaks saab statiivi kasutada mugava käepidemena videosid salvestades, andes kaamera käsitsemiseks parema haarde.
Caruba Flexstar25 ministatiiv on paindlik ja kompaktne statiiv, mis sobib ideaalselt kompaktkaamera või seikluskaameraga kasutamiseks. Statiivi paindlikke jalgu on lihtne painutada, nii et saad statiivi näiteks toru, puuoksa vm ümber mässida. Tänu painduvatele jalgadele saab seda kasutada ka ebatasastel pindadel. Statiivi kummist jalaotsad tagavad, et see püsib ka libedal pinnal kindlalt paigal. Statiivijalgu ümbritsev vahtkummist polsterdus kaitseb nii jalgu kui ka kaamerat, kui see kaameraga kokku puutub. Flexstar25-l on varustatud nii 1/4" kui ka 3/8" kinnitusega, nii et seda saab kasutada pea iga kaameraga. Paindlik ja kompaktne statiiv Sobib kompaktkaamera ja seikluskaameraga kasutamiseks Paindlikud jalad Kummist libisemisvastased jalaotsad Kriime ennetav vahtkummist polsterdus 1/4" ja 3/8" kinnitus
Manfrotto 625 kiirkinnitusadapter koos plaadiga on mõeldud üksjalgadele ning statiivipeadele, millel puudub kiirkinnitussüsteem. See sobib 1/4" või 3/8" keermega üksjalgadele ning statiivipeadele. 625 kiirkinnitusadapteriga on kaasas ka kiirkinnitusplaat, sellel on kaks integreeritud loodi ning kaamera kinnitub adapterile 1/4" keermega. Kiirkinnitusplaadi mudel: Manfrotto 030-14
See kerge videokomplekt koosneb 536 CF süsinikstatiivist ning ülisujuvast 504X videopeast. Videopea sobib suurepäraselt kasutamiseks ka peegelkaameratega filmimise ajal. 504X videopeal on kuni 6,5 kg vasturaskus, kuid sobib kasutamiseks seadmetega, mille raskus on kuni 12 kg. Lisaks on videopeal ka Easy Link 3/8" ühendus, mis võimaldab kinnitada välise videovalgusti või monitori mugavalt statiivi külge.
See kerge videokomplekt koosneb 635 süsinikstatiivist ning ülisujuvast 504X videopeast. Videopea sobib suurepäraselt kasutamiseks ka peegelkaameratega filmimise ajal. 504X videopeal on kuni 6,5 kg vasturaskus, kuid sobib kasutamiseks seadmetega, mille raskus on kuni 12 kg. Lisaks on videopeal ka Easy Link 3/8" ühendus, mis võimaldab kinnitada välise videovalgusti või monitori mugavalt statiivi külge. Manfrotto 635 statiivil on kiirkinnitusega jalad, kus piisab ühe lukusti lahti keeramisest, et saaks muuta terve jala kõrgust. Statiivil on alumiiniumist 75 mm kauss ning ka adapter, millega kauss 60 mm peale muuta. Statiivil spetsiaalne mehhanism, mis võimaldab jalgade kaldenurka täpselt seadistada. Jalgade lukustus on kindel ning turvaline ning jalgade otsas on kummikatetega piigid, mis võimaldavad statiivi mugavalt kasutada nii sise- kui välitingimustes.
Aastaid on statiivide ümmargune disain raisanud tarbetult ruumi ja muutnud statiivid suuremaks kui vaja. Peak Design uued reisistatiivid on täiesti uue disainiga, mis lubab neil kokkupakituna olla sama suure diameetriga kui veepudel ilma, et statiiv ohverdaks stabiilsust ja funktsionaalsust. Peak Design reisistatiivi on lihtne üles seada ja kokku panna tänu uudsetele kinnitustele. Statiivi kesksamba seest leiab spetsiaalse mobiilihoidiku. Kasulike lisasid ja funktsioone leiab kõikjalt statiivilt. Lisaks on statiiv ehitatud vastupidamaks kõikidel seiklustel, selle kinnituseks on Peak Design andnud neile eluaegse garantii. Statiivi kasutab kuulpeal Arca Swiss kiirkinnitussüsteemi – seega saab seda kasutada nii Peak Design kiirkinnitusplaatidega kui ka kõikide teiste turul olevate Arca Swiss süsteemi L-bracketite ja plaatidega.
Designed to provide accessory mounts and protection for the Nikon Z9 camera. The cage secures to the camera with one 1/4´´-20 screw & locating pin at the bottom and the right side shoulder strap hole. Featuring multiple 1/4´´-20 threaded holes and ARRI 3/8"-16 locating holes, support SmallRig Top Handle 2165, Side Handle 2093, 2624, and Monitor Mount 2903. Comes with a cold shoe on the top to attach microphones, LED lights, etc. The bottom integrates an Arca Swiss plate that allows switching directly to tripod shooting and features multiple 1/4´´-20 threaded holes allowing for mounting DJI RS 2/RSC 2 Quick Release Plate (Upper) with two 1/4” screws. The front of the cage features two 1/4´´-20 threaded holes for Smallrig 15mm Rod Clamp 942 that supports lens support, follow focus, matte box, etc. The cage features all-around protective rubber pads inside to prevent scratches and a built-in magnetic slotted screwdriver & Allen Wrench that is easy to use. Note: Please remove the shoulder strap ring on the right side before attaching the cage. The cage is not compatible with Nikon WR-R11 remote controller. Package Includes: 1 x Cage 8 x M3 Screw
Designed to provide the handheld solution, accessory attachment, and protection for the camera, and particularly during low-angle shooting, ease burdens on the arm and assist in camera movements. The kit comes with a Cage for Nikon Z9 (3195) and an ARRI Top Handle (2165) and maintains access to buttons, holes, card slots, battery door, and flip screen after installation. SmallRig 3738 Cage Kit For Nikon Z9 The cage is locked via a 1/4´´-20 screw at the bottom, locating pin and the shoulder strap ring on the right side. The top handle is ergonomically designed to increase comfort and allows quick assembly and disassembly. Built-in mounting points are fully compatible with the SmallRig accessory system. Featuring 1/4´´-20 threaded holes and ARRI 3/8"-16 locating holes for SmallRig Side Handle 2093 or 2426 for side handheld shooting and camera movements, and ARRI 3/8"-16 locating hole on the top of the handle for Monitor Mount 2903 and a cold shoe mount for microphones, LED lights. Arca quick release plate on the bottom of the cage fits directly on to a tripod for tripod shooting. Two 1/4´´-20 threaded holes at the bottom of the front, support SmallRig Rod Clamp 942 for attach 15mm rail support system to attach lens support, follow focus, matte box, etc. Besides, comes with protective cushions inside to prevent scratches and provides a built-in magnetic spanner for easy access. Compatibility: Nikon Z9 Note: Please remove the shoulder strap ring on the right side before attaching the cage. The cage is not compatible with Nikon WR-R11 remote controller. Package Includes: 1 x Cage 3195 8 x M3 Screw 1 x Top Handle 2165
Ette nähtud: Foto- ja videokaamerate jaoks; Pikkus kokkupandud kujul (cm): 44; Maksimaalne pikkus lahtivõetud kujul (cm): 165; Reguleeritava kõrgusega kesksammas: On; Jalgade läbimõõt (cm): Pole infot; Jalgade kummitallad: On; Sisseehitatud tase:...
Ette nähtud: Fotokaameratele; Pikkus kokkupandud kujul (cm): 39.8; Reguleeritava kõrgusega kesksammas: On; 3D mehhanism: Ei; Jalgade kummitallad: On; Sisseehitatud tase: On; Kaal (kg): 0,87; Maksimum koormus (kg): 1,5; Muud omadused: "Tripod";...
The Konus Tripod for Binoculars is made of lightweight metal and consists of 3 adjustable sections (from 65 cm to 160 cm). The mounting plate is suitable for binoculars, spotting scopes and cameras. The ball head is equipped with ...
Multifunktsionaalne statiiv; Kasuta käsistatiivi, käepideme või lauastatiivina; Ühildub nii kompaktkaamerate kui nutitelefonidega; Sobib kasutamiseks kuni 350 g seadmetega; Kerge ja kompaktne disain
Ulanzi TT35 Hiking Stick Tripod Kit 1. 5-in-1 Versatility: Use it as a trekking pole, tripod, selfie stick, monopod, or mini tripod for any adventure. 2. Lightweight and Strong: Made from high-quality aluminum alloy and carbon fiber, it supports up to 5kg while weighing only 1.16kg. 3. Quick and Stable Setup: Features a quick-release design for swift, secure transitions and easy setup. 4. Compatible with Popular Systems: Works with Arca-Swiss and F38 quick release plates for versatile camera mounting. 5. Comfort and Stability: Adjustable trekking poles with ergonomic sponge handles and wrist straps ensure comfort on any terrain.
One-Step Height Adjustment Modular Monopod with feet. Just rotate the twist lock to fast extend or retract this monopod, which makes it convenient and easy to operate. SIRUI MONOPOD SVM-145 RAPID SYSTEM Rapid One-Step Height Adjustment! SIRUI’s patent-Rapid System-is used here to save your time and energy. You can just rotate the twist lock to fast extend or retract this monopod, which makes it convenient and easy to operate. Thanks to this creation, you won’t miss any brilliant scene during fast- moving shooting. Ergonomic design twist lock with rubber pad on it allows you to tighten or loosen this lock with less effort This flexible monopod works well in fast-moving situations. Lightweight carbon fiber is added to further decrease the weight of this monopod, ideal for run-and-gun shooting Black carbon fiber and metal gray look makes it merge unobtrusively intο the background in low light situation, avoiding catching much attention of the models. The mounting plate, monopod leg and tripod base can be detached and freely combined intο a monopod, a monopod with feet or a tabletop tripod. This is a versatile tool that serves many purposes: Monopod / Monopod with feet - Suitable for daily shooting, simulating drone shooting, or situation not suitable for tripods. With Extension Rod (sold separately) - Suitable for highly mobile situations, weight distribution of telephoto lenses and travel shooting. Tabletop Tripod - Suitable for low angle shooting, tabletop shooting, close-up and handheld vlog shooting. Rapid Setup & Breakdown Automatically Lock Pull down the gray part once only to loosen and release the monopod adapter. Even heavy equipment is mounted on the adapter, it is also safe and rapid to insert the equipment without aligning carefully. And you can hold the equipment with both hands to install. Optional Extension Rod The max height of SVM145 is 145cm and the max height of SVM165 is 165cm. And if the monopod is not high enough for some cases, the optional SVM-E extension rod (sold separately) can be added to help increase the height of this monopod by 30cm, ideal for higher shooting or simulating camera crane. Moreover, this extension rod works well with Rapid System. The Extension rod is also compatible with tabletop tripod! Strong & Durable This monopod has been rigorously tested; Such as working temperature from -30℃ to 70℃, 48h parts salt spray corrosion test and 72h transportation test, pressure test, etc. The Sirui SVM monopod does do a good job, so it is your best partner even in harsh environment Recommended max load capacity: 5Kg The bottom part (Tabletop Tripod) has a ballhead with 36° all directtions tilting in any directions gives you a lot of flexibility. Retractable metal spikes are designed to meet different shooting needs Carying bag is included.
The D-Fruit 205 is a compact ang lightweight universal tripod for mirrorless cameras and small DSLRs. The tripod has a removable center column with a rubber tip underneath. The set includes a universal smartphone holder. The adapter has a cold shoe and two 1/4" threads that allow you to attach the phone to the tripod horizontally or vertically. The holder is suitable for use with phones with a width of 58–89 mm.Compact yet sturdyThe maximum working height of the tripod is 160 cm and the minimum working height is 39.5 cm, allowing you to adjust the tripod according to your needs. The tripod's 4-section aluminum legs ensure stability in any situation, and the quick-release fasteners make setting up the legs quick and easy.Built-in tripod headThe 3-way head allows you to quickly and conveniently change the shooting angle, and the convenient control lever makes moving the tripod head particularly smooth. A built-in level ensures that the tripod is always perfectly balanced.Comes with you everywhereThe tripod is so easy to carry – when folded, the length of the tripod is only 46.5 cm and it weighs just 595 g. A transport bag is also included.
Gravity GSP4722B on professionaalne käsivändaga valgusstatiiv, mis võimaldab hõlpsalt ja turvaliselt tõsta valgusseadmeid soovitud kõrgusele. Tänu vastupidavale terastorule ja kokkupandavale kolmjalgsele alusele on statiiv stabiilne ning lihtsasti transporditav. Alumiiniumist valmistatud jalgade kinnitus tagab pikaajalise vastupidavuse. Teleskooptoru fikseeritakse suure pingutusnupu ja turvatihvtiga, mis võimaldab kõrguse reguleerimist vahemikus 1,5 m kuni 2,4 m. Statiiv on TÜV/GS sertifitseeritud, mis kinnitab selle vastavust kõrgetele ohutusstandarditele. Tehnilised andmed: Minimaalne kõrgus: 1500 mm Maksimaalne kõrgus: 2400 mm Transpordipikkus: 1480 mm Toru materjal: Terastoru Toru läbimõõt: 35 mm Pinnaviimistlus: Pulbervärvitud must Maksimaalne kandevõime: 40 kg Kaal: 9,31 kg Vahetatavad rõngad: 2 x 20 mm (komplektis mustad rõngad) Sertifikaadid: TÜV/GS Omadused: Käsivända ja hammaslattmehhanismiga lihtne kõrguse reguleerimine Kokkupandav kolmjalgne alus hõlpsaks transpordiks Alumiiniumist jalgade kinnitus pikaajaliseks kasutamiseks Teleskooptoru fikseerimine suure pingutusnupu ja turvatihvtiga Komplektis vahetatavad mustad rõngad (G-Rings) Sobib kasutamiseks: Valgusseadmete, näiteks LED-paneelide, liikuvate peade ja teiste valgustite paigaldamiseks ning kõrguse reguleerimiseks lavadel, stuudiotes ja üritustel.
