Samsungi kohandatav raam on ideaalne viis, kuidas lisada oma Samsung The Frame telerile isikupärane stiil. Lihtsasti paigaldatav alumiiniumist raam võimaldab sul valida oma interjööriga sobiva värvi ja muuta telerit veelgi stiilsemaks ja kodusemaks. • Lihtne paigaldus ja eemaldamine • Stiilne ja kohandatav disain • Sobib Samsung The Frame LS03C mudelitele
Techlink seinakinnitus 26’’-50’’ LCD/LED-teleritele, kandevõime kuni 40 kg. Pööratav 90 kraadi paremale ja vasakule. Kallutatav kuni 12 kraadi, kaugus seinast 10,5 - 54,5 cm.
Google Chromecast Google TV-ga Google TV Chromecast toob Teile meelepärase meelelahutuse, sealhulgas otseülekanded otse koju ja seda kuni 4K HDR kvaliteediga. Saate tellimuste, vaatamisajaloo ja Teile kuuluva sisu põhjal personaalseid soovitusi - ja seda kõike ühest kohast. Otsige meeleolu, žanri, näitleja ja muu järgi enda jaoks sobivat sisu ning Google Voice Remote hääljuhtimispuldi abil saate seda teha häälkäskluste abil. Chromecast töötab peaaegu iga HDMI-porti sisaldava teleriga. Lihtsalt ühendage see vooluvõrku, ühendage WiFi-ga ja alustage voogesitust. Google TV Chromecast-i kasutamiseks on vaja HDMI-pordiga telerit, WiFi-võrku, Google-i kontot ja lähedal asuvat pistikupesa. Sisu vaatamiseks 4K-kvaliteedis on vaja ka 4K-toega telerit ja piisava lairibaga Interneti-ühendust. 700 000+ filmi ja telesarja Kiire voogesitus kuni 4K HDR-s Voice Remote hääljuhtimispult - sirvige sisu häälkäskluste abil Personaalsed soovitused sirvitud sisu ajaloo põhjal
* Värv: Must * Materjal: Metall + 8 mm karastatud klaas * Pööratav: -35° ~ +35° * Kandevõime: 40 kg. * Kõrgus reguleeritav 42 cm kuni 64 cm. (Ülemise kruvipesa kõrgus) * VESA: alates 100x100 kuni 400x400
Valides COMFORT kallutatava TV seinakinnituse, valid stiili, ohutuse ja meeldiva vaatamiskogemuse. See seinakinnitus sobib suurepäraselt juhul, kui sinu TV on seinal natuke kõrgemal, näiteks magamistoas. Saad seda kallutada kuni 20 kraadi, et luua ideaalne vaatenurk. TV seinakinnitus sobib televiisoritele suurusega 19–43 tolli ja kaaluga kuni 15 kg. • Kallutatav mugavaks vaatenurgaks • Turvaline Lukustus Ühe Klõpsuga: ClickLoc™ turvasüsteem • TÜV Sertifikaat: testitud kolmekordselt maksimaalse kandevõime ulatuses
JALG 42" - 55" TV-alus on elegantselt minimalistlik ja funktsionaalne lahendus, mis sobib enamikele teleritele. Käsitööna valmistatud ja jätkusuutlikest materjalidest toodetud alus ühendab endas skandinaavialiku disaini ja praktilisuse, pakkudes samal ajal ruumisäästlikku lahendust, mis aitab peita juhtmed ja seadmed teleri taha. • Sobib enamikule 42" - 55" teleritele • Käsitööna valmistatud jätkusuutlikest materjalidest • Lihtne kokku panna ja paigaldada • Skandinaavialik minimalistlik disain • Ruumisäästlik, peidab juhtmed ja seadmed
FL50-525BL1 Neomounts by Newstar floor stand Neomounts by Newstar FL50-525BL1 mobile floor stand for 55-86" screens - Black The Neomounts by Newstar FL50-525BL1 Move Go is a mobile floor stand for flat screens up to 86" with a maximum weight capacity of 76 kg. Due to the sturdy design and the included touch screen stabilizers, the Move Go is a perfect solution for touch screens. The floor stand is manually adjustable in 4 preset height positions, ranging from 106 to 136 cm. The Neomounts Move Go is packed partially pre-assembled and installation can be done within just minutes. The trolley features practical handles and four solid 7,5 cm double locking caster wheels that allow you to move and use the floor stand wherever you like. Due to the large caster wheels, thresholds or carpets are no challenge to the FL50-525BL1. A multimedia shelf (front and back mountable) with a maximum weight capacity of 10 kg and an AV hardware rack is included and optional for installation. The screen on the trolley can be secured by locking the brackets using a padlock (not included).
The multi-port USB-C 5Gbps AXAGON HMC-8HLSA hub 9in1 expands your laptop, computer or phone with nine ports. You can easily and quickly connect a monitor, three USB devices, Gigabit Ethernet network, headphones with microphone and an SD card reader to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will thus provide you with a simple and compact 9-in-1 docking station not only for Windows laptops but also for Apple laptops such as MacBook Air or MacBook Pro. The USB hub offers three USB outputs with standard USB-A connectors. Two of them with 5Gbps speed and one with 480Mbps speed for mouse or keyboard connection. The hub can also handle the permanent connection of multiple external drives at the same time. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The USB-C connector is reserved only for charging of phone or laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This will also free up one USB-C port on your laptop. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colours and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port, Thunderbolt 4 and above. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The audio output is connected to a 3.5 mm jack and allows the connection of stereo headphones with a microphone. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, monitor TV or projector to the phone. Input (laptop connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 - 100W (only for charging), USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 480Mbps port, USB-A female connector. USB-C hub can handle connecting multiple external drives at the same time. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 60Hz. 2K / WQHD resolution 2560 x 1440 at up to 120Hz. FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10 bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP, FTP, STP or SFTP patch cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Wake-on-LAN support. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. UHS-I support. Speed up to 104 MB/s. Support hardware ECC function and CRC function. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. Audio output / input: 1x 3.5 mm jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. The blue LED indicates with constant light the hub connection to the computer. The high-quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions 118 x 46 x 15 mm. Weight 88 g. USB-C male cable length 20 cm. Supported operating systems: Microsoft Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.
The Neomounts by Newstar FL55-875BL1 is a mobile floor stand for displays up to 100" with a maximum weight capacity of 110 kg. The trolley has 65 cm motorized height adjustment (35 mm/second), is operated with a wired remote control and features an anti-collision system for extra safety. A lockable, ventilated hardware compartment with cable opening is included and optional for installation. The trolley features practical handles and four solid 10 cm double locking caster wheels that allow you to move and use the floor stand wherever you like. Due to the large caster wheels, thresholds or carpets are no challenge to the FL55-875BL1. The open design wheelbase allows easy access to the (touch) display and enables easier movement around objects. The included cable duct, optional to install, conceal and route cables from floor stand to screen. A practical cable management bracket at the back of the trolley ensure easy and safe relocation. Additionally, at the bottom of the trolley a space with tie wrap holes is available to install a power strip. The floor stand is packed partially pre-assembled, to ensure fast and easy installation. The display can be secured by locking the brackets using a padlock (not included). Additionally, the FL55-875BL1 is compactly packed for optimized transportation and storage. The AFL-875BL1 videobar & multimedia kit is optionally available and enables the installation of a separate cam shelf and multimedia device shelf to the trolley. Included to the kit is an adapter for the Logitech Rally Bar (Mini). In addition, the multimedia shelf is suitable for installation of i.a. the Logitech Tap.
Paper/Pasteboard: 160.00 g WEEE tax: No PET: 16.00 g Gross depth (mm): 170.00 mm Gross height (mm): 150.00 mm Gross weight: 4.44 kg Gross width (mm): 670.00 mm Net weight: 4.00 kg Packing quantity: 1.00 pc(s) Tare weight (kg): 0.44 kg Volume (m3): 0.02 m³ Other features: Features • Creates space on the desktop and provides a more flexible and productive workspace • Well-engineered design slim and ergonomic • Smart Torque Adjust™ built-in spring gauge can be adjusted to suit various monitor weights • Gas spring counterbalance moves the monitor with a light touch • Cable management routes cables under the arm to reduce clutter for a clean look • Grommet and desk mount base suit most desks with adjustable clamp height • Pear-shaped VESA® simplifies the mounting of the monitor • Supports 75x75 und 100x100 VESA® standards
FL50-525WH1 Neomounts by Newstar floor stand Neomounts by Newstar FL50-525WH1 mobile floor stand for 55-86" screens - White The Neomounts by Newstar FL50-525WH1 Move Go is a mobile floor stand for flat screens up to 86" with a maximum weight capacity of 76 kg. Due to the sturdy design and the included touch screen stabilizers, the Move Go is a perfect solution for touch screens. The floor stand is manually adjustable in 4 preset height positions, ranging from 106 to 136 cm. The Neomounts Move Go is packed partially pre-assembled and installation can be done within just minutes. The trolley features practical handles and four solid 7,5 cm double locking caster wheels that allow you to move and use the floor stand wherever you like. Due to the large caster wheels, thresholds or carpets are no challenge to the FL50-525WH1. A multimedia shelf (front and back mountable) with a maximum weight capacity of 10 kg and an AV hardware rack is included and optional for installation. The screen on the trolley can be secured by locking the brackets using a padlock (not included).
WL30-750BL14 Neomounts heavy duty tv wall mount Neomounts WL30-750BL14 fixed wall mount for 32-75" screens - Black The Neomounts WL30-750BL14 LEVEL is the ultimate solution for securely mounting an interactive or heavy weight display up to 75" with a maximum capacity of 100 kg. This heavy-duty wall mount features a high profile wall plate and is engineered for stability and precision, ensuring your screen is securely mounted even on uneven surfaces. The wall mount is designed to provide the sturdiest and most stable touch screen experience. The brackets of the WL30-750BL14 feature depth adjustable wall supports on the lower brackets for better weight distribution and maximum stability. The mount features individual adjustable brackets (10 mm) for securely adjusting the display height or levelling it. The LEVEL-750 wall mount has a profile depth of 4,2 cm and is suitable for screens that meet VESA hole pattern 100x100 to 400x400 mm. Its quickly connectable wall plate allows for multiple screen mounting, while a clever kickstand service position provides easy access to cables and connectors. Additionally, the wall plate is designed with specific cut-outs for wall sockets and securing devices and cables. It features various perforated holes for easy tie-wrap cable fixing and provides space for cable storage, ensuring a clean and tidy finishing. The WL30-750BL14 includes an safe and practical pull & release system, allowing you to quickly attach and detach the display in a safe and secure manner. It is possible to lock the brackets using a padlock (not included) for extra screen security. For simple and effective storage, an optionally available AV-rack can be installed to the left or right side of the mount.
