Tempered glass film TELESIN for DJI Osmo Action 4/3Protect the screens and lens of your camera from damage. Telesin OA-FLM-007 2.5D tempered glass will protect these elements of the device from scratches, greasy stains or fingerprints. The accessory is very easy to install and does not affect the comfort of the equipment - it allows comfortable touch operation and provides excellent image quality.Will protect your cameraTelesin's 2.5D tempered glass perfectly fits the screens and lens of your camera - it adheres perfectly to them, protecting them from dust and dirt. It will also protect them from scratches and other types of damage. In addition, thanks to a special coating, no fingerprints, smudges or greasy stains will be left on them. With OA-FLM-007 your camera is safe!Quick and easy installationInstallation of the accessory will not even cause you the slightest problem. Telesin's electrostatic tempered glass is extremely easy and quick to install - say goodbye to annoying, difficult to remove air bubbles! The kit also includes alcohol-soaked wipes and dust removal stickers to help you prepare your lens and screens for glass application.Comfortable handlingThe 2.5D tempered glass is very pleasant to the touch, which translates into comfortable use of the camera. It is also distinguished by a light transmission of 99%, so you can enjoy a clear, crisp image and faithfully reproduced colors. You also don't have to worry about lag or other problems with the device's operation. After the glass is applied, the screen still responds quickly and smoothly to touch.IncludedTempered glass for the lensTempered glass for the front screenTempered glass for the rear screenAlcohol-soaked wipesDust removal stickersManufacturerTelesinModelOA-FLM-007MaterialTempered glassFits toDJI Osmo Action 4/3
Asendamatu kaaslane Insta360 seikluskaameratele. Endlikepike on fotodel ja videotel automaatselt nähtamatu. Auto-removed in 360 shots to give you incredible third-person shots and impossible angles. Note: When this product is used with Ace Pro & Ace, users must purchase the Quick Release Mount or 3-Prong to 1/4" Adapter, sold separately. Super lightweight design makes it easy to carry for long periods. High strength materials enable stable use with Insta360 cameras. New, ultra-durable extension structure. For best stability, only extend the selfie stick to 2 sections (~70cm) with the ONE RS 1-Inch 360 Edition. When extending longer, please use discretion and assess the stability of the camera while shooting. Do not use long selfie sticks at high speeds or in action scenarios. Invisible Selfie Stick effect can only be achieved with 360 cameras. We recommend using the Selfie Stick Sleeve for a better shooting experience.
The ULANZI JJ01 Flexible Selfie Tripod features the Go Quick II System, magnetic mount, and strong suction, allowing you to easily connect devices in seconds without the need for screws. Additionally, it is equipped with a secondary reinforced locking pin for enhanced security during use. Reinforced legs enhance loading capacity; anti-slip rubber feet prevents your device from falling down. ULANZI JJ01 Flexible Selfie Tripod comes with a 360° Panoramic ball head, allowing for adjustment of the ideal angle to shot. Flexible legs can be adjusted to wrap around objects in various shooting scenarios. The ULANZI JJ01 Flexible Selfie Tripod includes a GoPro adapter and a universal 1/4" mount, making it compatible with various devices such as GoPro, DJI, Insta360, Sony RX100, and compact cameras. It also allows for easy connection with a phone holder. Folded Length (mm): 245mm Max Extened Length (mm): 264mm Weight (g): 252g
Charge up to 2 lithium-ion batteries simultaneously so your VIRB 360 is always powered and ready to capture your adventure. Includes a charger (1250 mAh) and a micro USB cable.
CAPTURE PRECISION. EXECUTE PERFECTION.The most essential data for ballistics calculations is projectile speed. A chronograph is the best tool for the job. Whether you’re handloading for the range or building arrows for the hunt, the Xero C1 Pro Chronograph provides the speed data you need to hone your craft.Measure projectile speeds from 100 fps to 5,000 fps.The button-operated design is simple to use.Pair with the ShotView™ smartphone app to track your shots, measure deviation and more.It’s built to endure the elements with an IPX7 water-resistant rating.The compact design fits in your back pocket and is easy to set up.With battery life for up to 2,000 shots or up to 6 hours, you’ll have plenty of time at the range.Hone your craft with precise data.RELIABLE PERFORMANCEThe chronograph will reliably pick up your shots, thanks to the sensitive and accurate sensor.VERSATILE PERFORMANCEThe device can measure projectile speeds from 100 fps to 5,000 fps for bullets, arrows, slugs, airsoft BBs, pellets and paintballs.EASY TO OPERATEIndoor and outdoor operation is simple, thanks to the backlit display and button-operated design.PURPOSE-BUILT APPKeep track of your shots, measure deviation and more when paired with the ShotView app on your compatible smartphone.SIMPLE SETUPTurn it on. Set it up. Point it in the direction of fire, and shoot.RECHARGEABLE BATTERYWith battery life for up to 2,000 shots or up to 6 hours, there’s no rush. Take your time at the range while you experiment and fine-tune your setup.SUPPRESSOR SUPPORTSince the unit isn’t triggered by muzzle blast, it picks up shots from suppressed firearms and firearms with muzzle brakes or compensators.BUILT TO ENDUREDesigned to last, thanks to an IPX7 water-resistant rating.ACCURATE BY DESIGNThere’s no need to attach anything to your firearm, which means it won’t affect your zero or barrel harmonics.
TELESIN silicone case with lens cover for Insta360 Ace Pro camcorderThe TELESIN Silicone Case with Lens Cover is the perfect solution for all Insta360 Ace Pro camcorder users who want to provide their equipment with extra protection from everyday damage. Made of high-quality, moldable silicone, this case effectively protects the camera from bumps, scratches and minor damage, while maintaining full access to all ports, buttons and displays. This is an essential accessory for anyone who wants to take care of their camera during heavy use.Protection from damage and comfort of useThe TELESIN case is made of flexible silicone, which perfectly adapts to the shape of the Insta360 Ace Pro camera, providing it with effective protection against bumps and scratches. The silicone coating not only absorbs shocks, but also provides a soft and comfortable feel to the touch, enhancing user comfort. The case is resistant to daily wear and tear, making it an excellent choice for active users.Maintaining full functionality of the cameraThe TELESIN case has been designed in such a way that it does not restrict access to any key features of the Insta360 Ace Pro camera. Thanks to precise cutouts, users can freely use all ports, buttons and displays without having to remove the case. This enables smooth operation of the camera even in harsh environments, while providing maximum protection.Built-in mounting holes and lanyard optionFor added convenience, the TELESIN silicone case has built-in mounting holes that allow easy attachment of an optional lanyard. This allows users to carry the camera safely with them without worrying about accidentally dropping it. This is an especially useful feature for outdoor activities such as climbing, biking and scuba diving.Lens protectionThe case also comes with a special lens cover that protects the most important part of the camera from dust, dirt and scratches. The cover is easy to install and remove, allowing the camera to be ready for use quickly. As a result, users can rest assured that their lens will remain intact, ensuring the highest recording quality.Durability and stylish designThe TELESIN case, available in a sleek black color, not only perfectly protects the camera, but also gives it a modern and stylish look. With its lightweight and compact design, the case does not significantly increase the size of the camera, making it convenient to carry around every day. Specifications:Name:TELESIN silicone case with lens cover for Insta360 Ace Pro cameraManufacturer:TelesinModel:S6-PTC-01Compatible with:Insta360 ACE Pro Action CameraMounting:2x Lanyard holeColor:BlackMaterial:Silicone
Telesin 3-battery charger for GoPro HERO 13 (S0-BCG-12-TGP)The 1950 mAh Telesin S0-BCG-12-TGP charger is a compact and powerful device that allows you to charge three batteries for the GoPro Hero 13 simultaneously in just 3 hours. Thanks to its compact size, it is ideal for those who frequently record outdoors and need to efficiently manage the energy of their batteries.Smart protection and convenient useThe charger is equipped with advanced safety features that protect your batteries from overcharging, overvoltage, short circuit or overheating. With LED indicators, you can easily monitor the charge status of each battery, allowing you to better plan your camera work. The sturdy ABS housing ensures durability, and the wide operating temperature range allows safe charging in a variety of conditions.Lightweight, compact and easy to transportWith a weight of just 27.5 grams and compact dimensions, the charger will fit into any camera bag. The standard 5V/2A USB input port makes it connectable to a powerbank, laptop or mains charger for maximum flexibility in the field. ManufacturerTelesinManufacturer codeS0-BCG-12-TGPInput5V⎓2AOutput4.48V⎓650mA × 3Operating temperature5°C - 45°CMaterialABSDimensions51.7 mm × 59.6 mm × 20.4 mmWeight27.5 gCompatibilityGoPro Hero 13 batteriesProtectionOvercharge protection, Overvoltage protection, Short-circuit protection, Overheat protection, Over-power protection, Electromagnetic field protection
PULUZ waterproof case for DJI Osmo Pocket 3 45mThe PULUZ waterproof case is specially designed for the DJI Osmo Pocket 3, made for water sports. It will be perfect for surfing, diving, swimming and other water-related activities, both on the surface and underwater. It guarantees waterproofing to a depth of up to 45 meters, so you can enjoy exploring the underwater world without worrying about the safety of your camera.Reliable protectionThe hard case protects your camera from falls and collisions, and provides protection from water, moisture, dust, sand, oil and dirt. Your camera will always be safe, no matter what conditions you use it in. With a fully see-through design and a tempered glass lens with a light transmission rate of more than 95%, the case retains its original image quality. You can capture all the beautiful moments in the highest resolution, without compromising on quality.Easy underwater controlSpecially designed control buttons provide convenient and precise control of the camera even underwater. This allows you to have full control of the device, which is extremely important during dynamic activities.Included:Waterproof caseBase with quick-release buckleScrewAnti-fog film ManufacturerPuluzModelPU967THousing materialPCLens materialTempered glassWaterproofUp to 45 meters
When used with Action 5 Pro, it can expand the FOV to 182°. With the same shooting parameters, the FOV increases by 26% in width and 24% in height when compared to the standard lens without the FOV Boost Lens. While capturing selfies during surfing, the ultra-wide angle effortlessly includes your surfboard in the frame. When shooting from a first-person perspective, the footage is vibrant and immersive. Plus, the premium optical lens design ensures sharp and detailed image quality, capturing every thrilling moment of your adventure with precision.Tips The FOV Boost Lens is designed with convex optical glass. Please use it with care. To use the FOV Boost Lens, the camera must be updated to the latest firmware, and FOV Boost Lens mode must be enabled. Once the FOV Boost Lens is properly attached, the camera is waterproof up to 5 meters. However, using it underwater may cause image distortion, so it is recommended to avoid underwater use. While 182° is the maximum optical FOV achievable with this design, the actual FOV during shooting may vary slightly due to distortion correction and stabilization settings. Compatibility Osmo Action 5 Pro Osmo Action 4
Kompaktne, võimas ja valmis igaks võtteks Ulanzi PK15 Pocket 3 magnetiline laiendusklamber on nutikas lisatarvik DJI Osmo Pocket 3 kaamerale, mis teeb sinu võttekomplekti paindlikumaks ja loovamaks, ilma kasutusmugavust ohverdamata. Tänu läbimõeldud disainile jäävad kõik funktsioonid täielikult kättesaadavaks – lihtne kinnitada, mugav kasutada ja alati valmis filmimiseks. Peamised omadused Nutikas laiendusklamber DJI Osmo Pocket 3 jaoks 180° reguleeritav nurk – seinakinnitusest lauarežiimini Cold shoe kinnitus lisatarvikutele (valgus, mikrofon jpm) Võimas sisseehitatud magnet kindlaks kinnitamiseks igale metallpinnale Silikoonist kaitse kriimustuste vältimiseks Alati stabiilne, kõikjal Tänu tugevatele sisseehitatud magnetitele kinnitub PK15 kindlalt igale rauapinnale – olgu see külmkapp, autokapott või mõni muu pind. Nii saad oma DJI Osmo Pocket 3 kaamera usaldusväärselt paika panna nii toas kui välitingimustes. Loov vabadus igas nurgas 180° reguleeritav konstruktsioon võimaldab kiirelt vahetada seinale kinnituse ja lauarežiimi vahel. See annab sulle vabaduse katsetada erinevaid nurki ja kõrgusi, et luua põnevaid videoid ja fotosid. Nutikas tööriist alati kaasas Klambri sisse on peidetud magnetiga kinnitatud kuuskantvõti, millega saad vastupanu mugavalt ja kiiresti reguleerida. Rohkem kui lihtsalt kinnitus Integreeritud cold shoe kinnitus võimaldab lisada valgusti, mikrofoni või muid tarvikuid, viies sinu vlogimise või sisuloome järgmisele tasemele. Detailid, mis loevad Silikoonvooder kaitseb kaamerat kriimustuste eest Klamber püsib kindlalt paigas tänu turvarihmadele Ühilduv gimbali kaitsega Tehnilised andmed Mudel: PK15 Mõõtmed: 46.5 × 46.5 × 67.2 mm Kaal: 66.6 g Materjalid: plastik, metall, silikoon, magnetid
With the futuristically designed Leofoto MC-30 multipurpose clamp kit, you attach a camera, action cam or smartphone to just about any surface. The kit consists of the universally usable MC-30 clamp stand, the PC-90 smartphone holder and the MBH-19 mini ball head. The carrying capacity of the MC-30 kit is two kilos so you can do anything with it. Useful for a video conference, an interview, navigation or table top photography. Leofoto MC-30 Table Clamp kit. With the futuristically designed Leofoto MC-30 multipurpose clamp kit, you attach a camera, action cam or smartphone to just about any surface. The kit consists of the universally usable MC-30 clamp stand, the PC-90 smartphone holder and the MBH-19 mini ball head. The carrying capacity of the MC-30 kit is two kilos so you can do anything with it. Useful for a video conference, an interview, navigation or table top photography. Dependent MC-30 clamp tripod. The Leofoto MC-30 clamp tripod is made of black anodized aircraft aluminum and stainless steel, making it very strong yet lightweight. Thanks to the very precise adjusting screw and leverage construction, you clamp the MC-30 securely around a tabletop, bicycle handlebars, fence or tree branch. The maximum thickness that the MC-30 can handle is 30mm. The loose rubber “claws” are always perpendicular to the surface because of the smart construction. These rubber claws are square and ribbed and therefore have an optimal grip. The tripod plate of the MC-30 clamp tripod is equipped with a universal 1/4-inch tripod screw, which allows you to place a camera directly on the MC-30, but also allows you to place a ball head or a smartphone holder on it. The MC-30 weighs 219 grams. High-quality MBH-19 mini ballhead. The Leofoto MBH-19 mini ball head excels in compactness and is made entirely of metal. The mini ball head is 49mm high and has a base diameter of 29mm. A 1/4-inch tripod screw hole is provided for universal mounting. The base plate locks separately and can rotate 360 degrees while the ball can tilt 90 degrees. That ball has a diameter of 19mm and is therefore very stable. You adjust the friction of the ball with a handy wing nut. The MBH-19 mini ball head weighs just 90 grams and can carry up to two kilos of weight. The Practical PC-90 Smartphone holder. The practical Leofoto PC-90 smartphone holder is simple in design but therefore very convenient to use. The PC-90 smartphone clamp is adjustable for smartphones with a width of 56mm to 90mm. Loosen the set screw, slide the PC-90 out to the desired length and clamp your smartphone between the rubber claws. Tighten the set screw again and your smartphone is firmly secured. Ready for action! The PC-90 is CNC-machined from black anodized aircraft aluminum, making it solid, durable and lightweight. The 1/4-inch tripod screws allow you to set it up on the MC-30 or the MBH-19 with ease. The dimensions of the PC-90 phone clamp are 86mm x 25mm x 25mm so it will always fit in a jacket pocket or camera bag.
Lisakinnitused GoPro kaameratele. The Grab Bag is bag of add-on parts is for GoPro quick-release camera owners wanting more mounts. If you want to expand your mounting options for your Original HD HERO, HERO2, or HERO3 camera.this bag will set you up. It includes 1 flat surface base plate, 1 curved base plate, a thumb knob and stainless steel hardware, 1 quick release buckle, 3-way pivot arm assembly, 1 quick-release vibration plug, 1 leash tether, and a vertical J mount for mounting your camera on a vertical wall surface like a car bumper, wall, back of helmet, or similar. What's Included: 1 Flat, 3M™ Adhesive Mount. 1 Curved, 3M™ Adhesive Mount. 1 Horizontal Surface Quick-Release Buckle. 1 Vertical Surface J-Hook Buckle. 1 Thumb Knob with Nut and Bolt. 3-way pivot arm. 1 Quick-Release/Vibration Plug. 1 Leash Tether. Warranty: One Year.
Mugav rattakinnitus sinu Sony seikluskaameratele või muudele seadmetele. Tänu 1/4" statiivikeermele ei ole piiranguid, mis seadmega kasutada. Sony seikluskaameraid saab kasutada nii veekindla korpusega kui lisakorpuseta. Kinnitus on kahes suunas kallutatav - õige vaatenurga leidmine on imelihtne. Sobib kuni 37 mm diameetriga torudele kinnitamiseks.Ühilduvus: kõik mudelidMõõtmed: 38 × 76,5 × 150 mmSobiv toru diameeter: 18 - 36 mmKaal: 49 g
Ujuk kinnitub veekindla 3M kleepsuga tagakaane külge. Suurepärane abiline snorgeldamisel, sukeldumisel, surfamisel, lohesurfil, veelauasõidul ja kõikidel teistel veega seotud spordialadel. Komplektis on ka kaasas veekindel tagakaas.
Joby Action Jib KitUltra-portable extendable Jib Kit that allows you to capture unique crane shots with any pole.Removable, adjustable pole clampsTwo mounts adjust to any cylindrical pole. One goes at the base of the pole with the handle and other goes at the end where the Action Camera will be mounted.Portable & easy to assemble/dissembleAll components come in a compact bag that you can carry with you on-the-go.Adjustable cording for any pole lengthComes with a cord that can be tied to accommodate different pole lengths.Handle with 1/4"-20 screwHandle grip allows you to rotate the camera with integrated pulley system and has an extra 1/4"-20 screw so you can mount an Arm and a Grip Tight for remote video viewing.Monopod end cap, 1/4"-20 screw end cap.Level Up Your FootageExpand your creative possibilities with new perspectives and shots that previously required a large and expensive jib crane.Capture classic cinema shots such as: the crane, low and high angle, panning, tracking and others.Get a new point of view and place your camera into hard-to-reach places.Go anywhere! Take the lightweight and packable Jib Kit into the field without the weight and bulk of a large jib crane.Specifications:Designed for: Any Action Camera such as: GoPro®, Contour®, and Sony® Action CamCompatible with: GripTight Mount, Action Series AccessoriesProduct Weight: 320 Grams | 11,3 OuncesProduct Dimensions In Bag:19 x 9 x 20 cm | 7,5 x 3,5 x 8 inAcceptable Monopod/Pole Length: 40 in. + (The pulley clamps can mount 89 cm - 125 cm / 35 - 49 in. apart)Acceptable Monopod/Pole Diameter: 1,3 cm - 3,8 cm | 0,5 - 1,5 inConnection Point: GoPro mount or ¼"-20 standard screw Type Mounting / Fixation Field of Application Tripod
Kvaliteetne silikoonümbris pakub kaitset sinu GoPro kaamerale. Reguleeritava paela abil on su kaamera alati käe ulatuses, et saada parim kaader. Pane kaamera ümber kaela, randme või kinnita oma asjade külge ja naudi oma seiklusi.
