Nutikodu seadmed

Elektroonilised lambipirnid Philips Hue Smart Spotlight, GU10, 3 tk.

Works with various types of switches and buttons; Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption; Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network); May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers The remotely operated FIBARO Smart Module and Double Smart Module are designed to turn electrical devices or circuits on and off; Smart Module (FGS-214) allows to control one device or circuit and the Double Smart Module (FGS-224) allows to control two devices or circuits; The compact size of the device allows for the product to be installed in the housings of other devices. The devices can be controlled either via the Z-Wave network or with buttons connected directly to them

Fibaro Roller Shutter 4, Z-Wave Plus EU

SONOFF SNZB-05P ZigBee flood/water leak sensor kit + WLDC200 cable.The SONOFF SNZB-05P kit with WLDC200 cable is a comprehensive solution that effectively protects your home from flooding and water leaks. The SNZB-05P sensor, using the ZigBee 3.0 protocol, is distinguished by its high-precision operation and corrosion resistance thanks to its gold-plated probes and IP67-rated design. The WLDC200 extension cable significantly increases the monitoring range and enables water detection even in hard-to-reach areas such as basements, under HVAC systems or around water heaters. Together, they form a reliable duo that can detect even the smallest leaks in time and minimize the risk of costly damage.Advanced technology and reliable performanceThe SNZB-05P sensor is equipped with a concave water-collecting design that provides precise moisture detection as small as 0.5 mm. The IP67 rating and gold-plated probes, tested for corrosion resistance, guarantee reliability even in harsh environments. The WLDC200 cable allows wide-range monitoring and serial connection, allowing flexible installation without length restrictions. It is an ideal solution not only for homes, but also industrial facilities.Smart notifications and compatibility with Smart Home systemsThe kit offers smart notifications via the eWeLink app, an audible alarm via ZigBee gateway, and email (for eWeLink Advanced subscribers). Leak information is sent every 10 minutes, eliminating the risk of missed alerts. The device works with popular smart home platforms such as Amazon Alexa, Google Home, SmartThings and IFTTT, providing full integration with your home management system.Full control and flexibilityThe WLDC200 cable is an indispensable accessory that allows you to monitor large areas and precisely inspect leak-prone areas. The ability to connect cables in series provides unlimited configuration possibilities, allowing you to fit the system into any space. Whether securing a bathroom, laundry room, kitchen or basement, the SONOFF SNZB-05P kit with WLDC200 cable guarantees maximum safety and peace of mind.The kit includesextension cablewater leakage sensorcable clamps x3instruction manual CableManufacturerSonoffModelWLDC200Compatible sensor modelsSNZB-05POperating temperature-10°C - 60°COperating humidity0-80%RHMaterialPC, ABSLength2 mWeight32 g SensorManufacturerSonoffModelSNZB-05PCommunication protocolZigBee 3.0Power supplyCR2477 3V battery (included)Battery lifeUp to 5 yearsDetection rangeWater level from 0.5 mmOperating temperature-10°C ~ 60°CWorking humidity0 ~ 100% RHHousing materialPC + ABSProduct dimensions48 x 48 x 21.6 mmNet weight45 gCommunication range130 m (in open space)Support for Home AssistantYes (integration via ZHA or Zigbee2MQTT)Supported ZigBee gatewaysiHost, ZBDongle-P/E, NSPanelPro, AeoTec Smart Home Hub V3, SmartThings Hub V3, ZBBridge-U/PCompatibility with platformsAmazon Alexa, Google Home, SmartThings, IFTTTProtection classIP67 (waterproof and dustproof)NotificationseWeLink app (push), audio alert via ZigBee gateway, email notifications (requires subscription to eWeLink app)

Compact and powerful The Xiaomi Smart Temperature and Humidity Monitor 3 Mini features a compact design with a 5.1mm thin bezel and a 42.8 × 35.1mm LCD screen. The high screen-to-body ratio provides a larger display area, making it easier to view temperature and humidity levels for a more intuitive and comfortable experience. High-precision sensor accurately detects changes in temperature and humidity The built-in high-precision digital sensor quickly and accurately detects even slight changes in temperature and humidity. The display shows temperature shifts as small as 0.1°C and humidity variations of 1%RH, helping you make timely adjustments to maintain a healthy environment for your family. Displays temperature and humidity simultaneously for better family health management The dual temperature and humidity display updates every 6 seconds, detecting changes in real time to provide attentive care for you and your family. Ultra-low power consumption and long-lasting battery life The Xiaomi Smart Temperature and Humidity Monitor 3 Mini is powered by a CR2450 button cell boasting extremely low power consumption to provide long-lasting protection for your family. Pair with a Bluetooth Mesh gateway to unlock smarter healthy living Connect to the Xiaomi Home app to experience a smarter, healthier lifestyle. Automatically turns on the tower fan when the weather is hot Configure preset temperatures in the Xiaomi Home app to turn on and off the tower fan automatically. Automatically turns on the humidifier when the air is dry Configure preset humidities in the Xiaomi Home app to turn on and off the humidifier automatically. Monitor temperature and humidity fluctuations with historical data tracking The Xiaomi Smart Temperature and Humidity Monitor 3 Mini stores temperature and humidity data. You can synchronise the data to the cloud via the Xiaomi Home app and a Bluetooth Mesh gateway. View temperature and humidity graphs in the app to track changes and protect your family's health. Stand or wall mount place it your way The Xiaomi Smart Temperature and Humidity Monitor 3 Mini is lightweight and portable, with a stand and double-sided wall adhesive for easy mounting or freestanding use. Slip it into your pocket or bag to monitor temperature and humidity anytime, anywhereat home, in the office, or while traveling. It's designed to ensure your comfort wherever you are. Cute faces Comfort level reminders Cute facial expressions update you on the comfort level of your surroundings, with temperature and humidity clearly displayed at all times.

Lihtne seadistamine teie mugavuse tagamiseks; Aktiveerige hääljuhtimine; Kontrollige, millal ja kus iganes olete

Temperature and humidity sensor Sonoff THS01, RJ11Sonoff SI7021 can be used with TH Elite and TH Origin to detect and measure temperature and humidity. It is distinguished by its high build quality, ultra-fast response, and the humidity measurement range is 0 to 100% RH. The device also guarantees immunity to interference. The cable length is 50 cm, and the operating temperature is -40°C~ +85°C. In addition, the sensor connector has been upgraded to RJ11, supporting hot plug, making the connection more stable and reliable.ManufacturerSonoffModelTHS01ColorblackCable length50 cmConnector typeRJ11 4P4CWorking temperature-40°C~ +85°CHumidity measurement range0-100% RH

Kompaktne ja võimas T30 WiFi Smart Plug pistik võimaldab teil oma seadmeid kaugelt sisse või välja lülitada. Samuti saab neid seadistada töötama ajakava alusel, muutes lõppkokkuvõttes oma tavalised seadmed nutikaks. [embed]https://www.youtube.com/watch?v=kV-XYA9qJRg[/embed] Voolutarbimise statistika (CS-T31-16B-EU) Kaugjuhtimine mobiilirakendusest Juhtige seadmeid ükskõik kus kohast 750°C leegikindlus 2,4 Ghz Wi-Fi tugi Energiasäästlik Ajastamine & Taimer Hääljuhtimine* *Hääljuhtimine Google Assistant & Alexa kaudu

Netatmo Weather Station for SmartphoneNetatmo weather station for SmartphoneThe weather station for SmartphoneYour indoor comfortUse indoor temperature, relative humidity and CO2 readings to live in a healthier home.Indoor temperatureIndoor humidityIndoor air qualityCO²Sound meterAir out your home when you need toWe spend 80% of our time indoors, yet the air indoors is often more polluted than outdoors.The Netatmo Weather Station measures the level of CO2 indoors and sends you a warning when you need to air out your home.Plan your outdoor activitiesUse real-time weather readings to dress comfortably, select the most appropriate transportation and plan your leisure activities.outdoor temperatureoutdoor relative humidityoutdoor qir qualitybarometic pressureweatherAnalyze the past, observe the present, forecast the futureUse the App to display all data in the form of graphs and get an idea of your environment seamlessly over time.Observe the cycles and forecast variations around you.Simple, ergonomic and user-friendly designAn elegant design made to last.A solid aluminum case.Compatibility:Apple:iPhone 6 PlusiPhone 6iPhone 5siPhone 5ciPhone 5iPhone 4siPhone 4iPad miniiPad (4th generation)iPad (3rd generation)iPad 2iPod touch (5th Generation)Android:Android 4.0 minimum required with access to Google PlayWindows PhoneWindows Phone 8.0 minimum required Type Control Unit System WLAN Max. Range (m) 100 Radio Frequency (MHz) 2,4 GHz Messbereich Innentemperatur (°C) 0 ... +50 Accurate Indoor Temperature (°C) +/- 0,3 Messbereich Außentemperatur (°C) -40 ... +65 Accuracy Outside Temperature +/- 0,3 Humidity Measurement (rel. H. in %) 0 - 100 Humidity Accuracy (rel. H. in %) +/- 3 Messbereich CO2-Gehalt (ppm) 0 - 5000 Accuracy CO2 Content (ppm) 50 Messbereich Luftdruck (mbar) 260 - 1160 Accuracy Air Pressure (mbar) +/- 1 Messbereich Lautstärke (dB) 35 - 120 Energy Supply Battery Type of Battery / Rechargeable Battery AAA Micro Required Number of Batteries 2 Operating Range Indoors/Ou

DIN relay with energy measurement Shelly Qubino Wave Pro Shutter

Shelly Plug S MTR Gen3 smart outlet (black)The Shelly Plug S MTR Gen3 smart outlet allows you to remotely control lighting, heating and other home appliances while monitoring energy consumption in real time. With support for the latest Matter standard, the device integrates with leading smart home ecosystems, including Apple HomeKit. As a result, you can manage your equipment using the Apple Home app or voice commands. A multi-color LED indicator provides intuitive operation, while a scripting function and 8MB flash memory allow for advanced configuration and personalization. The Shelly Plug S Gen3 will become the command center of your smart home, allowing you to increase convenience, save energy and gain full control of your devices wherever you are.Easy installation and wide compatibilityInstallation of the Shelly Plug S Gen3 is quick and easy - no additional hubs are required, just a Wi-Fi connection. With support for Matter, the socket easily integrates with other smart home devices, regardless of manufacturer. It also supports Apple HomeKit, which means you can control your devices using Siri or the Home app. What's more, thanks to its broad compatibility with home automation apps and its ability to work as a Wi-Fi signal booster, the Shelly Plug S Gen3 outlet becomes the centerpiece of your smart home. You can easily connect it with other devices, creating a cohesive ecosystem that makes everyday life easier.Real-time energy monitoringShelly Plug S Gen3 offers precise monitoring of the energy consumption of connected devices. So you can enjoy full control over your power consumption, which helps you effectively manage your energy consumption and identify the most energy-intensive appliances in your home.Multi-color LED indicatorThe LED indicator on the Shelly Plug S Gen3 serves an informative function, indicating with different colors the operating status of the device, such as whether it is on, off, or consuming power. Night mode automatically reduces the brightness of the indicator so as not to disturb the user's peace and comfort. This way, even when the outlet is active, its light will not be too intense.Bluetooth gatewayThe device also acts as a Bluetooth (BLE) gateway, allowing for even easier integration with other devices in the home. The ability to communicate with various devices makes the smart home more efficient and consistent.Automatic schedules and smart scenesWith the Shelly Plug S Gen3, you can create schedules and scenes to tailor the operation of your appliances to your daily life. Determine when your appliances should turn on or off, for example, according to your daily schedule, to enjoy convenience and optimize energy consumption. For example, you can program an outlet to automatically turn off forgotten appliances, such as an iron, after a certain time, or schedule the heater to turn on half an hour before you come home to enter a cozily warmed room.Safety of useSupport for appliances up to 2,500 watts and an IP20 rating ensure that the Shelly Plug S Gen3 outlet is efficient and safe to use. A special cover protects against accidental contact of children with electricity. ManufacturerShellyManufacturer codePlugSMTRgen3Dimensions44 x 44 x 70 mmCompatible socketsCEE 7/1, CEE 7/3 (Type F / Schuko) or CEE 7/5 (Type E)Compatible plugsCEE 7/2, CEE 7/4 (Type F / Schuko), CEE 7/7, CEE 7/16 (Type C) or CEE 7/17Operating temperature range-20°C to 40°CHumidity30% to 70% RHMax altitude2000 mDegree of contamination2Degree of protectionIP20Power supply220 - 230 V~ 50/60 HzMax. impulse voltage2500 VMax. switching voltage230 V~Max. switching current12 AMax. power2500 W (resistive)Wi-Fi protocol802.11 b/g/nRF bandwidth2401 - 2495 MHzMaximum RF power< 20 dBmRangeUp to 50 m outdoors, up to 30 m indoors (depending on local conditions)Bluetooth protocol4.2RF band2400 - 2483.5 MHzMaximum RF power< 4 dBmRangeUp to 30 m outdoors, up to 10 m indoors (depending on local conditions)

Matter over Thread Support for enriched smart homesThe U200 comes with Matter over Thread support, guaranteeing smooth compatibility across various smart home systems. This ensures effortless integration with a wide range of setups, potentially extending the lock's battery life to six months.Effortlessly secure belongings with automatic locking featureWith its integrated gyroscope, the U200 can remind you if the door is left ajar, ensuring your space stays secure. Plus, its advanced technology can seamlessly lock the door automatically once it's shut, adding an extra layer of convenience to your daily routine.Unlock your door silently with an innovative Quiet Unlock modeEffortlessly unlock your door with reduced noise levels, accompanied only by the gentle whir of the motor turning slowly, ensuring peace and tranquility.Supplementary and emergency unlocking options for enhanced accessibility and securityIn addition to its standard unlocking methods, the U200 presents supplementary and emergency options such as mechanical keys, personalized PIN codes, and dependable fingerprint recognition. Seamlessly integrated with the Aqara Home app and compatible with various third-party ecosystems, it ensures a comprehensive range of secure and convenient access solutions for users.Versatile Li-ion batteryThe lock is highly versatile and capable of running on rechargeable Li-ion batteries for enduring performance. The keypad supports AAA batteries and hard-wired powering, it ensures uninterrupted functionality. Enhanced security is provided with Tamper Alert functions. It excels even in extreme temperatures, ranging from -15–66 °C, and is designed for outdoor use with an IPX5 rating.Effortless setup with wide-ranging device compatibility for seamless integrationThe U200, engineered for effortless installation, seamlessly integrates over your current door lock, provided the cylinder features an Emergency Function*. This eliminates the necessity for inricate setups or door modifications, offering a convenient and straightforward method to enhance home security.*A locking cylinder equipped with this feature enables it to be unlocked from the outside using a key, even if another key is already on the inside. Secure access with convenient, temporary password features for enhanced flexibilityThe U200 ensures secure access with a range of temporary password options, including Offline Passwords (One-Time Passwords) and Periodic Passwords, offering flexible and convenient access control solutions.Installation requirements For Euro Mortise locks. Supports Euro profile and select Scandi cylinders. Please ensure your cylinder is equipped with an Emergency Function*. For US Deadbolt locks. Suitable for single-cylinder deadbolt locks. Supports backsets of 2-3/8" (60mm) and 2-3/4" (70mm). PH1 screwdriver is needed for installation. * A locking cylinder equipped with this feature enables it to be unlocked from the outside using a key, even if another key is already on the inside. The U200 is specifically designed for compatibility with cylinders that offer this capability.

Aeotec nutikodu moodul TriSensor 8, Z-Wave 800 Series, valge

Shelly Qubino Wave Pro 3 Z-Wave 3 channel DIN rail relayThe Shelly Wave Pro 3 is a 3-channel DIN-rail mounted relay that supports up to 48 amps and is designed for professional and commercial applications. With Z-Wave and Z-Wave Long Range technology, it offers a range of up to 1 km, enabling reliable operation even in large buildings. It supports control of 3 independent circuits via potential-free contacts, making it compatible with a wide range of voltages and devices. It also enables scheduling, scenes and automation - all remotely via a compatible Z-Wave gateway. The device is energy efficient and great for residential, hotel, office and industrial installations.Three independent channelsThe Shelly Wave Pro 3 relay offers three relay outputs - each with a maximum load of 16 A. The device can therefore handle 48 A, allowing independent control of lighting, heating systems or other high-power equipment within a single installation. This makes it easy to integrate different circuits in a single location without the need for additional modules.Range of up to 1 kmThe device works both in a standard Z-Wave mesh network and in a Z-Wave Long Range network. In Long Range mode, the range can be up to 1,000 meters in a straight line, eliminating the need for repeaters in large facilities. In mesh mode, the device can also act as a repeater, extending the range of the Z-Wave network.Remote control and automationWith support for schedules, smart scenes and integration with other Z-Wave devices, you can customize the relay's operation according to your daily routine or outdoor conditions, such as sunrise and sunset. In this way, you will reduce your electricity bill. In addition, SmartStart makes it easy to add the device to the network by scanning a QR code - no manual configuration required.Work with different types of loadsThanks to potential-free contacts, Shelly Wave Pro 3 can control both resistive loads (e.g. heaters), capacitive loads (e.g. electronic devices) and inductive loads (e.g. air conditioners, refrigerators), as long as they are equipped with an RC (snubber) circuit. This allows the device to be widely used in industrial, hotel or office installations.Low power consumption and protectionThe relay consumes less than 0.3 watts, making it one of the more energy-efficient options available on the market. Overheat protection automatically shuts down the device if the temperature exceeds 80°C and sends a notification to the gateway, ensuring the safety of the installation.DIN-rail installationThe compact housing (96 × 53 × 59 mm) and ability to be mounted on a standard DIN rail allows for easy integration into existing switchboards. The product complies with global DIN standardization, which simplifies the design and installation process in professional environments.High compatibility and securityShelly Wave Pro 3 works with all certified Z-Wave gateways and supports S2, S2 Authenticated and S0 security standards. It also offers OTA (Over-The-Air) updates, allowing for ongoing software maintenance without dismantling the device. ManufacturerShellyModelWavePro3Power supply110-240 V AC, 50/60 HzPower consumption< 0,3 WPower measurementNoMaximum AC switching voltage240 VMaximum AC switching current16 A per channel, 48 A totalMaximum DC switching voltage30 VMaximum DC switching current16 A per channel, 48 A totalProtection against overheatingYesRange - Long Range networkUp to 80 m indoors, up to 1000 m outdoorsZ-Wave repeater (Long Range)NoZ-Wave frequency (Long Range)864.0 MHzRange - Mesh networkUp to 40 m insideZ-Wave repeater (Mesh)YesZ-Wave frequency (Mesh)868.4 MHzProcessorZ-Wave S800RF transmitter power< 25 mWDimensions96×53×59 ± 0.5 mmWeight150 gMountingDIN railMaximum terminal torque0,4 NmCross section of wires0.5-2.5 mm² (20-14 AWG, green terminal)Wire stripping length6-7 mmHousing materialPlasticColorBlackWorking temperatureFrom -20°C to 40°CHumidity30-70% RHMaximum installation altitude2000 m above sea level.

Fibaro Walli seeria lülitid ja väljundid kasutavad Z-Wave tehnoloogiat. Nende elegantsete ja nutikate seadmetega saad luua iseenda targa kodu. Lülitid ja väljundid ühinevad teiste Fibaro süsteemi seadmetega. • Vali endale sobiv LED valgusti värv, mis sobib just Sinu kodu sisedisainiga • Vastupidav konstruktsioon ja nutikad võimalused • LED valgustus annab ülevaate toimuvast

Kasa Smart Thermostatic Radiator Valve Geofencing for Free - Your home heats up automatically as you approach and turns off when you're away. Smart Schedule - Set heating schedules based on your daily routines to make heating more efficient. Remote Control - Control all your radiators in your home from your phone. No more guessing if you left the heater on in an empty room. Voice Control - Hands-free control that syncs with Amazon Alexa, Google Assistant, or Siri ShortCuts. External Temperature Sensor - Pair with external temp sensor to gather accurate temperature readings (no additional hub and app required) Open Window Detection - Automatically turns off the heating and activates Frost Protection when the connected window & door sensor (Tapo T110) is triggered. Ultra-Long Standby - Works with lot hub, promising longer battery life (over one year). Up to 32 Radiators – Each hub can connect and manage up to 32 radiators. Versatile Compatibility – Fits on most radiator valve body thread (M30x1.5) and the six adapters(RA, RAV, RAVL, CAL, M28 and GIA) included allow more compatibility. Frost Protection - Keep your pipes unfrozen and your house safe. Hub Required - Kasa Hub KH100 is required for all smart features.

Sonoff nutilüliti Smart Switch THR316D

EcoFlow solar trackerGet even more energy from the sun. The EcoFlow 2-axis tracker automatically follows the sun so that your photovoltaic panels can always be positioned at the optimal angle. Sturdy and resistant to damage, it has 4 legs to ensure its stability. The product is compatible with most solar panels equipped with MC4 connectors. Automatically tracks the position of the sunThe EcoFlow solar tracker rotates on 2 axes to constantly position the photovoltaic panel placed on it perfectly towards the sun and at the optimum angle. This way you get even more energy. You don't have to adjust your panels yourself anymore - the EcoFlow tracker will do it for you! Leave it outside overnight and it will automatically follow the sun first thing in the morning. Clever designThe EcoFlow solar tracker will serve you well for a long time. It is extremely durable and solid. It has been equipped with 4 folding legs which make it possible to set it steadily on a chosen surface. You do not have to worry that it will tip over! Moreover, the upper bracket of the tracker can be adjusted, so you can easily adjust it to your solar panel. Even more solar power for youOptimize the performance of your panels. How is this possible? By using the EcoFlow tracker, you can draw up to 30% more watts of solar energy than panels laid flat. It's an eco-friendly, yet cost-effective solution that will allow you to get more power from the sun and maybe even become independent from the grid. Say goodbye to high bills! Wide compatibilityForget about compatibility problems. On the EcoFlow solar tracker you can easily mount any photovoltaic panel - not only EcoFlow brand, but also other manufacturers. The only requirements are that the panel is equipped with MC4 connector and it is not too big or too heavy. The maximum allowable panel weight is 25kg and the dimensions are 2.4x1.1m. Opt for modern solutions and take advantage of solar energy! Specification BrandEcoFlowNameSolar TrackerWeight25kgDimensions2.5x1.5x1.5m (min. 2.5x1.1x1.1m)Max. load capacity25kgMax. solar panel dimensions2.4x1.1mPitch axis range0-85°Yaw axis range0-345°AppSupportedSystems supportediOS, AndroidBattery Capacity5000mAhCell TypeNCMShelf lifeUp to 1 year (after a full charge)Battery lifeUp to 500 cycles (up to 80% capacity)Operating temperature-10°C-40°C (optimum temperature: 25°C)Water resistanceIP54Wind resistanceUp to 50km/h (strong wind)

GPS-jälgimisseade elektrisõidukitele

Yale Home Intelligent alarm starter kit +

Carbon monoxide sensor with K10LLDCO display equipped with a Kidde electrochemical sensor, guaranteeing 10 years of operation. Powered by a built-in battery that does not require replacement for the lifetime of the device. This solution allows the detector to be mounted in an optimal place in the room and provides protection also in the event of a power failure in the network. The built-in LCD display shows the concentration level of carbon monoxide in the range from 0 to 999 PPM. CO concentration measurements are performed every second. Exceeding the permissible CO level is signaled optically (red LED) and acoustically (loud, pulsating sound alarm with a strength of 85dB). The sensor has a test / reset button that allows you to check the device's operation and turn off the alarm signaling, as well as a button, when pressed, which displays the highest detected CO level stored in the sensor's memory. The sensor has the function of informing about the activation of the alarm in the last 14 days. Thanks to this, the user can make sure that there is no emission of carbon monoxide during his absence in the room. The efficiency control system monitors on an ongoing basis, among others: the sensor, internal circuits and the state of the battery. In the event of a malfunction or low battery level, the yellow LED blinks, the LCD panel displays the appropriate graphic information and an audible signal sounds. In addition, the sensor is equipped with a simulation test function that allows you to quickly check the correct response of the sensor to the CO test gas. Thanks to a specially designed housing, in addition to wall mounting, the sensor can also be placed on a flat surface, e.g. on a bedside table near the bed. It has a blockade that prevents disassembly of the device installed on the wall. After 10 years from the activation of the power supply, the sensor will remind you to replace the device. K10LLDCO is marked with the B building mark confirming compliance with the Polish standard PN-EN 50291-1: 2018 + AC 2021 for home carbon monoxide detectors. The research was carried out by the Scientific and Research Center for Fire Protection, National Research Institute. Józef Tuliszkowski (CNBOP-PIB). In addition, it has a BSI certificate confirming compliance with the requirements of BS EN 50291-1: 2018 issued by the British Standards Institution.

FIBARO FGWOE-011-08 Intelligentne gniazdko Walli Outlet antracyt

Matter ZigBee Bridge Ultra Gateway SONOFF ZBBridge-U (RJ45 LAN, 1.5 GHz, 1 GB RAM, 8 GB)SONOFF ZBBridge-U is an advanced Zigbee gateway that connects Zigbee devices to the Matter ecosystem, enabling integration with popular smart home platforms such as Apple Home, Google Home, Amazon Alexa and SmartThings. This allows you to control all your devices from a single app or with voice assistants. The product allows you to connect as many as 256 devices and features a range of up to 200 meters.Performance at the highest levelThe gateway is equipped with a processor clocked at 1.5 GHz, 1 GB of DDR4 memory and 8 GB of eMMC internal memory. This ensures smooth processing and reliable execution of even the most advanced automation scenarios! It can also easily support up to 256 devices. In addition to Wi-Fi connectivity, the gateway offers an RJ45 Ethernet port, which guarantees a stable and fast network connection. As a result, your smart home devices will work without delays, and automations will be implemented instantly.Integration with the Matter ecosystemZBBridge-U enables Zigbee devices to integrate with the Matter ecosystem, allowing them to work with various smart home platforms. This allows you to control your devices with Siri, Google Assistant or Amazon Alexa, creating a cohesive and integrated smart home system.For the sake of securityThe gateway also acts as a security control panel, allowing you to create alarm scenarios. By integrating with sensors and other Zigbee devices, you can create advanced automations that make you feel safer in your home. This way, for example, you'll make it so that when the sensor detects that a stranger has entered the room, ZBBridge-U will beep and send you a notification to your phone!Compatibility with SONOFF devicesThe ZBBridge-U is compatible with a wide range of SONOFF Zigbee devices, allowing you to easily expand your smart home system with new features. Among other things, it is compatible with a variety of switches, smart outlets and sensors. So you can customize your smart home according to your needs and preferences!Enjoy more comfortCreate complex automations and enjoy comfort in your smart home. By combining the gateway with sensors and other devices, you can plan multiple scenarios for different occasions! Make it so that when the temperature in the room rises to a certain level, the fan will automatically start up, and when someone leaves the room, the lights will spontaneously turn off. The possibilities are almost endless!Voice controlDo you have busy hands? No problem - the ZBBridge-U gateway is compatible with Alexa, Siri and Google Assistant, allowing you to control your devices with voice commands! With just a few words, for example, you can turn off the lights, run the thermostat or make sure the door is locked.IncludedZigbee gatewayNetwork cable (1m)Quick start guideUSB-C cable (1 m) ManufacturerSONOFFModelZBBridge-UNetwork interfaceRJ45 (10 / 100 Mbps)Power interfaceUSB-CPower supply5 V - 1 AConnectionWi-Fi / EthernetWireless connectivityWi-Fi IEEE 802.11 b/g/n 2.4 GHz, Zigbee 3.0Operating temperatureFrom -10°C to 40°COperating ambient humidity5-95% RH, no condensationMaterialPC + ABSChipEFR32MG21 + RV1109Processor1.5 GHz Dual-coreDDR4 memory1 GBeMMC memory8 GBMax. number of connected devices256CompatibilityApple Home, Amazon Alexa, Google Home, SmartThings

Yeelight

EU868 Relay Set of 2 for Gen.3/4 Shelly LoRa Add-onExtend the capabilities of your automation with the Shelly LoRa Add-on Relay EU868, a compact yet extremely powerful module that provides reliable communication over distances of up to 5 km. Using LoRa technology and an external antenna, the device guarantees a stable connection even in hard-to-reach places. It supports selected Shelly Gen3 and Gen4 devices (after upgrading to 1.6 software) and allows the use of custom scripts tailored to specific applications. It's the perfect solution for smart management of urban infrastructure, precision agriculture or remote industrial facilities. You'll find two pieces of relays included.Range you can count onThe Shelly LoRa Add-on relay operates in the EU868 band and provides communication over a distance of up to 5 km. That's much more than traditional automation systems offer. Thanks to LoRa (Long Range) technology, the device excels where other technologies fail - in buildings, industrial zones, basements or vast agricultural areas. It's an indispensable choice in areas with limited Internet or Wi-Fi access. Note that at least two units are needed for full operation (one relay for transmitting the signal, the other for receiving).Full integration with Shelly Gen3 and Gen4The device is designed to work seamlessly with selected third- and fourth-generation Shelly devices. Simply upgrade to software version 1.6 to enjoy full compatibility. Installation is quick and intuitive, so it only takes a few moments to get the relay up and running.Flexibility and customization to suit your needsShelly LoRa Add-on is not only about performance, but also about freedom of configuration. Support for scripting allows you to create your own operating scenarios tailored to your specific application - whether it's controlling street lights, monitoring remote facilities, managing parking lots, or controlling irrigation systems. This is a device that will work great in almost any scenario.Work even in harsh conditionsWhether the device is operating in a warehouse, in a field or in a sparsely populated area, the LoRa relay from Shelly guarantees uninterrupted operation and reliable data transmission. It's ideal for automating tasks in demanding environments - without the need for extensive network infrastructure.Management always at handShelly Smart Control is a free app that allows you to conveniently manage devices, monitor energy consumption and analyze costs. Available for Android, iOS and the Shelly Cloud, it offers an intuitive interface, with even more advanced features in the premium version. ManufacturerShellyModelLoRaAdd-onDimensions40 x 42 x 11 mmWeight10gMounting methodThrough Shelly's proprietary serial interface to connect to a Shelly-compatible deviceHousing materialPlasticColorBlackOperating temperature-20 °C to 40 °CMaximum altitude2000 mPower supply3.3 V (from a compatible Shelly device)Power consumption< 150 mWCompatible devicesShelly 1 Gen3, Shelly 1PM Gen3, Shelly 2PM Gen3, Shelly EM Gen3, Shelly Dimmer 0/1-10V PM Gen3, Shelly DALI Dimmer Gen3, Shelly 1 Gen4, Shelly 1PM Gen4, Shelly 2PM Gen4LoRa RF bandEU868 (US915 and AU915-928 supported soon)Maximum RF LoRa power< 14 dBmLoRa rangeUp to 5000m (depending on conditions)Number of pieces included2

Verbatim - My Finder Bluetooth Tracker, Black (1-pack)

Mili MiTag Lokaator iOs. must

1-channel WiFi switch module with voltage-free contact Avatto WSM16-DC32V-1The 1-channel WiFi switch module with voltage-free contact Avatto WSM16-DC32V-1 is a solution that allows you to remotely control lighting or other low-voltage devices. Thanks to Wi-Fi communication, you can manage circuits from anywhere - all you need is a smartphone with the Smart Life or AVATTO app. The module works with Amazon Alexa and Google Assistant voice assistants, allowing you to conveniently turn on and off equipment by voice.Easy installation and wide applicationThe compact size (39 × 39 × 19.4 mm) makes the Avatto WSM16-DC32V-1 fit easily into an installation box, appliance enclosure or control cabinet. The model is designed to operate in DC 12-32 V systems, making it ideal for gate automation, alarm systems, LED lighting control, electric locks or electronic devices. With a simple wiring diagram and compatibility with various switch layouts, installation is quick and hassle-free.Stability and safe operationThe device supports the manual override function, allowing you to physically turn a circuit on or off even if the network connection is lost. The last settings are stored in memory, guaranteeing stable operation when power is restored. The module is IP20 rated and CE and RoHS certified, confirming high safety standards and compliance with European standards.Automation and smart scenariosWith the Smart Life / AVATTO app, you can create operating schedules, automatic scenes and share control with other users. The module connects to a 2.4 GHz Wi-Fi network using the IEEE 802.11 b/g/n standard, ensuring smooth operation and fast response time. With its help you will automate lighting, watering system, ventilation or other elements of your smart home, gaining more comfort and control over energy.Included1-channel WiFi switch module with voltage-free contact Avatto WSM16-DC32V-1Mounting bracketUser manual ManufacturerAvattoModelWSM16-DC32V-1Device type1-channel WiFi switch module (voltage free DC contact)Supply voltageDC 12-32 VMaximum load5 ATransmission frequency2.412-2.484 GHzCommunication protocolWi-Fi IEEE 802.11 b/g/nOperating range< 100 mDimensions39 × 39 × 19.4 mmDegree of protectionIP20Operating time>100,000 cyclesCertificationsCE, RoHS

Unique design and exceptional technology; Stable connection via Z-Wave protocol; Smooth cooperation with other devices of the FIBARO system; Select the colour of the LED ring to make it fit your personal interior preferences.

Aqara Touchscreen Dial V1 EU on nutikas lüliti, mis ühendab endas LCD-ekraaniga puutetundliku juhtimise, kohandatavad seadistused ja laia ühilduvuse Matter ja Zigbee 3.0 ökosüsteemidega. See pakub intuitiivset seadmekontrolli, energiajälgimist ja nutikaid automaatika võimalusi. • 2,08’’ LCD-ekraan kohandatavate ikoonide ja värvidega • Toetab Matter ja Zigbee 3.0 ühenduvust • Juhtmevabad ja juhtmega lülitid seadmete ja stseenide haldamiseks • Energiakasutuse jälgimine ja analüüs

The Aeon Labs Heavy Duty Switch is used for wireless control, automate and record the power consumption of heavy loads up to 40 amps. The switch can be controlled remotely through the Z-Wave network. The integrated energy consumption measurement function provides how much energy the connected device use. So you can identify the energy eater in your Smart Home.

IP Rating: IP10

FIBARO Home Center 3 Lite on kõige kaasaegseim ja mitmekülgseim koduautomaatika juhtseade. 10 aastase kogemuse järel on turule toodud kontroller, mis on suuteline juhtima Sinu kodus peaaaegu kõike. Sisse-ehitatud erinevad juhtmevabad protokollid teevad Home Center 3 Lite-st ühe paindlikuma seadme koduautomaatika turul.

Shelly wall switch 4 buttons (black) Shelly WS 4 is a modern device designed for smart home systems. What's more, the switch features a contemporary design that blends in perfectly with a variety of interiors. Its compact size and simple wiring make it easy to install in existing wall switch consoles, eliminating the need to make any changes to the house wiring. Thoughtful design This sleek switch is designed for maximum comfort. Equipped with 4 functional buttons, it allows advanced management of smart relays. With it, you can activate different scenes, control lighting, operate dimmers and control blinds. This is a solution that allows you to significantly simplify your daily life, while providing an elegant appearance and convenience of use. Included wall switch1 x module mounting bracket2 x mounting screwsinstruction manual ManufacturerShellyModelWallswitch4WhiteColorblackNumber of buttons4

Discover the convenience and safety of the Gembird smart power strip, a versatile addition to any smart home. This innovative power distribution device is designed to seamlessly integrate with your existing smart home setup, offering Wi-Fi connectivity and compatibility with the Smart Life app. Control your devices remotely or with your voice, thanks to compatibility with both Alexa and Google Assistant.Safety is a priority with this smart power strip, featuring thermal protection and compliance with ISO 9002, RoHS, and WEEE standards, ensuring a reliable power supply to your devices. It also offers flexible power solutions with 4 managed outputs, including USB Type-A and USB-C ports, catering to a wide range of charging needs.Maximize your home's energy efficiency with the built-in scheduler and remote control features, allowing you to manage your devices' power consumption effortlessly. Make your home smarter and safer with the Gembird smart power strip.

Protection against contact with water Sonoff IP66 is a high quality waterproof housing that protects the relay from contact with water. The waterproofness of the housing is IP66. Its application allows you to use intelligent switches e.g. in the garden to control outdoor lighting. The connectors can be equipped with a wire of 3-6.5 mm diameter. ModelIP66Dimensions132,2 x 68,7 x 50,1 mmWeight145 gMaterialOgnioodporny ABS V0Compatibility with Sonoff modelsBasic, RF / moduł PCBA Pow, TH10, TH16, Dual, G1Cable diameter3-6,5 mmDegree of protectionIP66

Sonoff nutilüliti Smart Switch THR320

Sonoff Smart 3-kanaliline WiFi seinalüliti must (M5-3C-86)

EcoFlow XT60i cable for photovoltaic panelsThe MC4 to XT60i cable will allow you to connect your photovoltaic panel to the EcoFlow portable power station. This allows you to enjoy free, environmentally friendly and widely available solar power wherever you go! The cable is compatible with DELTA and RIVER series stations and is 2.5m long.BrandEcoFlowCable type XT60iLength2.5mCompatibilityEcoFlow power stations of DELTA and RIVER series