Full-motion TV wall mount, 23”-42” - Position your screen perfectly - Lightweight and maneuverable design - Single-arm full-motion TV wall mount - Supports most 23” - 42” LCD TV’s - VESA compatible, max. 200 x 200 mm - Wall distance 56 - 300 mm - Allows up to 180 degrees swivel and 13 degrees tilting - Practical integrated bubble level for perfect alignment - Includes all necessary installation materials
Single touch SmartFit height adjustable monitor arm Improve your posture, promote correct eye alignment, and provide neck and shoulder comfort with the Kensington SmartFit Single Monitor Arm with one-touch height adjustment. Ergonomically designed to promote well-being and increase productivity, the single-touch SmartFit One-Touch Height Adjustable Arm features Kensington's patented SmartFit technology, which simplifies proper fit and allows users to adjust the monitors' height, depth and angle for individual comfort. Stable in any monitor position, users can easily switch from landscape to portrait mode. The SmartFit system simplifies perfect ergonomic height positioning, using scientifically proven research to support proper fit. One-touch adjustable arm with built-in gas spring for easy height adjustment (6.7-19.9 or 170-505mm), 180° swivel and monitor rotation, +/- 90° tilt adjustment and smooth monitor upward movement, down, forward and backward for full articulation of movement. The stability-focused design supports flat or curved 13-32 monitors weighing up to 19.8 lbs (9 kg) and keeps the monitor stable and stable in any position. Easy installation with included quick release detachable VESA plate (75mm or 100mm), c-clamp (tabletop thickness range: 0.393.3 or 10mm85mm) and grommet (diameter range: 0.411.97 or 10.550mm)) installation options and included a set of tools for easy disassembly. The cable management system keeps your monitor cables tidy for a tidy workspace. Kensington Durability meets ANSI/BIFMA performance and security standards. SmartFit system Simplifies perfect ergonomic height positioning with scientifically proven research to support proper fit. One-touch adjustable arm with built-in gas spring Full motion articulation allows you to easily adjust the position of the monitor on your workstation. Move your monitor up, down, forward and backward with 6.7-19.9 or 170mm-505mm height adjustment, 180° swivel and swivel, and +/- 90° tilt adjustment. Stability focused design Supports flat or curved 13-32 monitors weighing up to 19.8 lbs (9 kg) and keeps monitors stable in any position. Easy to install Includes detachable VESA quick release (75mm or 100mm), c-clamp (tabletop thickness range: 0.393.3 or 10mm85mm) and grommet (diameter range: 0.411.97 or 10.5mm50mm), and included tool kit for easy disassembly. Cable management system Keeps monitor cables tidy for a tidy workspace. Kensington Durability Tested to ANSI/BIFMA performance and safety standards.
The multi-port USB-C 5Gbps AXAGON HMC-10HLS LONGER hub 9in1 expands your laptop, computer or phone with nine ports. You can easily and quickly connect a monitor, four USB devices, Gigabit Ethernet network and an SD card reader to your computer via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will thus provide you with a simple and compact 9in1 docking station not only for Windows laptops but also for Apple laptops such as MacBook Air or MacBook Pro. The USB hub offers four 5 Gbps USB outputs with standard USB-A connectors. The hub can also handle permanent connection of three external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub can also charge mobile phones and tablets connected to the hub's USB ports with a current of up to 1.5A/5V. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. One of the USB-C connectors is used to connect to the laptop with the included 25 cm long cable with a reversible USB-C connector on both ends. The second USB-C connector is reserved only for powering and simultaneous charging of phone or laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port and above. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. The package includes extensions that allow the hub to be used as a pad under the laptop, which will ensure better cooling thanks to greater airflow under the laptop. At the same time, it improves ergonomics at your workplace. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (laptop connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W (only for charging), USB-A female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 4x USB 5Gbps port, USB-A female connector. USB-C hub handle the connection of two external drives simultaneously. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A and USB-C ports. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 60Hz. 2K / WQHD resolution 2560 x 1440 at up to 120Hz. FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Wake-on-LAN support. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. UHS-I support. Speed up to 104 MB/s. Support hardware ECC function and CRC function. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. The blue LED indicates with constant light the hub connection to the computer. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 283 x 42 x 17 mm. Weight 133 g. USB-C male cable length 25 cm Supported operating systems: Microsoft Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated operating systems, and support from the device (laptop, phone) is also required. Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub, USB-C cable 25 cm long, pedestals for raising, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.
Pööratav üliõhuke seinakinnitus - kaugus seinast vaid 13 mm.
Sobib kõigile teleritele mille maksimaalne kaal on 60kg ja kinnitusaukude vahe 300x300mm või 400x400mm.
Sobib kokku Sony soundbari kinnitusega SUWB1.
Maksimaalne pöörderaadius 21 kraadi (sõltuvalt teleri suurusest).
Universal wall mount for 42″ ﾀﾓ 60″ plasma/LCD screens, maximum weight up to 80 kgQuick and easy installationRobust and durable design with powder-coated metal elementsLock screws prevent the screen from accidentally fallingThe support plate features multiple hole types for different installation types, including brickwork, concrete and wooden wallsConforming to VESA 100×100, 200×100, 200×200, 400×200, 400×400 oraz 600×400 mm
Kodukino:Heliriba; Koguvõimsus:250; Kujutise parandamine Ultra HD tasemeni:Ei; Karaoke:Ei; Smart:Chromecast built-in, Spotify Connect, Music Service Button, Works with Google Assistant,AirPlay2; Bluetooth:Jah, sisseehitatud; Traadita ühendus...
Adjustable desk mount with monitor arm and notebook tray Position your screen perfectly to reduce neck and eye strain Increase your productivity by taking advantage of dual screen setup Max. weight 9 kg Fits screens sized 17" - 32", 75 mm x 75 mm 100 mm x 100 mm, Colour Black
Multiport USB-C 5Gbps TRIPLE 4K DISPLAY hub AXAGON HMC-4KX3 expands your laptop with nine ports and memory card reader SD / microSD. You can easily and quickly connect up to three monitors, three USB devices, a Gigabit Ethernet network, headphones and card reader to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a universal and powerful 11in1 docking station for modern laptops. The USB hub offers three USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The USB-C connector is reserved only for powering and simultaneous charging of laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one USB-C port. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger. Each of the three video outputs (2x HDMI + 1x DisplayPort) provides a high-quality image up to 4K/60Hz Ultra HD resolution. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Even when three monitors are connected at the same time, the docking station can provide a resolution of up to 4K/30Hz on each of them. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3/4 port is necessary for the proper function of video output. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. Gigabit network card extends your computer by a fast network connection, adds the missing RJ-45 network connector or another network card. Card reader supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. High data transfer speed ensured by USB 3.2 Gen 1 interface. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The robust aluminum body ensures mechanical resistance and quality cooling of the docking station. The wedge shape of the hub encourages its use as a laptop pad for better cooling and ergonomic positioning. Also, the included USB-C cable is designed to use the hub as a laptop pad, the optimal length of 40 cm together with the curved connector allows it to be almost entirely hidden under the laptop and contribute to the impression of a clean desk. The USB-C cable is detachable and can be replaced with a longer cable if needed. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. Input: USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Compatible with Thunderbolt 3/4. Connection via reversible USB type C female connector. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 480Mbps port, USB-A female connector. 1x Power Delivery port (power only), USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports. Video outputs: 2x HDMI port, HDMI A female connector. 1x DP port, DisplayPort female connector. Video resolution:1 connected monitor in any of the video ports: 4K resolution 4096 x 2160 at up to 60Hz. * 2K / WQHD resolution 2560 x 1440 at up to144Hz (Mac via DP up to 165Hz). * FHD resolution 1920 x 1080 at up to 240Hz (Mac max. 144Hz). *2 simultaneously connected monitors - up to 4K/60Hz on one monitor and 4K/30Hz on the other monitor. *3 simultaneously connected monitors - up to 4K/30Hz on all monitors. ** Valid for connection to a computer with DisplayPort version 1.4. Display mode support in Windows: Mirroring or expanding the surface of the primary monitor on each of up to three connected monitors. Each of the connected monitors can display either the mirrored or extended surface of the primary monitor as needed, e.g. one monitor will display the mirrored surface of the primary monitor and the other two monitors will display two different extended surfaces. Display mode support in MacOS: Mirroring the surface of the primary monitor on all up to three connected monitors. Expansion of the primary monitor area on one of the connected monitors + mirroring of the primary monitor area on up to two other connected monitors. Expanding the area of the primary monitor on one of the connected monitors + mirroring the extended area of the first monitor on up to two other connected monitors. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. A suitable OS is also required. The video output function will not be available without these requirements. HDR (High dynamic range, 10-bit support) support - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Support for 2-channel audio sampling rate up to 48kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN function in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, ECMA-393 proxZzzy for sleeping hosts, RealWoW! and also Link Change Wake-up. Advanced Power Management features: The adapter supports advanced power management and supports advanced power saving e.g. when the Ethernet cable disconnection. Supported Power Management technologies are e.g. Advanced Configuration Power management Interface (ACPI), Link Power Management (LPM) or IEEE 802.3az EEE (Energy Efficient Ethernet) and others.Two LEDs to indicate network activity and connection of the adapter to USB and network. Audio output / input: 1x 3.5 mm jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel aalog mono microphone input 48 kHz @ 16 bit for recording. The card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash. SD slot: Digital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB), MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 100W - 20V/5A. Required PD support from the device (laptop, phone) and a suitable PD wall charger. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminum body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 256 x 90 x 23 mm. Weight 317 g (without cable). USB-C male / male cable length 40 cm. Supported operating systems: Microsoft Windows 10 / 11, Mac OS, Linux, Android and Chrome OS. Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer.
The Neomounts by Newstar FL55-875WH1 is a mobile floor stand for displays up to 100" with a maximum weight capacity of 110 kg. The trolley has 65 cm motorized height adjustment (35 mm/second), is operated with a wired remote control and features an anti-collision system for extra safety. A lockable, ventilated hardware compartment with cable opening is included and optional for installation. The trolley features practical handles and four solid 10 cm double locking caster wheels that allow you to move and use the floor stand wherever you like. Due to the large caster wheels, thresholds or carpets are no challenge to the FL55-875WH1. The open design wheelbase allows easy access to the (touch) display and enables easier movement around objects. The included cable duct, optional to install, conceal and route cables from floor stand to screen. A practical cable management bracket at the back of the trolley ensure easy and safe relocation. Additionally, at the bottom of the trolley a space with tie wrap holes is available to install a power strip. The floor stand is packed partially pre-assembled, to ensure fast and easy installation. The display can be secured by locking the brackets using a padlock (not included). Additionally, the FL55-875WH1 is compactly packed for optimized transportation and storage. The AFL-875WH1 videobar & multimedia kit is optionally available and enables the installation of a separate cam shelf and multimedia device shelf to the trolley. Included to the kit is an adapter for the Logitech Rally Bar (Mini). In addition, the multimedia shelf is suitable for installation of i.a. the Logitech Tap.
A modern USB-C -> HDMI active adapter AXAGON RVC-HI2M for connecting an HDMI /TV/projector to a notebook or mobile phone using USB-C connector. A small hardware converter ensures quality image up to 4K/60Hz Ultra HD resolution without any installation. Popular gaming resolution WQHD 2560 x 1440px at 60, 120, 144 Hz or FullHD 1920 x 1080px at 60, 100, 120, 144 and 240 Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. The converter is equipped with solid metal ends, connectors with a nickel-plated surface and gold-plated contacts. The final strength of the cable is provided by the nylon braid. Video and audio transfer from a computer, laptop, phone or Apple MacBook will now be easy. The adapter is only oneway, i.e. USB-C to HDMI, not otherwise. An USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support of a device with Thunderbolt 3/4 port is required for the adapter to function properly. Input: USB-C USB type C (M) male connector Output: HDMI v2.1a 4K/60Hz HDR10 (before 2.0a) HDMI (F) female connector Supported resolutions: max. 4096 x 2160 (19:10) @60Hz DCI 4K 3840 x 2160 (16:9) @60Hz UHD-1 4K (UHDTV) 3840 x 1600 (21:9) UW 4K (Ultrawide 1600p) 3840 x 1200 (32:10) 29:9 4K (Super ultrawide 1200p) 3840 x 1080 (32:9) 32:9 4K (Super ultrawide 1080p) 3440 x 1440 (21:9) UWQHD (Ultrawide 1440p) 2560 x 2048 (5:4) QSXGA 2560 x 1920 (4:3) 2560 x 1600 (16:10) WQXGA 2560 x 1440 (16:9) @60, 120 a 144Hz QHD 2560 x 1080 (21:9) UWFHD (Ultrawide 1080p) 2048 x 1536 (4:3) QXGA 2048 x 1152 (16:9) QWXGA 1920 x 1440 (4:3) 1920 x 1200 (16:10) WUXGA 1920 x 1080 (16:9) @60, 100, 120, 144 a 240Hz Full HD/1080p 1856 x 1392 (4:3) 1792 x 1344 (4:3) 1680 x 1050 (16:10) WSXGA+ 1600 x 1200 (4:3) UXGA 1600 x 900 (16:9) HD+ 1536 x 864 (16:9) 1440 x 900 (16:10) WXGA+ 1400 x 1050 (4:3) SXGA+ 1366 x 768 (16:9) HD 1360 x 768 (16:9) HD 1280 x 1024 (5:4) SXGA 1280 x 960 (4:3) SXGA- 1280 x 800 (16:10) WXGA 1280 x 768 (5:3) WXGA 1280 x 720 (16:9) HD/WXGA/720p 1280 x 600 1152 x 864 (4:3) XGA+ 1024 x 768 (4:3) XGA 800 x 600 (4:3) SVGA* the resolution depends on monitor/TV/projector and graphics adapter parameters. Other features: Supported modes: mirroring the desktop (default setting), extension of the primary monitor area. HPD (Hot-Plug-Detect) support - communication sequence controlling the connection/disconnection of the device while running, Support up to 8-channel sound - 96 kHz at 24 bits, HDR10 (High dynamic range, 10 bit support) support - realistic reproduction of light and dark details. Compliant with USB Type-C Cable and Connector Specification Revision 1.1 specification, Compliant with VESA DisplayPort Alt Mode on USB Type-C Standard Version 1.0 specification, Compliant with USB Device Class Definition for Billboard Devices Revision 1.0 specification. Compliant with HDMI Specification 2.1a 4K/60Hz HDR10 specification (before HDMI 2.0a). TMDS (Transition Minimized Differential Signaling) support - transfer of auxiliary image, sound and additional data. HDCP 2.2 (High-bandwidth Digital Content Protection) support - a mechanism used to protect the digital contents. Support of power saving modes with spinning down controlled by a source device (PC) and a viewing device (monitor/TV). Power supply via USB-C no external power is needed. Dimensions of converter body 65 x 22 x 10 mm. Total length incl. cable and connector 25 cm. Weight only 23 g. Operating temperature 0 ~ 45°C. Storage temperature: -10 ~ 70°C. Supported OS: Microsoft Windows, macOS, Android and Chrome OS updated. Compatibility depends on the operating system and device manufacturer support. Graphics card drivers may also affect RVC-HI2M functionality. We recommend downloading the latest version of the drivers. Package contains: USB-C > HDMI adapter, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.
DS45-430BL12 Neomounts TV desk stand Neomounts DS45-430BL12 TV desk stand for 23-43" screens - Black The Neomounts DS45-430BL12 is a TV desk stand for screens up to 43” with a weight capacity of 40 kg. The TV stand features a practical swivel option (70°) to easily position the TV in the optimum viewing angle. Additionally, the TV desk stand can be adjusted in height in one of the three pre-set positions. The hefty glass base of the DS45-430BL12 provides extra screen stability, even at maximum size and weight. It provides an excellent solution for users who prefer not to drill holes in walls or for those who no longer have the original TV stand. In addition, the DS45-430BL12 also offers flexibility in screen use, as the TV stand can be moved to different places as desired. The DS45-430BL12 is suitable for screens that meet pattern 100x100 to 200x200 mm. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available. Cables can be routed neatly thanks to the practical cable clips.
Original part number CS1792-AT-G Product name ATEN CS1792 2-Port HDMI USB 2.0 KVMP Switch, 2x HDMI Cables, 2-port Hub,HD Audio Producer Aten Class of product KVM switches Number of PC ports 2 Supported keyboard/mouse/display ports USB, USB, HDMI Local console's ports 1 x (USB, USB, HDMI) Number of remote users (IP) 0 Type of computer case Desktop Maximal resolution 1920 x 1200 pixels1800 x 1440 pixels Active port selection pushbuttonkeyboard hotkeys Possibility of joining into cascade No Switching audio signal (microphone/speakers) Yes Functions (additional) auto scanning allows easy monitoring of attached computers Standard accessory AC adapterKVM cable 1.8m for PC with HDMI, Audio conectors - 2pcs Width 73 mm Height 45 mm Depth 205 mm Net weight 420 g Additional information Supports two HDMI devices with one USB/HDMI consoleCompatible with Win2k, XP, Vista, Linux, Mac OSDolby True HD & DTS HD Master AudioAdditional audio out for headphones and microphone on front panelCompatible with HDMI 1.3aSupports widescreensSupports different types of miceSupported formats: 480i, 480p, 720p, 1080i i 1080p (HDTV)/ 1920 x 1200 (DVI)2 port hub USB 2,0 for peripheral
The Multibrackets M Universal Wallmount Fixed Small is a low profile fixed wall mount for 24" to 55" flat-panel TVs up to 50 kg. Its flush design allows it to sit just 23mm from the wall focusing looks on your TV and not the mount. Its solid construction of steel is both strong and durable. After installation the TV can slide left and right on wall plate after mounting and thus give the end-user a possibility to perfect position the TV after installing it. The quick release straps on the mounting brackets stays hidden with Multibrackets Smart magnet system, but are when needed easily pulled down to unlock the TV from the wall plate for cable access. Holds TVs up to 55" or 50kg Supports VESA up to 200x200 Low profile design offers sufficient room for cable connections and cooling Multibrackets straps with smart magnets makes single-person installation possible Open frame provides ample room for power and A/V cutouts behind TV Vertical rails slide on wall plate for minor left/right lateral shift after installation Full hardware kit included
NS-DPOS100BLACK NewStar flat screen desk mount Newstar Desk Mount (bolt down) for 10-32" Monitor Screen - Black The NewStar desk mount, model NS-DPOS100BLACK is a tilt-, swivel and rotatable desk mount for flat screens up to 32?. This mount is a great choice for space saving placement on desks and counters using a bolt-down base. NewStar's versatile tilt (60°), rotate (360°) and swivel (360°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. Ideal for use in offices and on counters or in a reception area. NewStar NS-DPOS100BLACK is suitable for screens up to 32". The weight capacity of this product is 15 kg. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates. Min. screen size: 10 inch Max. screen size: 32 inch Functionality Type: Tilt, Rotate, Turn Tilt (degrees): 60° Swivel (degrees): 360° Rotate (degrees): 360° Height: 44 cm Height adjustment: None
Kasuta seda Vogel´s kvaliteetset seinakinnitust, et asetada oma soundbar seinale ning suunata see alati täpselt enda poole, et saada maksimaalselt parim video- ja helikogemus. Seinakinnitus sobib enamikele populaarsematele tootja soundbaridele - Sonos, Bose, Samsung, LG, Heos, Panasonic, JBL, Harman and Kardon, Yamaha ja paljud teised. Kinnitus suudab kanda kuni 6,5 kg soundbari.
Product kirjeldus: DIGITUS DA-90401 - stand - for 2 monitors / curved monitors Product Type: Stand - desktop stand mõõtmed (WxDxH): 89.3 cm x 28 cm x 41.5 cm Rotation: 360° pöördepea: 270° Adjustments: Height, swivel, rotation kaal: 3.9 kg Recommended Use: 2 monitors / curved monitors Recommended Display Size: 15"-32" VESA kinnitusing liides: 100 x 100 mm, 75 x 75 mm Max Load kaal: 16 kg Material: Steel värv: matt must
The NewStar floor stand, model PLASMA-M1900E is a mobile floor stand for flat screens up to 70" (178 cm). This mobile stand is a great choice for space saving placement or when wall-, ceiling mounting or desk placement is not an option. This cart stretches your investment by serving a variety of projection needs by sharing a large display over multiple rooms. Get optimal positioning for both standing and seated audiences, in any application, in any part of your location. NewStar's versatile tilt (20°) and turn (90°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is manually height adjustable from 130 to 162 centimetres. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the stand nice and tidy. NewStars' floor stand, PLASMA-M1900E holds your TV, AV equipment and even hides your cables. The casters allow the stand to move it to where you need it. Easily roll this cart through doorways and over thresholds. NewStar PLASMA-M1900E is suitable for screens up to 70" (178 cm). The weight capacity of this product is 50 kg each screen. The stand is suitable for screens that meet VESA hole pattern 200x200 to 600x400mm. Different hole patterns can be covered using NewStar VESA adapter plates. Speedy assembly and installation. All installation material is included with the product. Min. screen size: 37 Max. screen size: 70 Mount: Floor Tilt (degrees):20° Rotation (degrees): 90° Height adjustment: Manual Height: 130 - 162 cm
