Välgud ja lisad

Elinchrom Modelling Lamp 230V/300W

Panasonic distantspäästik DMW-RS2E Cable Remote Trigger for S1 and S1R

Godox TT-350 on kaamerapealne E-TTL II funktsiooniga strobistivälk. Godoxi TT-350 loomisel on eeskätt silmas peetud canoni hübriidkaamera kasutajat. Võimalik kasutada nii Põhivälguna kasutades suudab suhelda ka teiste godoxi ...

Godox AD-S7 Multifunctional Softbox Diffuser Set for AD200 AD180 AD360 II Flashes. Weight: 280g. Dimensions: 70cm x 41cm x 38cm. Dimension: 480mm. Fits only Godox WITSTRO flash units AD180 / AD360 / AD360II-C / AD360II-N / AD200.

Godox EC200 Extension Cable for AD200/AD200Pro Flash Head. EC200, the 185cm extension cable, fits AD200 and AD200Pro lamps. Extension Cable designed for the AD200 pocket flash. One of its ends attaches to the battery pack and connects to the actual flash head via 185cm long cable, allowing you to easily rig it to a stand or simply hold it in your hand and move it around between shots. Push a locking button on the side to allow the head to tilt upwards 90 degrees. At the bottom, a cold accessory foot can be used for mounting onto a camera hot shoe, while a 1/4"-20 thread in the middle of the foot allows attachment to compatible stands or tripods. Usage of the EC200 helps moves the weight from top to bottom of stands and boom poles, makes shooting outdoors a lot easier and less prone to wind blowing or fatigue from holding/carrying heavy lights.

Godox AD1200PRO TTL is the first portаble flash system in AD family, in which the flash head is separated and the power module is equipped with batteries. The lamp works great both in the studio and outdoors. The battery in the power module (5200 mAh) is replaceable. The battery should last for approximately 500 full-power flashes. AD1200PRO TTL works with the Godox X wireless system. It offers the possibility of dividing into 5 groups and 32 channels as well as TTL and HSS support. Godox AD1200Pro The kit includes a 1200Ws flash, power pack (5200 mAh battery) and accessories. Godox studio flash, can work with cameras in the automatic TTL flash light metering mode. This allows you to capture scenes with dynamically changing lighting conditions, both in the studio and outdoor. High Power The maximum flash power is 1200Ws with the possibility of extremely wide adjustment in the range of 8 aperture stops (1/1 - 1/256) - this allows you to adjust the flash output to almost any subject. The lamp is powered by a battery and does not need to be connected to the AC\wall adapter, which facilitates its versatile use outside the photo studio. The ability to sync flash with high shutter speeds allows you to use large apertures and shallow depth of field also in strong ambient light. System X Godox AD1200Pro lamp is equipped with a built-in System X radio control system receiver. Thanks to this solution, there is no need to connect additional radio receivers to the lamp. It is also possible to use a 3.5mm jack socket and use it with another type of remote trigger. Long-lasting Battery The lamp is powered by a 5200mAh battery. When fully charged, it is sufficient for up to 500 flashes at full power. The battery can be replaced, which allows you to work freely even away from power sources. It is also possible to buy additional batteries, including those that can be transported on board the plane (capacity 2600 mAh). Color control The flash light has a temperature of 5600 K. The standard deviation of its color reaches +/- 200 K, but the lamp can be switched to the stаble color temperature mode, in which the deviations drop to +/- 75K. In addition to the flash, we find a 40-watt LED modeling light. Bowens The lamp can be used with a wide range of light modifiers such as: dishes, softboxes and umbrellas thanks to the attachment of Bowens accessories. The tripod mount allows you to adjust the angle of the lamp and can be used with almost all studio tripods. Advanced Features Extremely short flash durations up to 1 / 10860s (t0.1, at 1/256 of power) and stаble color temperature of the flash (5600K ± 200K) (in stаble temperature mode ± 75K). Modeling Light LED modeling lighting, active cooling (built-in fan) equipped with a Bowens accessory mount In the box: - Godox AD1200Pro TTL Flash - Power Pack - 5200mAh Battery - 3,65m cable - Charger - Reflector - Glass lamp Cover - Rolling Case - Carrying Case - Power Cable

Battery Charger for Godox AD1200PRO is for recharging the lithium-ion battery packs used to power the AD1200 Pro Battery Powered Flash System. Can charge lithium-ion batteries, both the 520mAh WB1200H and its little brother WB1200 with a capacity of 2600mAh, thanks to the C1200P charger for AD1200Pro, they can be charged anywhere. The charger works worldwide at 100-240V AC and is compatible with both types of lithium cells available.

NANLITE T12 Tube Holder With Mini Ball Head. In the packaging: HD-T12+BH - 1 pc.

Quadralite Stroboss VB-18 – battery for V860II

Godox X1 välguvastuvõtja (Nikonile). Godox X1R juhtmevaba TTL vastuvõtja Nikonile. Tänu sisseehitatud 2.4G vastuvõtjale on maksimaalne töökaugus kuni 100m. Toetab täielikult Nikoni i-TTL automaatvälgu reziimi, ning High speed sünkroniseerimine kuni 1/8000 sek. Tänu 32 kanalile 5 grupis, ning 99 erinevale ID koodile saab välke kasutada segamatult. Godox X1R-N 2.4G Wireless Receiver Flash Trigger Single Receiver for Nikon DSLR Camera (X1R-N Receiver). 2.4G wireless transmission, 32 channels, support up to 1/8000s HSS function. Featuring multi-channel triggering, stable signal transmission, and sensitive reaction. Provides up to 100 meters further transmission distance and creative triggering methods. Use with X1T-N transmitter (sold separately) to trigger camera flash which support Nikon i-TTL autoflash (Note: Please set your flash to TTL mode). The receiver equips with big LCD panel to offer convenient operation.

Power, speed, and integrated radio transmission make the Ving V860III TTL Li-Ion Flash Kit from Godox a hard-to-beat option for your Pentax cameras. Fully compatible with TTL systems, the Ving V860III supports many advanced functions and features.

Ühildub kaameratega: Fujifilm; Tüüp: Standard; Ekspositsiooni kontroll: TTL; Vooluallikas: Aku; Kaal (ilma toiteallikata): 41; Garantii füüsilistele isikutele: 2 aastat; Garantii juriidilistele isikutele: 1 aasta

Godox AD-AC Power Source Adapter Unit with 5M Cable for Godox AD600 AD600M AD600B AD600BM Flashpoint XPLOR 600 Flash

Godox SA-17 Bowens Mount to S30 Mount Adapter. This Godox adapter for Bowens-mount LED lights to Projection Attachment, with its solid construction, allows you to use Godox SA-P Projection attachment with any of your Bowens-mount LED Lights for achieving a greater degree of control with your light. The adapter allows COB Bowens-mount LED lights users to release their boundless creativity by matching with SA-P projection attachment to achieve their desired effects. For users who already own S30 focusing light, now they can go beyond S30 and use the adapter to serve for a broader range of Bowens-mount LED lights. Equipped with built-in optical lens, the adapter provides excellent optical performance, asurring light output that´s even from edge to edge. Since other accessories of Godox S30 are compatible with SA-P projection attachment, via SA-17 adapter, you now have the access to the following light shaping accessories and accomplish the precision lighting and creative light effect with your own Bownes-mount lights. Giving the ability to project a controlled light beam, with three options of the aspheric optical lens.The projection attachment with lens is an optical modifier that allows the light to project a de-focused soft circle or a focused hard circle of light.

GODOX FTR-16P on raadiovastuvõtja stuudiovälklampide jaoks. Vaja on ka vastavat saatjat. The Godox FTR-16P Receiver is a wireless receiver for flash heads equipped with a 3.5mm jack trigger connection. The FTR-16P is a very economical and easy way to trigger your flash. The receiver is powered by two optional AAA batteries. Characteristics 3.5mm jack trigger connection Power supply: 2 x AA batteries

XTR-16 of USB connector wireless power-control flash receiver is designed with 2.4G wireless X-system. Transmitter Trigger for Wistro AD360/DE/QT/DP/QS/GS/GT Series

The Nanlite Mini Ball Head with Hot Shoe Adapter securely slides into your camera´s hot shoe and also offers a female 1/4"-20 receiver for stand mounting. At the top is a single action locking ball head with a 1/4"-20 male thread that is compatible with a variety of accessories. Compatible with: PavoTube II 6C, LitoLite 5C.

The Phottix Raja series opens like an umbrella and is ready to use in seconds. No anxiety. No frustration. Pop it open, add the ba­ffle, diffuser and grid – mount on your studio light. Simple! Softboxes are a must-have light shaper. Want to harness light, bend it to your will and make it your servant? Nothing is better than a softbox. They provide for countless looks and possibilities – making your photographic potential limitless. The Phottix Raja Quick-Folding Octa Softboxes come in two sizes: 60cm and 80cm. Deep Octa Softboxes are loved by professional photographers – and for good reason: They produce a more directional light with greater contrast than traditional softboxes – with more even illumination. They are versatile – offering different looks by adding or subtracting the baffle and or diffuser. The Phottix Raja Quick-Folding Softboxes come with a Phottix-compatible S-Mount (Bowens). Swappable mounts for Elinchrom and Profoto are available (sold separately) The Phottix Raja series features Heavy-duty construction Uses Phottix’s Heat resistant SL Tech material Easy to assemble 5 sizes and styles Swappable speed rings for popular lighting brands Travel Bag included What’s Included Softbox Raja Deep Octa 60cm with Phottix-compatible S Mount Inner Baffle Outer Diffuser Fabric Grid Carrying Bag

Godox X2T ühildub täielikult spetsiaalsete kaamerate TTL automaatse välklambi mõõtmisega, samuti tagab see täieliku kontrolli välgu võimsuse üle käsitsi (M) ja strobe (Multi) režiimides.; Mõlemal juhul saab kasutaja kasutada välgu ...

Godox X2T ühildub täielikult spetsiaalsete kaamerate TTL automaatse välklambi mõõtmisega, samuti tagab see täieliku kontrolli välgu võimsuse üle käsitsi (M) ja strobe (Multi) režiimides.; Mõlemal juhul saab kasutaja kasutada välgu ...

Godox Power Remote Control XTR-16S sobib suhtlemiseks X1 seeria ja V860 seeria saatjatega. Ultilizing build-in Godox X-system, the X1R-16S receiver can adjust flash power level as well as triggering with X1 series TTL flash Transmitter Using XT series receiver and X1 series transmitter, TTL flashes and Non-TTL flashes can be used in combination, which offers great convenience and bette light distribution for photographers When use XT series Receiver in combination with X1 series Transmitter, pleas set the X1 transmitter to M mode XTR16/ XTR16S Can´t receive the parameters that emitted by the Transmitter in TTL and Multi modes Fit Flashes: Godox Ving camera flashes

Flashtube for Godox AD600Pro.

Godox Witstro Handgreep With this Godox Witstro Handgrip you can use your Witstro AD180 or AD360 flash by hand for flexible and creative flashing. You can also quickly and easily attach the flash including the handle to a tripod. Due to its small and compact dimensions, the handle is easy to carry. Characteristics: Flexible and creative flash from hand Simple attachment Anti-slip top Reliable and easy to use Can also be placed on a tripod including handle Dimensions: 12.8x5x3.5cm Weight: 120 gram

Caruba Spirit Level 3-way Hot shoe. The handy Caruba Spirit Level 3-way Hot shoe can be placed on the hot shoe connection of your camera! Attach the spirit level to the hot shoe connection and you are ready to shoot. This indispensable accessory is affordable and is a real solution for those who photograph landscapes or architecture. A spirit level is also much more precise than the fine lines of your viewfinder. And it takes up almost no space in your bag! Note: This spirit level is only suitable for Sony camera´s.

The Godox Battery for V1Pro VB30 is a rechargeable lithium-ion battery suitable for the V1pro flash unit. The battery has a rated voltage of 7.2V and 2980mAh. Photograph on the go without compromising efficiency or the environment. Highlights Rechargeable Voltage of 7.2V and 2980mAh Characteristics: Rechargeable Built-in Lithium Battery: 7.2V/2980mAh

Godox 7" Honey Comb Grid for standard Reflector. The Godox C-02 Honey Comb Grid is suitable for the Godox Standard Reflector 7" Bowens mount. The honeycomb narrows the light beam and reduces stray light. Use the grid to highlight your model and contour his or her face.

Godox TT685II/V860III - white diffuser front cover

Professioneller Blitz, Leitzahl 46, High-Speed-Synchronisierung, kabellose Funksteuerung, starke Ausleuchtung, Quick Shift Bounce, staub- und feuchtigkeitsresistentes Design, Gewicht ca. 317g.

The Caruba Lantern Softbox is perfect for creating soft and even light that spreads in all direction. With a 270° beam angle, the softbox is perfect to use for video recording, live streaming and film making. Equipped with a Bowens mount, the Lantern is compatible with any Bowens mount. The Caruba Lantern is easy to set up, making it a quick solution on stage or on location. For further control, Caruba provides a 4 sections skirt (sold separately) that helps you to avoid unwanted bouncing light. The Softbox is delivered in her handy carrying bag. Characteristics Beam spread angle of 270° Bowens mount Fast, simple setup Optional skirts for beam spread control In the box Caruba Collapsible Lantern Softbox Carry Case

Godox VB26B aku V1 ja V860III välkudele (2980 mAh 21.45 Wh) sobib nii Quadralite kui ka Godox V1 välkudele Lithium-ion battery designed for Godox V1S / V1C / V1N / V1F / V1O / V1P flash units. The battery has a capacity of 2600 mAh and a constant voltage of 7.2 V. The long-lasting design allows for multiple charging. Can be used as a backup battery for Godox V1 flash. Power reserve The Godox VB26B battery is very useful as an additional battery in the event that the battery supplied with the lamp does not provide enough flashes during the session. Technical data: - Compatible models: Godox flash V1S / V1C / V1N / V1F / V1O / V1P - Capacity: 2980 mAh 21.45 Wh - Voltage: 7.2V

Godox Lux Elf Retro Camera Flash. Keep it easy! Embark on a carefree journey with Lux Elf, your perfect companion for capturing live moments. Light as a cloud, this pocket-sized camera flash adds flexibility to your shooting on-the-go. Cherish the call of heart, grab your Lux Elf and go for an exploration! Stylishly Compact. Ultra Sleek designed, Lux Elf strikes a perfect balance between minimalism and functionality. Compact and stylish, it’s the ideal accessory for your photography adventures. Easy Setup. With a single contact point hotshoe, Lux Elf is compatible with all camera brands. Simply plug it in and enjoy a hassle-free experience, focusing on capturing the perfect shot. Anytime, Anywhere. Incredibly compact and lightweight, Lux Elf fits in your pocket or handbag without taking up much space. Capture spontaneous moments with ease, wherever you are. Preserve Your Moments. Ideal for capturing ordinary moments and transforming them into cherished memories, Lux Elf is your go-to companion for exploring the world. Whether you’re out on a hike, traveling to new destinations, or simply enjoying a day out, Lux Elf helps you capture the magic of the moment with ease. Tailored Brightness. Simplify your photography with Lux Elf’s easy-to-use power adjust dial, offering five different power steps (1/16-1/1) for perfect shots every time. Natural Glow. Lux Elf provides natural lighting effects for your photography, enhancing your images with a soft, natural glow. Full of Energy. Stay creative for longer with Lux Elf’s built-in 7.4V 350mAh lithium battery, offering up to 400 flashes at full power and convenient charging via the type-c port. Attention! No TTL! What´s in the box? Retro Camera Flash ×1 USB-C Charging Cord ×1 Storage Bag x1

Viltrox BP-V150 10050mAh V-Mount Lithium Battery The Viltrox BP-V150 10050mAh V-Mount Lithium Battery has a capacity of 150Wh and is bi-directional PD65W. This makes it an excellent choice for supplying power to various electronic devices such as cell phones, laptops, cameras, etc. It has multiple power output solutions suitable for different situations. Moreover, the battery has an LCD display that allows you to check the remaining current and voltage in real time. This is especially useful to know when you need to recharge the battery. In short, the Viltrox BV-150 V-Mount Lithium Battery is a reliable and versatile power source for all kinds of electronic devices. Characteristics Model:BP-V150 Capacity:150Wh mA:10050mAh/14.8V Type-C input/output:5V/3A;9V/3A;12V/3A;15V/3A;20V/2.25A USB output: 5V/3A;9V/2A;12V/1.5A D-TAP input:16.8V/7A D-TAP output: 16.8-11V/14A Dimensions: 67 x 73 x 115mm Weight: 730g 2 years warranty In the box 1 x Viltrox BP-V150 10050Mah V-Mount Lithium Battery

Navigator X2 S trigger is the ultimate controller for all Quadralite X wireless system devices. Thanks to its large backlit dot matrix LCD screen the User can control up to 5 flash groups simultaneously including their zoom function, flash exposure compensaton and modeling light status. The device is equipped with a sеt of five direct action buttons to make work with a multi-light sеtup easy, fast and comfortable. Ergonomically located control dial ensures precise control over flash power output and other major functons. Built in AF assist light supports camera´s auto-focus adjustment which can be compromised in poor lighting conditions. Navigator X2 S is fully compatible with Sony MIS automatic TTL flash light metering system and can be used with all Quadralite TTL-capable flashes. Furthermore it can control lights in manual mode (M) and Multi (stroboscopic) modes as well. The User can sеt flash exposure compensation or adjust flash energy output manually. High-Speed Sync and Second Curtain Sync are also supported. The device is equipped with a USB Type-C port for firmware updates and runs on two AA bateries for convenience. Main features: compatble with Sony MIS automatc TTL flash light metering system ultimate radio controller for all Quadralite X wireless system devices 2.4 GHz wireless transmission ensures stable work on longer distances both in studio and on location (up to 100m) 32 communication channels and 16 groups for fast configuration and control over many lights TCM function ensures fast conversion of TTL sеttings to Manual values for exposure accuracy AF assist helps to adjust focus distance in poor light conditons large backlit LCD screen can display 5 groups sеttings simultaneously HSS (High Speed Sync) up to 1/8000 firmware update is possible through built-in USB-C Type port

Retro stiil kohtub kaasaegse disainiga. Ajatu elegants põimub tipptasemel tehnoloogiaga Godox Lux Master Retro kaamera välklambis (must), mis on uusim täiendus Lux-seeria retrostiilis välklampidele. Klassikalise kokkupandava lehvik-reflektori ja tõhusa värvilise puutetundliku ekraaniga ühendab Lux Master nostalgiast inspireeritud sooja valguse tänapäeva tehnoloogiliste mugavustega. Olulisemad omadused: Mugav juhtmevaba sünkroonimine TTL-valgustuse tugi Mitmekülgsed päästikuvõimalused Reguleeritava kaldenurgaga välgupea Värviline ja intuitiivne puutetundlik ekraan Täiustatud valguskontroll värvilise puutetundliku ekraaniga Lux Masteri värviline puutetundlik ekraan võimaldab hõlpsalt režiimide vahel vahetada ja seadistusi muuta – piisab vaid kiirest nipsamisest või puudutusest. Ergonoomiline disain teeb kasutamise sujuvaks ja mugavaks isegi ühe käega, pakkudes ajatut elegantsi koos tänapäevase kasutusmugavusega. Juhtmevaba sünkroonimine lihtsalt ja tõhusalt. Lux Master töötab laitmatult koos päästikutega, nagu X3, XproII ja X2T. X3 päästikuga ühendamine on imelihtne – vajuta lihtsalt päästikul juhtmevaba sünkroonimise nuppu ja välgul sünkroonimise ikooni, ning seadmed ongi ühendatud. See on kogemus, mis ühendab lihtsuse ja elegantsi ajastust, mil stiil ja funktsionaalsus käisid käsikäes. TTL-valgustuse tugi Hoolimata retrovälimusest on Lux Master varustatud kaasaegse TTL-automaatvälgu toega, mis tagab kiire ja täpse valguse seadistamise. Lisaks toetab see strobovälku, ees- ja tagakardina sünkroonimist ning kiire sünkroonimise funktsiooni. Mitmekülgsed päästikuvõimalused Sisseehitatud 2,4G juhtmevaba vastuvõtja võimaldab Lux Masteril töötada koos Godoxi Wireless X süsteemi välkudega. Seda saab kasutada ka peamise välguga, näiteks V1Pro, või filmikaamerate puhul koos valikulise automaatanduriga, mis tagab sujuva ühenduse kaamera ja välgu vahel ning järjepideva valgustuse. Reguleeritava kaldenurgaga välgupea Lux Master sobib suurepäraselt fotograafidele, kes soovivad saavutada valguse peegeldusefekte. Kaldenurka saab reguleerida 0–90 kraadi ulatuses, võimaldades täpset seadistamist, et saavutada loomulik ja professionaalne tulemus. Tõhus ja võimas Sisseehitatud 7,2 V liitiumaku võimaldab välgul teha kuni 460 täisvõimsusel sähvatust. USB-C laadimisport muudab laadimise kiireks ja mugavaks – aku täislaadimiseks kulub vaid umbes kaks tundi. Mitmekülgsed lisatarvikud Lux Master toetab vahetatavaid reflekroreid, mis annavad valgustusele lisavõimalusi. Automaatrežiimis saab reflektori ikoonile vajutades valida nelja reflektoritüübi vahel ja kohandada vastavaid seadistusi, näiteks ava ja ISO-d. Tehnilised andmed: Mudel: Lux Master Välgujõudlus (GN, 1/1 samm): GN25 (ISO100, meetrites) Aku: DC7.2V, 2980mAh, 21.456Wh Sisend: 5V⎓2A Laadimisaeg: ≈2h (5V/2A) Välgupea värvitemperatuur: 6000K±300K Võimsuse reguleerimine: 1/1–1/256 (+0.1 sammuga) Automaatne režiim: F2.8 ja ISO100 Fotoandur: S1 / S2 2.4G juhtmevabad kanalid: 1–32 Juhtmevabad grupid: A, B, C, D, E Sünkroonimisrežiimid: eesmine ja tagumine kardina sünkroonimine, kiire sünkroonimine (vajab eraldi päästikut) Välgupea pöördenurk: 0°–90° (30° sammuga) Taaslaadimisaeg (1/1 samm): ≈1,8 s Mõõtmed (reflektoriga): ≈14 x 26 x 10 cm Kaal (reflektoriga): ≈470 g Komplekt sisaldab: Godox Lux Master Retro kaamera välklamp (must) Lehvik-reflektor LM-R27 Kaamera välguklamber FB01 Sünkroonimiskaabel Laadimiskaabel Kaitsekate välgu torule Hoiustamiskott

Create every beam, perfect every scene! Designed to give you total control over every beam, the Godox KNOWLED MS60R RGB LED Light excels at shaping light with remarkable precision, whether you´re creating subtle highlights or dramatic shadows. With 91% Rec.2020 colour coverage, it offers vivid, lifelike colours for cinematic quality in every scene. It is built for flexibility, with a removable quick-charge battery for shooting on the go and a compact, high-efficiency GaN adapter that is lighter, smaller and faster than ever. With an E27 adapter, it turns into a downlight, spotlight or stage light in seconds! Supported by the Godox Optical Ecosystem, the MS60R offers a full range of light-shaping accessories to meet the creative needs of any professional. With CRMX wireless control and NFC multi-light pairing, you light smarter, faster and better. Highlights Slim cylindrical design Highly flexible power supply solution Optical Ecosystem-Micro-optical accessories capabilities CRMX integration for seamless control Highly flexible power supply solution The MS60 series offers versatile power options, including a fast-charging, removable battery for outdoor and mobile use. It also features the latest third-generation GaN semiconductors in the all-in-one detachable power adapter, which offers higher power conversion efficiency in a more compact design - no more hassle with separate adapters. With the adapter, you just need to connect the 8-shaped power cable or use the E27 socket adapter for a seamless power supply. This way, you effortlessly integrate the MS60R into any scene as downlights, spotlights or stage lighting. CRMX integration for seamless control Equipped with a LumenRadio chip, the MS60 supports CRMX wireless control via a control console or the Godox KNOWLED App, ensuring stаble performance in complex multi-light setups. In addition, NFC integration with the Godox Light app streamlines the lighting experience. Create any beam Featuring Godox´s leading optical ecosystem, the MS60 series offers precise light control such as softening, focusing, diffusing, amplifying, cropping and reshaping beams, meeting diverse professional lighting needs with remarkable adaptability. Multiple kit options with versatile accessories The MS60 comes in a 2-lamp kit and a 4-lamp kit, with a range of accessories and a customised flight case. The durable case protects the lamp and accessories, with a smart, layered design to maximise storage space for easy transport. Godox Optical Ecosystem-Light Enhancement Accessories Lens Reflector The lens reflector features Godox´s new optical design, compact and efficient, delivering up to 10 times the brightness compared to bare light. DL5 Lite parallel beam amplifier Paired with the SZL2 zoom lens, the DL5 Lite Parallel Beam Booster provides a beam angle of 5° and increases brightness by about 50 times. Lightweight and foldable, so easy to store and adapt to different shapes. Beam light S20 Offers a beam angle of 5°, increasing brightness by 40 times and significantly increasing the projection distance. Godox Optical Ecosystem-Micro-optical lens accessories Magnetic kit The magnetic kit features Godox´s micro-optical design and works with lens reflectors to control the light area and diffusion angle. Godox Optical Ecosystem-Diffusion Accessories SD15 foldable diffusion dome With 3 shapes for different soft light effects, made of durable, shock-resistant silicone material. Godox Mini projection attachments SP36/50K Projection attachments Compact design with interchangeable lenses, 360° rotatаble body, allows a wide range of lighting effects. Characteristics Model: MS60R Lithium parameters: DC 14.4V, 3300mAh, 47.52Wh; USB-C input: 5V⎓3A, 9V⎓3A, 12V⎓2.5A, 20V⎓1.5A Light USB-C Port Input: 20V⎓3A Max. 60W CCT: 1800K-10000K Brightness range: 0%-100% Dim curves: linear, S-curve, exponential, logarithmic FX mode: 14 CRI: Average≥95 TLCI: Average≥95 Control methods: DMX 512 controller, support RDM protocol/ LumenRadio CRMX Bluetooth app control Bluetooth Controlling Distance: 60m Working Environment Temperature: -20°C ~ 40°C Dimensions (without lens reflector and battery): ≈ 7.7 x 7.7 x 9.09 cm Weight (without lens reflector and battery): 311g In the box 1 x Godox KNOWLED MS60R RGB LED Light 1 x Lens reflector 1 x Battery MS60BAT01 1 x Metal holder bracket 1 x USB-C charging cord (80cm) 1 x Storage bag

Godox AD200Pro II TTL välklamp on loodud neile, kes soovivad tipptasemel valgustust, mis ei sea loovusele piire. See võimas ja kompaktne välklamp ühilduvuse ja jõudluse tippklass pakub kõike, mida vajad professionaalseteks võteteks. Godox AD200Pro II sisaldab järgmise põlvkonna H200J II ja H200 II välklambi peasid, millede kahevärviline modelleerimisvalgus tagab täpsed värvilahendused igas valguses. Tänu stabiilsele värvitemperatuurile (5800 ±200K) ja täiustatud soojuse juhtimissüsteemile saad pildistada pikalt maksimaalsel võimsusel ilma ülekuumenemiseta. Lisaks on sellel juhtmevaba ühilduvus Canon, Nikon, Sony, Fujifilm ja paljude teiste kaamerabrändidega, muutes selle ideaalseks tööriistaks igale professionaalile. Kujutle, kuidas saad hõlpsalt hallata mitme valgusallika seadistusi tänu rühmade värviindikaatoritele ja Godox X3 päästiku ühe nupuvajutusega sidumisele. Uued eredamad modelleerimislambid ei ole ainult abiks valgustuse seadistamisel, vaid toimivad ka kaasaskantava LED-valgusena lühifilmide tegemiseks. Täiustatud ekraan ja lihtne juhtimine võimaldavad sul saavutada täpseid tulemusi igas olukorras. Ära lase sellel võimalusel mööda minna! Vali Godox AD200Pro II TTL välklamp, et kogeda professionaalse valgustuse mitmekülgsust ja kvaliteeti igas projektis. Küsi lisa või telli juba täna, et viia oma töö järgmisele tasemele! Komplekti kuulub: Godox AD200Pro II välklamp H200 II välgupäid H200J II välgupäid Välgu toru AD-E2 kinnitus Liitiumaku ja laadija USB-kaabel kott Godox AD200Pro II TTL välklamp Spetsifikatsioon: Juhtmevaba režiim (ühilduv Canon E-TTL II, Nikon i-TTL, Sony, Olympus, Panasonic, Fujifilm jt süsteemidega). Välgu režiim: Juhtmevaba: M/Multi Juhtmevaba vastuvõtja režiim: TTL/M/Multi Juhtarv (1/1 võimsusaste): Speedlite välgupäid H200 II: GN52 (m, ISO 100, @35mm) Palja välgu toru H200J II: GN60 (m, ISO 100, koos reflektoriga AD-S2, @28mm) Välgu kestus (t0.1, ligikaudu): Speedlite välgupäid H200 II: 1/272s kuni 1/23500s Palja välgu toru H200J II: 1/252s kuni 1/16200s Võimsus (1/1 võimsusaste): 200Ws Võimsuse reguleerimine: 10 astet: 1/512 kuni 1/1 (0,1-astmeline täpsus) Stroboskoopiline välk: Toetatud (kuni 90 korda, 99Hz) FEC: Reguleeritav 2.4G kaugjuhtimispuldist Sünkroonimisrežiim: Kõrgsagedussünkroon (kuni 1/8000 sekundit), esimese kardina sünkroon, teise kardina sünkroon Viivitusega välk: 0,01–30 s Mask: √ Ventilaator: √ Helisignaal (Beep): √ Välgu kestuse näidik: √ Modelleerimisvalgus (LED): √ Fototundlik režiim: S1/S2/OFF Ekraan: Värviekraan Töökeskkonna temperatuur: Maksimaalselt 45°C Juhtmevaba välk (2,4G edastus): Juhtmevaba funktsioon: Vastuvõtja, väljas Kontrollitavad vastuvõtja rühmad: 16 (0-9, A-F) Edastusulatus: Ligikaudu 100 m Kanalid: 32 (1-32) ID: 01-99/OFF Toiteallikas: Liitiumaku (14,4 V / 2980 mAh) Täisvõimsusel välgatused: 500 Taaslaadimisaeg: Ligikaudu 0,01–1,8 s Energiatõhusus: Automaatne väljalülitus menüüst seadistatav (30–120 min tühikäigul) Sünkroonkäivitus: 3,5 mm sünkroonkaabel Välgupirni värvitemperatuur: 5800 ±200K Välgu režiim (CCT): Palja toru ±100K stabiilse värvitemperatuuri režiimis.

Kompaktne ja võimas valgus Tutvu uue Godox iM30 iFlash kaameravälguga, mis on loodud kaamera peal kasutamiseks. Selle väike ja kerge disain muudab selle taskusse mahtuvaks ning alati käepäraseks kaaslaseks. Olgu päev päikesepaisteline või pilvine, iM30 pakub lisavalgust ilma vaevata. Seitsme reguleeritava võimsustaseme (1/64–1/1), juhtarvu 15 (ISO 100, meetrites) ning vahetatavate patareide toitega aitab see välk sul jäädvustada iga hetke täiuslikus valguses. Peamised omadused Kompaktne ja taskus kantav välk Lihtne ja kiire kasutamine – plug-and-play 7 võimsustaset Töötab vahetatavate patareidega Kompaktne ja kerge IM30 kaalub vaid 78 g ning mahub kergesti pihku. Tänu oma väikesele suurusele on see mugav taskusse pista või kaamera külge kinnitada, muutes selle ideaalseks kaaslaseks igapäevaseks pildistamiseks. Lai ühilduvus Ühe kontaktiga hot shoe disain muudab iM30 välgu ühilduvaks enamike hübriidkaamerate ja filmikaameratega. Kinnita see lihtsalt kaamera hot shoe pesasse ja alusta pildistamist. Loomulik valgus Juhtarvuga 15 (ISO 100, meetrites) pakub iM30 välk eredamat ja loomulikumat täitevalgust kui enamike kaamerate sisseehitatud välgud, parandades piltide kvaliteeti. 7 reguleeritavat võimsustaset Välgu võimsust saab lihtsalt reguleerida 7 astmes (1/64 kuni täisvõimsus), keerates lihtsalt nuppu ja saavutades täpse valgustuse igas olukorras. Vahetatav toide IM30 töötab kahe AAA patareiga, mida on lihtne laadida või asendada, et sa ei peaks kunagi muretsema voolu lõppemise pärast. Töötab kaua ja usaldusväärselt IM30 välk on loodud kestma, pakkudes kuni 230 välgatust ühe laadimisega (kasutades laetavaid patareisid), et saaksid oma loomingulised ideed ellu viia ilma katkestusteta. Tehnilised andmed Mudel: iM30 Toide: kaks AAA patareid (müüakse eraldi) Juhtarv (täisvõimsusel): ≈15 (ISO 100, meetrites) Välgatuste arv täisvõimsusel: ≈230 (laetavate patareidega) Taastuskiirus (täisvõimsusel): ≈3,6 sekundit Välgu võimsustasemed: 7 (1/64 kuni täisvõimsus) Värvitemperatuur: 6500K ± 200K Optiline päästik: S1 ja S2 optiline päästik või väljas Töökeskkonna temperatuur: -10℃ kuni +50℃ Sünkroonimine: Hot shoe, Sync Cord Mõõtmed: 6.1 cm x 5.2 cm x 4.5 cm Kaal (ilma patareideta): ≈78 g

StudioKing Barndoors Set SK-BD18 – täpne valguskontroll ja värviefektid StudioKing SK-BD18 barndoors komplekt koos värvifiltrite ja kärgstruktuuriga on taskukohane ja mitmekülgne lahendus valguse suunamiseks ja efektide loomiseks. Komplekt sisaldab nelja värvifiltrit (punane, sinine, kollane ja roheline), mis on kinnitatud vastupidavatesse metallraamidesse, tagades lihtsa ja kiire vahetamise. Lisaks kuulub komplekti kärgstruktuur, mis aitab valgust täpselt fokusseerida ja hajuvust vähendada. Mitmekülgne kasutusvõimalus SK-BD18 barndoors komplekti saab kinnitada reflektoritele, mille läbimõõt on 18 cm kuni 27 cm. Filtrite vahetamine on lihtne – need kinnituvad barndoors paneelide nurkadesse konksude abil. Samal viisil on võimalik kinnitada ka kärgstruktuur. Peamised eelised: ✅ Täielik valguse kontroll – suunake valgust täpselt soovitud alale. ✅ Loomingulised värviefektid – lisage fotodele ja videotele unikaalne ilme. ✅ Fokuseeritud valgus – kärgstruktuur vähendab valguse hajumist ja muudab selle täpsemaks. Komplekti sisu: ✔ 1x SK-BD18 barndoors komplekt ✔ 4x Värvifilter (punane, sinine, kollane, roheline) ✔ 1x Kärgstruktuur Ideaalne stuudiofotograafidele, videograafidele ja kõigile, kes soovivad oma valguslahendust paremini kontrollida!

The Godox Speedlite TT560 II flash is a manually adjustable flash including separate trigger. The flash is equipped with a built-in receiver so that you can use it separately from the camera. By placing the included trigger on the hot shoe of your camera, you can trigger the flash up to a distance of approximately fifteen meters. The powerful TT560 II has a guide number of 38 at ISO 100. The flash head can be tilted 90 degrees upwards and rotated 270 degrees horizontally. In addition, the flash has a built-in wide-angle diffuser and a bounce card. The Godox Speedlite TT560 II flash can be used universally - the flash power is adjustable in 1/8 steps from 0 to 100 percent. You can fire about 100-1500 times on four AA batteries, depending on the set flash power. When using four AA batteries, the recycle time is 0.1-5 seconds. This universal Godox Thinklite TT560 II flash is suitable for use with system cameras and SLR cameras from, for example, the Canon, Nikon, Sigma Olympus and Pentax brands. The flash is not suitable for use with Sony and Minolta due to the different hot shoe. Characteristics Guide number of 38 at ISO 100 Flash settings M, S1 and S2 Sixteen channels Color temperature of 5600K Operates on four AA batteries Includes wireless trigger Flashtube Warranty: None In the box Trigger Foot Pouchl

Flash projection attachment The Godox Bowens Mount Flash Light Projection Attachment is a professional and reliable light shaper for use with Bowens-mounted studio flash units. The special optical lens ensures bright projection. The 360° swivel design makes adjusting gobo patterns super easy. With BFP, you have the power to create bright spots, precise shapes and creative patterns according to your vision. Highlights A professional and reliable light shaper Innovative 360° rotatаble design Smooth, safe operation Innovative 360° rotatаble design The BFP features Godox´s innovative 360° rotatаble design for effortless gobo adjustments, ensuring an uninterrupted creative flow. Say goodbye to the hassle of taking out the gobo holder and adjusting the gobo angle. Simply rotate the front part of the BFP, align everything in seconds and achieve your desired pattern. Precise, bright projection The BFP lets you create precise patterns with sharp light edges. The carefully crafted lens produces a sharp, bright light circle with precise color accuracy and provides uniform brightness from center to edge. Experience vibrant, lifelike colors and sharp details from edge to edge. Smooth, safe operation Experience effortless adjustments with the BFP´s carefully crafted lenses, which ensure not only excellent optical effects, but also seamless and safe operation. Each of the four focusing lenses features a heat-insulating cover for safe operation. With a spacious base and multiple openings enveloping the housing, the BFP exhibits exceptional heat dissipation performance. Efficient, creative design The BFP has four built-in shutter blades for highly efficient creative expression. Easily adjust the blades to cut the patterns you want. The levers move effortlessly, allowing you to create extremely precise shapes such as triangles, squares, rectangles and so on, depending on your creative needs. EF mount versatility The BFP has an EF mount, compatible with a range of EF lenses in addition to the dedicated lens. (For optimal results and lens protection, we recommend using Godox lenses). Wide light compatibility With its wide base and Bowens mount, the BFP is compatible with most Bowens Mount flash units on the market, including Godox QT series, AD600 Pro, AD1200 Pro, and so on. Optional speed rings are available for lights with other mounts. Characteristics Flash projection attachment dimensions: 220 x 220 x 232 mm Dimensions 85 mm lens: 80 x 80 x 88 mm Weight Flash projection attachment: 1.3 kg Weight 85 mm lens: 0.7 kg In the box 1 x Godox Bowens Mount Flash Light Projection Attachment 1 x Lens 85 mm 1 x Gobo holder 1 x Gobo set 1 x Gel frame 1 x Carrying bag