WaterStop allows you to remotely shut off the water at a facility with an Ajax security system. The device combines a high-quality valve and a powerful electric actuator with a control unit connected to an Ajax hub via the Jeweller encrypted radio protocol. You can control WaterStop from anywhere in the world. Check the device status and change the valve position at any moment — all you need is an Internet connection and the Ajax app. If LeaksProtect or a third-party water leak detector is triggered, WaterStop will automatically shut off the water in 5 seconds. At the same time, all Ajax users and the security company receive a notification about the alarm and scenario activation. In addition to the water leak alarm scenario, it is possible to set the water shut-off at a specific time or when the security system is armed.
WaterStop allows you to remotely shut off the water at a facility with an Ajax security system. The device combines a high-quality valve and a powerful electric actuator with a control unit connected to an Ajax hub via the Jeweller encrypted radio protocol. You can control WaterStop from anywhere in the world. Check the device status and change the valve position at any moment — all you need is an Internet connection and the Ajax app. If LeaksProtect or a third-party water leak detector is triggered, WaterStop will automatically shut off the water in 5 seconds. At the same time, all Ajax users and the security company receive a notification about the alarm and scenario activation. In addition to the water leak alarm scenario, it is possible to set the water shut-off at a specific time or when the security system is armed.
SwitchBot Water Leak Detector with wire.Is water leaking from your washing machine? Is the sink dripping? Or are you afraid something will flood your bathroom while you're on vacation? SwitchBot Water Leak Detector is a small, clever device that detects leaks and lets you know right away - wherever you are. No need for a hub, no complicated installation. You plug it in, put it where water might appear, and have peace of mind. And when something happens - you get a notification straight to your phone and can act right away. W4402010 is a version with a practical cable that you can use to measure the water level.Detects drips, leaks and floodingThe sensor is equipped with precise sensors that respond to different scenarios - from single drops to a small leak to flooding. This allows you to detect the problem earlier and avoid costly damage. It will be perfect for the washing machine, dishwasher, under the sink or in the basement.No hub, no hassle - ready right out of the boxThe sensor works via Wi-Fi and Bluetooth, so you don't need any additional devices. Just connect it to the SwitchBot app and it's up and running. The Wi-Fi range reaches up to 120 meters in an open area, so you can easily cover the whole house or apartment.Real-time notificationsAs soon as the sensor detects water, it sends you an alert via the app, email, and can also trigger an audible alarm or notify you via Alexa. So you have four independent ways to be alerted. Whether you're at work, shopping or on vacation, you'll know right away that something is going on.IP67-rated water resistanceThe immersion- and moisture-resistant housing makes the sensor suitable for all conditions - in the bathroom, kitchen, laundry room or boiler room. And thanks to its robust construction, you don't have to worry about its durability. The battery power supply lasts up to 2 years. The lack of wires means you can put it exactly where you'll need it most, without wondering where the outlet is.Works with the entire SwitchBot ecosystemIf you use other SwitchBot devices, the sensor can easily integrate with them. For example: when it detects a leak, it can automatically turn off the power, turn on the camera or notify you by voice through the Alexa speaker. It also supports Google, Siri, SmartThings and IFTTT, so you'll fit it into your smart home. ManufacturerSwitchBot Water Leak DetectorManufacturer codeW4402010Type of detectionDripping, leaking, flooding (real-time monitoring)ConnectivityBluetooth and Wi-Fi (2.4 GHz)RangeUp to 120 m in open spaceNotificationsAudio, app, email, Alexa integrationWaterproofIP67 (immersion and moisture resistance)Power supplyBattery (up to 2 years of operation)Requires a hubNoCompatibilityAlexa, Google Assistant, Siri, IFTTT, SmartThingsIntegration with other devicesYes (SwitchBot Ecosystem)
SwitchBot Water Leak DetectorIs water leaking from your washing machine? Is the sink dripping? Or are you afraid something will flood your bathroom while you're on vacation? SwitchBot Water Leak Detector is a small, clever device that detects leaks and lets you know right away - wherever you are. No need for a hub, no complicated installation. You plug it in, put it where water might appear, and have peace of mind. And when something happens - you get a notification straight to your phone and can act right away.Detects drips, leaks and floodingThe sensor is equipped with precise sensors that respond to different scenarios - from single drops to a small leak to flooding. This allows you to detect the problem earlier and avoid costly damage. It will be perfect for the washing machine, dishwasher, under the sink or in the basement.No hub, no hassle - ready right out of the boxThe sensor works via Wi-Fi and Bluetooth, so you don't need any additional devices. Just connect it to the SwitchBot app and it's up and running. The Wi-Fi range reaches up to 120 meters in an open area, so you can easily cover the whole house or apartment.Real-time notificationsAs soon as the sensor detects water, it sends you an alert via the app, email, and can also trigger an audible alarm or notify you via Alexa. So you have four independent ways to be alerted. Whether you're at work, shopping or on vacation, you'll know right away that something is going on.IP67-rated water resistanceThe immersion- and moisture-resistant housing makes the sensor suitable for all conditions - in the bathroom, kitchen, laundry room or boiler room. And thanks to its robust construction, you don't have to worry about its durability. The battery power supply lasts up to 2 years. The lack of wires means you can put it exactly where you'll need it most, without wondering where the outlet is.Works with the entire SwitchBot ecosystemIf you use other SwitchBot devices, the sensor can easily integrate with them. For example: when it detects a leak, it can automatically turn off the power, turn on the camera or notify you by voice through the Alexa speaker. It also supports Google, Siri, SmartThings and IFTTT, so you'll fit it into your smart home. ManufacturerSwitchBot Water Leak DetectorManufacturer codeW4402000Type of detectionDripping, leaking, flooding (real-time monitoring)ConnectivityBluetooth and Wi-Fi (2.4 GHz)RangeUp to 120 m in open spaceNotificationsAudio, app, email, Alexa integrationWaterproofIP67 (immersion and moisture resistance)Power supplyBattery (up to 2 years of operation)Requires a hubNoCompatibilityAlexa, Google Assistant, Siri, IFTTT, SmartThingsIntegration with other devicesYes (SwitchBot Ecosystem)
Smart Bluetooth/Wi-Fi Gateway with Alarm Gosund G2Gosund G2 is a compact Bluetooth/Wi-Fi gateway that will facilitate managing your smart home. With it, you can conveniently control selected devices, such as a smart door lock. The product is compatible with Amazon Alexa and Google Assistant voice assistants, and it is equipped with small indicators that will provide you with information about its status.Convenient Control of Your DevicesThanks to this practical gateway, you can connect your devices to the network to gain the ability to conveniently operate them through an app. The G2 model stands out with a range of approximately 10 meters and is compatible, among other things, with smart locks. With its help, you can, for example, remotely unlock doors.Compatibility with Voice AssistantsNow you can conveniently operate your smart devices, even when you don't have your smartphone with the app on hand. The Gosund gateway is compatible with Google Assistant and Amazon Alexa, allowing you to control paired devices using voice commands. See for yourself that just a few words are enough to, for example, unlock the door lock in the living room!Key Information at Your FingertipsThe gateway is equipped with special LED indicators that allow you to check its status at any time. Just take a quick look! Blue indicates pairing mode, red indicates a network error, and blue and red together indicate operational mode.In the boxBluetooth gatewayShort user manualBrandGosundModelG2ConnectivityBluetooth 4.2 / IEEE802.3 11n/g/b Wi-FiFrequency2.4 GHzPower SupplyUSB DC 5 V 1 AOperating TemperatureFrom 0°C to 50°COperating Environment Humidity Level10%-85% RHStorage TemperatureFrom 0°C to 70°CStorage Environment Humidity Level5%-95% RHWeight100 gDimensions50 x 50 x 11 mm
X-Sense SDS0A sensorThe X-Sense SDS0A sensor is a reliable security tool that works with the SBS50 base station. With this combination, you can easily and conveniently build a smart security system in your home. You can install the sensor on doors or windows, and get even more functions with the intuitive X-Sense Home Security app. Bet on precision and choose the SDS0A model today!Intuitive appX-Sense SDS0A, combined with the SBS50 base station, is your guarantee of a safe home every day. With the intuitive X-Sense Home Security app, you'll get access to features such as instant notifications of a variety of dangers, such as open doors and windows. When a threat is detected, the base station sounds an alarm at a customizable time interval (from 20 seconds to 10 minutes), with push notifications in the app. In addition, you can choose your schedule, managing security modes, so you achieve full control over your device.Wide range and compatibilityThe device offers a range of up to 500 meters in open spaces, making it perfect for multi-family homes, offices or larger buildings. The sensor will adequately adapt to a variety of door and window types, being an ideal choice for any user. You can easily install it in the desired location without the need for tools - the sensor is mounted with double-sided tape.Long life and reliabilityThe system offers two modes (Home or Away Home), sending notifications to your phone. Using the app, you can create your own schedule for both modes, so they will change automatically according to the hours you set. In addition, you will find a replaceable AAA battery included, which ensures a long life for the device. For added security, it is recommended to equip your local Wi-Fi router and SBS50 base station with an uninterruptible power supply (UPS). ManufacturerX-SenseModelSDS0ABattery typeReplacement AAABattery life>2 yearsColorWhiteCertificationsCE REDDimensions54x35x18 mmIndicatorBuilt-inCompatibilityBase SBS50Power sourceBatteryWeight47 gDedicated applicationX-Sense Home Security
Shelly Qubino Wave Pro 3 Z-Wave 3 channel DIN rail relayThe Shelly Wave Pro 3 is a 3-channel DIN-rail mounted relay that supports up to 48 amps and is designed for professional and commercial applications. With Z-Wave and Z-Wave Long Range technology, it offers a range of up to 1 km, enabling reliable operation even in large buildings. It supports control of 3 independent circuits via potential-free contacts, making it compatible with a wide range of voltages and devices. It also enables scheduling, scenes and automation - all remotely via a compatible Z-Wave gateway. The device is energy efficient and great for residential, hotel, office and industrial installations.Three independent channelsThe Shelly Wave Pro 3 relay offers three relay outputs - each with a maximum load of 16 A. The device can therefore handle 48 A, allowing independent control of lighting, heating systems or other high-power equipment within a single installation. This makes it easy to integrate different circuits in a single location without the need for additional modules.Range of up to 1 kmThe device works both in a standard Z-Wave mesh network and in a Z-Wave Long Range network. In Long Range mode, the range can be up to 1,000 meters in a straight line, eliminating the need for repeaters in large facilities. In mesh mode, the device can also act as a repeater, extending the range of the Z-Wave network.Remote control and automationWith support for schedules, smart scenes and integration with other Z-Wave devices, you can customize the relay's operation according to your daily routine or outdoor conditions, such as sunrise and sunset. In this way, you will reduce your electricity bill. In addition, SmartStart makes it easy to add the device to the network by scanning a QR code - no manual configuration required.Work with different types of loadsThanks to potential-free contacts, Shelly Wave Pro 3 can control both resistive loads (e.g. heaters), capacitive loads (e.g. electronic devices) and inductive loads (e.g. air conditioners, refrigerators), as long as they are equipped with an RC (snubber) circuit. This allows the device to be widely used in industrial, hotel or office installations.Low power consumption and protectionThe relay consumes less than 0.3 watts, making it one of the more energy-efficient options available on the market. Overheat protection automatically shuts down the device if the temperature exceeds 80°C and sends a notification to the gateway, ensuring the safety of the installation.DIN-rail installationThe compact housing (96 × 53 × 59 mm) and ability to be mounted on a standard DIN rail allows for easy integration into existing switchboards. The product complies with global DIN standardization, which simplifies the design and installation process in professional environments.High compatibility and securityShelly Wave Pro 3 works with all certified Z-Wave gateways and supports S2, S2 Authenticated and S0 security standards. It also offers OTA (Over-The-Air) updates, allowing for ongoing software maintenance without dismantling the device. ManufacturerShellyModelWavePro3Power supply110-240 V AC, 50/60 HzPower consumption< 0,3 WPower measurementNoMaximum AC switching voltage240 VMaximum AC switching current16 A per channel, 48 A totalMaximum DC switching voltage30 VMaximum DC switching current16 A per channel, 48 A totalProtection against overheatingYesRange - Long Range networkUp to 80 m indoors, up to 1000 m outdoorsZ-Wave repeater (Long Range)NoZ-Wave frequency (Long Range)864.0 MHzRange - Mesh networkUp to 40 m insideZ-Wave repeater (Mesh)YesZ-Wave frequency (Mesh)868.4 MHzProcessorZ-Wave S800RF transmitter power< 25 mWDimensions96×53×59 ± 0.5 mmWeight150 gMountingDIN railMaximum terminal torque0,4 NmCross section of wires0.5-2.5 mm² (20-14 AWG, green terminal)Wire stripping length6-7 mmHousing materialPlasticColorBlackWorking temperatureFrom -20°C to 40°CHumidity30-70% RHMaximum installation altitude2000 m above sea level.
