Kuumad pakkumised
Andmesideseadmed
sorteeritud: Populaarsuse järgi kahanevalt
-
-
Huawei ruuter B525 4G
Huawei ruuter B525 on uus premium klassi mobiilside ruuter, mille abil saad jagada kiiret, kuni 300 Mbit/s, 4G internetti WiFi vahendusel juhtmevabalt samaaegselt kuni 64 seadmele. Ruuteri loodav 2,4/5 GHz WiFi leviala on tänu parematele antennidele eelkäijast veelgi tugevam ning võimaldab WiFi levialas andmeedastust kiirusega kuni 786Mbit/s.
Hind
99,00 €
10 pakkumist
-
Huawei E5573C
Aseta mobiilse 4G andmeside teenusega SIM kaart seadmesse ning jaga kiiret 4G mobiilset internetti USB või WiFi vahendusel. E5573C taskuruuter asendab Telia tootevalikus USB netipulka, kuid seda saab vajadusel ka netipulgana kasutada. Erinevalt tavalisest netipulgast saab aga E5573C-ga internetiühendust jagada ka üle WiFi ning seda korraga kuni 10 seadmele.
Hind
39,00 €
1 pakkumine
-
Huawei E5783 B-230 Black
Ei ole päris kindel, millist ruuterit valida? Siis on Sinu jaoks Ruuterit on võimalik rentida ka meie esindustest. Rendi hind on 3 € / kuu (koos KM-ga).
Hind
69,00 €
5 pakkumist
-
Huawei ruuter E5577S
Aseta mobiilse 4G andmeside teenusega SIM kaart seadmesse ning jaga kiiret 4G mobiilset internetti Wi-Fi vahendusel. Andmesidekiiruse kuni 150 Mbit/s saamiseks peab teenus olema aktiveeritud operaatori poolt.
Hind
71,00 €
13 pakkumist
-
Huawei E3372
Aseta 4G mobiilse andmeside teenusega SIM kaart netipulka, Ühenda see USB kaudu arvutiga ja kasuta kiiret 4G mobiilset internetti allalaadimiskiirusega kuni 150 Mbit/s ja üleslaadimiskiirusega kuni 50 Mbit/s. Lisaks on võimalik seadet kasutada mälupulgana sisestades MicroSD kaardi selleks ettenähtud pessa.
Hind
55,20 €
15 pakkumist
-
Huawei ruuter E5186 (kasutatud)
E5186 on 4G ruuter, millel on olemas kõik võimeka ruuteri omadused: allalaadimine kuni 300 Mbit/s, gigased pordid ning lisaks tavalisele 2,4 GHz sagedusele ka kiire 5 GHz WiFi. Tegemist on vähekasutatud seadmega, mis on peale tagastamist testitud, algseadistatud, uuendatud viimase võimaliku 2019 aasta tarkvaraversiooniga ning pakendatud uue seadmega samas komplektsuses. Lisaks annab Telia seadmele uue ruuteriga võrdväärse garantii. Seega on müüdav seade sama hea kui uus, ainult poole soodsam. Aseta vaid mobiilse 4G andmeside teenusega SIM kaart seadmesse ja ühenda ruuter vooluvõrku ning oledki kasutamiseks valmis.
Hind
79,00 €
1 pakkumine
-
115,00 €
17 pakkumist
-
Netgear Nighthawk M1
Netgeari mobiilne ruuter võimaldab liikvel olles teha kõike, mida koduski ning palju enamat. Nighthawk M1 pakub enneolematut ühenduskiirust, suurepärast kvaliteeti, loogilist ja lihtsat kasutust, pikaajalist tulevikukindlust ning hulgaliselt lisavõimalusi, mis muudab seadme asendamatuks kaaslaseks, kus iganes sa ka liigud: olgu siis vajadusteks pakkuda perele ajaviidet puhkuse või pikema teekonna vältel või tagada turvalist ühendust tööasjade tegemisel väljaspool kontorit. 802.11ac, 2.4GHz/5GHz, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 1, Antenna type 2xTS-9 external 3G/4G antennas connectors, 1xUSB-C, 1 Gbps download speeds, and 150 Mbps upload speeds, up to 20 WiFi devices, LTE CAT 16. Net weight: 0.40 kg
Hind
279,66 €
−0,42 € 11 pakkumist
-
Media-Tech 3G HSDPA Modem USB MT4210
Media-Tech modem PRZENOŚNY MODEM 3G HSDPA NA USB MEDIA-TECH MT4210
Hind
24,08 €
1 pakkumine
-
-
Lenovo Sierra EM7345 4G kaart 04X6014
Lenovo sülearvuti ThinkPad EM7345 - GSM,GPRS,UMTS,EDGE,WCDMA,HSPA+, LTE - for ThinkPad L440;L540;T440;T450;T540;T550;W540;W541;W550;X1 Carbon;X240;X250
Hind
238,80 €
1 pakkumine
-
-
-
-
Huawei B618
Huawei B618s-22D LTE RouterToote kirjeldus inglise keeles:Huawei B618 is a new LTE wireless gateway supporting latest LTE Category 11, which means Huawei Router LTE B618 could achieve peak download speed to 600Mbps. Up to 64 wireless devices could connect to Huawei B618 wirelessly simultaneously. It has a built-in Ethernet port, you can connect an external hard drive or printer via the USB port and two external antennas (3G and LTE). Huawei B618s-22d and B618s-65d provide the services including data service, voice service, SMS, Security service, local maintenance management function.Huawei B618 wireless gateway feature and specifications:* 4G LTE Cat9/Cat11 Router* Chipset: HiSilicon Balong 750* Supported Networks: 2G, 3G, 4G, LTE* Super-fast Internet 4G LTE ULTRALTE peak download speed to 600MbpsHuawei B618s-22d Supports:- 4G LTE Band 1/3/7/8/20/38 (FDD 800/900/1800/2100/2600MHz & TDD 2600MHz)- DC-HSPA+/HSPA+/HSPA/UMTS：Band 1/8 2100MHz/900MHz- EDGE/GPRS/GSM：Band 2/3/5/8 1900MHz/1800MHz/850MHz/900MHz
Hind
229,00 €
13 pakkumist
-
2 141,40 €
1 pakkumine
-
43,50 €
1 pakkumine
-
-
MOXA Switch: 12 x 10/100BaseT(X), 4 x 10/100/1000BaseT(X) või x SFP pesa, -40 kuni 75°C
Moxa's Layer 2 managed switches feature industrial-grade reliability, network redundancy, and security features based on the IEC 62443 standard. We offer toughened, industry-specific products with multiple industry certifications, such as parts of the EN 50155 standard for rail applications, IEC 61850-3 for power automation systems, and NEMA TS2 for intelligent transportation systems. Up to 12 10/100/1000BaseT(X) ports and 4 100/1000BaseSFP ports Turbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network security Security features based on IEC 62443 EtherNet/IP, PROFINET, and Modbus TCP protocols supported for device management and monitoring Supports MXstudio for easy, visualized industrial network management V-ON™ ensures millisecond-level multicast data and video network recovery Introduction The EDS-G516E Series is equipped with 16 Gigabit Ethernet ports and up to 4 fiber-optic ports, making it ideal for upgrading an existing network to Gigabit speed or building a new full Gigabit backbone. Gigabit transmission increases bandwidth for higher performance and transfers large amounts of triple-play services across a network quickly. Redundant Ethernet technologies such as Turbo Ring, Turbo Chain, RSTP/STP, and MSTP increase the reliability of your system and improve the availability of your network backbone. The EDS-G500E Series is designed specifically for communication demanding applications, such as video and process monitoring, ITS, and DCS systems, all of which can benefit from a scalable network backbone. Additional Features and Benefits Command line interface (CLI) for quickly configuring major managed functions DHCP Option 82 for IP address assignment with different policies Supports EtherNet/IP, PROFINET, and Modbus TCP protocols for device management and monitoring IGMP snooping and GMRP for filtering multicast traffic Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning Supports the ABC-02-USB (Automatic Backup Configurator) for system configuration backup/restore and firmware upgrade QoS (IEEE 802.1p/1Q and TOS/DiffServ) to increase determinism Port Trunking for optimum bandwidth utilization RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1x, MAC ACL, HTTPS, SSH, and sticky MAC address to enhance network security SNMPv1/v2c/v3 for different levels of network management RMON for proactive and efficient network monitoring Bandwidth management to prevent unpredictable network status Lock port function for blocking unauthorized access based on MAC address Port mirroring for online debugging Automatic warning by exception through email and relay output
Hind
1 939,20 €
1 pakkumine
-
MOXA Switch: 14 x 10/100BaseT(X), 4 x 10/100/1000BaseT(X) or 100/1000BaseSFP port -40 kuni 75°C
Hind
1 514,40 €
1 pakkumine
-
700,20 €
1 pakkumine
-
-
18,99 €
2 pakkumist
-
-
55,99 €
1 pakkumine
-
30,99 €
1 pakkumine
-
96,99 €
1 pakkumine
-
MOXA Muundur 1-portiga PROFIBUS- Modbus/EtherNet/IP, 12-48 VDC, 0 - 60°C
Converts Modbus, or EtherNet/IP to PROFINET Supports PROFINET IO device Supports Modbus RTU/ASCII/TCP master/client and slave/server Supports EtherNet/IP Adapter Effortless configuration via web-based wizard Built-in Ethernet cascading for easy wiring Embedded traffic monitoring/diagnostic information for easy troubleshooting microSD card for configuration backup/duplication and event logs Status monitoring and fault protection for easy maintenance Serial port with 2 kV isolation protection -40 to 75°C wide operating temperature models available Supports redundant dual DC power inputs and 1 relay output Security features based on IEC 62443 Introduction The MGate 5103 is an industrial Ethernet gateway for converting Modbus RTU/ASCII/TCP or EtherNet/IP to PROFINET-based network communications. To integrate existing Modbus devices onto a PROFINET network, use the MGate 5103 as a Modbus master/slave or EtherNet/IP adapter to collect data and exchange data with PROFINET devices. The latest exchange data will be stored in the gateway. The gateway will convert stored Modbus or EtherNet/IP data into PROFINET packets so the PROFINET IO Controller can control or monitor field devices. Easy Configuration via Web Console The MGate 5103 Series comes with an illustrated Quick Setup guide designed to make configuration easy. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps. The MGate 5103 Series also supports a GSDML export function. GSDML files can be imported into PROFINET PLCs to save time on PLC configuration. Modbus RTU/ASCII/TCP Protocol Traffic Monitor MGate 5103 gateways support Modbus RTU/ASCII/TCP Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. Communication issues could be caused by incorrect software parameters, such as slave IDs and register addresses, that were entered incorrectly, or an incorrect command configuration. With Modbus RTU/ASCII/TCP Protocol Traffic Monitor, you can check the captured data and easily identify the root cause. Maintenance Functions MGate 5103 gateways support a system log function that records events in the MGate; users can easily review log data remotely through the web console. The gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PLC/DCS/SCADA system when a Modbus device gets disconnected or does not respond, in which case the process PLC/DCS gets the status of each end device and then issues alarms to notify operators.
Hind
580,80 €
1 pakkumine
-
-
-
MOXA 1-portiga Modbus RTU/ASCII/TCP/IEC 101-to-IEC 104 gateways, -40 to 75°C
Protocol conversion between Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 Supports IEC 60870-5-101 master/slave (balanced/unbalanced) Supports IEC 60870-5-104 client/server Supports Modbus RTU/ASCII/TCP master/client and slave/server Effortless configuration via web-based wizard Status monitoring and fault protection for easy maintenance Embedded traffic monitoring/diagnostic information for easy troubleshooting microSD card for configuration backup/duplication and event logs Built-in Ethernet cascading for easy wiring Redundant dual DC power inputs and relay output -40 to 75°C wide operating temperature models available Serial port with 2 kV isolation protection Security features based on IEC 62443, Introduction The MGate 5114 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port for Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 network communications. By integrating commonly used power protocols, the MGate 5114 provides the flexibility needed to fulfill the various conditions that arise with field devices that use different communications protocols to connect to a power SCADA system. To integrate Modbus or IEC 60870-5-101 devices onto an IEC 60870-5-104 network, use the MGate 5114 as a Modbus master/client or IEC 60870-5-101 master to collect data and exchange data with IEC 60870-5-104 systems. Easy Configuration via Web Console The MGate 5114 Series comes with an illustrated Quick Setup guide designed to make configuration easy. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps. Modbus RTU/ASCII/TCP Protocol Traffic Monitor MGate 5114 Series gateways support Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. It is worth mentioning that traffic logs can be viewed in the popular troubleshooting tool, Wireshark. With this feature, you can easily analyze traffic to determine the root cause of a problem. Maintenance Functions MGate 5114 gateways support a system log function that records events in the MGate; users can easily review log data remotely through the web console. The gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PSCADA system when a device gets disconnected or does not respond, in which case the PSCADA system gets the status of each end device and then issues alarms to notify operators.
Hind
727,20 €
1 pakkumine
-
MOXA Manageeritav SHDSL võrgu laiendaja koos switchiga: 1 x 10/100BaseT(x), 1 x DSL, -40 kuni 75 °C
Automatic CO/CPE negotiation reduces configuration time Link Fault Pass-Through (LFPT) support and interoperable with Turbo Ring and Turbo Chain LED indicators to simplify troubleshooting Easy network management by web browser, Telnet/serial console, Windows utility, ABC-01, and MXview Introduction The IEX-402 is an entry-level industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender provides a point-to-point extension over twisted copper wires based on the G.SHDSL or VDSL2 standard. The device supports data rates of up to 15.3 Mbps and a long transmission distance of up to 8 km for G.SHDSL connection; for VDSL2 connections, the data rate supports up to 100 Mbps and a long transmission distance of up to 3 km. The IEX-402 Series is designed for use in harsh environments. The DIN-rail mount, wide operating temperature range (-40 to 75°C), and dual power inputs make it ideal for installation in industrial applications. To simplify configuration, the IEX-402 uses CO/CPE auto-negotiation. By factory default, the device will automatically assign CPE status to one of each pair of IEX devices. In addition, Link Fault Pass-through (LFP) and network redundancy interoperability enhance the reliability and accessibility of communication networks. In addition, advanced managed and monitored functionality through MXview, including a virtual panel, improve the user experience for quick troubleshooting. Additional Features and Benefits Standard G.SHDSL data rate up to 5.7 Mbps, with up to 8 km transmission distance (performance varies by cable quality) Moxa proprietary Turbo Speed connections up to 15.3 Mbps Supports Link Fault Pass-Through (LFP) and Line-swap fast recovery Supports SNMP v1/v2c/v3 for different levels of network management Interoperable with Turbo Ring and Turbo Chain network redundancy Support Modbus TCP protocol for device management and monitoring Compatible with EtherNet/IP and PROFINET protocols for transparent transmission IPv6 Ready
Hind
806,40 €
1 pakkumine
-
MOXA Moodul Ethernet 8 PoE+ 100BaseT(X) PoE/PoE+
Ethernet Interface PoE Ports (10/100BaseT(X), RJ45 connector) 8 Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-X connection Standards IEEE 802.3af/at for PoE/PoE+ output Optical Fiber Optical Fiber Power Parameters Power Consumption 1.21 W (max.) Physical Characteristics Weight 260 g (0.58 lb) MTBF Time 338,800 hrs Standards Telcordia (Bellcore), GB Warranty Warranty Period 5 years
Hind
568,20 €
1 pakkumine
-
-
58,99 €
1 pakkumine
-
-
-
-
-
0,99 €
1 pakkumine
- 1
- « Eelmine
- Järgmine »
- Tooted 1-46/46