Freewell DJI Osmo Pocket 3 - All Day -8Pack.The All Day Kit is a complete set of 8 filters designed for the DJI Osmo Pocket 3. The set includes ND8/PL, ND16/PL, ND32/PL, ND64/PL, CPL, ND8, ND16 and ND32 filters, allowing you to reduce the amount of light entering the lens, as well as achieve advanced effects such as reducing glare on the water surface while increasing exposure time. Create breathtaking images and experiment with Freewell filters! The filters are lightweight and have a magnetic design, and they install in no time. You'll find a special case to store the filters and a cloth included.CPL filterThe CPL polarizing filter is designed to reduce reflected light from various surfaces while ensuring color neutrality. It is lightweight and has been coated with a special coating to ensure optimal image quality. Your photos can gain even more depth and will impress with their naturalness.ND filtersND (Neutral Density) optical filters allow you to reduce the amount of light reaching the sensor of your camera or camcorder, without changing the color or tone of the photo. These filters are very useful when you need to increase the exposure time or increase the depth of field, but at the same time maintain the right exposure. As a result, you will get a blur of moving elements - such as water or clouds.ND/PL optical filtersIn the set you will find 4 different ND/PL filters. This is a combination of ND (Neutral Density) filter and CPL (Circular Polarizing) filter. They combine the properties of both filters, so you can get fantastic effects. They are used to reduce the amount of light and allow you to increase the exposure time. You can get the effect of blurring water or clouds in your photographs. Moreover, ND/PL allow you to reduce glare from surfaces such as water, glass, etc. Using the filters will allow you to get clearer, more natural landscape photos. ND/PL filters are available in various degrees of light reduction and polarization, allowing you to match them to specific lighting conditions and the effect you want.IncludedFiltersCaseCleaning clothManufacturerFreewellModelFW-OP3-ALDCompatibilityDJI Osmo Pocket 3Filter typeND8/PL, ND16/PL, ND32/PL, ND64/PL, CPL, ND8, ND16 and ND32Optical coatingsDustproof, scratch-resistant, oil-resistant
Peakinnitusrihm Insta360 kaameratele; Jäädvusta käed-vabalt kaasahaarava vaatenurgaga; Eesmine ja tagumine kinnitus – vahelduv vaatenurk; Võimalus kinnitada kuni kaks kaamerat korraga; Reguleeritav, mugav ja mittelibisev disain
Transcendi DrivePro Body 60 kerekaameral on juhtplokiga ühendatud kompaktkaamera, mis võimaldab kasutada mitmesuguseid kinnitusvõimalusi. Avaliku turvalisuse spetsialistide jaoks kohandatud vastupidav ja väga tundlik DrivePro Body ...
See klaasobjektiiv asendab teie GoPro'ga kaasa tulnud originaalse kaitseobjektiivi. See on valmistatud erakordselt tugevast Corning® Gorilla® klaasist, et kaitsta teie kaamera sisemist objektiivi samal ajal vett tõrjudes, aidates vähendada objektiivi sära ja muid peegeldusi teie salvestistes. Sobib HERO9/10/11/12 Black mudelitele.
Enhanced stability to securely mount your camera. Works on the bumpiest of roads and the toughtest terrains. Firm, secure grip on the selfie stick without having to connect to the selfie stick's 1/4" mount. Ring-shaped design creates a super stable setup, with a strong, lightweight, aluminum alloy build. Compatible with Insta360 70cm/85cm/114cm Invisible Selfie Stick and the Action Invisible Selfie Stick. Note: The Selfie Stick Ring Mount should be used with either the Heavy Duty Clamp or Motorcycle U-bolt Mount. Insta360 doesn't offer legal advice. Motorcycle riders should consult professionals for road use and traffic law guidance. Always follow local laws and regulations when using Insta360 products. Insta360 is not liable for any legal issues that may arise from improper use of its products. Firm holdGripping the selfie stick itself provides greater protection against wind and bumpy roads, plus it protects your 1/4" mounting point from wear and tear.Flawlessly designed to withstand any rideThe ring structure is crafted from durable aluminum alloy and features anti-slip pads for added stability.Compatible with a range of selfie sticksWorks with the Insta360 70cm/85cm/114cm Invisible Selfie Stick and the Action Invisible Selfie Stick.Compatibility Insta360 Ace Pro 2 Insta360 Ace Pro Insta360 Ace X4 X3 ONE X2 GO 3S GO 3 GO 2 ONE RS (Twin/4K) ONE R
Use with a 360º Insta360 action camera and the Action Invisible Selfie Stick for impossible third-person angles. This mount is only compatible with the Insta360 Action Invisible Selfie Stick. Use with a wide-angle Insta360 action camera for immersive first-person POVs. Comes with everything you need for easy at-home installation. Sits securely on your bike's head tube, replacing any standard 28.6mm (1-1/8in) headset top caps. Bike Headset Cap MountRide hard, shoot easy.More flexibilityUse the mount with your Insta360 cam for more flexibility over what you capture. From immersive wide-angle POVs to incredible third-person shots, it's all possible.Less fiddling, more pedalingThe mount is lightweight, easy to use and install at home and has minimal impact on your handlebars.Shoot any angleAn adjustable design makes it easy to rotate whenever you need a new angle. Get more creative freedom without interrupting your flow!Center stageCapture cinematic wide-angle shots of your ride with Insta360 Ace Pro 2. Adjust the universal joint as shown below to center the angle.Compatibility Insta360 Ace Pro 2 Insta360 Ace Pro Insta360 Ace X4 X3 ONE X2 ONE X GO 3S GO 3 GO 2 ONE RS (Twin/4K) ONE R
Kaitse oma instax mini LiPlay kaamerat stiilselt ja kindlalt. Vutlaril on võrguga sisekiht, mis hoiab kaamera kindlalt paigal, ning sobivas toonis randmerihm mugavaks kaasaskandmiseks. • loodud instax mini LiPlay jaoks • sisemine võrkvooder turvaliseks hoidmiseks • randmepael mugavaks kandmiseks • kerge ja stiilne disain
PULUZ metal case for DJI OSMO Pocket 3 (PU933B)Give your DJI Osmo Pocket 3 camera the ultimate in protection and functionality with the PULUZ Metal Case. Made of high-quality aluminum alloy, this accessory offers solid protection and versatile expandability, ideal for professional content creators.Robust protection and durabilityThe case is made from high-quality aluminum alloy, using a CNC process to ensure durability and aesthetic appeal. As a result, it provides reliable protection for the DJI Osmo Pocket 3 camera, protecting it from impact damage and more. In addition, excellent heat dissipation properties prevent the device from overheating.Convenient expansion and versatilityThe case comes with two cold-shoe adapters that allow you to connect additional accessories, such as backlights or microphones. This allows you to easily adapt your device to different recording scenarios, increasing its functionality.Universal adapter and easy installationThe PULUZ metal housing offers a universal adapter that allows quick installation and removal of the camera. It also comes with six screws and an allen wrench for easy installation. The product is also compatible with a wide range of camera accessories, thanks to a 1/4-inch screw hole on the bottom. You can connect a tripod, selfie stick, mount or other accessories to it, allowing you to take full advantage of the camera's capabilities.IncludedMetal housingAdapterScrew x6Allen wrench ManufacturerPULUZModelPU933BMaterialAluminum alloyCompatibilityDJI Osmo Pocket 3
This kit includes a Battery Cover Cold Shoe Adapter and a Quick-Release Cold Shoe Adapter, both compatible with accessories such as fill lights and microphones that have a cold shoe mount. Its compact design saves space, allowing for convenient handheld shooting even when the camera is equipped with two types of accessories simultaneously.Tips When using the Osmo Action Battery Cover Cold Shoe Adapter, make sure that it is securely fastened without any gaps, and keep it clean. The Osmo Action Quick-Release Cold Shoe Adapter contains magnets. Handle it with care. Do not mount accessories weighing more than 200 g on the cold shoe or subject it to vigorous shaking. In The Box Osmo Action Battery Cover Cold Shoe Adapter × 1 Osmo Action Quick-Release Cold Shoe Adapter × 1 SpecificationsOsmo Action Battery Cover Cold Shoe Adapter Weight: 8.7 g Dimensions: 43.5×18.5×12.4 mm (L×W×H) Osmo Action Quick-Release Cold Shoe Adapter Weight: 17.6 g Dimensions: 39.7×21.2×16.1 mm (L×W×H) Compatibility Osmo Action 5 Pro Osmo Action 4 Osmo Action 3
PGYTECH Shield for DJI Osmo Action 5 ProThe PGYTECH Shield is an indispensable accessory for DJI Osmo Action 5 Pro camera users who value flexibility, protection and quick installation. Made of lightweight yet durable aluminum, it guarantees the full safety of the camera when recording in extreme conditions. With this cover, you get more mounting options, seamless transition between landscape and portrait orientation, and quick access to all ports, allowing you to focus solely on your creative work.Full protection and perfect fitThe cover was designed specifically for the DJI Osmo Action 5 Pro to provide a perfect fit and protection from mechanical damage and scratches. The robust design does not block access to any of the ports, allowing you to connect additional devices freely. It keeps your camera ready for action at all times - regardless of conditions.Quick installation thanks to snap-on designThanks to an innovative snap-on mechanism, the PGYTECH cover allows you to attach and remove your camera in no time. The simple locking system provides a stable mount that keeps the camera in place even during dynamic shots. This solution saves you time and makes your work easier, allowing you to focus on capturing the perfect frame.Magnetic connection and easy change of orientationThe built-in magnetic connector allows quick connection to DJI quick-release accessories. An additional 1/4-inch thread allows you to easily switch between horizontal and vertical recording, giving you full control over framing and creativity. This makes it easy to adapt your shots to different platforms and work styles.Lightweight and durable aluminum constructionMade of high-quality aluminum, the PGYTECH hood is lightweight, weighing just 72 grams, but sturdy enough to withstand heavy use. The aluminum construction efficiently dissipates heat, which prevents the camera from overheating during long recording sessions. It's a guarantee of durability and reliability in all conditions. ManufacturerPGYManufacturer codeP-58A-010MaterialAluminum alloyNet weight72 gProduct dimensions81.4 mm × 54.4 mm × 33.8 mmPackage dimensions121 mm × 72 mm × 39 mmCompatibilityDJI Osmo Action 5 Pro
Head Strap 2.0 has a modular design that can be configured into three different setups. Use the headband with the top strap for more support and stability during intense activities, or the headband on its own for a low-profile setup during lower-intensity activities. The removable clip attaches your GoPro to caps, belts and more, while the main headband can strap your GoPro to stationary objects for added versatility. Includes head strap, top strap, camera clip mount and thumb screw Three different mounting setups include fully configured headband with top strap, headband-only and clip-only Fully configured headband with top strap provides support and stability for high-intensity activities like rock climbing, endurance sports and more Headband-only configuration provides a comfortable fit for activities like fishing, cooking or playing with the kids Main headband can be easily unlatched for mounting to tree trunks, poles or other objects Removable clip mount lets you attach your GoPro to caps, belts, outerwear and more Water-resistant, high-performance materials and anti-slip design
GoPro Shorty on miniatuurne selfie-stick ja kolmjalg-statiiv kaks-ühes. Käsistatiivi kompaktne disain teeb selle heaks kaaslaseks pea igal tegevusel. Pikenda statiivi, et saada parimaid grupipilte, selfiesid või muid ägedaid nurki. Shorty’t saab tänu statiivi jalgadele panna ka igale sirgele pinnale seisma, et saada ilusaid timelapse võtteid.
Other features: Pro-quality adapter for connecting a 3.5mm mic to your GoPro. Whether you want crystal-clear studio sound for music or clearer voice audio in action environments, you can quickly and easily connect a wide range of 3.5mm microphones. Enables high-quality audio capture when using a pro-level external mic. USB-C power and data extension with 90° connector. Connects a wide range of external 3.5mm mics. Enables stereo mic and line input for external audio sources like an audio recorder or mixer. 106dB stereo analog-to-digital converter. Producer product name: Pro 3.5mm Mic Adapter Compatibility: HERO7 Black, HERO6 Black, HERO5 Black, HERO5 Session, 3.5mm mic or line-in connector1 works with powered or non-powered mic Gross depth (mm): 140.00 mm Gross height (mm): 25.00 mm Gross weight: 0.06 kg Gross width (mm): 100.00 mm Net weight: 0.03 kg Packing quantity: 1.00 pc(s) Tare weight (kg): 0.03 kg Volume (m3): 0.00 m³ WEEE tax: Yes WEE classification: CL109:5:2017-04-01
Sensori tüüp: CMOS; Megapikslite arv: 14,1 ja enam Mpx; Video maksimaalne resolutsioon: 2880 x 2160; Kaadrisagedus Full HD režiimis: 60; Ekraani suurus: 2"; Wi-Fi tugi: On; Veekindel korpus: On; Löögikindel korpus: Ei; GPS: Ei; Mälukaarditugi:...
Designed for Ace Pro & Ace. 1650mAh, high-capacity battery to capture all the action. Includes: 1× Ace Pro & Ace Battery, 1× Battery Storage Case. Normal charging time 70 min.
The first-ever Mini version in the RS series, DJI RS 3 Mini is a small, lightweight handheld stabilizer with a powerful payload capacity. It supports mainstream mirrorless camera and lens combinations and inherits the excellent stabilization performance of the RS 3 series. With DJI RS 3 Mini, unleash your shooting potential and achieve effortless professional creation. 795 g (1.75 lbs) Lightweight Design Supports A7 + 24-70mm F2.8 GM Bluetooth Shutter Control 3rd-Gen RS Stabilization Algorithm Native Vertical Shooting 1.4" Full-Color Touchscreen A Breakthrough in a Compact BodyRS 3 Mini adopts an innovative redesign that includes a smaller build, integrated battery, and native vertical shooting capability. The compact and portable body can easily fit into a shoulder bag, allowing you to travel light. When in use, RS 3 Mini is about half the size of the RS 3 Pro, making it more convenient for long-duration use.Super Light, Easy to ControlRS 3 Mini weighs only 795 g (1.75 lbs) in Portrait mode, approximately 50% lighter than RS 3 Pro and 40% lighter than RS 3. It weighs only 850 g (1.8 lbs) when shooting with the horizontal plate. Additionally, a concentrated center of balance provides a more stable and ergonomic hand-held experience.Effortlessly PowerfulRS 3 Mini has a payload capacity of up to 2 kg (4.4 lbs), making it best-in-category at its weight,* letting it easily handle larger setups like a Sony A7S3 + 24-70mm F2.8 GM lens. It supports mainstream full-frame or APS-C mirrorless cameras, enabling a wide range of camera and lens combinations. With high-torque motors, RS 3 Mini can retain stable shooting when zooming to max focal lengths on most lenses without the need for rebalancing.* As of January 2023.Professional StabilizationWith the same outstanding 3rd-Gen RS Stabilization algorithm as RS 3 Pro, RS 3 Mini can achieve professional-grade image stabilization. Whether capturing a low-angle shot, or shooting in flashlight mode, your shots stay stable.Rich Camera MovementsRS 3 Mini's unique size and features provide ample opportunity to achieve rich camera movements and language. It also reduces the need to re-shoot due to camera shake, allowing you to capture every moment and create with more confidence.New Dual-Layered Quick-Release PlateAn upgraded dual-layered quick-release plate features an upper plate with a curved placement guide that prevents the camera from rotating and loosening. With clear mounting and locking marks, launch and storage efficiency are further enhanced. It also follows the ARCA standard, allowing for convenient switching between tripods.Native Vertical ShootingThe RS series has made a breakthrough in native vertical shooting on RS 3 Mini. Switch to vertical instantly without additional accessories.Just mount the standard Quick-Release Plate to the gimbal's vertical arm and film content that's optimized for social media platforms.Compared to portrait modes on other gimbals, the gimbal rotation angle of RS 3 Mini in Native Vertical mode is greatly expanded. It even offers the same control experience as horizontal mode. It is also easy to film in Upright, Underslung, Flashlight, and other operation modes.NATO Expansion PortRS 3 Mini is equipped with a NATO port to support the installation of accessories such as briefcase handles, external fill lights, and monitors, allowing for more configurations and greater flexibility.Bluetooth Shutter ControlRS 3 Mini comes with the same Bluetooth shutter control that debuted on RS 3 Pro. This function supports mainstream mirrorless camera models and allows RS 3 Mini to automatically reconnect with a camera after the initial pairing.After Bluetooth pairing, you can directly control the video recording and photo capture functions of your camera via the record button on the gimbal. When using a Sony camera with a supported digital lens, you can directly control the lens's optical or digital zoom via the front dial, eliminating the need for a camera control cable.Gimbal Mode Switch ButtonPress the M button to switch between PF (Pan Follow), PTF (Pan and Tilt Follow), and FPV mode. Photographers can also customize the follow speed and other parameters of RS 3 Mini on the touchscreen, facilitating a smoother and more intuitive shooting experience.1.4" Full-Color TouchscreenRS 3 Mini features a 1.4-inch full-color touchscreen with a new UI. Adjust most functions without the app and access common settings quickly and intuitively.Front Dial FocusingLike the rest of the DJI RS series, RS 3 Mini sports an ergonomic front dial that rotates to adjust the focus, ISO, aperture, shutter, and other parameters. Control the movement of the gimbal's three axes with the front dial for a more effective solo-shooting experience.Shoot for 10-Hours StraightThe integrated battery grip supports up to 10 hours of runtime, providing sufficient power to fully meet the shooting needs of all-day use. Recharge RS 3 Mini in as little as 2.5 hours to get back to shooting quickly. You can even use it while charging.
Insta360 X3 Water Sports Rope Mount. Easily fixed to the line, allowing for easy capture when kitesurfing or wakeboarding. Fully invisible case unlocking epic third-person views. Fixes horizontally to avoid camera spinning, allowing for stable, high-quality shots. Supports mounting on a sturdy rope with a diameter between 1-8mm.
Video maksimaalne resolutsioon:3840 × 2160 (4K); Kaadrisagedus Full HD režiimis:30; Ekraani suurus:2,33" + 1,3"; Veekindel korpus:Veekindel korpus; Wi-Fi tugi:On
Püüdke efemerseid hetki! Tähtsad hetked ei taha korduda. Ainulaadne kaader ei tundu kordusena. Sa ei tunne samu emotsioone kaks korda. Kaamera kaitsmiseks ei pea te olema professionaal. Usaldage Cam Protection™-i ja ärge muretsege oma videoideede pärast. Kaitsta löökide eest Olgem realistid – me ei saa sind kaitsta kõige eest, mis võiks videoplaane segada. Oleme aga spetsialistid seadmekadude minimeerimisel. Cam Protection™-is ühendame kile paindlikkuse ja klaasi vastupidavuse. See segu suurendab löögikindlust 250% ja ei purune! Kaitske seda kriimustuste eest See võib teid üllatada, kui õhuke on Cam Protection™. Tegelikult on kaitse paksus vaid 0,2 mm, seega on see peaaegu nähtamatu. Kuid ärge laske end eksitada välimusest – klaas kaitseb kriimustuste eest 7H tasemel. Paigaldage ilma mullideta Kas sa lähed paanikasse, kui mõtled kaitse paigaldamisele? Kinnitame teile, et isegi algajad saavad Cam Protection™ installimisega hakkama. Täiuslike mõõtmetega kaitse mullide vältimiseks Inviscid-Sil™ liimiga. Mis võib valesti minna? Ei midagi, nii et teeme ära!
The Boom + Bar Mount features carbon fiber extension arms that can be easily attached to most round handlebars and seatposts to get full-spectrum shots of you facing the camera, follow-cam footage or side shots of you on your bike. It also features integrated swivel points and a ball-joint camera mount that let you get the exact capture angle you want. Includes 2 carbon fiber arms, Ball-Joint Camera Mount, Pro Handlebar/Seatpost/Pole Mount, 5 Bar/Post Adapters, Curved + Flat Adhesive Mounts, mounting buckle, triangulation support slider, 4mm hex key, 2 extra hex screws, hex key storage clip and drawstring bag Premium carbon fiber arms deliver exceptional strength and durability in a lightweight design Convenient folding design makes it easy to take anywhere, pack away or adjust the extension length on the go Built-in metal mounting fingers swivel 360° to let you capture the action from any angle Attachable ball-joint camera mount provides full camera rotation and tilt for maximum flexibility Included hex key lets you easily adjust the hex screws and securely lock the arms into place Included triangulation support slider lets you use one arm to support the other to create ultra stable capture platforms Can be combined with additional Boom extensions (sold separately) to create your own customized gear setups Arm extension range is 10-21 inches Boom is not intended for and should not be used for skydiving, base jumping, bungee jumping or other aerial activities and sports
TELESIN Filter set CPL/ND8/ND16/ND32 for DJI Action 4/ 3Create even more stunning shots with your DJI Osmo Action 4/3 camera. In the package you will find 4 filters - CPL, ND8, ND16, ND32, which will allow you to get stunning results. The accessories are very easy to install, and use high-quality Schott AG glass and lightweight aluminum alloy. Top quality workmanshipThe frames of the filters were created from high-grade aluminum alloy, which made it possible to significantly reduce their weight and extend their life. Schott AG optical glass was also used for the accessories, which is distinguished by an optimal refractive index and ensures faithful color reproduction. Its surface was additionally coated with a special protective layer. Hassle-free installationThe installation of the filters will not cause you any problem - it only takes a moment! This allows you to quickly change accessories if necessary. You will no longer miss the opportunity to create a unique shot! What's more, each filter is equipped with a silicone cover that protects the camera lens from scratches. Fantastic image qualityThe included CPL filter eliminates polarized light, making the water in your photos more transparent and the sky more blue. This is perfect if you intend to photograph landscapes! And the ND filters (8/16/32) reduce exposure and increase shutter speed, which is ideal for filming empty streets, clouds or waterfalls, for example. In the boxCPL filterND8 filterND16 filterND32 filterBoxBrandTelesinNameAction 4/3 filters setModelOA-FLT-005Type of filtersCPL, ND8, ND16, ND32MaterialAluminum alloy + Schott AG optical glass + siliconeDimensions39.6 x 6.65mmWeight6,78gCompatibilityDJI Osmo Action 4/3
Telesin Magnetic Quick Mount Kit for Sports CamerasThe Telesin Magnetic Quick Mount Kit is an innovative solution for active people who want to capture their experiences from different perspectives without having to hold the camera in their hands. With strong magnets and a state-of-the-art mounting system, the kit offers quick mounting and dismounting of sports cameras, allowing you to freely create dynamic shots in any situation.Exceptional magnetic strength and safe useOne of the key advantages of the Telesin kit is the use of strong NdFeB magnets, which guarantee a secure and safe attachment of the camera. The magnetic system is designed to prevent accidental detachment of the camera even when running or jumping. However, for maximum effectiveness, thin clothing is recommended to avoid reducing the magnets' adhesive force.Versatility thanks to nano-viscoseThe innovative nano-viscose material in the Telesin kit is a novelty that allows the camera to be attached to almost any smooth surface, such as glass, metal or tiles. This reusable nano viscose pad is easy to clean, allowing repeated use without worrying about losing its adhesive properties. As a result, the kit offers not only the traditional chest mount, but also more creative mounting options on other surfaces.Quick mounting and easy change of perspectivesThe Telesin kit comes with a magnetic base with two jaws, allowing you to instantly change accessories in just two seconds. This makes it easy to switch from a chest mount to a selfie stick or other mount without complicated assembly. This allows you to quickly adapt to changing conditions and needs while recording, making it an ideal choice for active content creators.Compact and easy to storeThe kit weighs just 119 grams and comes with a convenient waterproof storage pouch, making it ideal for any trip. Its compact size makes it easy to carry and store, and its wide compatibility with a variety of sports cameras and phones makes it an ideal addition to any film equipment collection.IncludedMagnetic base*1Magnetic mount*1Locking screw*1Lanyard*1Nano viscose holder*1Nano viscose protective cover*1Selfie stick adapter kit*1Storage bag*1 Name:Telesin magnetic quick mount kit for sports camerasManufacturer:TelesinModel:TE-MMK-001Dimensions (Lanyard):340~610mmDimensions (Magnetic Holder):85*55*28mmMaterial:PC plastic, stainless steel, strong NdFeB magnets, nano viscose.Weight:119gLifting capacity:300g
Telesin remote control for GoPro Hero 12 / 11 / 10 / 9 / 8 / MAX (GP-RMT-T10).The remote control allows you to remotely operate GoPro HERO 12 / 11/ 10 / 9 / 8 / MAX cameras. It provides convenient access to all the functions of the camera, making it easier to record spectacular videos and create original shots. Its range is as much as 80 m, so you do not have to worry about signal interference. Operation of the device is extremely simple, and the connection takes just a few seconds. What's more, the remote control allows you to operate up to five cameras simultaneously. The included band allows you to wear it like a watch.Convenient operationThe remote control will come in handy during mountain expeditions or cycling. With its help you can easily take a group photo, record a video, turn on Timelapse or change camera settings. Placed on the wrist, it provides maximum comfort and safety during active leisure.Long working timeThe T10 remote control can operate for up to 10 hours on a single charge. The long working time is influenced by the low-power Bluetooth technology used. Convenient magnetic charging is made possible by the included cable, and a practical screen displays information about the charge level of both the remote control and the camera.Wear it like a watchThe kit comes with a practical band, which is made of skin-friendly materials and allows you to mount the remote control on your hand. This allows you to wear it like a watch and use it even in extreme situations. The adjustable length guarantees that the armband will fit every user.Practical solutionsThe remote control is equipped with a small screen that provides information about the charge level of the remote control and the camera or the recording time. T10 is compatible with GoPro HERO 12 / 11 / 10 / 9 / 8 / MAX cameras, what's more, you can operate them at the same time, because T10 provides control over up to 5 cameras at once. Large buttons make the use of the remote control simple and pleasant.Included:Telesin T10 remote control for GoProPackagingWristbandCharging cableUser manual ManufacturerTelesinNameT10 Remote ControlModelT10CompatibilityGoPro HERO 12 / 11 / 10 / 9 / 8 / MAXSize66 x 39.4 x 17.5 mmWeight36 gMaterialABS + TPU (remote control), lycra + flannel (band)Range80 mConnectivityBluetoothOperating time10 h
Osmo Action chest mountGet a unique perspective and create original shots. This practical DJI accessory allows you to stably attach your Osmo Action, DJI Action 2 or Osmo Action 3 camera to your chest for comfortable use. It is ideal for recording while running or cycling, for example! With its help you can easily prepare unique shots from a first-person perspective. The mount also allows you to adjust the angle of the camera. In the boxChest mountLocking screwSpecificationBrandDJINameOsmo Action Chest Strap MountDimensions340x230x74mmWeight216gDimensions of locking screw55.6x23x13.3mmWeight of locking screw11.2gCompatibilityOsmo Action 3, DJI Action 2, Osmo Action
GoPro Dual Battery Charger + Battery komplekt sisaldab kahte lisa 1720mAh taaslaetavat akut Sinu GoPro 9/10/11/12 Black seikluskaamera jaoks. Samuti on olemas topelt laadija, et saaksid samaaegselt laadida kahte GoPro akut.
Vaheta kinnitusi ilma hetkegi kaotamataGoPro Magnetic Latch Mount muudab HERO13 Blacki kinnituste vahetamise lihtsamaks kui kunagi varem. Kinnita see käepideme või kerekinnituse külge, et kiirelt vaatenurka muuta. Magnetic Latch Mount kasutab kaamera joondamiseks sisseehitatud magneteid, nii et Sul ei jää muud teha, kui see paika klõpsata – isegi pöidlakruvi pole vaja. Kaamera vabastamiseks vajuta lihtsalt lukke. Sisaldab 1 Magnetic Latch Mount kinnitust ja pöidlakruvi Võimaldab hõlpsalt ja kiiresti vahetada HERO13 Black kinnituste vahel ilma pöidlakruvita Magnetiline kahe lukuga disain joondub kaameraga ja aitab seda lukustada, kui kaamera on adapterisse surutud Sümmeetriline disain võimaldab kinnitada kaamera mõlemas suunas Kahe luku pigistamine vabastab kaamera koheselt Vastupidav metallkonstruktsioon hoiab adapteri jäiga ja turvalisena Ühildub kõigi GoPro kinnitustega
HERO13 White on kaamera igat tüüpi loovale kasutajale, olles võimas kombinatsioon tipptehnoloogiast ja lõpututest loomingulistest võimalustest. Sellel kompaktsel kaameral on oma klassi parim 5.3K60 videojäädvustus ja legendaarne GoPro vastupidavus Uus võimsam Enduro aku pikendab salvestusaega kõikides ilmastikuoludes. Tänu uuendatud kinnitussüsteemile annab HERO13 Black rohkem paigalduspaindlikkust kui ükski teine GoPro enne seda.
Newell CPSS1B is an innovative battery replacement designed for GoPro 13 sports cameras. The cells and modern electronics used in it will satisfy even the most demanding users. The presented cell offers 2000 mAh capacity. You will successfully use it while working on videos. Thanks to the 40-month warranty, the revolutionary Newell battery will accompany you for many years, and in case of any failure, help will be quickly provided! compatible with the latest version of the GoPro 13 camcorder created for intensive and long-term use long life (resistant to a large number of charging cycles) covered by a 40-month manufacturer’s warranty high capacity of 2000 mAh / 7.8 Wh quality confirmed by many years of experience of the Newell brand compatible with original chargers and their replacements no occurrence of “memory effect” High qualityThe best quality cells are used in the production of Newell batteries. The capacity quoted in milliamps is real and provides a long working time – more than 3 hours of footage at a resolution of 1080p 30 fps.100% safetyThe Newell replacement CPSS1B battery uses an intelligent safety system, based on an electronic IC. It regulates the charging process while ensuring a high level of safety. There are also a number of technologies to protect against overheating, overcharging and overloading. Thanks to all these innovations, the battery replacement guarantees even greater reliability and durability!Advanced technologyThe Newell replacement is built with lithium-ion technology. It allows repeated charging and discharging, as well as recharging at any time without the risk of the so-called “memory effect”.Many years of experienceThe Newell brand has been on the market for many years and has a long list of satisfied customers, both among professionals and amateur photographers.40-month manufacturer’s warrantyNewell means hundreds of thousands of satisfied customers from all over the world, who have been able to enjoy high-quality replacements for batteries used in various devices for more than a dozen years. It is for their sake that the service warranty on all products of the brand has been extended to 40 months. Choosing Newell rechargeable batteries you can be sure that they will serve you for at least 3 years while working and pursuing your passions!Compatibility GoPro HERO13
New upgraded tail mount kit to easily capture immersive third-person shots. One accessory, two shots. Mount directly below the seat or combine to unleash a full third-person shot setup. Includes multiple clamping points for maximum stability. Inspired by gimbals, the kit can be easily adjusted to achieve the perfect shot angle. Designed for road cycles. Insta360 is not responsible for any legal issues arising from improper use of this accessory. Bike Tail Mount KitNew upgraded tail mount kit that nails third-person shots.Record your ride, drone-freeWhen paired with an Insta360 360° action cam, use an Invisible Selfie Stick to get an immersive third-person view of your ride.Dual clamps, max stabilityNew design mounts below the seat and your bicycle's tail for an accessory you can trust.Flexible angle adjustment, multi-useGimbal-inspired design, allowing for freedom in how you shoot on two wheels.Easily switches via the Bike Seat Rail MountFreedom for how you want to shoot, either below the seat or full third-person.Compatibility Insta360 Ace Pro 2 Insta360 Ace Pro Insta360 Ace X4 X3 ONE X2 ONE X GO 3S GO 3 GO 2 ONE RS (Twin/4K) ONE R In the Box Bike Tail Mount Main Clamp Bike Tail Mount Clamp Bracket A Bike Tail Mount Clamp Bracket B Support Clamp 55mm M5 Bolts (2 pcs) 44mm M5 Bolts (2 pcs) Silicone Pads (2 pcs) Bike Seat Rail Mount Clamp Bracket Bike Seat Rail Mount Clamp 16mm M4 Bolts (2 pcs) 1/4" to 2-Prong Adapter (Upgraded) Thumb Screw (2 pcs) Hex Wrench Anti-Slip Rings (4 pcs)
The Insta360 X5 Lens Cap provides complete protection for your 360° lenses during storage and transport. The durable and lightweight cap fits snugly around your lenses, keeping out dust and scratches. Compatible with both Premium and Standard lens caps, providing even greater protection for any situation. Provides complete protection for your camera lenses Suitable for use with or without Premium/Standard lens caps
TELESIN motorcycle helmet mount for sports camerasThe Telesin mount is a practical solution for all motorcycle touring enthusiasts who want to capture perfect shots from the rider's perspective. Thanks to its universal design, it adapts to different types of helmets, providing a stable and secure mount for a sports camera or smartphone.Angle adjustmentThe Telesin GP-HBM-MT2-YH features an innovative design with a 180° swivel and folding capability, allowing you to precisely adjust the angle of the camera. As a result, each recording will not only be smooth and clear, but also taken at the most convenient angle for capturing dynamic action.Reliable stabilityIn order to ensure maximum stability, the grip is equipped with a thicker layer of silicone enriched with fine anti-slip tabs. Such a solution brilliantly nullifies shocks and improves grip, so that the recorded image is clear and the grip firmly holds onto the helmet even at high speeds.Secure attachmentAnother advantage is the high-quality adhesive tape, which provides an exceptionally strong connection to the surface of the helmet. This means you can travel without worry, confident that your camera or phone will stay in place at all times.Includedmountscrew ManufacturerTelesinModelGP-HBM-MT2-YHWeight81.3 gMaterialnylon, silicone, stainless steelCompatibilityGoPro, DJI Osmo Action/Pocket, Insta360, smartphones (Android, iPhone)
Kaitse oma instax mini LiPlay kaamerat stiilselt ja kindlalt. Vutlaril on võrguga sisekiht, mis hoiab kaamera kindlalt paigal, ning sobivas toonis randmerihm mugavaks kaasaskandmiseks. • loodud instax mini LiPlay jaoks • sisemine võrkvooder turvaliseks hoidmiseks • randmepael mugavaks kandmiseks • kerge ja stiilne disain
3-in-1 tempered glass for GoPro Hero 13 Black Telesin (S6-FLM-07-TGP)The set includes three tempered glasses for GoPro Hero 13 - for the front screen, rear screen and lens. With a precise fit and 9H hardness, they effectively protect against scratches, dirt and minor impacts, ensuring maximum safety of the device in all conditions. The accessories also do not affect the comfort of the camera or the image quality.Resistance to damageThe high quality of the material and 9H hardness make the glass effective in protecting against mechanical damage - perfect for outdoor use. Take care of the safety of your camera and do not worry that something will go wrong!Convenient handling, great image qualityTelesin tempered glass has a light transmission of 99%, which guarantees the preservation of the original image quality and vivid colors. The electrostatic adsorption technology facilitates a seamless installation, eliminating air bubbles, and thanks to the 2.5D design, the edges of the accessory are gently rounded, enhancing the comfort of use and giving an elegant look. What's more, the precise fit to the camera screens ensures that the glass does not affect touch sensitivity.IncludedTempered glass for the front screenTempered glass for the rear screenTempered glass for the lens ManufacturerTelesinNameFor Hero 13 tempered filmModelS6-FLM-07-TGPMaterialTempered glassDimensions of glass for front screen40 mm × 30 mmLens glass dimensions27.5 mm × 27.5 mmDimensions of glass for rear screen62.4 mm × 41.4 mmHardness9HCompatibilityGoPro Hero 13
Sunnylife waterproof case for DJI Osmo Action 4/ 3The Sunnylife OA3-FS519 waterproof housing is an indispensable accessory for diving and underwater photography enthusiasts. Thanks to its rugged design, it allows the camera to be safely submerged to a depth of up to 40 meters, providing a tight seal and waterproof protection.Durability and protectionMade of durable PC plastic, stainless steel and tempered glass, this housing effectively protects the camera from shocks, scratches and other damage. It is corrosion-resistant, ensuring long-lasting durability even in the most demanding conditions. At the same time, it is very easy to install and has cold-shoe adapters that allow you to easily and quickly attach additional accessories. ManufacturerSunnylifeNameWaterproof Case for Osmo Action 3ModelOA3-FS519MaterialPC + stainless steel + tempered glassWeight71 gCompatibilityDJI Osmo Action 3
