Telerite lisaseadmed

Originaal regulaator; Patareid tuleb osta eraldi; Nutikas kaugjuhtimispult

TV-laud Halmar Eva, must

Seinakinnitus teleritele suurusega 43–90 tolli (109–229 cm), maksimaalne kandevõime 80 kg, pikendatav kuni 104,5 cm, täielikult paindlik: pööratav ja kallutatavRaskekaalu meister tõsisteks väljakutseteks: loodud kuni 80 kg kandevõimega, tõstab see seinakinnitus vaevata rasked telerid ja monitorid. Täieliku paindlikkuse ja turvalise paigaldusega saab kinnitust hõlpsalt reguleerida, tagades parima vaatenurga igal ajal ja igast toa nurgast.Maksimaalselt paindlik telerihoidik optimeeritud vaatamisnurgaga: +5°/-15° kallutatav (üles/alla), +60°/-60° pööratav (vasakule/paremale), pikendatav kuni 104,5 cm.Kinnituse pikendamisega kuni 104,5 cm on teler nähtav isegi keerulistest nurkadest, näiteks kõrvalolevast toast.Kiirkinnituse funktsioon võimaldab teleri kiiresti ja lihtsalt kinnituse küljest eemaldada.Lõpmatult reguleeritav topeltkäärmehhanism tagab stabiilse juhitavuse ja usaldusväärse kinnituse.Integreeritud kaablite haldussüsteem kaitseb ühenduskaableid ja tagab puhta ilme ilma kaablipuntrata.Seinakinnitus sobib enamike kumerate ja lameekraaniga teleritega tuntud brändidelt, nagu Samsung (QLED ja LED), Sony, Philips ja LG, ning eri suurustele, näiteks 50", 55", 58", 65", 75", 85".Ühildub VESA® standarditega: 200x200 mm, 300x200 mm, 400x200 mm, 300x300 mm, 400x300 mm, 400x400 mm, 600x400 mm, 800x400 mm.

Teleri Seinakinnitus Basic FULLMOTION (L)Sobib teleritele: 37–80 tolli (94–203 cm)Täielik liikumisvabadus uueks vaatamiskogemuseks – see paindlik seinakinnitus kohandub kõigi vaatamisharjumustega ja pakub ideaalse vaatenurga igas ruumi osas. Tänu dünaamilisele käärtüüpi varrele ja sujuvatele liigenditele saab kinnitusasendit hõlpsalt ja vaevata reguleerida – olgu selleks kallutamine, pööramine või ettepoole tõmbamine: see universaalne lahendus saab hakkama igas olukorras.TooteomadusedMaksimaalselt paindlik telerikinnitus optimeeritud vaatenurgaga: kallutatav +2°/-16° (üles/alla), pööratav +60°/-60° (vasakule/paremale), ulatub kuni 34,8 cmDiskreetne disain: minimaalne kaugus seinast vaid 6,1 cm, teler ei ulatu nähtavalt ruumiAstmeteta reguleeritav topelt-käärligend tagab stabiilse ja sujuva liikumise ning kindla hoidvuseLihtne paigaldus:Kinnita kinnitusliistud teleri tahaAseta teler koos liistudega seinakinnitusele – valikus kõrguspositsioon 1 või 2Takjakinnitusega kaabliklambrid aitavad juhtmed korralikult käärligendite külge kinnitada – puhtam ja korrapärasem välimusÜhildub enamiku kaarjate ja lameekraanidega teleritega, sealhulgas tuntud kaubamärgid nagu Samsung (QLED, LED), Sony, Philips, LG jptSobib populaarsetele ekraanisuurustele: 50", 55", 58", 65", 75"Ühilduvus – VESA® standardid100×100 mm, 100×150 mm, 150×100 mm, 100×200 mm, 200×100 mm, 150×150 mm, 200×200 mm, 300×200 mm, 400×200 mm, 300×300 mm, 400×300 mm, 600×200 mm, 400×400 mm, 600×300 mm, 600×400 mmToimivusKinnituse tüüp: Täisliikuv teleri seinakinnitusEkraani suurus: L (94–203 cm / 37–80")Maksimaalne kandevõime: 40 kgMinimaalne kaugus seinast: 61 mmMaksimaalne kaugus seinast: 348 mmPöördenurk: +60° ~ -60°Kallutusvahemik: +2° ~ -16°Pöörlev kalle (rotatsioon): +3° ~ -3°Maksimaalne paigaldusava (VESA)Toetatud VESA (FDMI) standardid:100 × 100 mm100 × 150 mm150 × 100 mm100 × 200 mm200 × 100 mm150 × 150 mm200 × 200 mm200 × 300 mm300 × 200 mm200 × 400 mm300 × 300 mm300 × 400 mm400 × 200 mm400 × 300 mm400 × 400 mm600 × 200 mm600 × 300 mm600 × 400 mmÜldine teaveVärv: mustMaterjal: teras (pulbervärvitud)Pakendi tüüp: jaemüügi karp (Retail Box)Mõõtmed / KaalLaius: 655 mmKõrgus: 420 mmSügavus: 61 mmKaal: 3660 g

NB! Ühildub ainult uue Elisa Elamuse digiboksiga. Taustavalgustusega pult, mida on mugav kasutada ka hämaras. Tänu Bluetooth ühendusele juhib pult digiboksi ka siis, kui boks on sahtlis või teleri taga peidus. Vali meelepärane esipaneel!

Product kirjeldus: Ergotron LX Desk Monitor Arm - mounting kit - for LCD display Product Type: Mounting kit - desktop Mounting Components: Articulating arm, desk clamp mount, grommet-mount base, 7" post, extension part Tilt: 75° Pan: 360° Lift: 33 cm Rotation: 360° Adjustments: Height, pan, tilt, rotation kaal: 3.6 kg Recommended Use: LCD display Recommended Display Size: Kuni 34" VESA kinnitusing liides: 100 x 100 mm, 75 x 75 mm Max Load kaal: 11.3 kg Material: Aluminium värv: matt must Manufacturer Warranty: 10-aastane garantii

Seinakinnitus teleritele suurusega 37–80 tolli (94–203 cm), maksimaalne kandevõime 45 kg, täielikult paindlik: pööratav ja kallutatavTäielik liikumisvabadus uute vaatenurkade jaoks: paindlik seinakinnitus kohandub kõigi vaatamisharjumustega ja pakub igas toanurgas ideaalset asendit. Dünaamilise käärmehhanismi ja sujuvate liigenditega saab kinnitus hõlpsalt reguleerida, olgu selleks kallutamine, pööramine või väljapoole tõmbamine – see mitmekülgne lahendus saab hakkama iga väljakutsega.Maksimaalselt paindlik telerikinnitus, mis tagab optimaalse vaatenurga: +3°/-12° kallutatav (üles/alla), +60°/-60° pööratav (vasakule/paremale), pikendatav kuni 47,5 cm.Tark kaablite haldussüsteem koos läbimõeldud katetega käärmehhanismil kaitseb ühenduskaableid ja tagab puhta ilme ilma kaablipuntrata.Diskreetne ja ruumisäästlik disain: minimaalne kaugus seinast vaid 5,5 cm, et teler ei ulatuks liiga palju ruumi sisse.Lõpmatult reguleeritav topeltkäärmehhanism tagab stabiilse liikumise ja kindla fikseerimise.Sobib enamikele kumeratele ja lameekraaniga teleritele populaarsetelt kaubamärkidelt nagu Samsung (QLED ja LED), Sony, Philips ja LG, ning suurustele 50", 55", 58", 65", 75".Ühildub VESA® standarditega: 200x200 mm, 200x300 mm, 300x200 mm, 200x400 mm, 400x200 mm, 300x300 mm, 300x400 mm, 400x300 mm, 600x200 mm, 400x400 mm, 600x300 mm, 600x400 mm.

Patch paneel 48 pesa Rj-45 kat.6 Utp Pp-48/rj/6c

Android TV operatsioonisüsteem; 4K Ultra HD eraldusvõime; Google Play rakenduste valik; Eraldi kaugjuhtimispult; Sisseehitatud Chromecast ja WiFi

Screen size (min): 60 Screen size (max): 100 Load (max): 100

FL50-525BL1 Neomounts by Newstar floor stand Neomounts by Newstar FL50-525BL1 mobile floor stand for 55-86" screens - Black The Neomounts by Newstar FL50-525BL1 Move Go is a mobile floor stand for flat screens up to 86" with a maximum weight capacity of 76 kg. Due to the sturdy design and the included touch screen stabilizers, the Move Go is a perfect solution for touch screens. The floor stand is manually adjustable in 4 preset height positions, ranging from 106 to 136 cm. The Neomounts Move Go is packed partially pre-assembled and installation can be done within just minutes. The trolley features practical handles and four solid 7,5 cm double locking caster wheels that allow you to move and use the floor stand wherever you like. Due to the large caster wheels, thresholds or carpets are no challenge to the FL50-525BL1. A multimedia shelf (front and back mountable) with a maximum weight capacity of 10 kg and an AV hardware rack is included and optional for installation. The screen on the trolley can be secured by locking the brackets using a padlock (not included).

The multi-port USB-C 5Gbps AXAGON HMC-8HLSA hub 9in1 expands your laptop, computer or phone with nine ports. You can easily and quickly connect a monitor, three USB devices, Gigabit Ethernet network, headphones with microphone and an SD card reader to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will thus provide you with a simple and compact 9-in-1 docking station not only for Windows laptops but also for Apple laptops such as MacBook Air or MacBook Pro. The USB hub offers three USB outputs with standard USB-A connectors. Two of them with 5Gbps speed and one with 480Mbps speed for mouse or keyboard connection. The hub can also handle the permanent connection of multiple external drives at the same time. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The USB-C connector is reserved only for charging of phone or laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This will also free up one USB-C port on your laptop. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colours and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port, Thunderbolt 4 and above. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The audio output is connected to a 3.5 mm jack and allows the connection of stereo headphones with a microphone. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, monitor TV or projector to the phone. Input (laptop connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 - 100W (only for charging), USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 480Mbps port, USB-A female connector. USB-C hub can handle connecting multiple external drives at the same time. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 60Hz. 2K / WQHD resolution 2560 x 1440 at up to 120Hz. FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10 bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP, FTP, STP or SFTP patch cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Wake-on-LAN support. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. UHS-I support. Speed up to 104 MB/s. Support hardware ECC function and CRC function. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. Audio output / input: 1x 3.5 mm jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. The blue LED indicates with constant light the hub connection to the computer. The high-quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions 118 x 46 x 15 mm. Weight 88 g. USB-C male cable length 20 cm. Supported operating systems: Microsoft Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.

FL50-525WH1 Neomounts by Newstar floor stand Neomounts by Newstar FL50-525WH1 mobile floor stand for 55-86" screens - White The Neomounts by Newstar FL50-525WH1 Move Go is a mobile floor stand for flat screens up to 86" with a maximum weight capacity of 76 kg. Due to the sturdy design and the included touch screen stabilizers, the Move Go is a perfect solution for touch screens. The floor stand is manually adjustable in 4 preset height positions, ranging from 106 to 136 cm. The Neomounts Move Go is packed partially pre-assembled and installation can be done within just minutes. The trolley features practical handles and four solid 7,5 cm double locking caster wheels that allow you to move and use the floor stand wherever you like. Due to the large caster wheels, thresholds or carpets are no challenge to the FL50-525WH1. A multimedia shelf (front and back mountable) with a maximum weight capacity of 10 kg and an AV hardware rack is included and optional for installation. The screen on the trolley can be secured by locking the brackets using a padlock (not included).

FL50-575BL1 Neomounts floor stand Neomounts FL50-575BL1 mobile floor stand for 65-110" screens - Black Meet the Neomounts FL50-575BL1 MOVE Go XL; the ultimate mobile solution for large screen displays up to 110" with a maximum weight capacity of 125 kg. This heavy-duty trolley is not just robust and reliable, but also quick and easy to assemble. Designed with a sturdy structure, the MOVE Go XL offers the perfect solution for large and ultra-wide 105" (touch) screens. The floor stand offers manual height adjustment in 2 preset positions, ranging from 129 to 139 cm, ensuring optimal viewing heights. For extra security, the screen can be fixed in place by locking the brackets using a padlock (not included). Additionally, a multimedia shelf (front and back mountable) and lockable, ventilated hardware compartment with cable opening are included and optional for installation. The MOVE Go XL is all about mobility. With its practical handles and four solid 100 mm double locking caster wheels, it moves effortlessly wherever you need it. Thanks to the large caster wheels, thresholds or carpets are no challenge for the FL50-575BL1. The low depth profile ensures easy doorway passage. Assembly is very easy, as the MOVE Go XL comes partially pre-assembled and includes a bolt box with a range of VESA fixings (ranging from 100x100 to 1100x600 mm). Thanks to the provided cardboard installation support, setup can be completed quickly by a single person in just minutes. Various accessories are available for the MOVE Go XL trolleys, such as a VESA 800 extension kit, a universal videobar kit and practical caster brake lock.

WL35-750BL18 Neomounts heavy duty tv wall mount Neomounts WL35-750BL18 tiltable wall mount for 43-98" screens - Black The Neomounts WL35-750BL18 LEVEL is the ultimate tiltable solution for securely mounting an interactive or heavy weight display up to 98" with a maximum capacity of 125 kg. The toolless tilt adjustment (+15°/-15°) allows you to create the optimum viewing angle. This heavy-duty wall mount features a sturdy high profile wall plate and is engineered for stability and precision, ensuring your screen is securely mounted even on uneven surfaces. The mount features individual adjustable brackets (10 mm) for securely adjusting the display height or levelling it. The LEVEL-750 wall mount has a profile of 9,3 cm and is suitable for screens that meet VESA hole pattern 100x100 to 800x600 mm. Its quickly connectable wall plate allows for multiple screen mounting. Additionally, the wall plate is designed with specific cut-outs for wall sockets and securing devices and cables. It features various perforated holes for easy tie-wrap cable fixing and provides space for cable storage, ensuring a clean and tidy finishing. The WL35-750BL18 includes a safe and practical pull & release system, allowing you to quickly attach and detach the display in a safe and secure manner. The tilt-lock prevents the display from tilting upwards when attaching it on or detaching it from the mount to enable a safe install. It is possible to lock the bracket using a padlock (not included) for extra screen security. For a simple and effective storage, an optionally available, AV-rack can be installed to the left or right side of the mount.

Logilink BP0043 Dual Monitor Desk mount, 13"-32",gas spring, aluminum

WL30-750BL14 Neomounts heavy duty tv wall mount Neomounts WL30-750BL14 fixed wall mount for 32-75" screens - Black The Neomounts WL30-750BL14 LEVEL is the ultimate solution for securely mounting an interactive or heavy weight display up to 75" with a maximum capacity of 100 kg. This heavy-duty wall mount features a high profile wall plate and is engineered for stability and precision, ensuring your screen is securely mounted even on uneven surfaces. The wall mount is designed to provide the sturdiest and most stable touch screen experience. The brackets of the WL30-750BL14 feature depth adjustable wall supports on the lower brackets for better weight distribution and maximum stability. The mount features individual adjustable brackets (10 mm) for securely adjusting the display height or levelling it. The LEVEL-750 wall mount has a profile depth of 4,2 cm and is suitable for screens that meet VESA hole pattern 100x100 to 400x400 mm. Its quickly connectable wall plate allows for multiple screen mounting, while a clever kickstand service position provides easy access to cables and connectors. Additionally, the wall plate is designed with specific cut-outs for wall sockets and securing devices and cables. It features various perforated holes for easy tie-wrap cable fixing and provides space for cable storage, ensuring a clean and tidy finishing. The WL30-750BL14 includes an safe and practical pull & release system, allowing you to quickly attach and detach the display in a safe and secure manner. It is possible to lock the brackets using a padlock (not included) for extra screen security. For simple and effective storage, an optionally available AV-rack can be installed to the left or right side of the mount.

TV SET ACC WALL MOUNT Black/60-100" LFD-W1000 NEWSTAR

Product kirjeldus: RaidSonic ICY BOX IB-MS314-T - mounting kit - for 2 monitors (adjustable dual arms) Product Type: Mounting kit (adjustable dual arms) - desk-mountable mõõtmed (WxDxH): 54.7 cm x 110 cm x 45 cm Adjustable kõrgus: 19.5-45 cm Adjustments: Height, tilt, rotation kaal: 4.8 kg Recommended Use: 2 monitors Recommended Display Size: Kuni 32" VESA kinnitusing liides: 100 x 100 mm, 75 x 75 mm Max Load kaal: 16 kg Material: plastik, steel, aluminium alloy värv: must Package Content: Mounting hardware, allen wrench

Multiport USB-C 3.2 Gen 1 hub AXAGON HMC-HCR3A expands your laptop, computer or phone with four ports and SD / microSD card reader. Through the double-sided USB-C connector, you can easily and quickly connect three USB devices, memory cards and an HDMI display to the computer at the same time. The USB-C hub will provide you with a simple and compact 5in1 docking station for notebook. The USB hub offers three USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. Popular gaming resolution WQHD 2560 x 1440px at 60Hz or FullHD 1920 x 1080px at 60, 100 and 120Hz max. are also supported. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Card reader supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. High data transfer speed ensured by USB 3.2 Gen 1 interface. The card reader enables simultaneous handling of cards in both slots and direct copying between them. Elegant aluminum body ensures mechanical resistance and quality cooling. The finely structured surface with no fingerprint remains will also please you. Port replicator is an ideal accessory for laptops without USB-A connectors, card reader and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. You can connect a flash drive, keyboard, mouse, monitor, TV or projector to your phone. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Compatible with Thunderbolt 3. Connecting USB type C male connector on a fixed 20 cm long cable. USB outputs: 3x SuperSpeed USB port, USB-A female connector. Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit/s). USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A in each of the hub's USB ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port). HDMI output: HDMI. HDMI A (F) female connector. Maximum supported resolution 4K / 4096 x 2160 at 30 Hz. WQHD resolution 2560 x 1440 at 60 Hz max. FullHD resolution 1920 x 1080 at 60, 100, 120 Hz max. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Correct OS is also necessary. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Support up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio formats. Support sampling rate up to 192kHz and up to 24-bit audio depends on source and end device, i.e. laptop/phone and TV/monitor/ AV receiver. The card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash, SD slot: Digital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB), MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus (USB bus power). Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. White LED indicates the connection to the computer's USB port. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions 110 x 35 x 12.5 mm. Weight 58 g (incl. cable). USB cable length 20 cm. Supported operating systems: Microsoft Windows 10, 11, Mac OS, Linux, Android and Chrome OS. Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Package contains: USB-C hub with fixed 20 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.

FL45S-825BL1 Neomounts floor stand. The Neomounts FL45S-825BL1 MOVE Up is a floor stand for flat screens up to 75" with a maximum weight capacity of 70 kg. The screen can be secured by locking the brackets using a padlock (not included). The floor stand is manually adjustable in height (104-157 cm), as well as the bracket head. A lockable, ventilated hardware compartment with cable opening is included and optional for installation (both portrait and landscape). The MOVE Up floor stand features a clever internal cable management system with various in and out outlets for flexible use (above, in the middle where the media player is placed and at the bottom) and conceals and routes cables from floor stand to screen. The FL45S-825BL1 has a solid steel floor plate equipped with fixing holes to optionally bolt the stand to the floor for additional safety. The floor plate has 2 handles for safer relocating. The AFLS-825BL1 and AV1-825BL videobar & multimedia kits are optionally available and enable the installation of a separate cam shelf and multimedia device shelf to the trolley. Included to the kits are an adapter for respectively the Logitech Rally Bar (Mini) or Bose Professional VB-S/VB1. Also compatible is the universal AV2-500BL (VESA mounted) videobar kit.

CL25-530BL1 Neomounts by Newstar projector ceiling mount Neomounts by Newstar CL25-530BL1 universal projector ceiling mount - Black

NS-M4000BLACK NewStar flat screen floor stand Newstar Mobile Monitor/TV Floor Stand for 60-105" screen, Height Adjustable - Black The NewStar floor stand, model NS-M4000BLACK is a mobile floor stand for flat screens up to 105" (267 cm). This mobile stand is a great choice for space saving placement or when wall-, ceiling mounting or desk placement is not an option. This cart stretches your investment by serving a variety of projection needs by sharing a large display over multiple rooms. Get optimal positioning for both standing and seated audiences, in any application, in any part of your location. The mount is manually height adjustable. NewStars' floor stand, NS-M4000BLACK holds your TV, AV equipment and even hides your cables. The casters allow the stand to move it to where you need it. Easily roll this cart through doorways and over thresholds. The floor stand also comes with four leveling feet. NewStar NS-M4000BLACK is suitable for screens up to 105" (267 cm). The weight capacity of this product is 150 kg each screen. The stand is suitable for screens that meet VESA hole pattern 200x200 to 1000x600mm. Min. screen size: 60 inch Max. screen size: 105 inch VESA minimum: 200x200 mm VESA maximum: 1000x600 mm Functionality Width: 120 cm Depth: 68 cm Height: 138 - 153 cm Height adjustment: Manual

Multiport USB-C 5Gbps TRIPLE 4K DISPLAY hub AXAGON HMC-4KX3 expands your laptop with nine ports and memory card reader SD / microSD. You can easily and quickly connect up to three monitors, three USB devices, a Gigabit Ethernet network, headphones and card reader to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a universal and powerful 11in1 docking station for modern laptops. The USB hub offers three USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The USB-C connector is reserved only for powering and simultaneous charging of laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one USB-C port. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger. Each of the three video outputs (2x HDMI + 1x DisplayPort) provides a high-quality image up to 4K/60Hz Ultra HD resolution. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Even when three monitors are connected at the same time, the docking station can provide a resolution of up to 4K/30Hz on each of them. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3/4 port is necessary for the proper function of video output. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. Gigabit network card extends your computer by a fast network connection, adds the missing RJ-45 network connector or another network card. Card reader supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. High data transfer speed ensured by USB 3.2 Gen 1 interface. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The robust aluminum body ensures mechanical resistance and quality cooling of the docking station. The wedge shape of the hub encourages its use as a laptop pad for better cooling and ergonomic positioning. Also, the included USB-C cable is designed to use the hub as a laptop pad, the optimal length of 40 cm together with the curved connector allows it to be almost entirely hidden under the laptop and contribute to the impression of a clean desk. The USB-C cable is detachable and can be replaced with a longer cable if needed. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. Input: USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Compatible with Thunderbolt 3/4. Connection via reversible USB type C female connector. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 480Mbps port, USB-A female connector. 1x Power Delivery port (power only), USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports. Video outputs: 2x HDMI port, HDMI A female connector. 1x DP port, DisplayPort female connector. Video resolution:1 connected monitor in any of the video ports: 4K resolution 4096 x 2160 at up to 60Hz. * 2K / WQHD resolution 2560 x 1440 at up to144Hz (Mac via DP up to 165Hz). * FHD resolution 1920 x 1080 at up to 240Hz (Mac max. 144Hz). *2 simultaneously connected monitors - up to 4K/60Hz on one monitor and 4K/30Hz on the other monitor. *3 simultaneously connected monitors - up to 4K/30Hz on all monitors. ** Valid for connection to a computer with DisplayPort version 1.4. Display mode support in Windows: Mirroring or expanding the surface of the primary monitor on each of up to three connected monitors. Each of the connected monitors can display either the mirrored or extended surface of the primary monitor as needed, e.g. one monitor will display the mirrored surface of the primary monitor and the other two monitors will display two different extended surfaces. Display mode support in MacOS: Mirroring the surface of the primary monitor on all up to three connected monitors. Expansion of the primary monitor area on one of the connected monitors + mirroring of the primary monitor area on up to two other connected monitors. Expanding the area of the primary monitor on one of the connected monitors + mirroring the extended area of the first monitor on up to two other connected monitors. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. A suitable OS is also required. The video output function will not be available without these requirements. HDR (High dynamic range, 10-bit support) support - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Support for 2-channel audio sampling rate up to 48kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN function in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, ECMA-393 proxZzzy for sleeping hosts, RealWoW! and also Link Change Wake-up. Advanced Power Management features: The adapter supports advanced power management and supports advanced power saving e.g. when the Ethernet cable disconnection. Supported Power Management technologies are e.g. Advanced Configuration Power management Interface (ACPI), Link Power Management (LPM) or IEEE 802.3az EEE (Energy Efficient Ethernet) and others.Two LEDs to indicate network activity and connection of the adapter to USB and network. Audio output / input: 1x 3.5 mm jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel aalog mono microphone input 48 kHz @ 16 bit for recording. The card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash. SD slot: Digital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB), MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 100W - 20V/5A. Required PD support from the device (laptop, phone) and a suitable PD wall charger. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminum body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 256 x 90 x 23 mm. Weight 317 g (without cable). USB-C male / male cable length 40 cm. Supported operating systems: Microsoft Windows 10 / 11, Mac OS, Linux, Android and Chrome OS. Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer.

Digitus põrandakinnitus ratastel DA-90447, 37-70 ", Trolleys & Stands, Max 50 kg, must

Neomounts by Newstar tv wall mount Fixed wall mount for 43-86" screens - Black The Neomounts by Newstar WL30-550BL18 is a fixed wall mount for flat screens up to 86" with a maximum weight capacity of 70 kg. The WL30-550BL18 is ultra-flat with a depth of 2,3 cm and is suitable for screens that meet VESA hole pattern 100x100 to 800x400mm. The mount features a nifty magnetic pull & release system, that allows you to attach the TV in a wink of an eye and secure the TV in safe and solid manner. Afterwards, the pull & release straps can be easily hidden behind the screen by clicking the magnet to the mount. The integrated spirit level assures easy installation of the mount.

LED/LCD/PLASMA seinakinnitus kuni 55", max kaaluga 30kg. 3-suunaline.

Tootja: DIGITUS Tootegrupp: televisiooni tarvikud (brackets, stands, shelves) Television tarviku tüüp: TV lift Compatible TVs (diagonal screen): 94-178 cm maksimaalne load: 50 kg kirjeldus: With lower shelf for DVD mängijas või Laptops, värv: must laius: 910 mm kõrgus: 2180 mm sügavus: 680 mm Netokaal: 21.9 kg

ICY BOX IB-MS313-T Monitor stand with desk mounted base for a screen size up to 32"

TV SET ACC WALL MOUNT/WL30-550BL14 NEOMOUNTS

TV SET ACC WALL MOUNT/WL35-550BL14 NEOMOUNTS

TV SET ACC WALL MOUNT/WL40-550BL16 NEOMOUNTS

TV SET ACC WALL MOUNT/WL40S-850BL18 NEOMOUNTS

Adjustable desk mount with monitor arm and notebook tray Position your screen perfectly to reduce neck and eye strain Increase your productivity by taking advantage of dual screen setup Max. weight 9 kg Fits screens sized 17" - 32", 75 mm x 75 mm 100 mm x 100 mm, Colour Black

TV wall mount (tilt), 23”-42” Position your screen perfectly Lightweight and maneuverable design Max. weight 30 kg Fits screens sized 23" - 42", Distance to wall 5.3 cm 75 mm x 75 mm, 100 mm x 100 mm 200 mm x 100 mm, 200 mm x 200 mm Colour Black

The Neomounts by Newstar FL55-875WH1 is a mobile floor stand for displays up to 100" with a maximum weight capacity of 110 kg. The trolley has 65 cm motorized height adjustment (35 mm/second), is operated with a wired remote control and features an anti-collision system for extra safety. A lockable, ventilated hardware compartment with cable opening is included and optional for installation. The trolley features practical handles and four solid 10 cm double locking caster wheels that allow you to move and use the floor stand wherever you like. Due to the large caster wheels, thresholds or carpets are no challenge to the FL55-875WH1. The open design wheelbase allows easy access to the (touch) display and enables easier movement around objects. The included cable duct, optional to install, conceal and route cables from floor stand to screen. A practical cable management bracket at the back of the trolley ensure easy and safe relocation. Additionally, at the bottom of the trolley a space with tie wrap holes is available to install a power strip. The floor stand is packed partially pre-assembled, to ensure fast and easy installation. The display can be secured by locking the brackets using a padlock (not included). Additionally, the FL55-875WH1 is compactly packed for optimized transportation and storage. The AFL-875WH1 videobar & multimedia kit is optionally available and enables the installation of a separate cam shelf and multimedia device shelf to the trolley. Included to the kit is an adapter for the Logitech Rally Bar (Mini). In addition, the multimedia shelf is suitable for installation of i.a. the Logitech Tap.

FL50-540BL1 Neomounts by Newstar floor stand Neomounts by Newstar mobile floor stand for 37-70" screens - Black

Full motion TV wall mount, 32”-75”, 45 kg Position your screen perfectly Lightweight and maneuverable design

Paper/Pasteboard: 160.00 g WEEE tax: No PET: 16.00 g Gross depth (mm): 170.00 mm Gross height (mm): 150.00 mm Gross weight: 4.44 kg Gross width (mm): 670.00 mm Net weight: 4.00 kg Packing quantity: 1.00 pc(s) Tare weight (kg): 0.44 kg Volume (m3): 0.02 m³ Other features: Features • Creates space on the desktop and provides a more flexible and productive workspace • Well-engineered design slim and ergonomic • Smart Torque Adjust™ built-in spring gauge can be adjusted to suit various monitor weights • Gas spring counterbalance moves the monitor with a light touch • Cable management routes cables under the arm to reduce clutter for a clean look • Grommet and desk mount base suit most desks with adjustable clamp height • Pear-shaped VESA® simplifies the mounting of the monitor • Supports 75x75 und 100x100 VESA® standards

Suitable for standard VESA mounting patterns of 75 x 75 and 100 x 100 mm For monitors up to 69cm (27") and with a maximum weight of 8 kg Individual height adjustment of 15mm for perfect alignment of your monitors Freely adjustable vertical tilt angle of up to 45° Freely swivels up to 90° Can be rotated 360°

LogiLink® ,BP0042, Alumium monitor desk mount, 13–27", max. 9 kg Logilink Desk Mount, BP0042, 13-27 ", Maximum weight (capacity) 9 kg, Silver