Extremely light due to aluminum design. Extremely high-quality and precise 3D panhead. High stability. With bubble level. Cork-coated quick-release plate with ¼ inch camera connection. Max. Load capacity: approx. 6kg.
Velbon EX 630 F Aluminum TripodToote kirjeldus inglise keeles:The Velbon EX-630/F Aluminum Tripod With 3-Way Pan/Tilt Head is a 3.7 lb aluminum camera support with a permanently mounted three-way pan and tilt head. It can reach a maximum height of 66.1" with the geared center column fully extended, and it has a minimum working height of 24.2". This portable tripod folds down to 24.2". The EX-630/F will support a maximum of 11 lb. The camera plate turns 90° to the right for shooting in portrait mode. A QB-46 quick-release plate is included. The diameter of the tripod legs is 1.02" (26mm). A carrying case for storage and transport is included.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ette nähtud: Foto- ja videokaamerate jaoks; Pikkus kokkupandud kujul (cm): 31,5; Maksimaalne pikkus lahtivõetud kujul (cm): 138; Minimaalne kõrgus kokkupandult: 16; Reguleeritava kõrgusega kesksammas: Ei; 3D mehhanism: Ei; Jalgade läbimõõt (cm):...
High-quality and rigid Action-Grip. Ideal for tracing moving objects, e.g. Sporting events or animal watching. Quickly lockable and unlockable. High stability. Convenient quick-release plate with 1/4 inch camera connection. With two spirit levels and one bubble level. Max. Load capacity: approx. 4kg.
A versatile shooting grip, selfie stick as well as tabletop tripod for select Sony and Canon cameras featuring Bluetooth connectivity. This grip is designed to improve shooting stability, ideal for vlogging, live streaming, simple everyday use and other scenarios. Features detachable and chargeable wireless remote control can achieve camera photo, video, zoom, focus and other functions, which makes your vlog easier. The grip is extendable with two levels stretch up to 15cm for better selfie and wider view. The integrated head can tilt upward 90°, downward 90°, and rotate 360° for easier positioning. Portable size and lightweight for easy carrying. The bottom of grip comes with a 1/4”-20 threaded hole for tripod to provide wider view and help to stand when use as a selfie stick. High-strength nylon and glass fiber make it robust and durable with a payload up to 1.5kg (0.5kg when stretched). Note: Load Capacity: 1.5kg (folded as a grip or tripod); 0.5kg (extended as a selfie stick) Please do not use the grip as a tripod when extended as selfie stick. Remote control operating range: 10 meters Compatibility: Sony Cameras ZV-1 / ZV-E10 / RX100 Ⅶ / RX0 II Alpha 6100 / Alpha 6400 / Alpha 6600 Alpha 7C / Alpha 7 III / Alpha 7 IV / Alpha 7R III / Alpha 7R IV / Alpha 7S III / Alpha 9 / Alpha 9 II Canon Cameras EOS M6 Mark II / EOS M50 / EOS M50 II / EOS M200 / EOS R / EOS R5 / EOS R6 PowerShot G5X II / G7X III (Depending on the camera, the setup method for remote control shooting may differ, please refer to the instruction manual for your camera)
Ricoh Theta Stand TD-2 on Theta seeria 360° kaameratele loodud statiiv, millega saab 360° videosid ja fotosid teha ilma, et statiivijalad kaadrisse jääks. Statiivil on kokkuvolditavad jalad mugavamaks transpordiks. Statiivi minimaalne töökõrgus on kõigest 45,7 cm ja maksimaalne 150 cm, tehes sellest truu abilise 360° videosid või pilte tehes. Theta Stand TD-2 saab kasutada koos TT-1 lisaraskusega (müügil eraldi), mis lisab tuulisemates oludes statiivile stabiilsust või annab lihtsalt turvatunde.
Manfrotto tootevaliku kõige väiksem ja kergem videopea – Befree Live. See on varustatud nihutatava kiirkinnitusplaadiga, mis on ideaalne nii uusimate videokaamerate kui peegelkaamerate ja hübriidkaameratega töötamiseks. Manfrotto Befree Live saab uhkeldada eriti sujuva käsitsetavusega, võimaldades seejuures ladusat liikumist ning kallutust. Videopea juhthoob on kusjuures eemaldatav ja kokkuvolditav, et võimaldada kompaktset kaasaskandmist. Befree Live videopea on märkimisväärselt kompaktne – kaalub see kõigest 380 grammi, kuid suudab siiski kanda kuni 4-kilogrammist raskust. Lisaks on videopeaga kaasas 501PL kiirkinnitusplaat.
Pikendatud kiirkinnitusplaat RC5/Q5 süsteemidele aitab paremini tasakaalustada ebahariliku kaalujaotusega videokaameraid (teleobjektiiv või raske aku), kuna kaamera asendit plaadil on võimalik seadistada. Komplektis sisaldub kaks 1/4" ning kaks 3/8" keermega kruvi. Kummeeritud kate plaadi pinnal lisab veelgi turvalisust.
Ette nähtud: Foto- ja videokaamerate jaoks; Pikkus kokkupandud kujul (cm): 44; Maksimaalne pikkus lahtivõetud kujul (cm): 165; Reguleeritava kõrgusega kesksammas: On; Jalgade läbimõõt (cm): Pole infot; Jalgade kummitallad: On; Sisseehitatud tase:...
Multi-function mini-tripod. The little 3T series tripods are true all-rounders. They are small in size but big in versatility. Additional features include a 3T-35 ball had in matching colours. It will allow you to get your camera in place quickly and securely. The small tripod is extremely light and will accomplish any task. Whether as a hand-hold for action cams or as a table-top tripod with a system camera - it performs well in any situation.
Zelda is 3LT’s first dedicated L-Bracket. Designed, in cooperation with Nikon, to perfectly fit the shapely contours of the new Z 6 and Z 7 cameras, Zelda gives users full access to all ports and doors on the cameras. Super Strength. Zelda exquisite curves are hewn with precise accuracy from a single block of solid magnesium alloy, giving it a strength never previously found in anything outside Thor’s hammer. Sharp Styling. Anodised in stunning Copper or Metallic Slate Grey, Zelda features perfectly-aligned cut-outs that give users easy access to the tilting screen and lens release buttons on the Z Series cameras. Easy as FTZ... Because Zelda was designed in collaboration with Nikon, the dedicated accessories are 100% compatible. Both the FTZ and WR-R10 can be installed and removed without the need to remove the Bracket. Horizontal Aspect Length: 106 mm. Horizontal Aspect Width: 38 mm. Vertical Aspect Height: 85 mm. Vertical Aspect Width: 38 mm. Weight: 67 g. Compatibility – Standard Arca-Swiss.
Zelda is 3LT’s first dedicated L-Bracket. Designed, in cooperation with Nikon, to perfectly fit the shapely contours of the new Z 6 and Z 7 cameras, Zelda gives users full access to all ports and doors on the cameras. Super Strength. Zelda exquisite curves are hewn with precise accuracy from a single block of solid magnesium alloy, giving it a strength never previously found in anything outside Thor’s hammer. Sharp Styling. Anodised in stunning Copper or Metallic Slate Grey, Zelda features perfectly-aligned cut-outs that give users easy access to the tilting screen and lens release buttons on the Z Series cameras. Easy as FTZ... Because Zelda was designed in collaboration with Nikon, the dedicated accessories are 100% compatible. Both the FTZ and WR-R10 can be installed and removed without the need to remove the Bracket. Horizontal Aspect Length: 106 mm. Horizontal Aspect Width: 38 mm. Vertical Aspect Height: 85 mm. Vertical Aspect Width: 38 mm. Weight: 67 g. Compatibility – Standard Arca-Swiss.
Designed to protect the camera and attach accessories. The cage features rubber pads that prevent scratches and gives full access to buttons, card slots, flip screen, and battery door. SmallRig 3940 Cage For Nikon Z 8 Locking the camera via one bottom 1/4 "-20 screw, one locating screw, and one side lock adapter on the right Among its accessory mounting points, 1/4"-20 threaded hole, 3/8"-16 threaded hole, and ARRI 3/8"-16 locating hole support SmallRig Side Handle 2093 & 3814, Top Handle 3765, Monitor Mount 2903 & 2904, Manfrotto Plate 1280 & 2458, Holder for Portable Power Banks 2336 and mini V Mount Battery Plate 2987. The side 1/4"-20 locating hole fits SmallRig Single Rod Clamp 3598 and Magic Arm 3873, and left NATO rail quickly connects SmallRig Side Handle 3847 & 4017. Besides, there are cold shoe mounts for the microphone and LED video light, strap holes for Smallrig Hand Strap 3848 & 2456, and QD mounts for the QD strap buckle. The bottom Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for a quick switch between gimbal, handheld, and tripod modes. A double-ended wrench is also included for easy disassembly and assembly. Compatibility: Nikon Z 8 Package includes: 1x Cage
Manfrotto 577 kiirkinnitusadapter koos plaadiga on mõeldud üksjalgadele ning statiivipeadele, millel puudub kiirkinnitussüsteem. See sobib 3/8" keermega üksjalgadele ning statiivipeadele (3/8"–1/4" keermeadapteriga ka teistele süsteemidele). 577 kiirkinnitusadapter on valmistatud tugevast alumiiniumist, kaamera kinnitub adapterile 1/4" või 3/8" keermega ning kaasas olevat kiirkinnitusplaati on võimalik 20 mm ulatuses nihutada. Kiirkinnitusplaadi mudel: Manfrotto 501PL
Kompaktne kiirkinnitusplaadiga kolmesuunaline statiivipea. See tugev statiivipea on suurepärane abivahend ideaalsete kaadrite saamiseks keskmise raskusega kaameraga. See on varustatud mugavate kokkupandavate juhthoobadega, mida on võimalik transporitmise ajaks mugavalt eest ära panna. Ergonoomilised käepidemed on valmistatud spetsiaalsest kummist, mis tagab eriti mugava ja kindla haarde. Statiivipea ise on valmistatud Adaptost ehk eriti kergest polümeerist, mis tagab tugeva toe, kuid säilitab ise kerge kaalu.
MVMXPROBASE üksjala alus on disainitud FluidTech tehnoloogiaga, mis tagav veel ladusama liikumise kogule üksjalale. Niimoodi on nii pöörded kui kallutamised ülisujuvad. Tänu kokkuklapitavatele jalgadele on võimalik alus teha transpordi ajaks väga kompaktseks. Kandevõime: kuni 8 kg Materjal: alumiinium Kaal: 450 g
290 Carbon on töökindel 4-osaline üksjalg, mis on üheaegselt äärmiselt kerge ja stabiilne, tagades kaamera kindla ja värinavaba toetuse. Tänu selle 4-lülilisele konstruktsioonile on 290 Carbon'it mugav kokku panna ja kaasas kanda. Mugav käepael võimaldab statiivi turvaliselt käes hoida ning kummist ümbris annab eriti hea haarde. Vastupidavad magneesiumist kinnitusi saab pinguldada – see tagab, et üksjalga saab kindlalt kasutada kogu sele eluea. Üksjalg kinnitub hästi kaamera statiivipesasse, samuti on üksjalale võimalik kinnitada statiivipea.
Designed for quick switch between horizontal and vertical shooting. SmallRig 3714 L-Bracket For Nikon Z9 It is locked into the bottom of a camera via a 1/4"-20 screw and an anti-twist screw, fitted with a silicone pad to prevent scratches and deflection, and can be disassembled into an Arca-compatible base plate (used separately) and side plate, both with lens center mark. The L-Bracket does not block ports, buttons, card slot, battery door, and 4-axis tilting LCD screen. The base plate features mounting points such as 1/4”-20, 3/8"-16 threaded holes and wrist strap support to attach SmallRig Quick Release Plate 1280 and the quick-release plate (pad) of DJI RS 2/RSC 2 stabilizers to realize quick switching multiple scenes such as tripod and stabilizer. Extendable side plate featuring two 1/4"-20 threaded holes supports SmallRig Cold Shoe Mount 1593 and 2736 to attach microphone and leaves room for HDMI and USB cables. In addition, a slotted screwdriver is accessible for easy disassembly and assembly. Note: To stretch the L-Bracket, you need to remove an anti-twist screw with the built-in flat-head spanner; Compatibility: Nikon Z 9 Includes: 1 x base plate 1 x side plate 2 x M4 screws 1 x Allen Wrench
Ideal for video filming. Two-way fluid head offers horizontal pan and vertical tilt action with the control handle. Usable with all video camera models and in all shooting conditions in horizontal mode. Smooth panning and tilting action while stopper screws are unlocked. Once the position is fixed, just release handle and lock stoppers with a soft touch. This will be enough to stop and move for panning and tilting. Velbon´s fluid heads comes with traditional aluminium tripods. Tripod carrying case is included. Max loading weight: 3kg 2-way panorama head PH-368 and geared elevator Quick release plate: QB-6RL
Operating height (max): 153 Operating height (min): 44.5 Length of the complex stand: 47 Maximum diameter of the legs: 20 Load (max): 2 Weight: 1.18 Other features: - Leg Lock Type: levers - Quick: QB-46
Kerge alumiiniumjalgadega statiiv, millel on integreeritud ühe juhthoovaga videopea. Kesksammas vändaga tõstetav. Hea valik fotograafile, kes soovib kerget ning kompaktsemat statiivi väiksemale peegelkaamerale või videokaamerale, kuid ei soovi süsinikfiibrist statiivi investeerida.Nimi VELBON on üle 50 aasta olnud liider statiivide väljatöötamise ja tootmise alal. Velbon on suurim statiivide tootmisele spetsialiseerunud ettevõte ja pakub kvaliteetset tootevalikut nii algajale, tõsisele harrastajale kui ka professionaalile. Kas vajad statiivi peegelkaamerale, keskformaatkaamerale, digikompaktile, videokaamerale, binoklile või vaatetorule - Velboni valikust leiad alati sobiva kvaliteetse mudeli.
ZHIYUN Smooth Q3. Driven by the fascinating art and the advanced intelligent interaction, Smooth Q3 announces a comeback of a classic, offering a smarter experience in shooting. With SMOOTH-Q3, a smartphone is all you need to make a great work of art with amazing effects. Key Features Compact sliding design 3-axis mobile stabilizer Build-in LED fill light, 3 level brightness, 180 degree horizontally rotatable One button portrait mode Live streaming enabled for all platforms via the app Fascinating effects in the companion app: Multiple "You", subject tracking, gesture control, panorama, time lapse, motion lapse, Dolly Zoom, etc.. Easy video editing in the app: amazing templates, music, special effects and filters. Key specifications New compact design Better grip, single hand control Better payload Easy to fold Creative templates Extra light (340g)
Manfrotto statiiv 1052BAC on mugava QSS (Quick Stand System) süsteemiga alumiiniumstatiiv. Õhkvedrustusega, mis kaitseb statiivile paigaldatud fotoseadmeid. Maksimaalne kõrgus kuni 2,3m.
Ülikompaktne stabilisaator nutitelefonidele Toetab vertikaalset videoformaati (näiteks Instagrami story jaoks) Telefonihoidikusse mahuvad ka suured telefonid Quick Release telefoni kiireks kinnitamiseks stabilisaatorile Suur multifunktsionaalne nupp stabilisaatori juhtimiseks Eriefektid foto ja videovõtete mitmekesistamiseks ZY Play rakendus (võimaldab objekti jälgimist, aeg- ning panoraamvõtteid) Kuni 17 tundi tööaega ühe laadimisega Kasutatav akupangana telefoni laadimiseks Väike aga võimas – uus kolmeteljeline stabilisaator Zhiyun Smooth Q2 pakub tervet rida uusi võimalusi mobiilidega videosalvestuseks. Tänu kompaktsusele ja kuni 17 tundi kestvale akule on tegemist ideaalse tööriistaga vlogger´itele ja YouTuber´itele! Kiirelt kasutusvalmis Zhiyun Smooth Q2 sobib kasutamiseks enamike kasutusel olevate nutitelefonidega. Nende hulka kuuluvad ka suured tippklassi mudelid, nagu näiteks iPhone 11 Pro Max ja Samsung Galaxy S10 Plus. Telefonihoidikusse saab panna kuni 85 mm laiuse telefoni ning keerata telefoni püsti juhuks, kui soovite salvestada püstformaadis video näiteks Instagrami jaoks. Tänu nutikale kiirvabastussüsteemile saate telefoni hetkega stabilisaatorile kinnitada või sellelt eemaldada. Mobiilne videosalvestus uuele tasemele ZY Play nutirakenduse kasutamine avab ligipääsu mitmele Zhiyun Smooth Q2 funktsioonile, mis aitavad teie videojäädvustused tõsta täiesti uuele tasemele. Following Mode stabiliseerib värisemist, kuid võimaldab suuremat liikumist ning seetõttu saate jäädvustatava ettearvamatut liikumist telefoniga paremini salvestada. Pan Following Mode seevastu hoiab jällegi kogu liikumise ajal silmapiiri horisontaalsena. Lock Mode lukustab stabilisaatori soovitud suunale nii, et olenemata teie liikumisest on kaamera alati suunatud soovitud objektile. Full Range POV Mode võimaldab kaamera igas suunas liikumist, sh kallutamist ning annab seetõttu eriti hästi edasi seiklusliku teekonna. Vortex Mode lisab tegevust jäädvustavatele stseenidele uue mõõtme, võimaldades pöörelda 360-kraadi ulatuses ümber kaamera telje. Smooth Q2 eriefektide valikust leiame ka aegvõtte ning panoraamfoto võimalused. Filmilike eriefektide valikust toome esile Dolly Zoom ehk Vertigo efekti, millega saab telefoni kaamera suumi kasutades luua Hollywoodi filmidest nähtud dramaatilisi eemaldumisi subjektist. Akut jätkub kogu päevaks Smooth Q2 võimas liitium-ioon aku võimaldab stabilisaatorit kasutada ühe laadimisega kuni 17 tundi. Laadimine on kiire ning vaid kolme tunniga on stabilisaator valmis uuteks väljakutseteks. Stabilisaatorit saate kasutada ka toiteallikana teie telefonile ning olla kindlad, et salvestus ei jää poolikuks telefoni tühjenemise tõttu.
Joby GorillaPod 3K Pro on ideaalne kaaslane professionaaltasemel hübriidkaameratele. Statiivi uus disain hõlmab patenteeritud metallist kuulpesade tehnoloogiat, mis tagab enneolematu vastupidavuse ja stabiilsuse. GorillaPod 3K Pro sobib truuks seltsiliseks nii fotograafidele, vlogijatele kui ajakirjanikele – seda saab kasutada nii tavalise statiivi kui käsistatiivina. Statiivi painduv disain võimaldab GorillaPodi jalad mässida torude jms esemete ümber ning sättida statiiv hõlpsalt ka ebatasasele pinnale. GorillaPod 3K Pro sobib kuni 3 kg kaaluvatele kaameratele. Loodud professionaaltasemel hübriidkaameratele Patenteeritud metallist kuulpesade konstruktsioon, mis on vastupidavam kui varem Kannab kuni 3 kg suurust raskust
