A modern USB-C -> HDMI active adapter AXAGON RVC-HI2M for connecting an HDMI /TV/projector to a notebook or mobile phone using USB-C connector. A small hardware converter ensures quality image up to 4K/60Hz Ultra HD resolution without any installation. Popular gaming resolution WQHD 2560 x 1440px at 60, 120, 144 Hz or FullHD 1920 x 1080px at 60, 100, 120, 144 and 240 Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. The converter is equipped with solid metal ends, connectors with a nickel-plated surface and gold-plated contacts. The final strength of the cable is provided by the nylon braid. Video and audio transfer from a computer, laptop, phone or Apple MacBook will now be easy. The adapter is only oneway, i.e. USB-C to HDMI, not otherwise. An USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support of a device with Thunderbolt 3/4 port is required for the adapter to function properly. Input: USB-C USB type C (M) male connector Output: HDMI v2.1a 4K/60Hz HDR10 (before 2.0a) HDMI (F) female connector Supported resolutions: max. 4096 x 2160 (19:10) @60Hz DCI 4K 3840 x 2160 (16:9) @60Hz UHD-1 4K (UHDTV) 3840 x 1600 (21:9) UW 4K (Ultrawide 1600p) 3840 x 1200 (32:10) 29:9 4K (Super ultrawide 1200p) 3840 x 1080 (32:9) 32:9 4K (Super ultrawide 1080p) 3440 x 1440 (21:9) UWQHD (Ultrawide 1440p) 2560 x 2048 (5:4) QSXGA 2560 x 1920 (4:3) 2560 x 1600 (16:10) WQXGA 2560 x 1440 (16:9) @60, 120 a 144Hz QHD 2560 x 1080 (21:9) UWFHD (Ultrawide 1080p) 2048 x 1536 (4:3) QXGA 2048 x 1152 (16:9) QWXGA 1920 x 1440 (4:3) 1920 x 1200 (16:10) WUXGA 1920 x 1080 (16:9) @60, 100, 120, 144 a 240Hz Full HD/1080p 1856 x 1392 (4:3) 1792 x 1344 (4:3) 1680 x 1050 (16:10) WSXGA+ 1600 x 1200 (4:3) UXGA 1600 x 900 (16:9) HD+ 1536 x 864 (16:9) 1440 x 900 (16:10) WXGA+ 1400 x 1050 (4:3) SXGA+ 1366 x 768 (16:9) HD 1360 x 768 (16:9) HD 1280 x 1024 (5:4) SXGA 1280 x 960 (4:3) SXGA- 1280 x 800 (16:10) WXGA 1280 x 768 (5:3) WXGA 1280 x 720 (16:9) HD/WXGA/720p 1280 x 600 1152 x 864 (4:3) XGA+ 1024 x 768 (4:3) XGA 800 x 600 (4:3) SVGA* the resolution depends on monitor/TV/projector and graphics adapter parameters. Other features: Supported modes: mirroring the desktop (default setting), extension of the primary monitor area. HPD (Hot-Plug-Detect) support - communication sequence controlling the connection/disconnection of the device while running, Support up to 8-channel sound - 96 kHz at 24 bits, HDR10 (High dynamic range, 10 bit support) support - realistic reproduction of light and dark details. Compliant with USB Type-C Cable and Connector Specification Revision 1.1 specification, Compliant with VESA DisplayPort Alt Mode on USB Type-C Standard Version 1.0 specification, Compliant with USB Device Class Definition for Billboard Devices Revision 1.0 specification. Compliant with HDMI Specification 2.1a 4K/60Hz HDR10 specification (before HDMI 2.0a). TMDS (Transition Minimized Differential Signaling) support - transfer of auxiliary image, sound and additional data. HDCP 2.2 (High-bandwidth Digital Content Protection) support - a mechanism used to protect the digital contents. Support of power saving modes with spinning down controlled by a source device (PC) and a viewing device (monitor/TV). Power supply via USB-C no external power is needed. Dimensions of converter body 65 x 22 x 10 mm. Total length incl. cable and connector 25 cm. Weight only 23 g. Operating temperature 0 ~ 45°C. Storage temperature: -10 ~ 70°C. Supported OS: Microsoft Windows, macOS, Android and Chrome OS updated. Compatibility depends on the operating system and device manufacturer support. Graphics card drivers may also affect RVC-HI2M functionality. We recommend downloading the latest version of the drivers. Package contains: USB-C > HDMI adapter, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.
Full-motion TV wall mount, 32" - 75'' Position your screen perfectly Lightweight and maneuverable design Premium double arm full-motion TV wall mount Supports most 32” - 75” LCD/LED TV’s VESA compatible, max. 600 mm x 400 mm Wall distance 55 - 490 mm Allows up to 100 degrees rotation and 13 degrees tilting Practical cable guides on the arms Suitable for corner installation Includes all necessary installation materials
Neomounts by Newstar TV/monitor ceiling mount Neomounts by Newstar FPMA-C340DBLACK full motion dual TV/monitor ceiling mount for 32-75" screens - Black Functionality: Type: Tilt, Swivel Height adjustment: 106-156 cm Tilt (degrees): 10° Swivel (degrees): 360° Rotate (degrees): 6° Height: 178,5 cm Adjustment type: Manual
Techly ICA-TR45 stand, PN: 360752 mobile stand for TV or LED/LCD/PDP interactive display 52 110 to 120kg with infinitely adjustable height, shelf for AV components and camera Infinitely adjustable in height The Techly ICA-TR45 Mobile Stand is one of the few products available on the market with an infinite display height adjustment system, making it ideal for use with monitors and interactive displays for different age groups in educational and educational establishments. Height adjustment from 1610 to 1910 mm is achieved by inserting a crank into a special opening in one of the vertical columns, and then spinning to the right or left to raise or lower the display. The infinitely adjustable height of the Techly ICA-TR45 Stand eliminates the need to remove the monitor and unscrew the screws when adjusting, changing the height of the display requires no tools. Robust mobile stand To provide the user with the comfort of both mobility and safety, the Techly ICA-TR45 TV Stand is equipped with a really sturdy and robust mobile base on four castors, which allows the stand to be moved effortlessly to a convenient location, even with the display installed and AV equipment connected. The highest quality materials used in the manufacturing process of the stand itself as well as the castors guarantee its smooth and stable movement on any flat surface. For maximum safety, two of the four castors have a powerful brake that permanently locks the stand in position. Camera shelf With a camera shelf positioned above the display and equipped with height adjustment, the Techly ICA-TR45 Mobile LED/LCD/PDP TV Stand is the ideal tool to facilitate two-way audio-visual communication online. Quick, simple and correct placement of the camera on the shelf will ensure that your fellow caller sees exactly what you want to show them. AV component shelf The Techly ICA-TR45 Mobile TV and Interactive Monitor Stand is also equipped with a robust AV component shelf with a load capacity of up to 7kg, which can easily accommodate a source device such as a notebook or DVD player. Thanks to the AV component shelf, the stand is also ideal for conducting various types of training or conferences, as well as in places where advertising or marketing content is displayed that requires the free connection of a signal source device. Universal VESA mount The Techly ICA-TR45 Mobile Stand is compatible with the majority of TVs, LED and LCD displays as well as interactive monitors available on the market with a diagonal screen size of 52 to 110 and a weight not exceeding 120kg, having the VESA mounting standard from 200x400 to 1000x600 inclusive. Enables simple and safe mounting of a large LED/LCD display, TV or interactive whiteboard. Top quality steel construction guarantees maximum safety Infinitely adjustable display height, no tools required Mounting of display in VESA standard Equipped with a shelf for AV components Additional top shelf dedicated to camera installation Mobile base on castors for easy movement of the stand and its equipment Castors with brakes ensure that the stand is securely locked in position Integrated cable management system allows connection cables to be neatly hidden Ideal for use with interactive whiteboards and monitors in educational establishments Ideal for displaying marketing and advertising content, as well as for training rooms
The NewStar LED TV wall mount, model LED-W220, allows you to mount a LED TV to any wall. Cause of the flexible hole pattern of this system is this wall mount useable for almost every LED TV up to 40 inches. This wall mount allows users to tilt screens up to 20 degrees. This wall mount is easily to install by using the VESA hole pattern at the rear side of your TV. This wall mount can be used when the maximum distance between the holes (left to right) is 20 cm. The upper and lower holes allow a maximum distance of 20 cm. This LED TV wall mount is made of aluminium and is mountable to any wall.
Max. weight 12 kg|Screen size range 10-24"|75 mm x 75 mm|100 mm x 100 mm|Colour Black Max. weight 12 kg Screen size range 10-24" 75 mm x 75 mm Yes 100 mm x 100 mm Yes Colour Black Shipping box quantity 1 Unit Brutto Volume 0,002309 cubm Unit Net Weight 0,9 kg Unit Gross Weight 0,941 kg
Max. weight 20 kg|Screen size range 10-30"|50 mm x 50 mm|100 mm x 100 mm|Colour Black Max. weight 20 kg Screen size range 10-30" 50 mm x 50 mm Yes 100 mm x 100 mm Yes Colour Black Shipping box quantity 5 Unit Brutto Volume 0,009565 cubm Unit Net Weight 1,8 kg Unit Gross Weight 2,2 kg
Durable polished aluminum construction! Tested to perform 10 times the expected life-cycle of other competitive brands at roughly half the price.Sleek and streamlined, the LX frees up space and allows positioning of your display for greater productivity. Reposition your LCD with just a touch. Up. Down. Forward. Back. The LX provides unparalleled range of motion.Benefits- Increase viewing comfort—help reduce eye, back and neck strain- Upgrade LCD monitors and TVs with improved ergonomic adjustment- Patented CF motion technology provides premium ease-of-use display adjustment- Cable management feature routes cables under the arm, out of the way- Extends LCD up to 25" (64 cm); push your display out of the way when not in use- 13" (33 cm) height range meets the ergonomic needs of more than nine out of ten adults- Arm folds back over the base into a compact retracted position; perfect for tucking under systems furniture storage shelves or cabinets in space constrained areasMaksimaalne kaal (mahutavus)9,1 kgMaksimaalne ekraanisuuruse sobivus81,3 cm (32")Paigaldussüsteemi ühilduvus (min)75 x 75 mmPaigaldussüsteemi ühilduvus (max)100 x 100 mmToetatud ekraanide arv1Kõrguse reguleerimise ulatus0 - 330 mmKaldenurk75Liikumisulatus360Rotatsiooni nurk360°Toote värvMustPakendi kaal4,4 kgTõstekõrgus33 cmPakendi mõõtmed (l x s x k)290 x 180 x 650 mmKaal (mittemeetriline)9.75
Tootja: ART Tootegrupp: televisiooni tarvikud (brackets, stands, shelves) Television tarviku tüüp: Wall bracket Compatible TVs (diagonal screen): 42-70 tolli maksimaalne load: 100 kg kirjeldus: The patented system of vertikaalne adjustment värv: must laius: 918 mm kõrgus: 530 mm sügavus: 80 mm Netokaal: 7.15 kg Lisainfo: ART Multimedia
Wall/LCD holder 19-37 inches, double arm, adjustable, white- Enables safe mounting on the wall of the LED / LCD display or TV- Steel construction guarantees maximum safety- Mounting the display in the VESA standard- Two-hinged boom with adjustable distance from the wall- Adjustable tilt angle- Adjustable rotation in the horizontal plane- Ideal for use at home, in the office and for commercial installations
Desktop holder for 2 monitors, The maximum hole under the handle: 100x100, 75x75, Adjust the vertical (slope): -50 to 35 degrees, Adjusting the level (rotation): 360 degrees, Attaching to the table, System to hide wires, Built in gas spring, Pivot function, Built-in 2 fast USB 3.0 ports for easy connection of external devices to your computer., Mounting screw set
The Neomounts by Newstar desk mount, model FPMA-D860BLACK is a tilt-, swivel and rotatable desk mount for flat screens up to 32?. This mount is a great choice for space saving placement on desks. Neomounts' versatile tilt (20°), rotate (360°) and swivel (20°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is manually height adjustable from 26 to 45 centimetres. Depth 5 centimetres. Neomounts FPMA-D860BLACK has one pivot point and is suitable for screens up to 32" (81 cm). The weight capacity of this product is 8 kg each screen. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using Neomounts by Newstar VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area. All installation material is included with the product. - Screen size : 10 - 32" - Desk mount: Desk clamp & grommet - Depth: 5 cm - Height: 26 - 45 cm - Tilt: 20° - Rotation: 360° - Swivel: 20° Max. weight 8 kg Fits screens sized 10 - 32", 75 mm x 75 mm 100 mm x 100 mm, Colour Black
Multiport USB-C 3.2 Gen 1 hub AXAGON HMC-HCR3A expands your laptop, computer or phone with four ports and SD / microSD card reader. Through the double-sided USB-C connector, you can easily and quickly connect three USB devices, memory cards and an HDMI display to the computer at the same time. The USB-C hub will provide you with a simple and compact 5in1 docking station for notebook. The USB hub offers three USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. Popular gaming resolution WQHD 2560 x 1440px at 60Hz or FullHD 1920 x 1080px at 60, 100 and 120Hz max. are also supported. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Card reader supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. High data transfer speed ensured by USB 3.2 Gen 1 interface. The card reader enables simultaneous handling of cards in both slots and direct copying between them. Elegant aluminum body ensures mechanical resistance and quality cooling. The finely structured surface with no fingerprint remains will also please you. Port replicator is an ideal accessory for laptops without USB-A connectors, card reader and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. You can connect a flash drive, keyboard, mouse, monitor, TV or projector to your phone. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Compatible with Thunderbolt 3. Connecting USB type C male connector on a fixed 20 cm long cable. USB outputs: 3x SuperSpeed USB port, USB-A female connector. Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit/s). USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A in each of the hub's USB ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port). HDMI output: HDMI. HDMI A (F) female connector. Maximum supported resolution 4K / 4096 x 2160 at 30 Hz. WQHD resolution 2560 x 1440 at 60 Hz max. FullHD resolution 1920 x 1080 at 60, 100, 120 Hz max. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Correct OS is also necessary. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Support up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio formats. Support sampling rate up to 192kHz and up to 24-bit audio depends on source and end device, i.e. laptop/phone and TV/monitor/ AV receiver. The card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash, SD slot: Digital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB), MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus (USB bus power). Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. White LED indicates the connection to the computer's USB port. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions 110 x 35 x 12.5 mm. Weight 58 g (incl. cable). USB cable length 20 cm. Supported operating systems: Microsoft Windows 10, 11, Mac OS, Linux, Android and Chrome OS. Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Package contains: USB-C hub with fixed 20 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.
Edbak VWPOP95-L. Tüüp: Fikseeritud, Toote värv: Must, Kaldenurk: 0 - 20°. Maksimaalne kaal (mahutavus): 130 kg, Ekraani maksimaalne suurus: 2,41 m (95"), Kinnituse tüüp: Sein. Laius: 1083 mm, Sügavus: 100 mm, Kõrgus: 701 mm. ...
Neomounts by Newstar model LFD-W2640MP is a tiltable wall mount for flat screens up to 75?. The depth of this mount is 8,9 centimetres and also offers the option to store a Mediaplayer or Mini PC. Neomounts by Newstar LFD-W2640MP is suitable for screens up to 75". The weight capacity of this product is 35 kg and is suitable for screens that meet VESA hole pattern 200x200 to 600x400mm. Create a clean design ambiance for your flat screen TV/LFD in public areas. Perfect for digital signage use. All installation material including is included with the product.
Max. weight 50 kg | Fits screens sized 37" - 80" | 200 mm x 200 mm | 300 mm x 200 mm | 300 mm x 300 mm | 400 mm x 200 mm | 400 mm x 300 mm | 400 mm x 400 mm | 600 mm x 400 mm | Dimensions 620 x 685 x 425 mm | Colour Black
The multi-port USB-C 5Gbps AXAGON HMC-6GLN GLASS 6in1 hub expands your laptop, computer or phone with six ports. You connect your laptop to the hub via a 20 cm long USB-C cable. You immediately have a connection for a monitor, three USB devices and an RJ-45 connector for a Gigabit Ethernet network. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will provide you with a simple and compact 6in1 docking station for modern laptops. The USB hub offers three USB 5Gbps outputs, two with standard USB-A and a third with USB-C data connector. Transfer rate is up to 5Gb/s thanks to USB 3.2 Gen 1 interface. The hub can permanently connect several external drives simultaneously and also allows charging of phones and tablets with up to 1.5A/5V current. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Another USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD or 1080p/240Hz Full HD and the transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts without limitations. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. The compact aluminum body not only looks great, but also provides mechanical durability and passive cooling. The glossy upper part with a decent backlit logo underlines the premium look of the hub. USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. For the hub to function properly, your laptop's USB-C port must support video output (DisplayPort Alternate Mode or Thunderbolt 3, 4 and above) and Power Delivery powered. The hub can easily connect to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (computer, tablet or phone connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C male connector. Compatible with USB 10Gbps, USB4, Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W, USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (tablet, phone) and the wall charger. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 5Gbps port, USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports. Video output: 1x HDMI port, HDMI A female connector. Maximum supported resolution: 1 monitor - up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD. Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz. To achieve maximum resolution and frequency values on video outputs, the hub must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 3. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.2 (High-bandwidth Digital Content Protection). 2-channel LPCM audio, compressed audio (AC-3, DTC) and HBR audio format support. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T. specifications. 10/100/1000 Mb/s auto-detection. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus (USB bus power). Power supply via PD charger (not included). High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 13 x 110 x 35 mm (H x W x D). Weight 58 g (incl. cable). USB-C cable 20 cm long for connecting the hub to a laptop. Supported operating systems: Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 20 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box with a hanging hole.
The multi-port USB-C 5Gbps AXAGON HMC-H3A STARTER 4in1 hub expands your laptop, computer or phone with four ports. Connect your laptop to the hub via a 15 cm long USB-C cable. You immediately have connectors to connect a monitor and three USB devices at the same time. The USB hub offers three USB outputs, two with USB-A 480Mbps and the third with USB-A 5Gbps. Transfer rate is up to 5Gb/s thanks to USB 3.2 Gen 1 interface. The hub can also handle permanent connection of several external drives simultaneously. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/30Hz Ultra HD, 2K/60Hz Quad HD or 1080p/120Hz Full HD and the transmission of multi-channel audio. The compact and slim aluminium body not only looks great, but also provides mechanical durability and passive cooling. You will also be pleased with the finely textured surface, which does not leave fingerprints. USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. For the hub to function properly, your laptop's USB-C port must support video output (DisplayPort Alternate Mode or Thunderbolt 3, 4 and above). The hub can easily connect to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (computer, tablet or phone connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C male connector. Compatible with USB 10Gbps, USB4, Thunderbolt 3/4. USB outputs: 2x USB 480Mbps port, USB-A female connector. 1x USB 5Gbps port, USB-A female connector. USB-C hub can handle the connection of several external drives at the same time. Video outputs: 1x HDMI port, HDMI A female connector. Maximum supported resolution: 1 monitor - up to 4K/30Hz Ultra HD, 2K/60Hz Quad HD, 1080p/120Hz Full HD. Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. A suitable updated OS and up-to-date graphics drivers are also required. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Up to 8-channel LPCM audio, compressed audio (AC-3, DTC) and HBR audio format support. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus (USB bus power). The blue LED indicates with constant light the hub connection to the computer. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 11 x 95 x 26 mm (H x W x D). Weight 34 g (incl. cable). USB-C cable 15 cm long for connecting the hub to a laptop. Supported operating systems: Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 15 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box with a hanging hole.
WL30-750BL18 Neomounts heavy duty tv wall mount Neomounts WL30-750BL18 fixed wall mount for 43-98" screens - Black The Neomounts WL30-750BL18 LEVEL is the ultimate solution for securely mounting an interactive or heavy weight display up to 98? with a maximum capacity of 125 kg. This heavy-duty wall mount features a high profile wall plate and is engineered for stability and precision, ensuring your screen is securely mounted even on uneven surfaces. The wall mount is designed to provide the sturdiest and most stable touch screen experience. The brackets of the WL30-750BL18 feature depth adjustable wall supports on the lower brackets for better weight distribution and maximum stability. The mount features individual adjustable brackets (10 mm) for securely adjusting the display height or levelling it. The LEVEL-750 wall mount has a profile depth of 4,2 cm and is suitable for screens that meet VESA hole pattern 100x100 to 800x600 mm. Its quickly connectable wall plate allows for multiple screen mounting, while a clever kickstand service position provides easy access to cables and connectors. Additionally, the wall plate is designed with specific cut-outs for wall sockets and securing devices and cables. It features various perforated holes for easy tie-wrap cable fixing and provides space for cable storage, ensuring a clean and tidy finishing. The WL30-750BL18 includes an safe and practical pull & release system, allowing you to quickly attach and detach the display in a safe and secure manner. It is possible to lock the brackets using a padlock (not included) for extra screen security. For simple and effective storage, an optionally available AV-rack can be installed to the left or right side of the mount.
The NewStar desk mount FPMA-D935D4 allows you to attach 4 LCD/TFT screens up to 26" on a desk. With this mount you can easily swivel, tilt and rotate the monitor. It has 3 pivots. The height adjustment of 70 cm can be changed manually. The desk mount can hold screens up to 12 kg and is attached on a desk by a clamp. The arm lenght is 50 cm. This model is suited for all LCD/TFT screens with a VESA 75x75 or 100x100 mm hole pattern. If the hole pattern on the back of your screen is different, please contact us for the opportunities. By using an ergonomic monitorarm you prevent neck- and back complaints. Ideal for use in offices, control rooms and on counters or receptions.
Max. weight 12 kg|Screen size range 10-24"|75 mm x 75 mm|100 mm x 100 mm|Colour Black Max. weight 12 kg Screen size range 10-24" 75 mm x 75 mm Yes 100 mm x 100 mm Yes Colour Black Shipping box quantity 2 Unit Brutto Volume 0,04073 cubm Unit Net Weight 6 kg Unit Gross Weight 7,5 kg
Screen size (min): 37 Screen size (max): 70 Load (max): 45 Range (min): 70 Range (max): 460 Accessories included: - A set of screws to the wall and screw the TV- Polish installation instructions Other features: - Minimum / Maximum spacing horizontally: 75/600 mm-minimum / Maximum vertical spacing: 75/400 mm- Rotation: 120 °- Adjust the degree of inclination: -10 ° ~ + 20 °- Surface finish: powder painting
