Apple Lightning to USB 3 kaameraadapter võimaldab lihtsat ja kiiret fotode ja videote ülekandmist kaamerast või USB-seadmest sinu iPhone'i või iPad'i. See adapter toetab ka võimsaid USB-seadmeid ning võimaldab samal ajal seadme laadimist, pakkudes mugavust ja mitmekülgsust. Ühendades iPad Pro kaameraga avaneb Photo äpp ja lubab alla laadida ja organiseerida pilte. • Fotode ja videote kiire ülekandmine • Toetab võimsaid USB-seadmeid • Võimaldab samaaegset laadimist • Ühildub iPhone'i ja iPad'iga • Lihtne ja mugav kasutamine
2 metal plates kit 2 metal plates for attaching the phone to the magnetic mount. The set includes two round metal plates, one of which is covered with black leather. ProducentBaseusModelMagnet Iron SuitProduct codeACDR-A0SMaterialAluminiumPurposePlate for mounting the phone on a magnetic mountColorSilver, black
Active extension AXAGON ADR-205 USB 2.0 cable, 5 m long. The USB repeater cable strengthens the passing USB signal and allows you to connect a significantly more distant USB device than the usual 5 meters when passive cables are used. You can connect several repeater cables in a row. A great advantage of the ADR-205 extension is an integrated auxiliary power supply connector. In most cases, USB bus power is sufficient, but for devices with larger power consumption the USB power supply may be inadequate and auxiliary power from the mains may resolve the problem. The remarkably compact body of the AXAGON repeater allows for trouble-free use in electrical installation strips or cable systems. The use of a high quality shielded cable ensures high communication speed and minimal undesirable interference. Input: USB 2.0 for connection to a computer USB Type A male connector to connect to the computer Output: USB 2.0 for connecting a remote USB device USB Type A (F) female connector transmission rate 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a connector ( 3.5 x 1.3 mm outer x internal diameter) for additional external power supply of 5V/1-2 A. The power cable USB A-M / 3.5 mm jack, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-DS16. When powering the repeater cable with the power adapter, an external 2.5" disk can be connected without the need for own power supply to the disk. For longer USB route with multiple repeater cables connected in a row, the USB bus supply may be inadequate for USB devices with lower power consumption than an external 2.5" drive. Also in this case it can help to boost the power supply by connecting a power adapter. Other features: Fully compatible with USB 2.0 and backward compatible with USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB connection. Behind the active USB cable, a common passive USB cable can also be used. Dimensions of active part with are 56 x 22 x 14 mm, cable length 5 m. Weight 170 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 and later (all 32- and 64-bit Windows versions supported), Mac OS X .x and higher Linux with 2.6.x kernel and higher. Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 2.0 A-M > A-F active repeater 5 m long, USB-A / 3.5 mm power cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
USB-C M/M 3.1 gen 2 cable 1.8M 10GB/S PD100W black The USB Type C 3.1 generation 2 cable is still one of the latest USB standards available on the market. It allows uncompromising data transfer speeds of up to 10Gbps, 2 times faster than USB 3.0 and over 20 times faster than USB 2.0! The latest standard also supports video transmission with a maximum resolution of 4K and a refresh rate of 60Hz! The cable has support for Quick Charge 4.0 Technology, as well as Power Delivery 3.0 which allows you to power a variety of home appliances - with a maximum power output of up to 100W! USB specification: 3.1 generation 2 Transfer speeds of up to 10 Gb/s Backwards compatible with USB 3.1, 3.0, 2.0, 1.1 Chipset: HUSB332 Triple shielding Support for Quick Charge Technology version 4.0 Support for Power Delivery Technology 100W (20V / 5A) Maximum transmitted image resolution: 3980 x 2160 @ 60Hz Conductor thickness: 32 AWG Gold-plated contacts Braid: PVC
The RaidSonic ICY BOX IB-HUB1717-U3 is recognized for its ability to expand connectivity options. This hub features 17 USB 3.2 Gen 1 ports, each capable of delivering data transfer rates up to 5 Gbps, making it suitable for high-speed data management and device charging. Designed with a robust aluminum housing and powered by an external 96 W power adapter, it ensures that all connected devices are adequately powered and protected. Its desktop form factor, combined with Plug-and-Play and UASP support, offers seamless integration into any setup, enhancing productivity without the need for complex installations. Whether for professional or personal use, the IB-HUB1717-U3 is a reliable hub that meets the demands of modern digital environments.
The AXAGON ACU-QC18W USB wallcharger is designed for charging mobile devices. With 18W of maximum power, the charger charges phones, tablets and other mobile devices at the highest possible speed. The adapter offers a standard USB-A connector. The charger is equipped with Quick Charge 3.0 USB Type-A enabling fast charging of smartphones and tablets with a power of up to 18W. The adapter is also compatible with other fast phone charging standards such as Apple iPhone, iPad, Samsung, Huawei, Honor, Xiaomi, Motorola and other. The advanced protection system at the charging adapter output protects the device being charged from damage. The charger function also detects the device being charged and selects the optimal charging speed and progress. The body of the power adapter has a pleasant shape and compact size. The combination of small dimensions and a wide range of input voltages, makes the charger an ideal travel helper. Input: input voltage AC 100V-240V / 0.4A / 50-60 Hz (function WIV), supports multiple national power standards two-pin euro plug - integrated in the body of the charger Output: USB-A port QC (phones) max. 18W: 5V/3A, 9V/2A, 12V/1.5A Charging technology: QC 3.0, QC 2.0, AFC, FCP, SMART, Apple 2.4A Maximum power: maximum power 18W maximum current 3A Supported charging technologies: Standard charging of all devices that support 5V and Apple iPhone 5, 6, SE, 7 charging. SMART - charging max. 5V/3A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A) and Apple 2.4A (iPad). FCP - quick charging using Huawei Fast Charge Protocol. AFC - quick charging using Samsung Adaptive Fast Charging protocol. QC - quick charging using Qualcomm Quick Charge 2.0, Quick Charge 3.0. The charger supports WIV, AIC and CC functions: Wide Input Voltage - function of a wide range of input voltage; it protects the adapter against undervoltage and overvoltage at the input and allows the use of more national power standards. Automatic Intelligent Communication - function of automatic recognition of the connected device to select optimal charging parameters. Constant Output Current - the current hold function prevents the output power fluctuations; this function ensures steady course of charging. Complex output protection: OCP, OVP, OTP, OSP: Over Current Protection. Protection of output against current overload. Over Voltage Protection. Protection against overvoltage at the output. Over Temperature Protection. Protection against overheating of the adapter. Output Short Circuit Protection. Short circuit protection at the output. Other features:dimensions of the charger body 79 x 42 x 27 mm including a plug, weight: 47 g, material: non-flammable plastic. Package contains: white wall charger, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
The compact wallcharger AXAGON ACU-PD20 enables fast charging of mobile devices. With 20W of maximum power, the charger charges phones, tablets and other mobile devices at the highest possible speed. The adapter offers a reversible USB-C connector. The charger is equipped with Power Delivery 3.0 / Quick Charge 4+ USB Type-C, enabling fast charging of smartphones and tablets with a power of up to 20W. The charger supports 20W PD charging for iPhone 12, 13, 14 and 15 and their Pro and Pro Max models. The adapter is also compatible with other fast phone charging standards such as Apple iPhone, iPad, Samsung, Huawei, Honor, Xiaomi. The advanced protection system at the charging adapter output protects the device being charged from damage. The charger function also detects the device being charged and selects the optimal charging speed and progress. The body of the power adapter has a pleasant shape and compact size. The combination of small dimensions and a wide range of input voltages, makes the charger an ideal travel helper. Input: input voltage AC 100V-240V / 1A / 50-60 Hz (WIV function) supports multiple national power standards two-pin euro plug - integrated in the body of the charger Output: USB-C port PD (tablets, phones) max. 20W: 5V/3A, 9V/2.22A, 12V/1.67A, PPS: 3-5V/3A, 3-11V/1A Charging technology: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, AFC, FCP, SMART, Apple PD, Apple 2.4A Maximum power: maximum power 20W maximum current 3A Supported charging technologies: Standard charging of all devices that support 5V and Apple iPhone 5, 6, SE, 7 charging. SMART - charging max. 5V/3A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A) a Apple 2.4A (iPad). FCP - quick charging using Huawei Fast Charge Protocol. AFC - quick charging using Samsung Adaptive Fast Charging protocol. QC - quick charging using Qualcomm Quick Charge 2.0, Quick Charge 3.0 and Quick Charge 4+ protocol. PPS - quick charging using the Programmable Power Supply protocol (part of USB PD 3.0 and QC4+). PD - quick charging using USB Power Delivery 2.0 and Power Delivery 3.0 protocol. Examples of supported phones and tablets: PD - quick charging of Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max phone. PD - quick charging (up to 20W) Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 13 Pro, 13 Pro Max, 14, 14 Plus, 14 Pro, 14 Pro Max, 15, 15 Plus, 15 Pro, 15 Pro Max phones. PD - quick charging (up to 20W) iPad mini, iPad Air, iPad Pro and other tablets. The charger supports WIV, AIC and CC functions: Wide Input Voltage - function of a wide range of input voltage; it protects the adapter against undervoltage and overvoltage at the input and allows the use of more national power standards. Automatic Intelligent Communication - function of automatic recognition of the connected device to select optimal charging parameters. Constant Output Current - the current hold function prevents the output power fluctuations; this function ensures steady course of charging. Complex output protection: OCP, OVP, OTP, OSP: Over Current Protection. Protection of output against current overload. Over Voltage Protection. Protection against overvoltage at the output. Over Temperature Protection. Protection against overheating of the adapter. Output Short Circuit protection. Short circuit protection at the output. Other features: dimensions of the charger body 84 x 36 x 32 mm including a plug, weight: 52 g, material: non-flammable plastic. Package contains: black wall charger, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Save time and money with Natec Ribera GaN Faster charging and less power consumption. Meet the 30W Natec Ribera GaN - a multi-port charger with which you can top up the energy of 2 devices simultaneously (also selected laptops that support the PD standard). From now on, it will take even less time thanks to fast charging technology and higher energy efficiency, resulting from the use of gallium nitride (GaN) - a new, more efficient semiconductor, also positively affecting the size of the charger. Smaller, lighter, more efficient. This is the Natec Ribera GaN. Main features Faster and more Want to replenish not 1, but 2 devices at the same time? With the Natec Ribera GaN you will do it with ease. We have equipped our charger with two USB ports (USB Type A and USB-C) with a total power of 30 watts. What's more, with support for fast charging technologies (Power Delivery 3.0, Quick Charge 3.0, Samsung AFC, Huawei FCP/SCP) you'll do it even faster than before, and that's not all. Natec Ribera GaN uses the PPS protocol, a brand new charging scheme that allows you to charge different devices regardless of brand. It automatically adjusts the charging parameters adapting them to the connected equipment. Big time savings compared to classic solutions? With Natec Ribera GaN you can count on it. Protect the environment and save money Save money and take care of the environment. Using gallium nitride (GaN) allowed us to create a charger with higher energy efficiency. This means not only better performance and lower power consumption, but also greater durability and less risk of failure even when operating in very demanding conditions. As a result, you can be sure that Natec Ribera GaN will stay with you for longer. Great power, small size Natec Ribera GaN will easily fit not only into a backpack or bag, but also a small pocket. Unlike classic chargers that use silicon, we used much smaller and lighter electronics in Natec Ribera GaN, which allowed to reduce the size of the charger even by half. Even easier to transport and use in any situation. Is more needed? Safety above all The safety of your electronics is our top priority. That's why Natec Ribera GaN boasts overvoltage and overcurrent protection (OVP and OCP), short circuit protection (SCP), and even overheating protection (OTP).
Apple iPhone jaoks loodud MagSafe’iga silikoonümbris pakub stiilset ja vastupidavat kaitset. Valmistatud 55% taaskasutatud silikoonist, on sellel ümbrisel siidine ja pehme välispind, mis tundub käes suurepärane. Sisemine mikrokiust vooder tagab lisakaitse. Sisseehitatud magnetid võimaldavad kiiret MagSafe laadimist ning ümbris töötab sujuvalt koos iPhone 16 kaamera juhtimise funktsioonidega. • Pehme ja mugav siidine viimistlus • Valmistatud 55% taaskasutatud silikoonist • Sisseehitatud MagSafe toega • Mikrokiust vooder lisakaitseks
Apple iPhone 16 Pro Max siidiselt pehme kattega silikoonümbris, millel on sisseehitatud MagSafe magnetid, mis muudavad ümbrise kinnitamise ja eemaldamise lihtsamaks kui iialgi varem. Ilma ümbrist eemaldamata saate kasutada nii Qi kui ka MagSafe laadimist. Lisaks saab ümbrise tagaküljele mugavalt kinnitada ka rahatasku.
Mugav, stiilne ja õhuke ümbris, mis kaitseb telefoni lisamata lisaraskust. Ümbrisesse sisse ehitatud ka kaarditasku veelgi mugavamaks kasutamiseks. Kaitseb telefoni kukkumiste ja kulumise eest.
CARE by PanzerGlass Magnetic kaitseümbris - Tugev ja vastupidav!1-aastane garantii kollaseks muutumise vastu! Kaitseb telefoni kaunist disaini, mille eest maksid Testitud taluma kukkumist
The Rugged Case has proven its ability to withstand falls from as high as 1.2M, onto rough surfaces like steel. Its design and pattern yield protection and optimal grip on your phone.
Forget about empty batteries – this powerful charger ensures that you are quickly charged at all times, whether you are working, traveling or in everyday life. With impressive efficiency and compatibility for smartphones, tablets and laptops, the charger intelligently adapts to your devices and saves you valuable time. USB-A port USB - USB-C cable included Output power: 33 W Max charging current: 3 A
Samsungi Fold7 silikoonümbris pakub seadmele kaitset ja mugavat pehmust, tagades turvalise haarde ja lihtsa käsitsemise. Ümbris on varustatud tugijalaga, mis täiustab suure ekraani kasutuskogemust. Fold7 silikoonümbris on disainitud kaks-ühes lahendusena, pakkudes mugavat haaret ja kiiret tuge, mis teeb seadme käsitsemise lihtsaks ja parandab suure ekraani kasutuskogemust.
Silikoonümbris pakub elegantset disaini, meeldivat tunnetust ja usaldusväärset igapäevast kaitset. Jätkusuutlikkust silmas pidades on see valmistatud taaskasutatud materjalidest. • õhuke ja stiilne pehme viimistlusega • tekstuuriga pind mugavaks ja kindlaks haardeks • keskkonnasõbralik disain taaskasutatud materjalidest
Õhuke ja kerge Bumper on valmistatud tugevdatud polükarbonaadist, pakkudes lisakaitset servadele. Uus nupudisain tagab täpse ja klõpsuva tagasiside. See raamib elegantselt iPhone Air’i ülivinge profiili, pakkudes samal ajal kindlat kaitset. • täiustatud servakaitse õhukeses vormis • täielikult ühilduv Camera Control’iga • kinnitub kindlalt Apple Crossbody Strap rihmale
iPhone FineWoven Wallet koos MagSafe’iga on stiilne ja funktsionaalne aksessuaar, mis hoiab sinu ID- ja pangakaardid mugavalt käepärast. Valmistatud vastupidavast mikrotviidist, see rahakott kasutab 100% taaskasutatud materjale ning vähendab süsinikuheidet võrreldes nahaga. Tänu MagSafe tehnoloogiale kinnitub see tugevalt iPhone’i külge ja toetab Find My funktsiooni, et jälgida selle viimast asukohta. • Valmistatud 100% taaskasutatud materjalidest • MagSafe’iga kiire ja kindel kinnitus • Toetab Find My funktsiooni • Mahutab kuni kolm kaarti
Xiaomi Nano Power Adapter is a compact GaN technology-based fast charger that offers excellent performance at home, work, and travel. The charger has one USB-C port for charging smartphones, smartwatches, tablets, etc.GaN (gallium nitride) technology ensures high power, fast charging speed, and better thermal conductivity in a compact body. The charger supports up to 33W output power with QC/PD/PPS fast charging protocols. The charger is optimized for Apple, Samsung, and other devices in addition to Xiaomi smart devices. USB-C Wall Charger Maximum output power: 33W Supports Power Delivery 3.0, Quick Charge and PPS fast charging GaN technology ensures high performance and compactness Compact design - ideal for everyday use and travel Smart chip optimizes charging according to device Achievable charge level with 30-minute fast charging: iPhone 16: 58% iPhone 16 Pro Max: 55% Samsung Galaxy S24+: 56% Samsung Galaxy S24 Ultra: 54% Redmi Note 14: 55% Xiaomi Pad 6: 37%
See Samsungi ümbris ühendab õhukese profiili ja usaldusväärse igapäevase kaitse. See istub tihedalt ümber seadme, aidates kaitsta kriimustuste ja väiksemate põrutuste eest ning säilitades puhta ja stiilse välimuse. • Õhuke ja kerge disain • Vastupidav konstruktsioon igapäevaseks kasutuseks • Kaitse kriimustuste ja kulumise eest • Lihtne ligipääs kõigile nuppudele ja portidele
Super Si seeria kiirlaadija USB-C ühendusega; Komplektis USB-C -> Lightning kaabel Apple toodete laadimiseks; Võimsus 20W; Kaabli pikkus 1m; Laeb telefoni täis oluliselt kiiremini kui tavaline laadija
