Multiport USB-C 10Gbps hub AXAGON HMC-6GM2 GEN2COMBO 6in1 expands your laptop, computer or phone with five ports and external box for M.2 disk. You can easily and quickly connect up two USB devices, SD card reader, one monitor, and an NVMe or SATA M.2 SSD to your computer via the reversible USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a simple and compact 6in1 docking station for notebook like MacBook Air or Pro. The USB hub offers two USB 10Gbps outputs. One with standard USB-A and one with USB-C data connector. The hub can also handle permanent connection of two external drives simultaneously. Thanks to the fast USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10Gbps. Another USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port and above. You can connect a NVMe or SATA M.2 SSD drive thanks to the built-in slot on the back. The multiport hub thus becomes an external drive. M.2 cards can be single-sided or double-sided up to a size of 22x80 mm. The external M.2 box has no capacity limitations for SSDs and supports modern functions such as TRIM, UASP and enables reading S.M.A.R.T. disk status monitoring information. Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. Thanks to the high-speed USB interface, you can make the most of the potential of modern memory cards. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. You will also be pleased with the finely textured surface, which does not leave fingerprints. The port replicator is the ideal accessory for laptops with a lack of USB connectors, memory or video outputs. Fixed USB-C cable 20 cm long. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: USB 10Gbps (USB 3.2 Gen2). Compatible with Thunderbolt 3 and 4. Connection via reversible USB type C male connector on a fixed 20 cm cable. USB outputs: 1x USB 10Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. 1x USB Power Delivery 100W (only for charging), USB-C female connector. USB-C hub handle the connection of two external drives simultaneously. HDMI output: 1x HDMI A port, HDMI A female connector. Video resolution and properties: Maximum supported resolution 4K / 4096 x 2160 at 60 Hz. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Supports up to 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio formats. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub Maximum power supply power via PD USB-C hub output 100W - 20V/5A Required PD support from the device (laptop, phone) and a suitable PD wall charger The card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash. SD slot: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. M.2 SSD slot: NVMe & SATA M.2 SSD disks. Designed for M key or B+M key format cards. NGFF 75-pin M-key slot for M.2 drives. Supports M.2 drives with a size of 2242, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Support of TRIM functionality to limit gradual degradation of the SSD performance over time. Support for booting from an SSD in the hub's M.2 slot. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0). Supports transmission rates 10.000 / 5.000 Mbit/s. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub and M.2 disk operation is better dissipated and transferred to the surroundings. The LED indicates the data transfer of the M.2 drive. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 149 x 65 x 17 mm. Weight 178 g (incl. cable). USB cable length 20 cm. Supported operating systems: Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 20 cm long cable mounting material multilingual manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA packed in a cardboard box
Tüüp:Spetsialiseeritud (ühe pistikuga); Sülearvuti bränd:Mitu kaubamärki; Väljundpinge:5 V / 3 A, 9 V / 3 A, 12 V / 3 A, 15 V / 3 A, 20 V / 3.25 A (PD 65 W); Väljundvool:3 - 3.25; Väljundvõimsus:65
Now there is one link combination lock that does it all. The universal 3-in-1 laptop combination lock fits any standard, nano and wedge laptop security slot, helping to future-proof your locking solution. A 4-digit resettable dial with 10,000 possible combinations and a carbon steel cable provide strong protection against theft attempts. Additional features include Register & Retrieve for quick, safe and easy combination searches; and a five-year warranty from Kensington, the inventor and world leader in laptop security locks. All Kensington locks are verified and tested for durability, physical strength and mechanical resistance. One slot lock fits standard, nano or wedge laptop security slots, regardless of brand or generation, helping to future-proof your locking solution. The zipper tips can be easily changed; tether keeps unused locking bits handy. The resettable 4-digit dial offers 10,000 possible combinations and the ability to easily change the code. 1.8 m long carbon steel cable in a plastic sheath ensures cut and theft resistance. Register & Retrieve, Kensington's online registration program, allows you to download combinations quickly, securely and free of charge. Kensington locks are verified and tested. Each lock is precision engineered to meet or exceed rigorous industry standards for strength, physical strength and mechanical resistance. A five-year warranty means you can rest easy knowing you're protected by Kensington, the inventor and world leader in laptop security.
Currently device manufacturers use three different lock slot formats. Thanks to this Universal Security Cable Lock with exchangeable heads your lock will suit all kinds of devices equipped with an anti-theft port. Notebooks as well as projectors, monitors and printers can be effectively secured with the DICOTA locking system. The T-Lock head is for 3 x 7 mm slots, the Wedge for 3.2 x 4.5 mm slots, and the Nano for 2.5 x 6 mm slots. Long-lasting. Thanks to the easy-exchange heads, you will be able to change your devices in the future and still use the security lock. Thanks to the push-to-lock function, the lock can be secured without a key using one hand. It's quick, simple and reliable. The sheathed multi-strand steel cable is 2 m long and extra strong with a diameter of 4.4 mm. The functional Velcro strap allows the cable to be rolled up for compact storage and transportation. Two keys are included as standard. This lock is a standalone version and cannot be integrated into a larger locking system. *Wedge, T-Bar and Nano Security Slot are trademarks of a third party without a connection to DICOTA SCHWEIZ AG.
An ideal solution for sterile storage and charging of portable devices via USB-A connectors with the possibility of data synchronization The DIGITUS mobile charging cabinet is the ideal and compact solution for storing and charging mobile devices such as notebooks and tablets. Mobile charging cabinets are often used in public facilities such as schools to safely store devices in one place and also charge them at the same time. The cabinet contains 3 rows of 10 chargers, each with its own USB port on the front. Additionally, devices can be connected at the rear using built-in socket strips (3 x 10-way with protective contact). Thanks to large cable guides and long shelves, optimal cable management is ensured. Built-in fans (3 x 24 V) combined with ventilation slots ensure active cooling of the cabinet. Integrated UV-C lamps ensure sterile conditions, and therefore ecology and better hygiene. The device can be connected to an external USB port to perform centralized data synchronization. 30 places (3 x 10) for devices 30 x USB A connectors USB A port output capacity: 10W (5V 2.1A) per port; max. 300 W 3 x rear socket strip (10 x socket with protective contact, complete with switch) Cable guide and space for excess cables on each level Compact housing, mobile thanks to mounted wheels 3 x fans (24 V) for active cooling of the cabinet The fans start automatically when the inside temperature exceeds 40°C With 30 mA residual current circuit breaker Double doors front and rear Pressure locking system with handle on front and rear doors, lockable Door opening angle 180° 2-point locking (bar lock) 4 castors (2 with brakes) Handles for easy movement (included) Protective contact connection (AC) with switch on the side C20 connector on the side of the cabinet The product is delivered assembled Inner shelf depth: 415 mm (suitable for devices up to 15.6") The wheels can be removed if necessary
HP L41856-001. Otstarve: Sülearvuti, Toite tüüp: Hoonesisene, Väljundvõimsus: 120 W. Toote värv: Must. Kaal: 364 g. Kogus pakis: 1 tk, Pakendi laius: 244 mm, Pakendi sügavus: 180 mm
Trust Maxo 100W 4-port USB lauapealne laadija on mõeldud mitme seadme samaaegseks laadimiseks, pakkudes mugavust ja efektiivsust. Sellel on kolm USB-C porti ja üks USB-A port, mis võimaldab laadida sülearvuteid, telefone ja tahvelarvuteid korraga. Laadija kompaktne disain ja 50% taaskasutatud plastikust valmistamine muudavad selle keskkonnasõbralikuks valikuks igasse ruumi. • 3 USB-C porti ja 1 USB-A port • 100W väljundvõimsus • 50% taaskasutatud plastikust
The Acer ACG-DCK-C-1 docking station is designed for versatility and efficiency. With multiple expansion slots including SD and microSD memory card types, users can easily enhance their storage options. This docking station features a variety of interfaces, such as USB 3.1, USB-C with Power Delivery, HDMI, and VGA, allowing users to connect a wide range of devices seamlessly.Equipped with a 100-watt power supply, the Acer docking station ensures adequate power for connected devices while complying with USB Battery Charging Specification Rev. 1.2 and USB Power Delivery 3.0 standards. Ideal for home or office setups, this docking station facilitates efficient connectivity and productivity, making it an essential accessory for any device setup.
AXAGON HMC-KB-NRD KEYBOARD hub turns your phone, tablet or mini-laptop into a full-fledged computer workplace. You connect your mobile device to the 9in1 docking station via the supplied 60 cm long cable. In no time, you have an integrated keyboard, SD and microSD card reader, and connectors for connecting an external monitor, three USB devices, headphones or headset, and Power Delivery power. However, it is necessary that the USB-C port of your mobile device supports video output (DisplayPort Alternate Mode) and Power Delivery. The keyboard, built into an elegant aluminum hub body, is equipped with chiclet keys with a scissor mechanism and 2 mm stroke for precise and quiet typing. The keyboard offers adjustable backlighting in 5 levels, 12 multimedia keys and the possibility of increasing the inclination for comfortable and ergonomic use. Of course, the keys are printed with Nordic localization. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/120Hz Quad HD or 1080p/200Hz Full HD and the transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts without limitations. Three USB-A 5Gbps outputs allow connection of external drives (up to 2 at the same time), flash drive, mouse, printer and other USB accessories. The USB ports also charge mobile phones and tablets with a power of up to 7.5W. The memory card reader supports reading and writing of all versions of SD and microSD cards with a capacity of up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The 3.5 mm audio output offers the possibility of connecting stereo headphones, a headset or active speakers. The PD USB-C input is designed for a suitable Power Delivery charger. This allows both your mobile device and the hub to be powered directly from the PD charger using Power Delivery 3.0 technology with up to 100W of power. The Multiport Hub with Keyboard is especially ideal for users of phones and tablets Samsung's DeX-enabled Z-series Fold (from Fold3), Galaxy S (from S9), Note (from Note8) and Galaxy Tab S (from S4 except Lite and FE versions). The Dock also enables desktop mode for the Apple iPad Pro and iPad Air (from 2022) tablets. In addition, it ensures compatibility with iPad mini (from 2021) and with iPhone 15 Pro / Pro Max phones, while the image is transferred via mirroring. Input (connection to mobile device / computer): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W port (only for charging), USB-C female connector. Powering the mobile device from the mains adapter via the USB-C hub. PD power must be supported by both the mobile device and the mains charger. USB outputs: 3x USB 5Gbps port, USB-A female connector. USB-C hub handle the connection of two external drives simultaneously. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports. Video output: 1x HDMI A port, HDMI A female connector. 4K / UHD resolution 4096 x 2160 at up to 60Hz. 2K / QHD / WQHD resolution 2560 x 1440 at up to 120Hz. 1080p / FHD resolution 1920 x 1080 at up to 200Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit/RGB support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. mobile device/computer and TV/monitor/AV receiver. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. UHS-I support. Speed up to 104 MB/s. Support hardware ECC function and CRC function. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. Audio output / input: 1x 3.5 mm 4pin jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Keyboard: Keys with scissor mechanism and 2 mm stroke for precise and silent typing. 12 multimedia keys: home, search, brightness, stop / start play / pause, previous / next track, mute, volume, backlight. White key backlight with four intensity settings and backlight off (f12). Switch between OS: fn+S for Windows / Android, fn+A for macOS / iPadOS / iOS. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. The LED indicates with constant light the hub connection to the computer. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 296 x 128 x 11 / 6 mm. Weight 353 g (without cable). USB-C cable 60 cm long with connectors C-M straight / C-M bent 90°. Supported operating systems: Microsoft Windows 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C Keyboard hub, USB-C cable 60 cm long, Keyboard hub travel bag, self-adhesive rubber pads to increase the inclination of the keyboard, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box.
Vention 15-in-1 USB-C MST Docking Station 4K@60Hz Ultra HD Display Standard 5Gbps Transmission Speed Organized Desktop Space 100W PD Charging While in Use Port Expansion No Need for Constant Plugging and Unplugging Compatible with Multiple Systems Plug and Play Rotating Detachable Stand
Turn your laptop into a dual-display workstation wherever you go. Compact, lightweight, and built for performance, this sleek dock lets you expand your workspace wherever you are. With two HDMI ports, you can connect up to two 4K monitors for stunning visual clarity. Stay seamlessly connected with Gigabit Ethernet and plug in all your essential peripherals—from mice and keyboards to flash drives and external hard drives—via USB-A and USB-C ports*. For maximum efficiency, simply plug your laptop’s power charger into one of the USB-C ports to keep your device powered while you work. Crafted with recycled materials, this tiny yet mighty dock is the smart, sustainable choice for eco-conscious professionals who demand performance without compromise. *One of the USB-C ports can serve as either a 10Gbps data port or a power pass-through port. ** Dual extended video is available for MST devices only. Non-MST devices like Mac or iPad will only mirror. ***140W charging requires a compatible host machine supporting PD3.1 Extended Power Range (EPR). PD 3.0 Power Delivery up to 100W for compatible hosts. Dual Video Support Unlock a rich, ultra-high-definition viewing experience with dual HDMI ports that support up to 4K resolution – whether you're using a single display or going full dual-screen*. Perfect for multitaskers, creatives, and anyone who thrives with more screen real estate. Amped up Charging Power your high-performance laptop with up to 140W PD EPR Power Delivery pass-through**, this dock keeps your USB-C laptop charged and ready by simply connecting your laptop’s power adapter to the dock’s USB-C port. Ideal for devices with limited ports – no compromises, just seamless power. Perfectly Portable Slim, lightweight, and built for mobility, this dock is perfect for hybrid professionals, frequent travellers, and those always-on-the-go. With a combination of two USB-C and two USB-A ports, it’s ready to keep you connected and productive. Plug and Play Simplicity No software. No hassle. Just plug into your USB-C device and instantly connect to a wired network, multiple peripherals, and fast data transfer. It’s streamlined connectivity at its best. Eco-Friendly Exterior Made with 75% recycled post-consumer plastics and aluminium, this EcoSmart™ dock combines outstanding performance with a commitment to sustainability, contributing to a greener future without compromising on speed or reliability.
Hama universaalne USB-C 65 W toiteadapter ühendab kompaktse korpuse, võimsa GaN-tehnoloogia ja laia ühilduvuse sülearvutite, tahvlite ja teiste USB-C seadmetega. Adapter kohandab väljundvõimsust automaatselt ning aitab kaitsta aku tervist, samas kui pööratav USB-C pistik tagab alati mugava ühenduse. • 65 W väljund võimsa GaN-tehnoloogiaga • Automaatne seadmetuvastus optimeeritud laadimiseks • Sobib sülearvutitele, MacBookidele, tahvlitele, telefonidele ja konsoolidele • Kompaktne ja kerge, toetab ülemaailmset pingestandardit
Sobib mudelitele: DELL Inspiron 1150, Inspiron 1420, Inspiron 1501, Inspiron 1520, Inspiron 1521, Inspiron 1525, Inspiron 1720, Inspiron 300M, Inspiron 500m, Inspiron 6000, Inspiron 600m, Inspiron 630m, Inspiron 6400, Inspiron 640m, Inspiron 700m, Inspiron 710m, Inspiron 8500, Inspiron 8600, Inspiron 9200, Inspiron 9300, Inspiron 9400, Inspiron E1405, Inspiron E1505, Inspiron E1705, Latitude 100L, Latitude D400, Latitude D410, Latitude D420, Latitude D500, Latitude D505, Latitude D510, Latitude D520, Latitude D530, Latitude D531, Latitude D600, Latitude D610, Latitude D620, Latitude D630, Latitude D630c, Latitude D631, Latitude D800, Latitude D810, Latitude D820, Latitude D830, Latitude E4300, Latitude E5400, Latitude E6400, Latitude X1, Latitude X300, Latitude XT TableM70, Precision Workstation M20, Precision WorkStation M60, Precision Workstation M70, Procision M4300, Studio 15, Studio 1535, Studio 17, Studio 1735, Vostro 1000, Vostro 1310, Vostro 1400, Vostro 1500, Vostro 1510, Vostro 1710, XPS M1210, XPS M140.
Colour Black|Unit Net Weight 0.29 kg Colour Black Width 124,8 mm Height 31,5 mm Depth 50 mm Shipping box quantity 6 Unit Brutto Volume 0,00202 cubm Unit Net Weight 0,29 kg Unit Gross Weight 0,633 kg
US434ATEN US434 is a 4-port USB 3.0 peripheral sharing device that allows users to share four USB devices between 4 different computers. US434 is USB 3.0 compliant, which can support data transfer rate up to 5Gbps and backwards compatible with USB 2.0 and USB1.1. It is perfect for high-bandwidth devices, such as USB docking stations or HD cameras.In addition, US434 also features an external remote port selector that can simplify desktop layout, and select which computer needs to use the USB devices. With its compact and all-in-one design, you can create a space saving, convenient and productive work environment.Ethernet LANEiKontrollitavate arvutite arv4Klaviatuuri pordi tüüpUSBHiire pordi tüüpUSBDC-pistikJahKonsooliosadUSB BUSB-pistmiku tüüpUSB Type-A,USB Type-BToote värvMustLED-indikaatoridJahMaterjalPlastSisseehitatud ekraanEiUSB versioon3.0 (3.1 Gen 1)Kasutamistemperatuur (T-T)0 - 40 °CHoiustamistemperatuur (T-T)-20 - 60 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 80 protsentiRoHS-vastavusJahLaius36,6 mmSügavus93,7 mmKõrgus26,8 mmKaal130 g
MicroSaver 2.0 Keyed Laptop Lock The smallest and most durable Kensington lock for laptops and other devices Low profile (10 mm) locking head with swivel and twist capability for easy attachment System with a 5 mm key Hidden Pin technology reduces the risk of unauthorized opening T-Bar lock technology included with the standard Kensington Security Slot The Register & Retrieve program ensures quick and easy replacement of lost keys
