Desktop holder for 2 monitors, The maximum hole under the handle: 100x100, 75x75, Adjust the vertical (slope): -50 to 35 degrees, Adjusting the level (rotation): 360 degrees, Attaching to the table, System to hide wires, Built in gas spring, Pivot function, Built-in 2 fast USB 3.0 ports for easy connection of external devices to your computer., Mounting screw set
MA2030 seinakinnitus on sobilik kasutamiseks 26 kuni 40-tollise teleriga, mille kaal ei ületa 15 kg. Seinakinnitus võimaldab pöörata telerit kummalegi poole kuni 60° ning kallutada kuni 15°, et saavutada parim vaatenurk.
Neomounts by Newstar tv wall mount Fixed wall mount for 43-86" screens - Black The Neomounts by Newstar WL30-550BL18 is a fixed wall mount for flat screens up to 86" with a maximum weight capacity of 70 kg. The WL30-550BL18 is ultra-flat with a depth of 2,3 cm and is suitable for screens that meet VESA hole pattern 100x100 to 800x400mm. The mount features a nifty magnetic pull & release system, that allows you to attach the TV in a wink of an eye and secure the TV in safe and solid manner. Afterwards, the pull & release straps can be easily hidden behind the screen by clicking the magnet to the mount. The integrated spirit level assures easy installation of the mount.
The multi-port USB-C 5Gbps AXAGON HMC-7HX2 DUAL 4K DISPLAY 7in1 hub expands your laptop, computer or phone with seven ports. Connect your laptop to the hub via a 15 cm long USB-C cable. You immediately have a connection for a two 4K monitors, three USB devices and an RJ-45 connector for a Gigabit Ethernet network. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will provide you with a simple and compact 7in1 docking station for modern laptops. The USB hub offers three USB 5Gbps outputs, two with standard USB-A and a third with USB-C data connector. Transfer rate is up to 5Gb/s thanks to USB 3.2 Gen 1 interface. The hub can permanently connect several external drives simultaneously and also allows charging of phones and tablets with up to 1.5A/5V current. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Another USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. Two HDMI outputs allow you to connect external monitors, TVs or projectors with up to 4K/60Hz Ultra HD resolution, even when two monitors are connected at the same time. Other popular resolutions are also supported, such as 2K/120Hz Quad HD or 1080p/240Hz Full HD and multi-channel audio transmission. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts without limitations. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. The compact aluminium body not only looks great, but also provides mechanical durability and passive cooling. USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. For the hub to function properly, your laptop's USB-C port must support video output (DisplayPort Alternate Mode or Thunderbolt 3, 4 and above) and Power Delivery powered. The hub can easily connect to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (computer, tablet or phone connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C male connector. Compatible with USB 10Gbps, USB4, Thunderbolt 3/4/5. Input (power supply): USB Power Delivery 3.0 - 100W port, USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (tablet, phone) and the wall charger. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 5Gbps port, USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports. Video output: 2x HDMI A port, HDMI A female connector. Maximum supported resolution: 1 monitor - up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD. 2 monitors - up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD. Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz. To achieve maximum resolution and frequency values on video outputs, the hub must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 3. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.2 (High-bandwidth Digital Content Protection). 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio format support. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T. specifications. 10/100/1000 Mb/s auto-detection. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus (USB bus power). Power supply via PD charger (not included). High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 13 x 134 x 34 mm (H x W x D). Weight 59 g (incl. cable). USB-C cable 15 cm long for connecting the hub to a laptop. Supported operating systems: Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 15 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box with a hanging hole.
The multi-port USB-C 5Gbps AXAGON HMC-6GLN GLASS 6in1 hub expands your laptop, computer or phone with six ports. You connect your laptop to the hub via a 20 cm long USB-C cable. You immediately have a connection for a monitor, three USB devices and an RJ-45 connector for a Gigabit Ethernet network. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will provide you with a simple and compact 6in1 docking station for modern laptops. The USB hub offers three USB 5Gbps outputs, two with standard USB-A and a third with USB-C data connector. Transfer rate is up to 5Gb/s thanks to USB 3.2 Gen 1 interface. The hub can permanently connect several external drives simultaneously and also allows charging of phones and tablets with up to 1.5A/5V current. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Another USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD or 1080p/240Hz Full HD and the transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts without limitations. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. The compact aluminum body not only looks great, but also provides mechanical durability and passive cooling. The glossy upper part with a decent backlit logo underlines the premium look of the hub. USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. For the hub to function properly, your laptop's USB-C port must support video output (DisplayPort Alternate Mode or Thunderbolt 3, 4 and above) and Power Delivery powered. The hub can easily connect to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (computer, tablet or phone connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C male connector. Compatible with USB 10Gbps, USB4, Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W, USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (tablet, phone) and the wall charger. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 5Gbps port, USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports. Video output: 1x HDMI port, HDMI A female connector. Maximum supported resolution: 1 monitor - up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD. Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz. To achieve maximum resolution and frequency values on video outputs, the hub must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 3. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.2 (High-bandwidth Digital Content Protection). 2-channel LPCM audio, compressed audio (AC-3, DTC) and HBR audio format support. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T. specifications. 10/100/1000 Mb/s auto-detection. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus (USB bus power). Power supply via PD charger (not included). High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 13 x 110 x 35 mm (H x W x D). Weight 58 g (incl. cable). USB-C cable 20 cm long for connecting the hub to a laptop. Supported operating systems: Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 20 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box with a hanging hole.
Max. weight 10 kg|Screen size range 10-27"|75 mm x 75 mm|100 mm x 100 mm|Colour Black Max. weight 10 kg Screen size range 10-27" 75 mm x 75 mm Yes 100 mm x 100 mm Yes Colour Black Shipping box quantity 4 Unit Brutto Volume 0,01935 cubm Unit Net Weight 2,5 kg Unit Gross Weight 3,2 kg
The NewStar VESA adapter, model FPMA-VESA440 allows a VESA mount with 200x200 interface to be used with displays with VESA hole patterns to 400x400mm. Ideal when flat screen needs different VESA pattern to select wall-, desk- or ceiling mount. NewStar FPMA-VESA440 is suitable for screens up to 60" (152 cm). The weight capacity of this product is 35 kg each screen. Depth of this adapter is 3 millimetres only. The adapter is suitable for screens that meet VESA hole pattern 200x200 to 400x400. Different hole patterns can be covered using NewStar VESA adapter plates.
An 8-point tool-less micro adjustment system delivers seamless fingertip alignmentThe withdrawable mechanism provides convenient service access to screens installed in recess and spaces that are difficult to be accessed for service work.The withdrawable mechanism enables locking with a lock screw to prevent accidental screen removal.
LogiLink BP0012 TV Wall Mount 32–55"Toote kirjeldus inglise keeles:Flat construction, extreme solid and secureSuitable for 32–55" LCD, LED, PC and TV monitorsCarrying capacity: Max. 35 kg / 77 lbsMounting type: Tilt -14°/0°VESA compatibility: 200x200, 400x200, 300x300, 400x400Wall clearance: 25 mm
NS-M4000BLACK NewStar flat screen floor stand Newstar Mobile Monitor/TV Floor Stand for 60-105" screen, Height Adjustable - Black The NewStar floor stand, model NS-M4000BLACK is a mobile floor stand for flat screens up to 105" (267 cm). This mobile stand is a great choice for space saving placement or when wall-, ceiling mounting or desk placement is not an option. This cart stretches your investment by serving a variety of projection needs by sharing a large display over multiple rooms. Get optimal positioning for both standing and seated audiences, in any application, in any part of your location. The mount is manually height adjustable. NewStars' floor stand, NS-M4000BLACK holds your TV, AV equipment and even hides your cables. The casters allow the stand to move it to where you need it. Easily roll this cart through doorways and over thresholds. The floor stand also comes with four leveling feet. NewStar NS-M4000BLACK is suitable for screens up to 105" (267 cm). The weight capacity of this product is 150 kg each screen. The stand is suitable for screens that meet VESA hole pattern 200x200 to 1000x600mm. Min. screen size: 60 inch Max. screen size: 105 inch VESA minimum: 200x200 mm VESA maximum: 1000x600 mm Functionality Width: 120 cm Depth: 68 cm Height: 138 - 153 cm Height adjustment: Manual
DS70-750BL2 Neomounts by Newstar monitor desk mount Neomounts by Newstar DS70-750BL2 full motion monitor desk mount for 17-27" screens - Black Max. weight 7 kg Fits screens sized 17-27", 75 mm x 75 mm 100 mm x 100 mm, Colour Black
One Touch Height Adjust Monitor Holder. dual monitor The SmartFit dual arm with one-touch height adjustment makes it easy to achieve perfect dual monitor ergonomics (and a neutral, comfortable posture) thanks to the patented SmartFit system and fully movable design. The rugged construction, tested to ANSI/BIFMA standards, guarantees stability in any position, and the monitor's gas spring mount makes it easy to adjust the height, depth and angle of each monitor from side-by-side to vertical. The product's built-in cable management system organizes and hides cables while the arms lift the dual monitors and keep them out of the way while organizing and clearing valuable desk space. Kensington Durability ensures a more ergonomic workplace for years to come. With SmartFit, finding the right monitor height for maximum comfort is as easy as 1-2-3. Just match your hand size to the color on the chart provided, set the height to your color and you're done. The Kensington SmartFit One-Touch Height Adjustable Dual Arm makes it easy to adjust the height, depth and angle of any external monitor. With 6.7-19.9 (170mm-505mm) height adjustment, +/-90° monitor swivel and swivel, and +/-90° tilt adjustment, the product's fully articulated design gives you total control over the position of two monitors, placing them side by side or aligning them vertically. Its counterweight tension adjustment allows you to tighten or loosen each arm to accommodate the monitor's range of weights with the same ease and stability (hex key included). The Kensington SmartFit Dual Monitor Arm with one-touch height adjustment is stable in any position and supports flat or curved monitors from 13-34 inches and weighing up to 9 kg. One-touch height adjustable Kensington SmartFit dual monitor arm can be mounted via c-clamp (Tabletop thickness range: 0.393.3 or 1085mm) or grommet (Tabletop thickness range: 0.393.1 or 10mm 80mm; Grommet hole diameter range: 0 .41-1.97 or 10.5mm-50mm) tool kit included. Its non-durable, non-marking installation makes it easy to remove. The attached quick-release plate, detachable VESA plate (75mm or 100mm) makes the arm ideal for VESA-mounted monitors. The built-in cable management system in the Kensington SmartFit double arm with one-touch height adjustment keeps cables out of sight and keeps them in the arm itself. The Kensington SmartFit Dual Monitor with one-touch height adjustment is tested to ANSI/BIFMA performance and safety standards. SmartFit system Master the ergonomics of dual monitors - the correct height of two monitors with the SmartFit system. Just match your hand size to the color on the chart provided, set the height to your color and you're done. One-touch adjustable arms with built-in gas spring and counterbalance tension adjustment Enjoy hassle-free height, depth and angle adjustments for any external monitor. With 6.7-19.9 (170mm-505mm) height adjustment, +/-90° monitor swivel and swivel, and +/-90° tilt adjustment, the fully articulated spring-loaded monitor arm The one-touch gas switch gives you total control over the placement of your two monitors, from horizontal to vertical and side by side to vertical. Its counterweight tension adjustment allows you to tighten or loosen each arm to accommodate the monitor's range of weights with the same ease and stability (hex key included). Durable construction focused on stability The Kensington SmartFit Dual Monitor Arm with one-touch height adjustment is stable in any position and supports 13-34 diagonal flat or curved monitors weighing up to 19.8 lbs (9 kg). Easy, universal installation Can be mounted using c-clamp (table top thickness range: 0.393.3 or 1085 mm) or grommet (table top thickness range: 0.93.1 or 10 mm80 mm; diameter range: 0.41) or 10.5 mm-50 mm), the installation is non-permanent and leaves no traces, which facilitates disassembly in the set of tools. The included quick-release detachable VESA plate (75mm or 100mm) makes the fully articulating double arm ideal for VESA-mounted monitors. Cable management system The product's cable management system organizes and hides cables while arms lift dual monitors and keep them out of the way, tidying up and freeing up valuable desk space. Kensington Durability The Kensington SmartFit One Button Height Adjustable Dual Monitor Arm is tested to ANSI/BIFMA standards. Trust the reliable the bones of a durable monitor arm and enjoy stability and easy adjustment for many years.
The multi-port USB-C 5Gbps AXAGON HMC-8HLSA hub 9in1 expands your laptop, computer or phone with nine ports. You can easily and quickly connect a monitor, three USB devices, Gigabit Ethernet network, headphones with microphone and an SD card reader to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will thus provide you with a simple and compact 9-in-1 docking station not only for Windows laptops but also for Apple laptops such as MacBook Air or MacBook Pro. The USB hub offers three USB outputs with standard USB-A connectors. Two of them with 5Gbps speed and one with 480Mbps speed for mouse or keyboard connection. The hub can also handle the permanent connection of multiple external drives at the same time. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The USB-C connector is reserved only for charging of phone or laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This will also free up one USB-C port on your laptop. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colours and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port, Thunderbolt 4 and above. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The audio output is connected to a 3.5 mm jack and allows the connection of stereo headphones with a microphone. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, monitor TV or projector to the phone. Input (laptop connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 - 100W (only for charging), USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 480Mbps port, USB-A female connector. USB-C hub can handle connecting multiple external drives at the same time. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 60Hz. 2K / WQHD resolution 2560 x 1440 at up to 120Hz. FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10 bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP, FTP, STP or SFTP patch cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Wake-on-LAN support. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. UHS-I support. Speed up to 104 MB/s. Support hardware ECC function and CRC function. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. Audio output / input: 1x 3.5 mm jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. The blue LED indicates with constant light the hub connection to the computer. The high-quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions 118 x 46 x 15 mm. Weight 88 g. USB-C male cable length 20 cm. Supported operating systems: Microsoft Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.
Rotating full motion TV wall mount, 40" - 80'' - Position your screen perfectly - Lightweight and maneuverable design - Double arm full-motion TV wall mount with rotation function - Supports most 40” - 80” LCD/LED TV’s - VESA compatible, max. 600 mm x 400 mm - Wall distance 61 - 506 mm - Allows up to 100 degrees swivel and 10 degrees tilting - Max. 90 degrees rotation: allows to position your TV in both portait and landscape mode - Practical cable guides on the arms - Includes all necessary installation materials
FL45S-825BL1 Neomounts floor stand. The Neomounts FL45S-825BL1 MOVE Up is a floor stand for flat screens up to 75" with a maximum weight capacity of 70 kg. The screen can be secured by locking the brackets using a padlock (not included). The floor stand is manually adjustable in height (104-157 cm), as well as the bracket head. A lockable, ventilated hardware compartment with cable opening is included and optional for installation (both portrait and landscape). The MOVE Up floor stand features a clever internal cable management system with various in and out outlets for flexible use (above, in the middle where the media player is placed and at the bottom) and conceals and routes cables from floor stand to screen. The FL45S-825BL1 has a solid steel floor plate equipped with fixing holes to optionally bolt the stand to the floor for additional safety. The floor plate has 2 handles for safer relocating. The AFLS-825BL1 and AV1-825BL videobar & multimedia kits are optionally available and enable the installation of a separate cam shelf and multimedia device shelf to the trolley. Included to the kits are an adapter for respectively the Logitech Rally Bar (Mini) or Bose Professional VB-S/VB1. Also compatible is the universal AV2-500BL (VESA mounted) videobar kit.
WL35-750BL16 Neomounts heavy duty tv wall mount Neomounts WL35-750BL16 tiltable wall mount for 42-86" screens - Black The Neomounts WL35-750BL16 LEVEL is the ultimate tiltable solution for securely mounting an interactive or heavy weight display up to 86" with a maximum capacity of 125 kg. The toolless tilt adjustment (+15°/-15°) allows you to create the optimum viewing angle. This heavy-duty wall mount features a sturdy high profile wall plate and is engineered for stability and precision, ensuring your screen is securely mounted even on uneven surfaces. The mount features individual adjustable brackets (10 mm) for securely adjusting the display height or levelling it. The LEVEL-750 wall mount has a profile of 9,3 cm and is suitable for screens that meet VESA hole pattern 100x100 to 600x400 mm. Its quickly connectable wall plate allows for multiple screen mounting. Additionally, the wall plate is designed with specific cut-outs for wall sockets and securing devices and cables. It features various perforated holes for easy tie-wrap cable fixing and provides space for cable storage, ensuring a clean and tidy finishing. The WL35-750BL16 includes a safe and practical pull & release system, allowing you to quickly attach and detach the display in a safe and secure manner. The tilt-lock prevents the display from tilting upwards when attaching it on or detaching it from the mount to enable a safe install. It is possible to lock the bracket using a padlock (not included) for extra screen security. For a simple and effective storage, an optionally available, AV-rack can be installed to the left or right side of the mount.
The multi-port USB-C 5Gbps AXAGON HMC-5H hub 5in1 expands your laptop, computer or phone with five ports. Via the double-sided USB-C connector, you can quickly and easily connect a monitor and three USB devices to the computer at the same time. You also get the possibility to supply laptop using Power Delivery technology. Thanks to the 1 m long cable, you can conveniently arrange the devices you need for work according to your needs. The port replicator thus fulfils the function of a universal 5in1 docking station for modern laptops. The USB hub offers three 5Gbps USB outputs with standard USB-A connectors. The hub can also handle the permanent connection of multiple external drives at the same time. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub can also charge mobile phones and tablets connected to the hub's USB ports with a current of up to 1.5A/5V. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The USB-C connector is reserved only for charging of phone or laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This will also free up one USB-C port on your laptop. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port, Thunderbolt 4 and above. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (laptop connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W (only for charging), USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 3x USB 5Gbps port, USB-A female connector. USB-C hub can handle connecting multiple external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB ports. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 30Hz. 2K / WQHD resolution 2560 x 1440 at up to 60Hz. FHD resolution 1920 x 1080 at up to 120Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 121 x 35 x 10 mm. Weight 75 g. USB-C male cable length 100 cm. Supported operating systems: Microsoft Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 100 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.
WL30-750BL18 Neomounts heavy duty tv wall mount Neomounts WL30-750BL18 fixed wall mount for 43-98" screens - Black The Neomounts WL30-750BL18 LEVEL is the ultimate solution for securely mounting an interactive or heavy weight display up to 98? with a maximum capacity of 125 kg. This heavy-duty wall mount features a high profile wall plate and is engineered for stability and precision, ensuring your screen is securely mounted even on uneven surfaces. The wall mount is designed to provide the sturdiest and most stable touch screen experience. The brackets of the WL30-750BL18 feature depth adjustable wall supports on the lower brackets for better weight distribution and maximum stability. The mount features individual adjustable brackets (10 mm) for securely adjusting the display height or levelling it. The LEVEL-750 wall mount has a profile depth of 4,2 cm and is suitable for screens that meet VESA hole pattern 100x100 to 800x600 mm. Its quickly connectable wall plate allows for multiple screen mounting, while a clever kickstand service position provides easy access to cables and connectors. Additionally, the wall plate is designed with specific cut-outs for wall sockets and securing devices and cables. It features various perforated holes for easy tie-wrap cable fixing and provides space for cable storage, ensuring a clean and tidy finishing. The WL30-750BL18 includes an safe and practical pull & release system, allowing you to quickly attach and detach the display in a safe and secure manner. It is possible to lock the brackets using a padlock (not included) for extra screen security. For simple and effective storage, an optionally available AV-rack can be installed to the left or right side of the mount.
The NewStar floor stand, model NM-M1700BLACK is a mobile floor stand for flat screens up to 75" (191 cm). This mobile stand is a great choice for space saving placement or when wall-, ceiling mounting or desk placement is not an option. This cart stretches your investment by serving a variety of projection needs by sharing a large display over multiple rooms. Get optimal positioning for both standing and seated audiences, in any application, in any part of your location. The mount is manually height adjustable from 103 to 153 centimetres. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the stand nice and tidy. NewStars' floor stand, NM-M1700BLACK holds your TV, AV equipment and even hides your cables. The casters allow the stand to move it to where you need it. Easily roll this cart through doorways and over thresholds. NewStar NM-M1700BLACK has one pivot point and is suitable for screens up to 75" (191 cm). The weight capacity of this product is 45 kg each screen. The stand is suitable for screens that meet VESA hole pattern 200x200 to 600x400mm. All installation material is included with the product. Min. screen size:32 inch Max. screen size:75 inch Mount:Floor Depth:60 cm Height:103 - 153 cm
Product kirjeldus: RaidSonic ICY BOX IB-MS314-T - mounting kit - for 2 monitors (adjustable dual arms) Product Type: Mounting kit (adjustable dual arms) - desk-mountable mõõtmed (WxDxH): 54.7 cm x 110 cm x 45 cm Adjustable kõrgus: 19.5-45 cm Adjustments: Height, tilt, rotation kaal: 4.8 kg Recommended Use: 2 monitors Recommended Display Size: Kuni 32" VESA kinnitusing liides: 100 x 100 mm, 75 x 75 mm Max Load kaal: 16 kg Material: plastik, steel, aluminium alloy värv: must Package Content: Mounting hardware, allen wrench
FL50-525WH1 Neomounts by Newstar floor stand Neomounts by Newstar FL50-525WH1 mobile floor stand for 55-86" screens - White The Neomounts by Newstar FL50-525WH1 Move Go is a mobile floor stand for flat screens up to 86" with a maximum weight capacity of 76 kg. Due to the sturdy design and the included touch screen stabilizers, the Move Go is a perfect solution for touch screens. The floor stand is manually adjustable in 4 preset height positions, ranging from 106 to 136 cm. The Neomounts Move Go is packed partially pre-assembled and installation can be done within just minutes. The trolley features practical handles and four solid 7,5 cm double locking caster wheels that allow you to move and use the floor stand wherever you like. Due to the large caster wheels, thresholds or carpets are no challenge to the FL50-525WH1. A multimedia shelf (front and back mountable) with a maximum weight capacity of 10 kg and an AV hardware rack is included and optional for installation. The screen on the trolley can be secured by locking the brackets using a padlock (not included).
DS45-430BL19 Neomounts TV desk stand Neomounts DS45-430BL19 TV desk stand for 23-75" screens - Black The Neomounts DS45-430BL19 is a TV desk stand for screens up to 75" with a weight capacity of 40 kg. The TV stand can be adjusted in height from 42,6-102,6 cm for the optimum viewing position. For maximum compatibility the DS45-430BL19 is suitable for screens that meet pattern 200x200 to 800x400 mm. Additionally, the DS45-430BL19 is also available for non-standard VESA patterns. The DS45-430BL19 TV stand provides an excellent solution for users who prefer not to drill holes in walls or for those who no longer have the original TV stand.
Modern USB-C > HDMI active cable - adapter AXAGON RVC-HI2MC for connecting a HDMI monitor/TV/projector to a notebook or phone using USB-C connector. A hardware converter ensures quality image up to 4K/60Hz Ultra HD resolution without any installation. Popular gaming resolution WQHD 2560 x 1440 at 60, 120 and 144 Hz or FullHD 1920 x 1080 at 60, 120, 144 and 240 Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. Durable cable is equipped with solid metal ends, connectors with a nickel-plated surface and gold-plated contacts. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Video and audio transfer from a computer, laptop, phone or Apple MacBook will now be easy. Compact dimensions provide the possibility to use the cable in insufficient space. The converter dimensions are almost identical to the standard cable connectors. You have an ideal solution - you don't need a cable and converter, with this active cable everything is integrated into one compact unit. The cable is only oneway, i.e. USB-C to HDMI, not otherwise. A USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support of a device with Thunderbolt 3/4 port is required for the adapter to function properly. Input: USB-C USB type C (M) male connector Output: HDMI 2.1a 4K/60Hz HDR10 (before HDMI 2.0a) HDMI (M) male connector Supported resolutions: max. 4096 x 2160 (19:10) @60Hz DCI 4K 3840 x 2160 (16:9) @60Hz UHD-1 4K (UHDTV) 3840 x 1600 (21:9) UW 4K (Ultrawide 1600p) 3840 x 1200 (32:10) 29:9 4K (Super ultrawide 1200p) 3840 x 1080 (32:9) 32:9 4K (Super ultrawide 1080p) 3440 x 1440 (21:9) UWQHD (Ultrawide 1440p) 2560 x 2048 (5:4) QSXGA 2560 x 1920 (4:3) 2560 x 1600 (16:10) WQXGA 2560 x 1440 (16:9) @60, 120 a 144Hz QHD 2560 x 1080 (21:9) UWFHD (Ultrawide 1080p) 2048 x 1536 (4:3) QXGA 2048 x 1152 (16:9) QWXGA 1920 x 1440 (4:3) 1920 x 1200 (16:10) WUXGA 1920 x 1080 (16:9) @60, 100, 120, 144 a 240Hz Full HD/1080p 1856 x 1392 (4:3) 1792 x 1344 (4:3) 1680 x 1050 (16:10) WSXGA+ 1600 x 1200 (4:3) UXGA 1600 x 900 (16:9) HD+ 1536 x 864 (16:9) 1440 x 900 (16:10) WXGA+ 1400 x 1050 (4:3) SXGA+ 1366 x 768 (16:9) HD 1360 x 768 (16:9) HD 1280 x 1024 (5:4) SXGA 1280 x 960 (4:3) SXGA- 1280 x 800 (16:10) WXGA 1280 x 768 (5:3) WXGA 1280 x 720 (16:9) HD/WXGA/720p 1280 x 600 1152 x 864 (4:3) XGA+ 1024 x 768 (4:3) XGA 800 x 600 (4:3) SVGA* the adjustable resolution and frequencies depend on monitor/TV/projector and graphics adapter parameters. Other features: Supported modes: mirroring the desktop (default setting),extension of the primary monitor area. HPD (Hot-Plug-Detect) support - communication sequence controlling the connection/disconnection of the device while running, Support up to 8-channel sound - 96 kHz at 24 bits, HDR (High dynamic range, 10 bit support) support - realistic reproduction of light and dark details. Compliant with USB Type-C Cable and Connector Specification Revision 1.1 specification, Compliant with VESA DisplayPort Alt Mode on USB Type-C Standard Version 1.0 specification, Compliant with USB Device Class Definition for Billboard Devices Revision 1.0 specification. Compliant with HDMI Specification 2.1a 4K/60Hz HDR10 specification (before HDMI 2.0a). TMDS (Transition Minimized Differential Signaling) support - transfer of auxiliary image, sound and additional data. HDCP 2.2 (High-bandwidth Digital Content Protection) support - a mechanism used to protect the digital contents. Support of power saving modes with spinning down controlled by a source device (PC) and a viewing device (monitor/TV). Power supply via USB-C no external power is needed. Dimensions of converter body 48 x 21 x 10 mm, Total cable length incl. connector 180 cm, Weight 70 g, Operating temperature 0 ~ 45°C. Storage temperature: -10 ~ 70°C. Supported OS: Microsoft Windows, macOS, Android and Chrome OS updated. Compatibility depends on the operating system and device manufacturer support. Graphics card drivers may also affect RVC-HI2MC functionality. We recommend downloading the latest version of the drivers. Package contains: USB-C > HDMI cable length 1.8m, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.
