The M Universal Projector Ceiling Mount 200 with Fine tune give you easy placement of your projector in the most discreet setting possible. You can orient and incline according to several axes. The model features integrated cable-management, easy fine tune settings adjustments, once the projector is in place. This projector mount has a minimum of surface area to the projector good for not trapping heat close to your projector thus not cutting your projector lamps lifetime.The built in fine tune technology provides easy fingertip positioning capabilities which automatically adjusts the projectors position. That way you can always be sure to get a well balanced position for your projector after installing it. This does not only save installation time but also make room for possible changes of what projector is being used or how your projection screen is positioned, perfect if you anticipate changing projectors in the future. The arms holding the projector are articulated and telescopic to adopt to almost all projector models.
Replacement Lamp for the Panasonic PT-EZ570UL LCD Projector is a 330 watt lamp. It burns up to 4,000 hours in ECO mode (3,000 in Normal mode)BrändiühilduvusPanasonicÜhilduvusPT-EZ570ULPirni võimsus330 WLambi tööiga3000 hLambi tüüpUHMLambi tööiga (säästurežiim)4000 h
Avtek Business 240 (16:10) Matt White, 5907731310932, n
Recommended for presentation halls, training rooms and classrooms
Screen size: 240 x 200 cm, Projection size: 230 x 144 cm
Aspect ratio 16:10
High quality Matt White projection surface
Black frames - 5 cm
Black TOP 51cm
Lower bar made from special material - screen surface not prone to creasing
- Universal projector ceiling mount with telescopic pole- Overall length 440-735 mm- Full adjustment: tilt at top for sloping ceilings / pitch and roll at the bottomThe TM-TELE Techmount is a projector ceiling bracket for anchoring any data projector safely to a ceiling. The telescopic design allows fast deployment and adjustment without the need cut and drill the pole. It has a greater range than most other telescopic mounts and the pole can be removed for “flush-mounting” the projector as close to the ceiling as possible. Note: unlike the TM-1200 the length of this bracket cannot be extended.One-Man InstallationThoughtful design detail include a length adjustment clamp system which requires only one hand.Sloping CeilingsA tilting mechanism is included which tilts to a full 90 degrees, allowing you to use the bracket as a boom if need be.Safety ApprovedA back-up fall-arrest tether is included which secures the projector to your bracket, and the pole has a mechanical stop so that the two parts of the pole cannot be separated. Vision recommends a maximum safe working load of 10kg which is well within the limits of the product and meets the BSi installation standard specification (PAS122:2009).Easy fitProjectors have threaded inserts in the bottom for attachment – but not all use the same diameter screws so Vision includes a selection to suit most projectors. Simply locate the “spider” arms on our bracket over the attachment holes, and insert a screw into the projector.Obstruction-free Cable ManagementVision’s unique ‘chute-through’ system leaves cable access clear – even for big VGA connectors.Tools IncludedA spanner and pin-hex key are included. Vision also includes a hex-key bit for a power drill to speed up installation.SecureQuick-release mechanisms make life easier for thieves, so the TM-TELE is secure and features security bolts.Kinnituse tüüpLagiMaksimaalne kaal (mahutavus)10 kgKaldenurk0 - 90°Sügavus (minimaalne)43,7 cmSügavus (maksimaalne)73,5 cmToote värvValge
"Reflecta CrystalLine mootor pakub väga head hinna ja kvaliteedi suhet. Keerukas mootorimehhanism võimaldab hõlpsasti välja- ja sissetõmbamist. Kvaliteetne kangas annab vaatajale suurepärase vaate.
SCREEN MANUAL DEVELOPED- MAGNUM casing designed for modern interiors- Flat bottom surface enables aesthetic installation- Black frames increase the contrast of the viewed image- Black TOP - the ability to adjust the image height to the viewer's eye level- Lower beam made of special plastic - the surface of the screen is not corrugated- SRC (Slow Return Control) system - smooth and safe screen rewind- Adjusting the height of the lower edgeA new, improved MAGNUM housing Designed for modern interiors at home and in the office Unique, square shape - ideal for ceiling installations and wall mounting Flat bottom surface enables aesthetic installation in suspended ceilings, leaving the screen out of sight when not in use Cross-section of the cassette: rectangle - width 7.2 cm, height 8 cm Cartridge length = the nominal width of the screen + 8cm + 2 x "ears" by 2 cmMatt White: universal, white surface, for use in controlled lighting conditions. It provides a perfect uniform image. Recommended for presentation, training and classrooms. It can be used under strong lighting at the back of the screen. A large viewing angle of 75 degrees (R / L). Coefficient of reflection 1.0.
This NewStar Projector / beamer mount allows you to mount your BEAMER to the ceiling. The kit is universal allowing the user to use this system with most beamers. It is supplied with many extension plates to be used with every beamer holepattern. The beamer can easily be turned to the best viewing angle. The height can be changed from 29 to 87 cm offering many different hights. Cables can be placed in the column.
White metal Magnum casing - unique square cross-sectionFlat bottom of the casing ideal for in-ceiling installationsLower bar made of hard material protecting surface from creasingIdeal for ceiling or wall mountingTubular engine (type 35-6/28) designed for intensive operationHigh quality Matt White projection surfaceGain factor 1.0Black frames increase perceived contrast ratio
