Tootja: Natec Tootegrupp: arvutite toiteplokid (toiteplokk, kaablid) Toote liik: toiteplokk ühenduse tüüp: AC Power Lisaandmed: Power 90W, pingevahemik Lisavõimalused: tips:, 18,5V 7.4X5.0MM HP, 18,5V 4.8X1.7MM HP/ASUS, 19V 5.5X1.7M M TOSHIBA/ACER, 19V 5.5X2.5M M IBM/ASUS/DELL/TOSHIBA, 19V 4.0X1.35MM ASUS, 19.5V 7.4X5.0M M DELL, 20V 7.9X5.5M M IBM/LENOVO, 20V 11.0X4.6MM LENOVO värv: must laius: 60 mm kõrgus: 33 mm pikkus: 142 mm
AXAGON CRE-SM3SD FlatReader on kompaktne ID-kaardilugeja, millel on USB 2.0 liides ja täiendavaid pesad SD-, microSD- ja SIM-kaartide lugemise jaoks. Lugeja toetab kõiki tavalisi kontaktsete nutikaartide vorminguid, kiipkaarte ja muid kaarte, sealhulgas kontaktseid pangamaksekaarte või kontaktseid elektroonilisi ID-kaarte. Lugeja on ühilduv enamiku riiklike eID (elektrooniliste ID-kaartide) rakendustega. Tänu SIM-kaardi pesale, mis sisaldab SIM-haldustarkvara, SD- ja microSD-kaardi pesadele, saab lugejat kasutada ka varundamiseks ja andmete ülekandmiseks.
Multiport USB-C 3.2 Gen 1 hub AXAGON HMC-6GL. Input:
1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector.
Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 connector. Compatible with Thunderbolt 3. Input USB type C male connector on fixed 20 cm cable.
USB outputs: 3x SuperSpeed USB port, USB-A female connector. 1x USB type C Power Delivery port (only charging) USB-C female connector. Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 1 interface used (theoretical-ly up to 5 Gbit/s).
USB-C hub can handle connection of several external drives simultaneously. Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.1A at 5V (depending on the capabilities of the computer's USB port).
HDMI output: HDMI A (F) female connector.
Maximum supported resolution 4K / 4096 x 2160 at 30 Hz.
WQHD resolution 2560 x 1440 at 60 Hz max. FullHD resolution 1920 x 1080 at 60, 100, 120 Hz max. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. At the same time, support from the device (laptop, phone) and the operating system is necessary. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signaling) support. Full HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio format support. Sample rate up to 192 kHz and 24bit audio support depends on source and target device i.e. notebook/phone and TV/display/AV receiver. RJ-45 Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s.
The NewStar NSLS085SILVER is a universal stand for laptops from 10" up to 17", with a maximum weight capacity of 5 kg. The stand has six different height positions and a ultra-slim folding design. The lightweight, compact design makes the stand ideal to take with you wherever you want. The open configuration ensures good ventilation of the laptop and the anti-skid silicon pads and safety ledge stopper ensure solid positioning.
SmartFit Easy Riser Black SmartFit System lets you adjust height of the screen and angle of the laptop to your personal comfort colour Increases air circulation to keep your laptop cooler, easing strain on the components and battery Padded inserts provide a secure, stable fit and keeps your laptop in place Up to 50 degree tilt angle Folds flat to travel easily Fits notebooks 12" to 17"
The new Mitsu laptop power supply is equipped with a ferrite filter and excellent protection against overvoltage, overheating, overload and overcharging. Laptop chargers are aimed at the most demanding users, who appreciate stress-free and comfortable work. The quality of the product is confirmed by the following certificates: CE, ROHS, FCC and strict quality control eliminating possible defects.QUALITY BEFORE EVERYTHINGTemperature resistance - The influence of high and low temperatures on the resistance of the protection systems and the electrical parameters of the PSU is tested. Electrical test - Testing the correctness of electrical connections between individual components of the PSU. Short-circuit and over-voltage test - The reaction of the PSU protection systems due to a short circuit and a sudden voltage jump simulated by supplying a high-voltage pulse at the input of the PSU is tested. Final test - The output voltage level of the UPS is tested by subjecting it to an hour-long continuous load.
Control the temperatures with Natec OrioleNatec Oriole is a rugged cooling stand dedicated to 17.3" laptops. Its high efficiency is the result of having 3 fans. There are also many features that make it easy to adjust it to your own expectations. Fan speed control? Adjustable degree of inclination? With Natec Oriole it is possible. And this is just the beginning. Built to fight temperaturesNatec Oriole is here to deal with the high temperatures of your laptop. Adequate cooling is ensured by 3 efficient 120mm internal fans. What's more, thanks to the three-stage speed control, you can easily adjust the stand to your style of operation, regardless of whether you are interested in exciting gameplay or work. Bet on silence and reduce fan speed to a minimum. Deal with temperatures and force the fans to work at maximum speed. It's all up to you. Work the way you likeDo you want to adjust the Natec Oriole stand to your needs? You can do it easily with 7-step tilt angle adjustment. You also don't have to worry about stability. Non-slip elements located on the bottom of the stand will give stability in any situation and on any surface. With Natec Oriole your laptop feels safe. Convenient power supplyForget about the extra power supply. Natec Oriole is powered by one of two built-in USB-A ports, all via a dedicated, included cable. And if you want to power the stand using the USB-C port, you can also do it easily. In the set you will find a special adapter that will allow you to connect it. Proven materialsWhilst the fans are responsible for cooling your equipment, further heat dissipation would not be possible without a perforated metal panel. Thanks to this, the pumped air flows through the stand without resistance, guaranteeing quick cooling of the laptop. In addition, the metal panel performs one more function - it provides high durability. All this so that you can use the stand for years. Make your device stand outNatec Oriole will be perfect for your desk, no matter what you do. This is possible not only thanks to the elegant design, but also due to illuminated fans which will emphasize the design of any laptop with a delicate blue glow. Gaming? Business? It doesn't matter what you use your laptop for. With Natec Oriole it will look phenomenal every time.
GO Superior Upgrade your drive Large HD touch screen Trusted TomTom world maps High performance and responsiveness Fast map updates via Wi-Fi NEW Enhanced Visual Cues NEW Avoid Low Emission Zones NEW USB-C Moving lane guidance
Control the flow while maintaining optimal performance utilizing smart-pin technology, drawing only minimal power when not in use, and helping provide reliable surge protectionProtect your cable and improve cable manageability. The new right-angled (90°) 4.5mm connector allows access in tight spaces and takes stress off the cord by reducing bending
The NewStar NS-WS050BLACK is a universal lightweight sit-stand workstation with ultra-flat design and a maximum weight capacity of 8 kg. The sit-stand workstation has five height settings, to enable the perfect ergonomic working position for everyone. Due to the lightweight, low profile design, the workstation can be easily picked-up and moved when needed. The steel frame and helical spring ensure solid positioning and optimal comfort
The 12-in-1 USB Type-C docking station allows you to connect multiple devices to your notebook or PC, including 2x USB-C, 2x USB-A 3.0, 2x USB-A 2.0, 2x HDMI, DP 1.4, SD/microSD card reader, and Gigabit LAN. You can extend or mirror your display on up to three monitors with a resolution of up to 3840x2160/60 Hz. The USB 3.0 ports enable data transfer rates of up to 5 Gbps, and the LAN (RJ45) interface provides high-speed internet access. Additionally, connected devices can be charged with up to 100 W via an optional USB-C charger. The docking station is compatible with Windows and macOS and is suitable for MacBook, iPad Pro, Huawei MateBook X, Dell XPS 13, ThinkPad, Chromebook, and other devices.
Baseus Digital LED Display Gen 2 Wireless Charger 15W Black. Model name CCED000001 Type Wireless, Output power capacity, W 15 Watts Colour Black, Weight 0.141 kg
Multiport USB-C 10Gbps hub AXAGON HMC-12GM2 GEN2COMBO 12in1 expands your laptop, computer or phone with eleven ports and external box for M.2 disk. You can easily and quickly connect up to two monitors, four USB devices, a Gigabit Ethernet network, headphones, an SD card reader, and an NVMe or SATA M.2 SSD o your computer via the reversible USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a simple and compact 12in1 docking station for notebook like MacBook Air or Pro. The USB hub offers three USB outputs with standard USB-A connectors. Two with 5Gbps speeds and a third with 10Gbps speeds for more demanding devices. It also offers a USB-C 10Gbps data connector. The hub can also handle permanent connection of two external drives simultaneously. Thanks to the fast USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10Gbps. The second USB-C connector is reserved only for powering and simultaneous charging of laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI and DisplayPort outputs provide a high-quality picture. Whether used alone or simultaneously, the ports offer resolutions up to 4K/60Hz Ultra HD and support multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port and above. You can connect a NVMe or SATA M.2 SSD drive thanks to the built-in slot on the back. The multiport hub thus becomes an external drive. M.2 cards can be single-sided or double-sided up to a size of 22x80 mm. The external M.2 box has no capacity limitations for SSDs and supports modern functions such as TRIM, UASP and enables reading S.M.A.R.T. disk status monitoring information. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card.Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. Thanks to the high-speed USB interface, you can make the most of the potential of modern memory cards. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. Active cooling is provided by a silent integrated fan, which cools both the M.2 disk and the body of the hub itself. You will also be pleased with the finely textured surface, which does not leave fingerprints. The port replicator is the ideal accessory for laptops with a lack of USB connectors, memory or video outputs. The 50 cm USB-C cable is detachable and can be replaced with a longer cable if needed. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: USB 10Gbps (USB 3.2 Gen2). Compatible with Thunderbolt 3/4. Connection via reversible USB type C female connector. USB outputs: 1x USB 10Gbps port, USB-A female connector. 2x USB 5Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. 1x USB Power Delivery 100W (only for charging), USB-C female connector. USB-C hub can handle the connection of two external drives simultaneously. Video outputs: 1x HDMI A port, HDMI A female connector. 1x DP port, DisplayPort female connector. Video resolution and properties: Maximum supported resolution when each port is connected individually is 4K / 4096 x 2160 at 60 Hz. 2 simultaneously connected monitors - up to 4K/60Hz on both monitors. For proper video output function, the hub must be plugged into a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) version 1.4 or higher, or a USB-C port with Thunderbolt 3/4 support. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Supports up to 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio formats. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 100W - 20V/5A. Required PD support from the device (laptop, phone) and a suitable PD wall charger. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x / 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. Copying from card to card. M.2 SSD slot: NVMe & SATA M.2 SSD disks. Designed for M key or B+M key format cards. NGFF 75-pin M-key slot for M.2 drives. Supports M.2 drives with a size of 2242, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Support of TRIM functionality to limit gradual degradation of the SSD performance over time. Support for booting from an SSD in the hub's M.2 slot. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Support IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminats the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN function in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, ECMA-393 proxZzzy for sleeping hosts, RealWoW! and also Link Change Wake-up. Advanced Power Management features: The adapter supports advanced power management and supports advanced power saving e.g. when the Ethernet cable disconnection. Supported Power Management technologies are e.g. Advanced Configuration Power management Interface (ACPI), Link Power Management (LPM) or IEEE 802.3az EEE (Energy Efficient Ethernet) and others. Audio output / input: 1x 3.5 mm jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0). Supports transmission rates 10.000 / 5.000 Mbit/s. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub and M.2 disk operation is better dissipated and transferred to the surroundings. The LED indicates the data transfer of the M.2 drive. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 149 x 65 x 17 mm. Weight 178 g (incl. cable). USB cable length 50 cm. Supported operating systems: Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub USB-C cable 50 cm long mounting material multilingual manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA packed in a cardboard box
The NewStar NSLS010 is a universal stand for laptops from 11" up to 17", with a maximum weight capacity of 5 kg. The stand has six different height positions and a ultra-slim folding design.
i-Tec - dokkimisjaam - USB4 / Thunderbolt 4 - HDMI, DP - GigE Product Type: dokkimisjaam Docking liides: USB4 / Thunderbolt 4 Video liidesed: HDMI, DP mõõtmed (WxDxH): 12.8 cm x 6.9 cm x 4.8 cm kaal: 314 g värv: must Localisation: Europe võrguseadeing: Gigabit Ethernet Power: Power adapter 112 vatti Manufacturer Warranty: 2-year garantii
The NewStar NSLS085BLACK is a universal stand for laptops from 10" up to 17", with a maximum weight capacity of 5 kg. The stand has six different height positions and a ultra-slim folding design. The lightweight, compact design makes the stand ideal to take with you wherever you want. The open configuration ensures good ventilation of the laptop and the anti-skid silicon pads and safety ledge stopper ensure solid positioning.
AXAGON CRE-S3 SUPERSPEED on alumiiniumist valmistatud kolm-ühes mälukaardilugeja, mis kasutab USB-A 3.2 Gen 1 liidest ja toetab kõiki hetkel kasutusel olevaid SD- ja microSD-kaardi versioone, sealhulgas SDXC ja microSDXC mälukaarte kuni 2 TB mahutavusega. Samuti toetab see kuni 128PT mahutavusega CF kaarte. Tänu kaasaegsele pööratavale USB-C ühendusele on lugeja lihtne ühendada sülearvuti või arvutiga, millel on USB-A ühendus. USB 3.2 Gen 1 (varasemalt USB 3.0) liidese tõttu saavutab lugeja märkimisväärselt kõrgemad andmeedastuskiirused võrreldes USB 2.0 liidesega lugejatega. UHS-II kaardid saavutavad kiiruseid kuni 156 MB/s (täis-duplex) või 312 MB/s (pool-duplex), toetus vanematele USH-I kaartidele (maksimaalne kiirus 104 MB/s) on loomulikult tagatud.
