Seikluskaamerad ja tarvikud

DJI Osmo stabilisaator.; Vähendab soovimatut vertikaalset liikumist.; Sobiv kaamerale ja haardele Zenmuse X3.; Teeb video veel sujuvamaks.; Kaal: 282 g.; Mõõdud: 212 x 67 x 127 mm.

Megapikslite arv: 14,1 ja enam Mpx; Video maksimaalne resolutsioon: 1920 x 1080 (Full HD); Kaadrisagedus Full HD režiimis: 30; Kujutise stabilisaator: Ei; Ekraani suurus: 2"; Pildistamise maksimaalne resolutsioon: 4032 x 3024; Wi-Fi tugi: On;...

See suurepärase kvaliteediga adapter lubab kõiki GoPro seikluskaameraid kinnitada statiivide külge koos 1/4" statiivikinnitusega.

Sensori tüüp: CMOS; Megapikslite arv: 10–14 Mpx; Video maksimaalne resolutsioon: 3840 × 2160 (Ultra HD); Kaadrisagedus Full HD režiimis: 60; Kujutise stabilisaator: Jah; Ekraani suurus: 2,33" + 0,96"; Optiline suum: On; Objektiivi fookuskaugus: 2.8...

Sensori tüüp: CMOS; Megapikslite arv: 10–14 Mpx; Video maksimaalne resolutsioon: 1728 x 1296; Kaadrisagedus Full HD režiimis: 30; Kujutise stabilisaator: Jah; Ekraani suurus: 2,33"; Optiline suum: On; Objektiivi fookuskaugus: 3.1 mm; Pildistamise...

Tüüp: Painduv kinnitus

GoPro tarvik Replacement Battery Door Hero10/Hero9, must

Salvesta üleägedaid videosi oma telefoni automaatselt. Kõik algab kaamerast - HERO11 Black Mini — kõige kompaktsem ja kergem GoPro siiani. Uus sensor salvestab rohkem, kõrgema resolutsiooniga, parema stabilisatsiooniga ning võimalusega muuta oma materjal laiaks kinofilmilikuks või ekstra kõrgeks püstiseks pildiks või videoks. Kaameral on 5.3K video ja 24.7 MP fotod, lisaks Emmy® auhinnaga pärjatud HyperSmooth 5.0 stabilisatsioon ning pisike LCD ekraan üleval.

Bike saddle mount for Insta360 sports cameras (X3, ONE RS, ONE X2). Capture amazing shots from an unusual perspective! The accessory allows you to attach your Insta360 sports camera to the saddle of your bike. Now you can easily create stunning shots while riding your bike with the Invisible Selfie Stick! What´s more, the adjustаble mount will allow you to position the camera however you want - high, low or at an angle. Mounting the accessory will not cause you any problem. Length of selfie stick: 180 mm (before unfolding) 700 mm (after unfolding) Included: Invisible Selfie Stick 70 cm handle

Dual Use: Use as an invisible selfie stick, or fold out the built in tripod to set up and shoot. Invisible Selfie Stick: Auto-removed in 360 shots to give you unobstructed, impossible angles. Plays nice with your gear: 1/4" Standard screw mounts with ease. Invisible Selfie Stick + TripodRun and gun. Set up and shoot.All-in-one tripod designShoot drone-like perspectives at the flick of a wrist, or fold out the tripod to set and shoot.All pic. No stick.The selfiestick is auto removed in 360 content as long as you have got the tripod folded.Mount friendly1/4" mount point plays nice with your gear.Compatibility: Insta360 X3 Insta360 ONE RS 1-Inch Insta360 ONE Insta360 GO 2 Insta360 ONE X2 Insta360 ONE R Insta360 ONE X

Insta360 X4 Screen protection. Custom curved design for a precise fit with flawless coverage. Strong tempered glass for greater protection. High-definition display and crystal clear transparency. Comes with a Protector Application Kit.

Set of 4 Sunnylife ND4 ND8 ND16 ND32 filters for Insta360 GO 3/2.Sunnylife's ND filters are a great choice for those who want to take their photos and videos to the next level. The set consists of four ND filters of different values, which allow you to gradually reduce the amount of light caught by the device. This makes it possible to increase the shutter speed to capture moving objects, lights at night in an interesting way or simply avoid overexposing the photo. The filters are made of high-quality optical glass and aircraft-grade aluminum to give you the best quality and results. Protective coatingUsing a multi-layer coated film, the filters ensure image clarity, preserving realistic colors. In addition, they protect the lens from scratches, moisture and oil stains. They are the perfect solution for enthusiasts and professionals alike who want excellent quality in every shot. The filter frame is made of lightweight aircraft-grade aluminum, which guarantees the strength and durability of the product.Complete setThe Sunnylife filter set has been perfectly optimized to work with the Insta360 GO 3/Go 2 camera, ensuring not only a perfect fit, but also great results. The filters are made of aluminum and optical glass, which guarantees not only light weight - only 0.8g - but also compact dimensions of 18 x 4 mm, making them convenient to use and easy to carry. In addition, the set includes an elegant case padded with soft EVA foam, ensuring safe storage of the filters while traveling.Set contents ND4 filter x 1ND8 filter x 1 ND16 filter x 1 ND32 filter x 1BrandSunnylifeModelIST-FI9315CompatibilityInsta360 Go 3/Go 2MaterialAluminum, optical glass

PULUZ metal protective housing with lens cover for Insta 360 X4Provide your Insta 360 X4 camera with the highest level of protection and functionality with the PULUZ metal protective case and lens cover. The accessory is distinguished by a perfect fit to the shape of the device and high durability, so it will not only protect it from damage, but also will not affect the comfort of its operation.Durable design and precision manufacturingThe PULUZ protective case is made of aerospace-grade aluminum alloy, processed using the CNC method, which ensures its light weight and exceptional durability. Thanks to its perfect fit, the accessory does not block any buttons or obstruct the battery compartment or microphone openings, allowing full use of the camera's functions.Compatibility with additional accessoriesThere is a cold-shoe adapter on the top of the housing, which allows you to seamlessly connect a microphone or backlight. In addition, the magnetic interface of the folding base, which is compatible with the GoPro interface and features a 1/4-inch hole, ensures compatibility with most tripods and other accessories. This makes it easy to adapt your camera to the recording scenario of your choice!Tailored to your needsMounting and removing the camera in the PULUZ housing is quick and easy, without the need for additional tools. In addition, the set includes a rubber lens cover that will help protect the lens from scratches and other damage. Thanks to this you will easily take care of reliable protection of your equipment! ManufacturerPULUZModelPU981BMaterialAluminum alloy (protective housing) + rubber (lens cover)Dimensions14.4 x 6.56 x 4.46 cm

Sunnylife case for Insta360 X4 and accessoriesMake it easy to transport your Insta360 X4 camera and accessories. The practical case by Sunnylife will allow you to carry your necessary equipment comfortably - thanks to special compartments, each item will have its own place. There is also a large zippered pocket at your disposal. The product is made of high-quality materials, so it is very durable, and at the same time it will keep your devices safe.Safe storage and transportationThe X4-B816 case will accommodate not only the Insta360 X4 camera, but also numerous accessories, such as selfie sticks, batteries and a charging hub. Specially designed compartments ensure that each item will stably stay in place - so you can easily stay organized and protect your equipment from damage.Additional pocket for small accessoriesInside the bag is a large zippered pocket for storing small accessories such as cables, memory cards and filters. This will ensure that everything you might need is always at hand! Don't worry about losing your equipment or exposing it to damage.For the sake of your convenienceHigh-quality zippers work smoothly and reliably, providing easy access to the contents of the case. Now you can take out the equipment you need and get on with recording in no time! You no longer have to worry about missing an opportunity to take the perfect shot. What's more, the comfortable handle fits perfectly in your hand and allows you to carry the case easily. ManufacturerSunnylifeModelX4-B816MaterialFabric + flannelWeight432 gDimensions324 x 191 x 67 mmCompatibilityInsta360 X4

Video maksimaalne resolutsioon:1920 x 1080 (Full HD); Kaadrisagedus Full HD režiimis:30; Ekraani suurus:1.5"; Veekindel korpus:Veekindel korpus; Wi-Fi tugi:Ühendus võimalik

Insta360 GO 3 waterproof dive caseCreate exceptional shots underwater without worrying about your camera! The waterproof case for GO 3 cameras is a proven solution with which you can dive as deep as 60m! The carefully thought-out design with sliding buckle is a guarantee of watertightness, and the glass lenses provide even better image quality, so your recordings will be stunning! Included in the kit you will find accessories to mount the case on a tripod, for full creative freedom!Clear imageEven underwater, you won't lose image quality! The case is equipped with optical glass, which, unlike plastic ones, guarantees a clear image with rich details. Capture exciting moments, keeping them not only in your memory!Thoughtful designThe case was created with the safety of your camera in mind, which is why it uses a solid buckle lock design, giving you the assurance that the GO 3 will stay in place and that water will not get into it even at a depth of 60 meters! Among other things, you'll find anti-fog inserts and a ¼" mount adapter to make recording even more convenient!IncludedDive caseButterfly wrench x 1Protective mount x 1Mounting adapter 1/4" x 1Butterfly screw ¼" x 1Anti-fog inserts x 6Anti-slip ring x 6ManufacturerInsta360Manufacturer codeCINSBBKNMaximum depth60 mWeight100 gDimensions83.4 x 47.6 x 87.9 mm

GoXtreme 55310 for Black Hawk

Puluz Glass car holder for GOPRO Hero, DJI Osmo Action PU51

Newell SDC-USB GoPro AHDBT-901

The Boom + Bar Mount features carbon fiber extension arms that can be easily attached to most round handlebars and seatposts to get full-spectrum shots of you facing the camera, follow-cam footage or side shots of you on your bike. It also features integrated swivel points and a ball-joint camera mount that let you get the exact capture angle you want. Includes 2 carbon fiber arms, Ball-Joint Camera Mount, Pro Handlebar/Seatpost/Pole Mount, 5 Bar/Post Adapters, Curved + Flat Adhesive Mounts, mounting buckle, triangulation support slider, 4mm hex key, 2 extra hex screws, hex key storage clip and drawstring bag Premium carbon fiber arms deliver exceptional strength and durability in a lightweight design Convenient folding design makes it easy to take anywhere, pack away or adjust the extension length on the go Built-in metal mounting fingers swivel 360° to let you capture the action from any angle Attachable ball-joint camera mount provides full camera rotation and tilt for maximum flexibility Included hex key lets you easily adjust the hex screws and securely lock the arms into place Included triangulation support slider lets you use one arm to support the other to create ultra stable capture platforms Can be combined with additional Boom extensions (sold separately) to create your own customized gear setups Arm extension range is 10-21 inches Boom is not intended for and should not be used for skydiving, base jumping, bungee jumping or other aerial activities and sports

Attach the camera instantly to the handlebar. The ball-joint design on top and the Quick-Release Adapter Mount make it easy to mount the camera and adjust the shooting angle. Suitable for road and urban cycling.Compatibility Osmo Action 3 Osmo Action 4

Freewell DJI Osmo Pocket 3 - All Day -8Pack.The All Day Kit is a complete set of 8 filters designed for the DJI Osmo Pocket 3. The set includes ND8/PL, ND16/PL, ND32/PL, ND64/PL, CPL, ND8, ND16 and ND32 filters, allowing you to reduce the amount of light entering the lens, as well as achieve advanced effects such as reducing glare on the water surface while increasing exposure time. Create breathtaking images and experiment with Freewell filters! The filters are lightweight and have a magnetic design, and they install in no time. You'll find a special case to store the filters and a cloth included.CPL filterThe CPL polarizing filter is designed to reduce reflected light from various surfaces while ensuring color neutrality. It is lightweight and has been coated with a special coating to ensure optimal image quality. Your photos can gain even more depth and will impress with their naturalness.ND filtersND (Neutral Density) optical filters allow you to reduce the amount of light reaching the sensor of your camera or camcorder, without changing the color or tone of the photo. These filters are very useful when you need to increase the exposure time or increase the depth of field, but at the same time maintain the right exposure. As a result, you will get a blur of moving elements - such as water or clouds.ND/PL optical filtersIn the set you will find 4 different ND/PL filters. This is a combination of ND (Neutral Density) filter and CPL (Circular Polarizing) filter. They combine the properties of both filters, so you can get fantastic effects. They are used to reduce the amount of light and allow you to increase the exposure time. You can get the effect of blurring water or clouds in your photographs. Moreover, ND/PL allow you to reduce glare from surfaces such as water, glass, etc. Using the filters will allow you to get clearer, more natural landscape photos. ND/PL filters are available in various degrees of light reduction and polarization, allowing you to match them to specific lighting conditions and the effect you want.IncludedFiltersCaseCleaning clothManufacturerFreewellModelFW-OP3-ALDCompatibilityDJI Osmo Pocket 3Filter typeND8/PL, ND16/PL, ND32/PL, ND64/PL, CPL, ND8, ND16 and ND32Optical coatingsDustproof, scratch-resistant, oil-resistant

Peakinnitusrihm Insta360 kaameratele; Jäädvusta käed-vabalt kaasahaarava vaatenurgaga; Eesmine ja tagumine kinnitus – vahelduv vaatenurk; Võimalus kinnitada kuni kaks kaamerat korraga; Reguleeritav, mugav ja mittelibisev disain

Telesin GP-BCG-901 charger for GoPro Hero 12 / Hero 11 / Hero 10 / Hero 9 batteriesThe Telesin 3-in-1 charger allows you to quickly charge up to 3 GoPro Hero batteries simultaneously. Lightweight and compact - you can always have it on hand. Its complex security system makes it's using risk-free. What's more, the built-in LED indicators provide real-time information about the charging status. As an added bonus, the charger has a silicon compartment to store up to 2 TF memory cards.Fast battery chargingThe product supports 2.4A fast charging. This means it can charge 3 batteries for GoPro Hero 12 / Hero 11 / Hero 10 / Hero 9 in just 2.5 hours. The charger is equipped with a USB-C port, making it incredibly versatile - you don't need additional adapters to use it.Don't worry about the safety of your equipmentA special protection system protects the charger and batteries from damage. Devices are not threatened by overcharging, overloading, overvoltage, short circuit or too high temperature. A special, flame-resistant shell increases the safety of using the equipment.Easy access to key informationBuilt-in LEDs make the charger easy to use, providing you with real-time information about the charging status. For example, green color indicates that it has completed charging and yellow color indicates that the battery is almost charged. Blue color indicates that the charger has entered standby mode, and red color indicates that charging is in progress.Practical designThe device is pleasant to the touch, handy and comfortable to use. It weighs only 68.31 g, so it will not weigh down your handbag, suitcase or backpack. You can easily pack it up and take it with you wherever you need it - outdoors, on vacation with friends or on a long journey. Non-slip silicone pads allow you to stable the charger on any surface. The lid of the device is equipped with a magnetic closure.BrandTelesinNameHero 9/Hero 10/Hero 11 / Hero 12 Charging CaseModelGP-BCG-901Weight68.31gDimensions124 x 105 x 56 mmInput voltage5V 2.4AOutput voltage4.4V (when charging 3 batteries simultaneously)Compatibilitybatteries for GoPro Hero 12 / Hero 11 / Hero 10 / Hero 9Colorblack

Telesin Waterproof 3-slot Charger for GoPro Hero 12/ Hero 11 / Hero 10 / Hero 9This practical, compact accessory allows you to quickly charge 3 batteries at once for your GoPro Hero 12 / Hero 11 / Hero 10 / Hero 9. It will also be useful as a TF card reader, with which you can transfer files instantly. Thanks to its IP54 water resistance, you can use it on a daily basis. In addition, environmentally friendly materials were used during the production of the accessory.Fast chargingWith the fast charging feature, your GoPro Hero 12 / Hero 11 / Hero 10 / Hero 9 camera will be ready to shoot in a short time. The accessory allows you to charge 3 batteries at once, and it takes about 2.5 hours to charge.A 2-in-1 accessoryThe charger has another function, it serves as a TF card reader. It supports the high-speed file transfer protocol over USB at up to 20MB/s. It only takes a minute to copy 1GB of data!Water resistantThe Telesin charger has an IP54 water resistance rating, so you can use it freely without worrying about damage. Now you can renew the power of your GoPro Hero 9/10/11/12 anytime, no matter where you are recording.Functional designThe accessory is both stylish and functional. Its weight of only 147.6g and compact size make it easy to store. You can successfully fit it in your backpack or bag. Transport is easy with the included lanyard, which you can attach to your bag or hang on your finger. The product is made of environmentally friendly materials, which are characterized by high durability and resistance to fire, impact and possible damage.In the boxTelesin chargerUSB-C charging cableBrandTelesinModelGP-BTR-904-GYTransfer speed20 MB/sWeight147,6gDimensions72.9 x 68.2 x 82.9mm CompatibilityGoPro Hero 12GoPro Hero 11GoPro Hero 10GoPro Hero 9InterfaceUSB-CInputmicroUSBInput voltage5V / 2AOutput voltage4.4V, 800mACharging timeok. 2.5gTransmission protocolUSB 2.0Materialfire retardant PC, siliconeColorgrey

Telesin mount for DJI Action 4/3 cameraGain a new perspective in your footage with the Telesin adapter. It was created for DJI Action 4/3 cameras and guarantees instant mounting in the mount with a powerful magnetic base, ensuring stability and security for your device. A metal clip provides additional security to protect your device from unwanted knockdown, ensuring reliability in all conditions.Universal applicationThe Telesin mount is fully compatible with DJI Action 4/3 cameras, making it a convenient solution for users of this model. Mounting with a double cold shoe allows you to easily attach the camera to a selfie-stick, tripod, bike frame, or neck mount, allowing you to record in a variety of scenarios - from extreme sports to everyday shots.Lightweight, portable and durableRobust construction made of high-quality materials makes the camera mount reliable in all conditions. The adapter's light weight and compact size means it can accompany you anywhere, allowing you to mount your camera wherever you need it in no time. This way you won't miss the perfect opportunity to create unique shots.IncludedAdapterScrewManufacturerTelesinModelOA-TPM-T04MaterialNylon + fiber; aluminum alloy, siliconeDimensions40.2 x 21.3 x 33.8 mmWeight22.8 gCompatibilityDJI Action 4/3 cameras

Puluz SB5593

Full HD WiFi USB Must

Transcend DrivePro 20 Motorcycle Camera + 32GB microSDHC

Puluz buoyancy mount for sports cameras and phones (black)Do you like to make stunning videos underwater? Do you need a gadget that allows you to hold your camera comfortably? The PULUZ buoyancy mount will be perfect for you! It is made of high-quality materials, so it is durable and will serve you for a very long time. You don't have to worry about losing it in deep water, as it is designed to float on the surface. In addition, the bright strap included in the set will help you find the gadget faster. Create amazing shots with PULUZ! Thoughtful designWhat sets the PULUZ buoyancy mount apart is its well-thought-out design, which ensures durability and usability. With a 1/4 screw, you'll be able to easily mount on the mount, ensuring stability and security. A storage compartment for small items is an additional advantage of the PULUZ gadget, where you can store, for example, headphones or money. What's more, you'll also find an additional light-colored strap included, so it not only allows you to have a more secure grip, but also makes it easier to find your grip in the water. Enjoy comfortable camming with PULUZ!The perfect gadget for the water If you are looking for a perfect gadget for the water, then the PULUZ mount will be the perfect choice! With its help you will capture great shots. It is designed to hold a camera with a waterproof case and other parts. Just fill it with enough buoyancy - it will keep your camera above the waves. However, if you leave it empty, your device will submerge underwater. Decide for yourself how you will use the PULUZ mount. Included holder mount for the devicescrew additional adjustable strap Producer PULUZ Model PU868B Compatibility Sports cameras and phones Material ABS + anti-slip material Dimensions 18.8 × 3.8 cm

GoPro ARMTE-004-EU WEATHERPROOF SHUTTER REMOTE HERO13 / HERO12 / HERO11 / HERO

GoPro AKTLM-001 HB-SERIES LENS COLLECTION (HERO13 must)

Metal protective cage PULUZ with tripod adapter for Insta360 X4

Kaitse oma instax mini LiPlay kaamerat stiilselt ja kindlalt. Vutlaril on võrguga sisekiht, mis hoiab kaamera kindlalt paigal, ning sobivas toonis randmerihm mugavaks kaasaskandmiseks. • loodud instax mini LiPlay jaoks • sisemine võrkvooder turvaliseks hoidmiseks • randmepael mugavaks kandmiseks • kerge ja stiilne disain

Waterproof case for DJI Osmo Action 4/3 Telesin OA-WTP-003Capture the beauty of the underwater world. Created with the DJI Osmo Action 4/3 in mind, the Telesin waterproof case will allow you to safely submerge your camera to a depth of up to 45m and protect it from damage. The accessory fits the shape of the device perfectly, and thanks to the included anti-fog cartridges, it avoids vapor buildup on the lens. Now you can easily get perfect results! Reliable protectionThe Telesin OA-WTP-003 housing is an almost indispensable accessory for diving or surfing enthusiasts. It allows you to submerge your DJI Osmo Action 4/3 camera to a depth of up to 45m, so you can freely explore the underwater world and record stunning videos. What's more, the product was made of high-quality materials, so it is very durable and can provide the device placed in it with effective protection from damage. Comfortable use of the cameraThanks to its well-thought-out design, the case perfectly fits the shape of the camera and allows you to use its buttons comfortably. In addition, the screen covers are made of high-quality PC plastic, which is distinguished by a light transmission of 95% and provides a clear, clean image in almost any conditions. The accessory is also very easy to install. Create stunning shotsDon't worry about image quality deterioration when the camera is placed in the housing. The lens hood was created from high-quality tempered glass, which features high scratch resistance and allows you to achieve fantastic recording effects. The kit also comes with special anti-fog inserts that prevent water vapor deposition. So you can capture your underwater adventures in fantastic shots! In the boxWaterproof caseAnti-fog sheet x3User manualScrewBrandTelesinModelOA-WTP-003Dimensions90 x 80 x 42mmWeight95.6gCompatibilityDJI Action 4/3

Telesin screen protection film for GoPro Hero 13 (S6-FLM-08-TGP) (clear).The Telesin S6-FLM-08-TGP protective film is a precision-fit tempered glass that protects the screen and lens of the GoPro Hero 13 camera. Thanks to its high transparency (99% light transmission), it does not affect the image quality, and its ultra-thin design ensures full touch sensitivity.Durability and precise fitThe tempered glass has 2.5D rounded edges, which makes it comfortable to touch and does not stand out from the screen. Thanks to its electrostatic adhesion, the film fits perfectly to the surface, leaving no air bubbles. High scratch resistance protects the screen and lens from damage, dust and fingerprints.Easy application and full protectionThe kit includes a set of protective films for the front and rear screen and lens, ensuring full protection for the camera. Installation is quick and hassle-free, and removal of the film leaves no adhesive residue.Includedprotective film for the front screen x 2protective film for the rear screen x 2protective film for the lens x 2Cleaning clothsDust removal stickers ManufacturerTelesinManufacturer codeS6-FLM-08-TGPCompatibilityGoPro Hero 13 BlackMaterialTempered glassLight transmission99%EdgesRounded 2.5DResistanceScratches, fingerprints, dirt

Telesin 3-battery charger for GoPro HERO 13 (S0-BCG-12-TGP)The 1950 mAh Telesin S0-BCG-12-TGP charger is a compact and powerful device that allows you to charge three batteries for the GoPro Hero 13 simultaneously in just 3 hours. Thanks to its compact size, it is ideal for those who frequently record outdoors and need to efficiently manage the energy of their batteries.Smart protection and convenient useThe charger is equipped with advanced safety features that protect your batteries from overcharging, overvoltage, short circuit or overheating. With LED indicators, you can easily monitor the charge status of each battery, allowing you to better plan your camera work. The sturdy ABS housing ensures durability, and the wide operating temperature range allows safe charging in a variety of conditions.Lightweight, compact and easy to transportWith a weight of just 27.5 grams and compact dimensions, the charger will fit into any camera bag. The standard 5V/2A USB input port makes it connectable to a powerbank, laptop or mains charger for maximum flexibility in the field. ManufacturerTelesinManufacturer codeS0-BCG-12-TGPInput5V⎓2AOutput4.48V⎓650mA × 3Operating temperature5°C - 45°CMaterialABSDimensions51.7 mm × 59.6 mm × 20.4 mmWeight27.5 gCompatibilityGoPro Hero 13 batteriesProtectionOvercharge protection, Overvoltage protection, Short-circuit protection, Overheat protection, Over-power protection, Electromagnetic field protection

PULUZ waterproof case for Insta360 X4Give your Insta360 X4 camera reliable protection even in the toughest conditions with the PULUZ waterproof case. This practical accessory is ideal for scuba diving, snorkeling, swimming and other water sports, providing full protection from water up to a depth of 50 meters.Durable construction and excellent protectionThe accessory was created from tempered PC, which makes it resistant to scratches, chips and fingerprints. It is also distinguished by a lens made of PMMA with a light transmittance of 95%, which reaches 98% when coated with AR anti-reflective coating, ensuring excellent image quality. In addition, it has a special AS coating, which makes it resistant to water and fingerprints. Its additional advantage is its 5H hardness, which is comparable to the hardness of ordinary glass and provides reliable protection against mechanical damage.Create fantastic 360° shotsThe case remains invisible in full 360° shots, eliminating all blind spots. The unique optical and spherical lens design allows you to seamlessly create panoramic shots underwater. Capture the beauty of the underwater world and create plenty of great shots!Waterproof to 50mThe housing is designed to provide full water resistance to a depth of 50 meters, making it the perfect choice for all water sports enthusiasts. Now you can fearlessly submerge your camera and record an exceptional shot! The accessory is also very easy to install and remove, allowing you to get ready for filming in no time.IncludedWaterproof housingAdapterLong screwSmall wrenchStorage bagAlcohol-soaked wipe (3-pack, 6 pieces total)Anti-fog cartridges (4-pack, 24 pieces total) ManufacturerPULUZModelPU977TMaterialTempered PC + PMMA + silicone + stainless steelDimensions8.77 x 8.92 x 16.5 cmWater resistanceUp to 50 mCompatibilityInsta360 X4

DJI CP.RN.00000190.01

PULUZ polycarbonate lens hood for Insta360 X4The PULUZ lens hood for Insta360 X4 is a reliable accessory that provides professional protection and superior image quality. It is made of high-permeability and corrosion-resistant polycarbonate, making it extremely resistant to scratches, drops and dust, effectively protecting your camera's lens from everyday damage and scratches. The twist-lock mechanism allows for quick and easy installation and removal. This allows you to get your camera ready for action in no time, whatever the situation.Excellent image qualityThe shield is coated with an anti-reflective layer that provides light transmission of more than 95%. As a result, image quality is maintained at the highest level, and photos and videos remain sharp and clear, without unwanted reflections and distortions. With the lens hood in place, the camera still offers a wide field of view and is fully compatible with the original image blending algorithm.Included:lens hood x2wet wipe ManufacturerPuluzModelPU989TDimensions4 x 1.5 cmCompatibilityInsta360 X4 camera

TELESIN underwater housing for DJI Action 3 / 4Underwater housing for DJI Action 3 / 4 is an accessory that allows you to get new perspectives in marine photography. Thanks to its innovative semicircular design, it provides an aquarium effect with a 50/50 view. The product is designed to meet the needs of both amateur and professional photographers, offering clear framing, selfie mode and the ability to be submerged to a depth of up to 30 meters.New perspectives in marine photographyThe TELESIN underwater housing allows you to capture unique photos and videos of the underwater world. Thanks to its semicircular design, you can achieve a 50/50 view aquarium effect, allowing you to capture underwater and over-water landscapes at the same time.Perfect framing and selfie photosThe housing moves the surface of the water to a distance of 70mm, which ensures perfect framing without blurring the water line. What's more, the case has a front screen opening and a curved grip, making it easy to take selfie photos. This makes it easy to take photos underwater without the need for additional equipment.High light transmissionThe organic glass used in the construction of the case features a high light transmission rate of 95%. It guarantees excellent quality of photos and videos, where you will capture every detail with extraordinary clarity.Immersion depth of up to 30 metersThe housing is waterproof, allowing the camera to be submerged to a depth of up to 30 meters. From now on, you can film and take photos even during a deep dive. Robust construction and corrosion-resistant materials provide long-lasting protection for your camera.Semi-circular housingAdjustable trigger handleLocking screwBuoyancy bar with non-slip gripWrist strapAnti-fog lensCleaning clothCover ManufacturerTelesinModelOA-DMP-001CompatibilityDJI Action 3 / 4Aquarium effect50/50 underwater and above water viewImmersion depthup to 30 metersLight transmittance95%, high transparency of organic glassDiameter6.3 inches

Sunnylife waterproof case for DJI Osmo Action 4/ 3The Sunnylife OA3-FS519 waterproof housing is an indispensable accessory for diving and underwater photography enthusiasts. Thanks to its rugged design, it allows the camera to be safely submerged to a depth of up to 40 meters, providing a tight seal and waterproof protection.Durability and protectionMade of durable PC plastic, stainless steel and tempered glass, this housing effectively protects the camera from shocks, scratches and other damage. It is corrosion-resistant, ensuring long-lasting durability even in the most demanding conditions. At the same time, it is very easy to install and has cold-shoe adapters that allow you to easily and quickly attach additional accessories. ManufacturerSunnylifeNameWaterproof Case for Osmo Action 3ModelOA3-FS519MaterialPC + stainless steel + tempered glassWeight71 gCompatibilityDJI Osmo Action 3