The Caruba Lantern Softbox is perfect for creating soft and even light that spreads in all direction. With a 270° beam angle, the softbox is perfect to use for video recording, live streaming and film making. Equipped with a Bowens mount, the Lantern is compatible with any Bowens mount. The Caruba Lantern is easy to set up, making it a quick solution on stage or on location. For further control, Caruba provides a 4 sections skirt (sold separately) that helps you to avoid unwanted bouncing light. The Softbox is delivered in her handy carrying bag. Characteristics Beam spread angle of 270° Bowens mount Fast, simple setup Optional skirts for beam spread control In the box Caruba Collapsible Lantern Softbox Carry Case
Powered by an Extreme Li-Ion Battery; SPEED! Fast recycle time of 1.5 sec (4x faster than AA battery power); 550 shots using full power; Built-in 2.4GHz wireless receiver & transmitter; Unique wireless connectivity; ...
Powered by an Extreme Li-Ion Battery; SPEED! Fast recycle time of 1.5 sec (4x faster than AA battery power); 550 shots using full power; Built-in 2.4GHz wireless receiver & transmitter; Unique wireless connectivity; ...
Wireless radio-controlled TTL control with the Hähnel Viper system; Powerful rechargeable Li-Ion battery – more than 400 flash shots at full power!; Very fast flash recycle time, only 1.5 seconds; Zoom reflector with a high guide ...
Godox Power Remote Control XTR-16S sobib suhtlemiseks X1 seeria ja V860 seeria saatjatega. Ultilizing build-in Godox X-system, the X1R-16S receiver can adjust flash power level as well as triggering with X1 series TTL flash Transmitter Using XT series receiver and X1 series transmitter, TTL flashes and Non-TTL flashes can be used in combination, which offers great convenience and bette light distribution for photographers When use XT series Receiver in combination with X1 series Transmitter, pleas set the X1 transmitter to M mode XTR16/ XTR16S Can´t receive the parameters that emitted by the Transmitter in TTL and Multi modes Fit Flashes: Godox Ving camera flashes
XProS TTL Wireless Flash Trigger can not only control the flashes with built-in Godox wireless X system e.g. camera flashes, outdoor flashes and studio flashes, but also can control the Sony original flashes when using in combination with X1R-S receiver. Featuring multi-channel triggering and stable signal transmission, this flash trigger applies to hotshoe-mounted Sony series cameras.
Works with X Wireless Radio System. Compatible with Nikon i-TTL / E-TTL II. Frequency: 2.4 GHz. Range: 328´. 32 Channels; 16 Groups; Wireless ID. Remote Power Control for Select Flashes. Backlit LCD Panel. High-Speed, 1st & 2nd Curtain Sync. 2.5mm Sync Port; USB Type-C Port. Runs on Two AA Batteries.
Designed for the 2.4 GHz Godox X wireless radio system, this XProS II TTL Wireless Flash Trigger lets you effectively and reliably trigger flashes up to 100 m away. This model is compatible with Sony´s TTL system, including support for high-speed sync up to 1/8000 second, and offers advanced control capabilities for working with system-specific features. The XProII S sets up an important connection between the Godox lighting system and Canon cameras. With this transmitter, you can control Godox lights, set the output, and trigger it remotely to get satisfactory results. The transmitter can operate in both TTL and HSS automatic modes, allowing you to use the flash at shutter speeds up to 1/8000 sec. The Xpro II S helps expose the entire image evenly, so you get the best possible shots without too much effort. In addition, the real-time display of the remote flash settings on the extra-large LCD screen allows you to quickly correct parameters. A flash can be triggered if both the flash and the trigger are set to the same channel, group and ID. Separate channels and IDs effectively avoid signal interference. If several flashes are used in a scene, and the user is looking for the least interfering channel and ID, the appropriate channel will be quickly found by the scanning function, increasing work efficiency. If your camera, trigger and flash are far away from each other, try using our Godox Flash app to remotely control the flash power. For added convenience, the Godox Flash app allows you to customize the flash value. The interface of the Godox Flash app is clear and easy to use. Just download this app to control all settings directly on your mobile device. If you are shooting the same subject with other people and share the same set of flashes, try the multi-flash shooting mode. In this function, the Xpro II S transmitter sends the flash value it has set to the flash, and the flash operates according to that value. Thanks to Godox´s cooperation with Sekonic, it is possible for lamps and transmitters to work with Sekonic light meters. It is possible to directly adjust the flash value through the light meter, after measuring the exposure. With this feature, you can save more time shooting and looking for the right shots rather than tedious adjustments. After measuring the suggested TTL flash power as a reference, it is possible to quickly convert to manual flash using the TCM function. This speeds up the timing in dynamic situations and gives us room for even more creative control over the plan. When you turn on high-speed trigger mode, you can significantly increase the speed of continuous shooting, the flashes are triggered at a rapid pace, and the intervals between flashes are shorter. In package: Godox XProII Sony trigger, original packaging.
Designed for the 2.4 GHz Godox X wireless radio system, this XProN II TTL Wireless Flash Trigger lets you effectively and reliably trigger flashes up to 100 m away. This model is compatible with Nikon´s TTL system, including support for high-speed sync up to 1/8000 second, and offers advanced control capabilities for working with system-specific features. The XProII N sets up an important connection between the Godox lighting system and Nikon cameras. With this transmitter, you can control Godox lights, set the output, and trigger it remotely to get satisfactory results. The transmitter can operate in both TTL and HSS automatic modes, allowing you to use the flash at shutter speeds up to 1/8000 sec. The Xpro II N helps expose the entire image evenly, so you get the best possible shots without too much effort. In addition, the real-time display of the remote flash settings on the extra-large LCD screen allows you to quickly correct parameters. A flash can be triggered if both the flash and the trigger are set to the same channel, group and ID. Separate channels and IDs effectively avoid signal interference. If several flashes are used in a scene, and the user is looking for the least interfering channel and ID, the appropriate channel will be quickly found by the scanning function, increasing work efficiency. If your camera, trigger and flash are far away from each other, try using our Godox Flash app to remotely control the flash power. For added convenience, the Godox Flash app allows you to customize the flash value. The interface of the Godox Flash app is clear and easy to use. Just download this app to control all settings directly on your mobile device. If you are shooting the same subject with other people and share the same set of flashes, try the multi-flash shooting mode. In this function, the Xpro II N transmitter sends the flash value it has set to the flash, and the flash operates according to that value. Thanks to Godox´s cooperation with Sekonic, it is possible for lamps and transmitters to work with Sekonic light meters. It is possible to directly adjust the flash value through the light meter, after measuring the exposure. With this feature, you can save more time shooting and looking for the right shots rather than tedious adjustments. After measuring the suggested TTL flash power as a reference, it is possible to quickly convert to manual flash using the TCM function. This speeds up the timing in dynamic situations and gives us room for even more creative control over the plan. When you turn on high-speed trigger mode, you can significantly increase the speed of continuous shooting, the flashes are triggered at a rapid pace, and the intervals between flashes are shorter. In package: Godox XProII Nikon trigger, original packaging.
Designed for the 2.4 GHz Godox X wireless radio system, this XProL II TTL Wireless Flash Trigger lets you effectively and reliably trigger flashes up to 100 m away. This model is compatible with Leica´s TTL system, including support for high-speed sync up to 1/8000 second, and offers advanced control capabilities for working with system-specific features. The XProII L sets up an important connection between the Godox lighting system and Leica cameras. With this transmitter, you can control Godox lights, set the output, and trigger it remotely to get satisfactory results. The transmitter can operate in both TTL and HSS automatic modes, allowing you to use the flash at shutter speeds up to 1/8000 sec. The Xpro II L helps expose the entire image evenly, so you get the best possible shots without too much effort. In addition, the real-time display of the remote flash settings on the extra-large LCD screen allows you to quickly correct parameters. A flash can be triggered if both the flash and the trigger are set to the same channel, group and ID. Separate channels and IDs effectively avoid signal interference. If several flashes are used in a scene, and the user is looking for the least interfering channel and ID, the appropriate channel will be quickly found by the scanning function, increasing work efficiency. If your camera, trigger and flash are far away from each other, try using our Godox Flash app to remotely control the flash power. For added convenience, the Godox Flash app allows you to customize the flash value. The interface of the Godox Flash app is clear and easy to use. Just download this app to control all settings directly on your mobile device. If you are shooting the same subject with other people and share the same set of flashes, try the multi-flash shooting mode. In this function, the Xpro II L transmitter sends the flash value it has set to the flash, and the flash operates according to that value. Thanks to Godox´s cooperation with Sekonic, it is possible for lamps and transmitters to work with Sekonic light meters. It is possible to directly adjust the flash value through the light meter, after measuring the exposure. With this feature, you can save more time shooting and looking for the right shots rather than tedious adjustments. After measuring the suggested TTL flash power as a reference, it is possible to quickly convert to manual flash using the TCM function. This speeds up the timing in dynamic situations and gives us room for even more creative control over the plan. When you turn on high-speed trigger mode, you can significantly increase the speed of continuous shooting, the flashes are triggered at a rapid pace, and the intervals between flashes are shorter. In package: Godox XProII Leica trigger, original packaging.
Designed for the 2.4 GHz Godox X wireless radio system, this XProF II TTL Wireless Flash Trigger lets you effectively and reliably trigger flashes up to 100 m away. This model is compatible with Fuji´s TTL system, including support for high-speed sync up to 1/8000 second, and offers advanced control capabilities for working with system-specific features. The XProII F sets up an important connection between the Godox lighting system and Fuji cameras. With this transmitter, you can control Godox lights, set the output, and trigger it remotely to get satisfactory results. The transmitter can operate in both TTL and HSS automatic modes, allowing you to use the flash at shutter speeds up to 1/8000 sec. The Xpro II F helps expose the entire image evenly, so you get the best possible shots without too much effort. In addition, the real-time display of the remote flash settings on the extra-large LCD screen allows you to quickly correct parameters. A flash can be triggered if both the flash and the trigger are set to the same channel, group and ID. Separate channels and IDs effectively avoid signal interference. If several flashes are used in a scene, and the user is looking for the least interfering channel and ID, the appropriate channel will be quickly found by the scanning function, increasing work efficiency. If your camera, trigger and flash are far away from each other, try using our Godox Flash app to remotely control the flash power. For added convenience, the Godox Flash app allows you to customize the flash value. The interface of the Godox Flash app is clear and easy to use. Just download this app to control all settings directly on your mobile device. If you are shooting the same subject with other people and share the same set of flashes, try the multi-flash shooting mode. In this function, the Xpro II F transmitter sends the flash value it has set to the flash, and the flash operates according to that value. Thanks to Godox´s cooperation with Sekonic, it is possible for lamps and transmitters to work with Sekonic light meters. It is possible to directly adjust the flash value through the light meter, after measuring the exposure. With this feature, you can save more time shooting and looking for the right shots rather than tedious adjustments. After measuring the suggested TTL flash power as a reference, it is possible to quickly convert to manual flash using the TCM function. This speeds up the timing in dynamic situations and gives us room for even more creative control over the plan. When you turn on high-speed trigger mode, you can significantly increase the speed of continuous shooting, the flashes are triggered at a rapid pace, and the intervals between flashes are shorter. In package: Godox XProII Fuji trigger, original packaging.
Designed for the 2.4 GHz Godox X wireless radio system, this XProC II TTL Wireless Flash Trigger lets you effectively and reliably trigger flashes up to 100 m away. This model is compatible with Canon´s TTL system, including support for high-speed sync up to 1/8000 second, and offers advanced control capabilities for working with system-specific features. The XProII C sets up an important connection between the Godox lighting system and Canon cameras. With this transmitter, you can control Godox lights, set the output, and trigger it remotely to get satisfactory results. The transmitter can operate in both TTL and HSS automatic modes, allowing you to use the flash at shutter speeds up to 1/8000 sec. The Xpro II C helps expose the entire image evenly, so you get the best possible shots without too much effort. In addition, the real-time display of the remote flash settings on the extra-large LCD screen allows you to quickly correct parameters. A flash can be triggered if both the flash and the trigger are set to the same channel, group and ID. Separate channels and IDs effectively avoid signal interference. If several flashes are used in a scene, and the user is looking for the least interfering channel and ID, the appropriate channel will be quickly found by the scanning function, increasing work efficiency. If your camera, trigger and flash are far away from each other, try using our Godox Flash app to remotely control the flash power. For added convenience, the Godox Flash app allows you to customize the flash value. The interface of the Godox Flash app is clear and easy to use. Just download this app to control all settings directly on your mobile device. If you are shooting the same subject with other people and share the same set of flashes, try the multi-flash shooting mode. In this function, the Xpro II C transmitter sends the flash value it has set to the flash, and the flash operates according to that value. Thanks to Godox´s cooperation with Sekonic, it is possible for lamps and transmitters to work with Sekonic light meters. It is possible to directly adjust the flash value through the light meter, after measuring the exposure. With this feature, you can save more time shooting and looking for the right shots rather than tedious adjustments. After measuring the suggested TTL flash power as a reference, it is possible to quickly convert to manual flash using the TCM function. This speeds up the timing in dynamic situations and gives us room for even more creative control over the plan. When you turn on high-speed trigger mode, you can significantly increase the speed of continuous shooting, the flashes are triggered at a rapid pace, and the intervals between flashes are shorter. In package: Godox XProII Canon trigger, original packaging.
Godox X2T-S TTL Wireless Flash Trigger for Sony. The X2T-S TTL wireless flash trigger can work with Godox camera flashes, outdoor flashes, and studio flashes with built-in Godox X wireless radio system. It achieves stable, reliable and effective real-time signal transmission which makes it a good choice for photographers who have various lighting demands. BT Support: Using your smartphone or tablets (adopt for iOs or for Android-based system) to connect the X2T-S via. BT after downloading the GodoxPhoto APP, you can control the flash mode, power output, the modeling light mode, the beep of Godox flashes, and so on. Fully support TTL autoflash, 1/8000s high-speed sync, multiflash mode, manual mode, flash exposure compensation, adjusting the lighting parameter through the mobile APP, scan setting, one-shot and multi-shot setting, control of the modeling lamp, adjusting all groups´ output value simultaneously, etc. With quick lock hot-shoe; The minimum power output can be precisely set to 1/256 in 1/10 step adjustment. With 5 groups, 32 channels and access to 99 wireless ID settings to limit the interference from other nearby systems.
Godox X2 T compatible with Quadralite Navigator X is an extremely useful tool, can work both as a remote trigger and driver for reporter and studio lamps as well as serve as a wireless trigger for the camera. It allows you to work using multiple transmission channels, provides a stable signal, high response speed and full control over the lamps. Built-in Bluetoth. Godox X2T is fully compatible with TTL automatic flash measurement of dedicated cameras, it also provides full control over the flash output in manual (M) and strobe (Multi) modes. The user in both cases can use flash exposure compensation or manually set the flash energy. Synchro with very short exposure times (HSS) and flash modes for the first and second curtain are also available. The built-in bleutooth module allows you to connect to your smartphone and you can control the lamps from your smartphone using the Godox application (Android/Apple). Some models of smartphones allow you to trigger lamps when you take a photo. Set contains: Transmitter Godox X2T original packaging
Godox X2T-N TTL Wireless Flash Trigger for Nikon, Bluetooth Connection, 1/8000s HSS, TCM Function, 5 Separate Group Buttons, Relocated Control-Wheel, New Hotshoe Locking, New AF Assist Light. Built-in Bluetooth for APP Control|: You Can Connect the X2T-N to Your Phone or Tablet via Bluetooth after Download the "GodoxPhoto" APP, Then control the Flash Mode, Power Output, the Modeling Light Mode, the Beep of Godox Flashes, and etc. It is Extremely Useful When Doing Product Photography in the Studio While the Radio Trigger is Hard to Reach on the Top of the Camera TTL Autoflash and Pro Functions|: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, Scan setting, One-shot and Multi-shot setting, Control of the Modeling Lamp, Adjusting All Groups´ Output Value Simultaneously, ect.
Godox X2T compatible with Quadralite Navigator X is an extremely useful tool, can work both as a remote trigger and driver for reporter and studio lamps as well as serve as a wireless trigger for the camera. It allows you to work using multiple transmission channels, provides a stable signal, high response speed and full control over the lamps. Built-in Bluetoth. Godox X2T is fully compatible with TTL automatic flash measurement of dedicated cameras, it also provides full control over the flash output in manual (M) and strobe (Multi) modes. The user in both cases can use flash exposure compensation or manually set the flash energy. Synchro with very short exposure times (HSS) and flash modes for the first and second curtain are also available. The built-in bleutooth module allows you to connect to your smartphone and you can control the lamps from your smartphone using the Godox application (Android/Apple). Some models of smartphones allow you to trigger lamps when you take a photo. Set contains: Transmitter Godox X2T original packaging
Godox X2T-C TTL Wireless Flash Trigger for Canon, Bluetooth Connection, 1/8000s HSS, TCM Function, 5 Separate Group Buttons, Relocated Control-Wheel, New Hotshoe Locking, New AF Assist Light. Built-in Bluetooth for APP Control|: You Can Connect the X2T-C to Your Phone or Tablet via Bluetooth after Download the "GodoxPhoto" APP, Then control the Flash Mode, Power Output, the Modeling Light Mode, the Beep of Godox Flashes, and etc. It is Extremely Useful When Doing Product Photography in the Studio While the Radio Trigger is Hard to Reach on the Top of the Camera. TTL Autoflash and Pro Functions|: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, Scan setting, One-shot and Multi-shot setting, Control of the Modeling Lamp, Adjusting All Groups´ Output Value Simultaneously, ect.
Godox X1 välguvastuvõtja (Sonyle). Godox X1R juhtmevaba TTL vastuvõtja Sonyle. Tänu sisseehitatud 2.4G vastuvõtjale on maksimaalne töökaugus kuni 100m. Toetab täielikult Sony i-TTL automaatvälgu reziimi, ning High speed sünkroniseerimine kuni 1/8000 sek. Tänu 32 kanalile 5 grupis, ning 99 erinevale ID koodile saab välke kasutada segamatult. Godox X1R-S 2.4G TTL High Speed Sync Wireless Remote Flash Receiver Compatible for Sony Camera with (X1R-S Receiver). Godox X1R-S Receiver is compatible: Sony DSLR Cameras(Support TTL Autoflash), Support for the Cameras with a PC Sync Socket. Built-in 2.4G wireless transmission provides 100 meters further transmission distance and creative triggering methods. Godox X1R-S Wireless Receiver Support for TTL Autoflash, 1/8000s High Speed Sync, Flash exposure compensation, flash exposure lock, modeling flash etc. Wireless remote control and grouping system; support 5 groups and 32 channels to triggering flash, with Big and Clear LCD Panel for easy operation. Wireless Shutter Release: Receiver can control cameras shooting through 2.5mm shutter release interface
Godox X1 välguvastuvõtja (Nikonile). Godox X1R juhtmevaba TTL vastuvõtja Nikonile. Tänu sisseehitatud 2.4G vastuvõtjale on maksimaalne töökaugus kuni 100m. Toetab täielikult Nikoni i-TTL automaatvälgu reziimi, ning High speed sünkroniseerimine kuni 1/8000 sek. Tänu 32 kanalile 5 grupis, ning 99 erinevale ID koodile saab välke kasutada segamatult. Godox X1R-N 2.4G Wireless Receiver Flash Trigger Single Receiver for Nikon DSLR Camera (X1R-N Receiver). 2.4G wireless transmission, 32 channels, support up to 1/8000s HSS function. Featuring multi-channel triggering, stable signal transmission, and sensitive reaction. Provides up to 100 meters further transmission distance and creative triggering methods. Use with X1T-N transmitter (sold separately) to trigger camera flash which support Nikon i-TTL autoflash (Note: Please set your flash to TTL mode). The receiver equips with big LCD panel to offer convenient operation.
Fuji Cameras are divided into three kinds according to their controlling ways to camera flash: A* GFX50S, X-pro2, X-T20, X-T2, X-T1 B* X-Pro1, X-T10, X-E1, X-A3 C* X100F, X100T Compatible Camera Model and Function Support: TTL Mode: Standard(A/B/C)--Rear(A/C)--HSS-FP(A) M Mode: Standard(A/B/C)--Rear(A/C)--HSS-FP(A) Multi-Mode: Flash(A/B/C) AF-assist Beam: A More Features FE lock 11 Customizable Functions Manual Flash 1/1 - 1/256 Power Modeling Light Status Control Adjusts the Flash Zoom Coverage for Each Group Ѕelective Transmission of Data Conserves Energy and Battery Life Magnification Function Displays Details of Each Group Settings Global Adjustments to Exposure Values for Multi-Group in M Mode 5 Group Buttons and 4 Function Buttons Offer Convenient Manipulation Support Type-C USB Firmware Upgrade and Wireless Triggering by 2.5mm Sync Cord Jack Auto Focus Assist: Yes Modeling Lamp Control: Control the modeling lamp by the flash trigger Beeper: Control the sound of the flash trigger Wireless Setting: The receiver end can control the camera shooting through the 2.5mm sync cord jack ZOOM setting: Adjust the ZOOM coverage value from the transmitter TCM function: Transforms the TTL shooting value into the output value in M mode Firmware upgrade: Upgrade through the Type-C USB port Memory function: Settings will be stored 2 seconds after the last operation and recover after a restart Wireless Flash Wireless Signal Range: >328 feet / >100 Meters Remote System: 2.4GHz Modulation Mode: MSK Channels: 32 Wireless ID: 01-99 Groups: 16 Dimensions: 3.5x2.3x2.0"/ 90x58x50mm Display: Large LCD panel with customizable backlight Package List 1* Godox Xpro-F 1* Product Manual
Godox Witstro Handgreep With this Godox Witstro Handgrip you can use your Witstro AD180 or AD360 flash by hand for flexible and creative flashing. You can also quickly and easily attach the flash including the handle to a tripod. Due to its small and compact dimensions, the handle is easy to carry. Characteristics: Flexible and creative flash from hand Simple attachment Anti-slip top Reliable and easy to use Can also be placed on a tripod including handle Dimensions: 12.8x5x3.5cm Weight: 120 gram
Godox WB30P Lithium Battery for AD300Pro. Godox WB30P is an advanced lithium-ion battery that has been designed for performance, making it more reliable than ever when shooting on location. The battery is loaded into the underside of the AD300 Pro strobe unit to keep it super compact due to its small size. The WB30P offers a recycle time of just 0.01-1.5s with up to approximately 320 full power flashes. 14.4V / 2600mAh Lithium-ion Battery Size Battery: 2 13/16 x 2 13/16 x 1 9/16 (71x71x40mm) Weight Battery: 7.5oz (214g) Fits Godox AD300 PRO, AD200, AD200 Pro, X200
Godox VC26 charger for VB26 battery (V1, V860III, MF-R76 and AD100Pro). USB Charger Godox VC26Replacement USB charger Godox VC26 for Li-Ion battery VB26 (7,2V / 2600mAh) Suitable for TTL Li-ion Round Head Flash Godox V1 Charging time: 3,5 Stunden Without charging cable Type Have you lost your battery charger or do you need a spare? The Godox VC26 is the replacement for the Godox V1 and AD100 Pro charger. The Godox VC26 USB Charger for V1 Battery is connected to your computer for charging via a separate USB cable that´s provided in the basic V1 and AD100 Pro package. In package: VC26 Charger Original Packaging
Godox VC-18 is a Godox VB-18 battery charger with a capacity of 2000mAh. The VC-18 charger, powered from the mains, charges the empty VB-18 battery to its maximum capacity in about 2.5 hours.
Godox VB26B aku V1 ja V860III välkudele (2980 mAh 21.45 Wh) sobib nii Quadralite kui ka Godox V1 välkudele Lithium-ion battery designed for Godox V1S / V1C / V1N / V1F / V1O / V1P flash units. The battery has a capacity of 2600 mAh and a constant voltage of 7.2 V. The long-lasting design allows for multiple charging. Can be used as a backup battery for Godox V1 flash. Power reserve The Godox VB26B battery is very useful as an additional battery in the event that the battery supplied with the lamp does not provide enough flashes during the session. Technical data: - Compatible models: Godox flash V1S / V1C / V1N / V1F / V1O / V1P - Capacity: 2980 mAh 21.45 Wh - Voltage: 7.2V
Godox VB-18 Spare Li-on Battery is dedicated spare battery for the Godox V850 V850II V860 V860II series. It provides up to 650 full-power flashes. The Godox VB-18 battery is a li-ion battery specially designed for the Godox Speedlight V860 and V850 flash. The battery has a capacity of 2000mAh which is enough to provide you with 500 flashes at full power. The Godox VB-18 is therefore suitable as a replacement battery, but also extremely useful to have with you as an extra battery if you are not satisfied with the 500 flashes of a single battery charge.
See välklamp sobib Sony seeria peegelkaameratele ja ühildub i-TTL automaatvälguga. See muudab pildistamise lihtsamaks.; Punktmaatriks LCD-paneel selgeks ja lihtsaks kasutamiseks.; Kasutage 4 funktsiooniklahvi, et muuta erinevaid ...
See välklamp sobib Canoni seeria kaameratele ja ühildub E-TTL II automaatvälguga. See muudab pildistamise lihtsamaks.; Punktmaatriks LCD-paneel selgeks ja lihtsaks kasutamiseks.; Kasutage 4 funktsiooniklahvi, et muuta erinevaid ...