The NewStar LED TV wall mount, model LED-W220, allows you to mount a LED TV to any wall. Cause of the flexible hole pattern of this system is this wall mount useable for almost every LED TV up to 40 inches. This wall mount allows users to tilt screens up to 20 degrees. This wall mount is easily to install by using the VESA hole pattern at the rear side of your TV. This wall mount can be used when the maximum distance between the holes (left to right) is 20 cm. The upper and lower holes allow a maximum distance of 20 cm. This LED TV wall mount is made of aluminium and is mountable to any wall.
The NewStar wall mount, model FPMA-W830Black is a tilt- and swivel wall mount for flat screens up to 24”. This mount is a great choice when you want the ultimate viewing flexibility with your flat screen. Effortless pull the display out from the wall, position it in almost any direction, turn it around corners and then smoothly return it to the wall when finished. NewStars’ tilt (20°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is easily depth adjustable from 4 to 36 centimetres. NewStar FPMA-W830Black has three pivot points and is suitable for screens up to 24" (60 cm). The weight capacity of this product is 12 kg each screen. The wall mount is suitable for screens that meet VESA hole pattern 75x75 and 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates. Create a clean design ambiance for your flat screen TV in the living room, bedroom or home cinema. All installation material is included with the product. Screens: 1 Screen size: 10-24" Max. weight:12 kg Distance to wall: 4-36cm VESA minimum: 75x75mm VESA maximum: 100x100mm Tilt: 20° Swivel: 180°
Screen size (min): 32 Screen size (max): 63 Load (max): 30 Vertical adjustment: 15 Horizontal adjustment: 180 Range (min): 86 Range (max): 640 Accessories included: A set of screws for assembly Dimensions: 450 x 430 x 86-640 mm Other features: - Mounting on 6 pins and a wide wall plate guarantee safety and stability- Built-in spirit level will make installation easier- Leveling +/- 5 degrees - helpful in case of inaccurately drilling installation holes
Screen size (min): 37 Screen size (max): 70 Load (max): 55 Vertical adjustment: 14 Range (max): 25 Accessories included: - Mounting accessories and instruction Dimensions: - Dimensions: 679 x 435 x 25 mm- Maximum distance between mounting holes: 625 x 410 mm- A wall mount part: 679 x 206 mm Other features: Powder coated
Adjustable wall display mounting arm, up to 27”/7 kg Position your screen perfectly Max. weight 7 kg Fits screens sized 17" - 27", 75 mm x 75 mm 100 mm x 100 mm, Colour Black
TV wall mount (tilt), 23”-42” Position your screen perfectly Lightweight and maneuverable design Max. weight 30 kg Fits screens sized 23" - 42", Distance to wall 5.3 cm 75 mm x 75 mm, 100 mm x 100 mm 200 mm x 100 mm, 200 mm x 200 mm Colour Black
DS70-750BL2 Neomounts by Newstar monitor desk mount Neomounts by Newstar DS70-750BL2 full motion monitor desk mount for 17-27" screens - Black Max. weight 7 kg Fits screens sized 17-27", 75 mm x 75 mm 100 mm x 100 mm, Colour Black
Pööratav üliõhuke seinakinnitus - kaugus seinast vaid 13 mm.
Sobib kõigile teleritele mille maksimaalne kaal on 60kg ja kinnitusaukude vahe 300x300mm või 400x400mm.
Sobib kokku Sony soundbari kinnitusega SUWB1.
Maksimaalne pöörderaadius 21 kraadi (sõltuvalt teleri suurusest).
Neomounts by Newstar model LFD-W2640MP is a tiltable wall mount for flat screens up to 75?. The depth of this mount is 8,9 centimetres and also offers the option to store a Mediaplayer or Mini PC. Neomounts by Newstar LFD-W2640MP is suitable for screens up to 75". The weight capacity of this product is 35 kg and is suitable for screens that meet VESA hole pattern 200x200 to 600x400mm. Create a clean design ambiance for your flat screen TV/LFD in public areas. Perfect for digital signage use. All installation material including is included with the product.
Edbak FSM150. Paigaldus: Kruvid, Maksimaalne kaal (mahutavus): 15 kg, Ekraani minimaalne suurus: 81,3 cm (32"), Ekraani maksimaalne suurus: 139,7 cm (55"), Paigaldussüsteemi ühilduvus (min): 75 x 75 mm, Paigaldussüsteemi ...
The multi-port USB-C 5Gbps AXAGON HMC-6GLN GLASS 6in1 hub expands your laptop, computer or phone with six ports. You connect your laptop to the hub via a 20 cm long USB-C cable. You immediately have a connection for a monitor, three USB devices and an RJ-45 connector for a Gigabit Ethernet network. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will provide you with a simple and compact 6in1 docking station for modern laptops. The USB hub offers three USB 5Gbps outputs, two with standard USB-A and a third with USB-C data connector. Transfer rate is up to 5Gb/s thanks to USB 3.2 Gen 1 interface. The hub can permanently connect several external drives simultaneously and also allows charging of phones and tablets with up to 1.5A/5V current. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Another USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD or 1080p/240Hz Full HD and the transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts without limitations. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. The compact aluminum body not only looks great, but also provides mechanical durability and passive cooling. The glossy upper part with a decent backlit logo underlines the premium look of the hub. USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. For the hub to function properly, your laptop's USB-C port must support video output (DisplayPort Alternate Mode or Thunderbolt 3, 4 and above) and Power Delivery powered. The hub can easily connect to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (computer, tablet or phone connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C male connector. Compatible with USB 10Gbps, USB4, Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W, USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (tablet, phone) and the wall charger. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 5Gbps port, USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports. Video output: 1x HDMI port, HDMI A female connector. Maximum supported resolution: 1 monitor - up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD. Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz. To achieve maximum resolution and frequency values on video outputs, the hub must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 3. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.2 (High-bandwidth Digital Content Protection). 2-channel LPCM audio, compressed audio (AC-3, DTC) and HBR audio format support. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T. specifications. 10/100/1000 Mb/s auto-detection. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus (USB bus power). Power supply via PD charger (not included). High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 13 x 110 x 35 mm (H x W x D). Weight 58 g (incl. cable). USB-C cable 20 cm long for connecting the hub to a laptop. Supported operating systems: Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 20 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box with a hanging hole.
The NewStar desk mount FPMA-D935D4 allows you to attach 4 LCD/TFT screens up to 26" on a desk. With this mount you can easily swivel, tilt and rotate the monitor. It has 3 pivots. The height adjustment of 70 cm can be changed manually. The desk mount can hold screens up to 12 kg and is attached on a desk by a clamp. The arm lenght is 50 cm. This model is suited for all LCD/TFT screens with a VESA 75x75 or 100x100 mm hole pattern. If the hole pattern on the back of your screen is different, please contact us for the opportunities. By using an ergonomic monitorarm you prevent neck- and back complaints. Ideal for use in offices, control rooms and on counters or receptions.
TP-LINK TL-WPA4220 AV500 WiFi Powerline Extender Starter Kit TP-LINK s TL-WPA4220KIT extends your Internet connection to every room of the house through your home s existing electrical circuitry. The TL-WPA4220 features a Wi-Fi Clone Button enabling Super Range Extension, which means it can automatically copy the SSID and Password of your router. In this way, TL-WPA4220 simplifies your Wi-Fi configuration and allows for seamless roaming within your home network. Highlights: One Touch Super Range Extension - Wi-Fi Clone Button simplifies your Wi-Fi configuration and helps build a seamless unified home network HomePlug AV standard providing up to 500Mbps high speed data transmission over a home s existing electrical wiring, ideal for lag-free HD or 3D video streaming and online gaming Extend 300Mbps wireless connections to previously hard-to-reach areas of your home and office One Touch Super Range Extension With a Wi-Fi Clone Button enabling Super Range Extension, the TL-WPA4220 can automatically copy the wireless network name (SSID) and Password of your router at the push of a button. After pressing the button, you can place the powerline adapter anywhere you want wired or wireless access and enjoy seamless networking across your entire home or office. Up to 500Mbps - Ideal for HD Video Streaming With advanced HomePlug AV technology, TL-WPA4220KIT provides you with stable, high-speed data transfer rates of up to 500Mbps on a line length of up to 300 meters. It is a great choice for a whole home solution to connect all network compatible devices - from computers, game consoles to set-top boxes for IPTV to printers and NAS hard drives. Extend WiFi Coverage to Every Room With wireless speeds of up to 300Mbps, you can effortlessly extend your WiFi network via the existing powerline and broadcast a wireless signal to share with all your WiFi enabled devices in another area of your home or office. Plug and Play You can set up a hassle-free Powerline network within minutes with TP-LINK s powerline adapters, just plug in
Original part number CS1794-AT-G Product name ATEN CS1794 4-Port HDMI USB 2.0 KVMP Switch, 4x HDMI Cables, 2-port Hub,HD Audio Producer Aten Class of product KVM switches Number of PC ports 4 Supported keyboard/mouse/display ports USB, USB, HDMI Local console's ports 1 x (USB, USB, HDMI) Number of remote users (IP) 0 Type of computer case Desktop Maximal resolution 1920 x 1200 pixels1800 x 1440 pixels Active port selection pushbuttonkeyboard hotkeys Possibility of joining into cascade No Switching audio signal (microphone/speakers) Yes Functions (additional) auto scanning allows easy monitoring of attached computers Standard accessory AC adapterKVM cable 1.8m for PC with HDMI, Audio conectors - 2pcs Width 73 mm Height 45 mm Depth 265 mm Net weight 530 g Additional information Supports two HDMI devices with one USB/HDMI consoleCompatible with Win2k, XP, Vista, Linux, Mac OSDolby True HD & DTS HD Master AudioAdditional audio out for headphones and microphone on front panelCompatible with HDMI 1.3aSupports widescreensSupports different types of miceSupported formats: 480i, 480p, 720p, 1080i i 1080p (HDTV)/ 1920 x 1200 (DVI)2 port hub USB 2,0 for peripheral
Universal range of Vesa mounts and adapter includedFull Internal Cable managementFully height adjustableProfessional industrial casters with brake mechansimTubular chrome pole luxury finish
- High-Definition Multimedia Interface (HDMI) digital audio/video interface cable with mini (C) connector- Supports data transfer bandwidth of up to 10 Gigabits/sec- Allows bi-directional communication between smart HDMI devices- Supports 3D TV with video resolutions up to 3840 x 2160 pixels at 24/25/30 Hz and 4096 x 2160 at 24 Hz- Supports HDMI Ethernet Channel 100 Mbps function (HEC)- Supports Audio Return Channel technology (HARC)Kaabli pikkus3 mPistmik 1HDMI Type A (Standard)Pistmik 2HDMI Type C (Mini)Konnektor 1 suguMeessoostKonnektor 2 suguMeessoostToote värvMustPistmikukontaktide kateKuldHDMI-versioon1.4Andmeedastuskiirus10 Gbit/s3D-ühilduvusJahMaksimaalne resolutsioon4096 x 2160 pikslitRoHS-vastavusJah
Tootja: Gembird Tootegrupp: Switch / Splitter Video seadme tüüp: Splitter video input: 1 video output: 4 resolutsioon: 1920 x 1080 Audio signal switching: Ei RS-232 switching: Ei Video Ühendusi: HDMI Audio Ühendusi: HDMI Port selection: info puudub External IR receiver: Ei Signal range: 10 m Possibility of joining into cascade: Jah Netokaal: 0.28 kg Lisaandmed: Sends a single HDMI signal to 4 separate monitors, projektors või TV’s, The digital 225 MHz ribalaius amplifier increases, the transmission distance koos about 10 meters ja also improves signal quality, toetab 3D video, Perfect for home theatres, class- ja conference rooms, liides standard
Tootja: ART Tootegrupp: televisiooni tarvikud (brackets, stands, shelves) Television tarviku tüüp: Wall bracket Compatible TVs (diagonal screen): 22-55 tolli maksimaalne load: 35 kg kirjeldus: Standard VESA, The Maksimum hole under the handle Lisainfo: ART Multimedia
TV stand Techly ICA-TR16T, P/N: 105643 Mobile LED/LCD TV stand 37 - 70 50kg with AV component shelf and camera shelf, adjustable Allows secure mounting of large LED/LCD/PDP displays or TVs Compatible with most flat and curved displays Steel construction ensures maximum security VESA standard display mount Display angle can be adjusted Three-stage height adjustment of the display Equipped with height-adjustable shelf for AV components Additional height-adjustable top camera shelf Integrated cable management system Sturdy base with castors for easy mobility
Wall/LCD holder 19-37 inches, double arm, adjustable, white- Enables safe mounting on the wall of the LED / LCD display or TV- Steel construction guarantees maximum safety- Mounting the display in the VESA standard- Two-hinged boom with adjustable distance from the wall- Adjustable tilt angle- Adjustable rotation in the horizontal plane- Ideal for use at home, in the office and for commercial installations
