Touch light switch WiFi + RF 433 Sonoff T2 EU TX (3 channel) new version.Sonoff TX is a touch and smart light switch. It can be operated using an app via WiFi or classically, by touch. You can turn on the light in the room of your choice at home, no matter where you are. Made of high-quality materials, such as heat-resistant ABS and tempered glass, it ensures safety and blends in perfectly with any room. The gentle backlighting of the switch, subtly enhances its design and makes it visible at night.Control for all household membersUsing the app, you can easily share the ability to control the lighting with other users.OperationUsers can remotely operate connected devices via the free eWeLink app available on iOS and Android platforms. Touch and remote control (433MHz) operation is also possible. Thanks to the network connection, device status synchronization is done instantly, so the app always displays up-to-date data. This allows us to maintain full control over excessive power consumption in our home.Smart controlYou can set your own time schedules to automatically turn appliances on/off at a certain time or after a certain time.Mobile controlWith the ability to control your lighting via an app, you can easily turn on or off the lights in your home while you are away. The app is very easy to use, allowing you to select a specific switch. You no longer have to worry about the light being left on. ModelT2EU3C-TXVoltage100~240 V ACMaximum current1 A (channel)Maximum LED power100 W (channel)ColorWhiteWiFi802.11 b/g/nWiFi encryptionWPA-PSK/WPA2-PSKMaterialTempered glass / PC V0Number of channels3Dimensions of mounting hole86 mm x 86 mm x 35 mm
Shelly Qubino Wave Pro 3 Z-Wave 3-Channel DIN Rail RelayShelly Qubino Wave Pro 3 is an advanced 3-channel DIN-rail-mounted Z-Wave relay that provides reliable control of lighting and electrical devices in homes and commercial buildings. It supports a load of up to 48 amps (16 amps per channel), features potential-free contacts and offers the highest level of security with S2 encryption. The device works with more than 4,000 certified Z-Wave devices, allows remote control via smartphone and automatic addition to the network thanks to SmartStart technology. Low power consumption (< 0.3 watts), support for Z-Wave 800 Series, and overheat and surge protection make it an indispensable part of any installation.Ideal for new installationsShelly Wave Pro 3 is a professional relay designed for newly built homes and commercial buildings. With three independent channels of 16 amps each (48 amps total), it will easily handle lighting, household appliances or HVAC systems. Equipped with potential-free contacts, it provides full flexibility for a variety of applications - both low and high voltage. It's precision that transforms energy management.Advanced Z-Wave 800 technologyThe device operates on the Z-Wave protocol in the 908.4 MHz band and uses the innovative Z-Wave 800 Series chipset, which offers improved range and communication stability. The Shelly Qubino Wave Pro 3 can be easily integrated into an existing Z-Wave network thanks to the SmartStart function, and its compatibility with more than 4,000 certified devices guarantees extensive integration possibilities regardless of brand or manufacturer.Maximum security and energy savingsWith Security 2 support, the device communicates on the network with full AES128 encryption, ensuring the highest level of security. In addition, it features extremely low power consumption (less than 0.3 watts), resulting in lower operating costs and greater energy efficiency.Reliable installation and wide rangeShelly Wave Pro 3 mounts on a DIN rail inside an electrical switchboard in accordance with international standards. With its Z-Wave repeater function, the device extends the network range up to 40 meters inside the building. It can be controlled remotely via a smartphone app, and automatic scenarios and schedules can be created to fit your daily routine or business needs. It's a convenient solution that adapts to your preferences.Versatility of applications and local communicationThe device allows direct links between other Z-Wave products, even without a hub. It will be perfect for controlling lighting, valves, heating and cooling, offering dynamic management of the home or office environment. Built-in protection against overheating, overload and overvoltage, as well as an enclosure made of fireproof material (V-0), increase the level of reliability and safety of the entire installation. ManufacturerShellyModelQubinoWavePro3Power supply110 - 240 V AC, 50/60 HzPower consumption< 0.3WPower measurement [W].NoneMax. switching voltage AC240 VMax. switching current AC16 A per channel, 48 A totalMax. DC switching voltage30 VMax. DC switching current16 A per channel, 48 A totalProtection against overheatingYesRangeUp to 40 meters in open spaceZ-Wave® repeaterYesCPUZ-Wave® S800Z-Wave frequency bands908.4 MHzDimensions96 x 53 x 59 ± 0.5 mmWeight150 gMountingDIN railMaximum tightening torque of screw terminals0.4 NmCable cross section0.5 to 2.5 mm² / 20 to 14 AWG (green connector)Length of stripped wire6 to 7 mm (green connector)Housing materialPlasticColorBlackAmbient temperature-20°C to 40°CHumidity30% to 70% RHMaximum altitude2000 mCompatible devicesZ-Wave enabled devices, Z-Wave gateway, routers, smartphones
X-Sense CO Sensor CO-3D-W Link+.The X-Sense CO03D-W Link+ is an advanced wireless carbon monoxide sensor that offers the highest level of protection against the dangerous and odorless gas carbon monoxide (CO). With its wireless connectivity feature, this sensor creates a safety network in the home, allowing it to synchronize with other X-Sense Link+ alarms, meaning that when one sensor detects a danger, all other devices on the network immediately sound the alarm. This advanced feature gives you the maximum level of protection and the assurance that everyone in the house will be immediately alerted to a threat, no matter where they are.Wireless network for complete protectionThe CO03D-W detector uses Link+ wireless technology, which allows up to 24 devices to be connected on a single network, making it an ideal choice for large homes or multi-story buildings. When one device detects the presence of carbon monoxide, all other alarms on the network will sound immediately, alerting the entire family to the danger. With this solution, all household members can be sure they are protected, even if they are far from where the danger is detected.Precision Figaro CO SensorInside the X-Sense CO03D-W sensor is a high-end electrochemical sensor from Figaro, which provides reliable and precise detection of carbon monoxide. The sensor responds to different concentrations of CO depending on their level, triggering an alarm faster in the event of a greater threat, allowing for faster rescue efforts. For example, at a concentration of 30 ppm, the alarm will be triggered after 120 minutes, but at a concentration of 300 ppm, after only 3 minutes.LCD display and LED indicationWith an easy-to-read LCD display, you can monitor the level of CO concentration in the room in real time, allowing you to monitor the situation at all times. The tri-color LED indicators - green, yellow and red - provide additional information about the device's status, such as operational readiness, low battery and alarm signal. A high-pitched audible alarm of ≥85 dB at 1 meter ensures that the signal will not be missed, even in noisy environments.Replaceable batteries and low power warningThe sensor is powered by three AA alkaline batteries, which can be easily replaced, allowing for long-term use of the device. A built-in low-battery warning system ensures that you will be notified when the batteries need to be replaced, guaranteeing uninterrupted operation of the sensor.Test and mute functionThe X-Sense CO03D-W is equipped with a test/silence button that allows you to easily test the sensor and mute the alarm when needed. Regular testing of the alarm is key to making sure it is working properly. If a false alarm is detected, the beep can be silenced for up to 9 minutes, eliminating the need to immediately dismantle the unit.Compact design and easy installationThe X-Sense CO03D-W carbon monoxide detector features a modern and compact design, making it fit discreetly into any interior. Its small size (110 x 110 x 37 mm) and lightweight design facilitate installation, which is quick and easy, thanks to the included mounting accessories.IncludedCO sensor x1Mounting bracket x1Mounting screws x2Mounting pins x21.5V AA alkaline batteries x3Instruction manual x1 ManufacturerX-SenseModelCO03D-WSafety standard:EN 50291-1:2018Sensor type:Electrochemical (Figaro)Service life:10 yearsPower supply:3 × 1.5 V AA alkaline batteries (replaceable)Alarm level:≥ 85 dB at 1 mOperating temperature range:4.4-37.8°C (40-100°F)Operating humidity:≤ 85% RH (non-condensing)Mute time:≤ 9 minutesIndicators:Red, green and yellow LEDsProduct weight:133 gProduct dimensions:110 x 110 x 37 mmMaximum number of connected devices:24 units
AQARA Adjustable Cylinder (AL-D01D) AQARA Adjustable Cylinder is the perfect cylinder for your AQARA Smart Lock U200. Easy to customize Modular solution Emergency function Compatible with almost every door in Europe Perfect companion for AQARA Smart Lock U200 2 keys included, easy copying of key, no security card needed Suggested thickness of the door 40－80mm
LightSwitch combines the reliability of professional security systems and a thoughtful user experience. The smart switch from Ajax has a large touch-sensitive panel that can be activated both by tap and contactless – just put your hand less than 15 mm close. A soft backlight helps do this in the dark. With LightSwitch, it's easy to turn on lights and floor lamps, control curtains or blinds, even remotely. LightSwitch is easy to install: it is sized to fit into a standard European socket, does not require a neutral wire and connects to the security system by scanning a QR code. The settings in the app allow you to turn on the lights by schedule, when disarming the security system or in response to an alarm. The switch is available in eight colours, has one-gang, two-gang and two-way versions. LightSwitch is a prefabricated smart light switch. All switch elements are purchased separately. Elements are connected mechanically without the use of tools. There are two LightSwitch formats in the Ajax product line: single and combined. A single LightSwitch consists of two elements: a LightCore relay and a SoloButton touch-sensitive panel. A combined switch consists of several LightCore relays and touch-sensitive panels installed in one frame with the appropriate number of seats. The device is designed for indoor installation only. A professional electrician should install a device.
LightSwitch combines the reliability of professional security systems and a thoughtful user experience. The smart switch from Ajax has a large touch-sensitive panel that can be activated both by tap and contactless – just put your hand less than 15 mm close. A soft backlight helps do this in the dark. With LightSwitch, it's easy to turn on lights and floor lamps, control curtains or blinds, even remotely. LightSwitch is easy to install: it is sized to fit into a standard European socket, does not require a neutral wire and connects to the security system by scanning a QR code. The settings in the app allow you to turn on the lights by schedule, when disarming the security system or in response to an alarm. The switch is available in eight colours, has one-gang, two-gang and two-way versions. LightSwitch is a prefabricated smart light switch. All switch elements are purchased separately. Elements are connected mechanically without the use of tools. There are two LightSwitch formats in the Ajax product line: single and combined. A single LightSwitch consists of two elements: a LightCore relay and a SoloButton touch-sensitive panel. A combined switch consists of several LightCore relays and touch-sensitive panels installed in one frame with the appropriate number of seats. The device is designed for indoor installation only. A professional electrician should install a device.
LightSwitch combines the reliability of professional security systems and a thoughtful user experience. The smart switch from Ajax has a large touch-sensitive panel that can be activated both by tap and contactless – just put your hand less than 15 mm close. A soft backlight helps do this in the dark. With LightSwitch, it's easy to turn on lights and floor lamps, control curtains or blinds, even remotely. LightSwitch is easy to install: it is sized to fit into a standard European socket, does not require a neutral wire and connects to the security system by scanning a QR code. The settings in the app allow you to turn on the lights by schedule, when disarming the security system or in response to an alarm. The switch is available in eight colours, has one-gang, two-gang and two-way versions. LightSwitch is a prefabricated smart light switch. All switch elements are purchased separately. Elements are connected mechanically without the use of tools. There are two LightSwitch formats in the Ajax product line: single and combined. A single LightSwitch consists of two elements: a LightCore relay and a SoloButton touch-sensitive panel. A combined switch consists of several LightCore relays and touch-sensitive panels installed in one frame with the appropriate number of seats. The device is designed for indoor installation only. A professional electrician should install a device.
LightSwitch combines the reliability of professional security systems and a thoughtful user experience. The smart switch from Ajax has a large touch-sensitive panel that can be activated both by tap and contactless – just put your hand less than 15 mm close. A soft backlight helps do this in the dark. With LightSwitch, it's easy to turn on lights and floor lamps, control curtains or blinds, even remotely. LightSwitch is easy to install: it is sized to fit into a standard European socket, does not require a neutral wire and connects to the security system by scanning a QR code. The settings in the app allow you to turn on the lights by schedule, when disarming the security system or in response to an alarm. The switch is available in eight colours, has one-gang, two-gang and two-way versions. LightSwitch is a prefabricated smart light switch. All switch elements are purchased separately. Elements are connected mechanically without the use of tools. There are two LightSwitch formats in the Ajax product line: single and combined. A single LightSwitch consists of two elements: a LightCore relay and a SoloButton touch-sensitive panel. A combined switch consists of several LightCore relays and touch-sensitive panels installed in one frame with the appropriate number of seats. The device is designed for indoor installation only. A professional electrician should install a device.
LightSwitch combines the reliability of professional security systems and a thoughtful user experience. The smart switch from Ajax has a large touch-sensitive panel that can be activated both by tap and contactless – just put your hand less than 15 mm close. A soft backlight helps do this in the dark. With LightSwitch, it's easy to turn on lights and floor lamps, control curtains or blinds, even remotely. LightSwitch is easy to install: it is sized to fit into a standard European socket, does not require a neutral wire and connects to the security system by scanning a QR code. The settings in the app allow you to turn on the lights by schedule, when disarming the security system or in response to an alarm. The switch is available in eight colours, has one-gang, two-gang and two-way versions. LightSwitch is a prefabricated smart light switch. All switch elements are purchased separately. Elements are connected mechanically without the use of tools. There are two LightSwitch formats in the Ajax product line: single and combined. A single LightSwitch consists of two elements: a LightCore relay and a SoloButton touch-sensitive panel. A combined switch consists of several LightCore relays and touch-sensitive panels installed in one frame with the appropriate number of seats. The device is designed for indoor installation only. A professional electrician should install a device.
