Apple USB-C 140W Power Adapter on kõrge jõudlusega laadija, mis pakub kiiret ja efektiivset laadimist Sinu ühilduvatele MacBook Air või MacBook Pro seadmetele. Selle kompaktne disain ja võimas väljund muudavad selle ideaalseks valikuks nii kodus kui ka reisil olles. • 140W USB-C väljund • Kiire ja efektiivne laadimine • Kompaktne ja kaasaskantav disain
The Lenovo ThinkPad Smart Dock 7500 is designed to enhance productivity and connectivity. With robust interfaces, including multiple USB 3.2 Gen 2 ports, Thunderbolt 5, and support for dual video output with DisplayPort and HDMI, this docking station meets the demands of modern work environments. Its maximum resolution capability of 8K at 60 Hz allows for a visual experience suitable for detailed graphics and presentations. The device is housed in a brown box packaging and complies with various standards to ensure performance and safety in diverse settings.
The 12-in-1 USB Type-C docking station allows you to connect multiple devices to your notebook or PC, including 2x USB-C, 2x USB-A 3.0, 2x USB-A 2.0, 2x HDMI, DP 1.4, SD/microSD card reader, and Gigabit LAN. You can extend or mirror your display on up to three monitors with a resolution of up to 3840x2160/60 Hz. The USB 3.0 ports enable data transfer rates of up to 5 Gbps, and the LAN (RJ45) interface provides high-speed internet access. Additionally, connected devices can be charged with up to 100 W via an optional USB-C charger. The docking station is compatible with Windows and macOS and is suitable for MacBook, iPad Pro, Huawei MateBook X, Dell XPS 13, ThinkPad, Chromebook, and other devices.
USB‑C to MagSafe 3 2-meetrine laadimiskaabel tagab turvalise ja kiire ühenduse sinu Maci sülearvutile. Magnetiline ühendus juhib pistiku laadimisporti ning LED-indikaator näitab laadimise olekut. • Magnetiline MagSafe 3 ühendus • Kiirlaadimise tugi USB‑C toiteadapteriga • Punutud vastupidav disain • 2 m pikkus mugavaks kasutamiseks
Multiport USB-C 3.2 Gen 1 hub AXAGON HMC-6GL. Input:
1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector.
Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 connector. Compatible with Thunderbolt 3. Input USB type C male connector on fixed 20 cm cable.
USB outputs: 3x SuperSpeed USB port, USB-A female connector. 1x USB type C Power Delivery port (only charging) USB-C female connector. Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 1 interface used (theoretical-ly up to 5 Gbit/s).
USB-C hub can handle connection of several external drives simultaneously. Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.1A at 5V (depending on the capabilities of the computer's USB port).
HDMI output: HDMI A (F) female connector.
Maximum supported resolution 4K / 4096 x 2160 at 30 Hz.
WQHD resolution 2560 x 1440 at 60 Hz max. FullHD resolution 1920 x 1080 at 60, 100, 120 Hz max. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. At the same time, support from the device (laptop, phone) and the operating system is necessary. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signaling) support. Full HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio format support. Sample rate up to 192 kHz and 24bit audio support depends on source and target device i.e. notebook/phone and TV/display/AV receiver. RJ-45 Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s.
AXAGON HMC-UFO USB-C 10Gbps UFO hub expands your laptop, computer or tablet with eight ports and an external box for M.2 drive. You will connect your laptop to the 9in1 docking station via the supplied USB-C 65 cm long cable. In no time, you have an integrated slot for an NVMe or SATA M.2 drive, an SD and microSD card reader, and connectors for connecting a monitor, USB devices, headphones, network cable, and Power Delivery power. Thunderbolt 3/4 compatibility also gives you a simple and compact docking station for a laptop such as the Apple MacBook Air or Pro. For the hub to function properly, your laptop's USB-C port must support video output (DisplayPort Alternate Mode or Thunderbolt 3 and above) and Power Delivery powered. You can connect a NVME or SATA M.2 SSD via the built-in slot on the top of the hub. The multiport hub thus becomes an external drive. M.2 cards can be single-sided or double-sided up to a size of 22x42, 22x60 and 22x80 mm. The external M.2 storage has no SSD capacity limitations, supports TRIM and UASP, and allows reading of S.M.A.R.T. information to monitor disk status. The top cover of the M.2 slot is made of aluminum, which provides optimal protection and heat dissipation. Screwless mounting makes changing discs quick and easy. A passive heatsink is included to effectively help reduce the temperature of M.2 drives. The vents around the cover ensure sufficient air circulation, which also supports efficient heat dissipation. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD or 1080p/240Hz Full HD and the transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colors and contrasts. Two USB-A 10Gbps outputs allow connection of external drives, flash drive, mouse, printer and other USB accessories. The USB ports also charge mobile phones and tablets with a power of up to 7.5W. The Hub is also equipped with a combined USB-C port that can be used for data transfer (USB 5Gbps) or for charging a laptop using a Power Delivery charger. With the use of a suitable PD charger, you can power not only the laptop, but also the hub itself, with up to 100W of power, thanks to Power Delivery 3.0 technology. The memory card reader supports reading and writing of all versions of SD and microSD cards with a capacity of up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. You can use the 3.5 mm audio output to connect stereo headphones, headset or active speakers. It is equipped with a high-quality DAC converter, which supports sampling up to 384 kHz at 24 bits. You will enjoy superior sound quality that is ideal for lossless formats such as FLAC, WMA, WAV, APE, AAC and ALAC. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. Thanks to the clever design with four rubber pads on the base, the station stays firmly in place. One of the most practical features is the USB-C cable attachment, which is neatly wrapped around the base. Thanks to this solution, you can easily unwind exactly the length of cable you currently need, which prevents excess cable from taking up unnecessary space on your desk. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (connection to a computer or mobile device): USB 10Gbps (USB 3.2 Gen 2), USB-C male connector. Compatible with USB 5Gbps, USB4, Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 - 100W port, USB-C female connector. Powering the mobile device from the mains adapter via the USB-C hub. PD powering must be supported by both the mobile device and the mains charger. USB outputs: 2x USB 10Gbps port, USB-A female connector. 1x USB 5Gbps port for data transfer or Power Delivery charging, USB-C female connector. Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports. Video outputs: 1x HDMI port, HDMI A female connector. Maximum supported resolution: 1 monitor - up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz. To achieve maximum resolution and frequency values on video outputs, the dock must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 4. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High dynamic range, 10 bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.2 (High-bandwidth Digital Content Protection). Up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio format support. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and target device, i.e. laptop/phone and TV/monitor/AV receiver. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Audio output / input: 1x 3.5 mm 4pin jack for headset, headphones or active speakers, 2-channel analog stereo output 384 kHz @ 24 bit for playback, 192 kHz @ 24 bit analog microphone input for recording. M.2 SSD slot: NVMe & SATA M.2 SSD disks. Designed for M key or B+M key format cards. NGFF 75-pin M-key slot for M.2 drives. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Support of TRIM functionality to limit gradual degradation of the SSD performance over time. Support for booting from an SSD in the hub's M.2 slot. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus - USB bus power. Power supply via PD charger (not included). The alminum cover of the M.2 slot helps to better dissipate heat. Higher surface hub temperature is not a problem - the heat generated by the hub and M.2 disk operation is better dissipated and transferred to the surroundings. The blue LED indicates with constant light the hub connection to the computer. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 32 x 110 x 100 mm (H x W x D). Weight 213 g (incl. cable). USB-C cable 65 cm long for connecting the hub to a laptop. Supported operating systems: Microsoft Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 65 cm long cable, passive heatsink, 2 pcs thermal conductive pads, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / UA / BG / CN / TR / ARA, packed in a cardboard box.
ASUS Triple Display USB-C Dock DC300. Ühenduvustehnoloogia: Dokkimine, Hostiliides: USB 3.2 Gen 2 (3.1 Gen 2) Type-C, USB Power Delivery kuni: 90 W. Ethernet LAN-i andmeedastuskiirused: 10,100,1000 Mbit/s. Toote värv: Must, ...
7-in-1 DockingStationwith magnetic M.2 NVMe and SATA SSD enclosure and built-in cooling fanM.2 NVMe and SATA - This DockingStation combines powerful connectivity with fast external storage by integrating a high-speed M.2 NVMe and SATA SSD enclosure. Supporting capacities up to 8 TB, its a practical solution for handling large files, backups, or media librariesall from one compact, all-in-one device on your desk. Connectivity for Work and Play - Equipped with USB Type-C and USB Type-A (Gen 2) ports offering transfer rates up to 10 Gbit/s, this DockingStation handles fast data transfers with ease. It also features an HDMI port for 4K@60 Hz displays and SD/microSD slots supporting speeds up to 104 MB/s. Magnetic Attachment Features a magnetic cover that allows it to attach securely to the back of your phone or other compatible devices. This makes it incredibly convenient for users who need extra storage on the go Power Delivery 3.0 - Stay powered throughout the day with a USB Type-C PD-IN port that supports up to 100 watts of power delivery. Simply connect your USB Type-C power supply to keep your DockingStation and connected devices charged without needing extra adapters or cluttering your workspace. Operating System - Whether youre working on Windows, macOS, or Linux, this DockingStation fits into your existing setup. Its designed to work with a wide range of devices and system environments, so you can switch between workstations without worrying about compatibility or needing separate accessories for each system.
Lenovo ThinkPad USB4 Smart Dock 5500 represents the latest generation of docking solutions. The dock?s USB4 technology quadruples performance compared to the USB-C 3.2 Gen 2 standard. A 40 Gbps speed ensures you can connect, for example, one 8K@60Hz display or two 4K@144Hz displays to the dock. Declutter your workspace: with a single USB-C cable you can easily connect everything essential?displays, network, peripherals?and deliver power (max 100 W) to the host device. The cloud-based Lenovo Accessories Fleet Manager (LAFM) provides an effective modern management solution. It allows IT administrators to manage, update, configure, and diagnose docking stations easily, anytime and anywhere. The product is made of 90% recycled material and ships in plastic-free packaging. Top features Display ports: 2x DP 1.4, 1x HDMI 2.1, 1x USB-C 3.2 Gen2 (Full-Function DP 1.4) Other ports: USB4 (Connect to PC), 2x USB-A 3.2 Gen2 (1x AOU, 12 W), 2x USB-A 3.2 Gen2 (10 W), 1x USB-C 3.2 Gen2 (AOU, 7.5 W),1 Gbps RJ45 135 W Slim Tip power adapter with 100 W charging power Support for four external displays Maximum resolution with four displays: 3840x2160@60Hz Maximum resolution with two displays: 3840x2160@144Hz Maximum resolution with one display: 8K@60Hz Cable lock: NanoSaver and MicroSaver Certain functionalities (PXE boot, WoL, MAC address pass-through, dual power button) may not work with devices other than ThinkPad devices Management with the Lenovo Accessories Fleet Manager application In the box: Dock, 1 m USB4 cable (integrated), 135 W Slim Tip power adapter, power cord Dimensions: 218x80x31.5 mm Three year warranty Note! The real resolution will depend on your PC and Monitor capability. For details, see here
i-tec C31FLAT2PDPRO100W. Ühenduvustehnoloogia: Juhtmega ühendatud, Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-C, USB Power Delivery kuni: 100 W. Ethernet LAN-i andmeedastuskiirused: 10,100,1000 Mbit/s. Toote värv: Hõbe, Ühilduvad ...
Control the flow while maintaining optimal performance utilizing smart-pin technology, drawing only minimal power when not in use, and helping provide reliable surge protectionProtect your cable and improve cable manageability. The new right-angled (90°) 4.5mm connector allows access in tight spaces and takes stress off the cord by reducing bending
Superspeed USB-C 3.2 Gen 2 hub AXAGON HMC-5G2 SPEEDSTER 5H expands your laptop, computer or phone with five ports. You can easily and quickly connect up to four USB devices and HDMI display to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The hub will provide you with a simple and compact laptop docking station. The USB hub offers a total of four USB outputs - two with standard USB-A connectors and two with modern USB-C connectors. Thanks to the advanced USB 3.2 Gen 2 interface, you can connect high-speed devices such as NVMe M.2 external drives to all outputs at up to 2x higher speed 10 Gb/s compared to standard Generation 1 hubs with a speed of only 5 Gb/s. The hub can handle permanent connection of several external drives simultaneously and USB-C ports allow charging of phones and tablets with a current of up to 3A. One of the USB-C ports also allows you to use the Power Delivery function to power up a laptop or mobile phone via hub from a charger. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one port, which could be useful. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. The compact and slim aluminum body looks great and also ensures mechanical resistance and quality cooling. The finely structured surface with no fingerprint remains will also please you. The USB-C hub is an ideal accessory for laptops without USB-A connectors and video output such as the MacBook Pro. You can use your existing USB peripherals without having to buy new ones. Thanks to the Plug and Play and Hot Plug functions, the connection of the hub itself is very simple without complicated installation. It is also possible to easily connect and disconnect peripherals while the computer is running. The hub does not afraid of connection to phones with a USB-C connector - for example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: 1x USB 3.2 Gen 2 / SuperSpeed USB 10 Gbps port, USB-C male connector. Backward compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Compatible with Thunderbolt 3. Input USB type C male connector on fixed 13cm cable. USB outputs: 2x SuperSpeed USB 10 Gbps port, USB-A female connector. 1x SuperSpeed USB 10 Gbps port, USB-C female connector. 1x SuperSpeed USB 10 Gbps port for data transfer or Power Delivery charging, USB-C female connector. Supports transmission rates 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ / SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). USB-C hub can handle connection of several external drives simultaneously. Powerful mobile device charging in the USB-C ports by current up to 3A. HDMI output: HDMI. HDMI A (F) female connector. Maximum supported resolution 4K / 4096 x 2160 at 30 Hz. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Correct OS is also necessary. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signaling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Up to 8-channel LPCM audio, compressed audio (AC-3, DTC) and HBR audio format support. Sample rate up to 192 kHz and 24 bit audio support depends on source and target device i.e. notebook/phone and TV/display/AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the PD wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 60W - 20V/3A. Notebook or phone with Power Delivery charging support from the USB-C port and a suitable PD charger is necessary. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. Blue LED indicates computer USB port connection (steady light) or connection to Power Delivery charger (brighter light) High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 105 x 40 x 12 mm. Weight 60 g (incl. cable). USB cable length 13 cm. Supported operating systems: Microsoft Windows 10, Mac OS, Linux, Android and Chrome OS.Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Package contains: USB-C hub with fixed 13 cm long cable, printed installation guide in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.
Multiport USB-C 10Gbps hub AXAGON HMC-12GM2 GEN2COMBO 12in1 expands your laptop, computer or phone with eleven ports and external box for M.2 disk. You can easily and quickly connect up to two monitors, four USB devices, a Gigabit Ethernet network, headphones, an SD card reader, and an NVMe or SATA M.2 SSD o your computer via the reversible USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a simple and compact 12in1 docking station for notebook like MacBook Air or Pro. The USB hub offers three USB outputs with standard USB-A connectors. Two with 5Gbps speeds and a third with 10Gbps speeds for more demanding devices. It also offers a USB-C 10Gbps data connector. The hub can also handle permanent connection of two external drives simultaneously. Thanks to the fast USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10Gbps. The second USB-C connector is reserved only for powering and simultaneous charging of laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI and DisplayPort outputs provide a high-quality picture. Whether used alone or simultaneously, the ports offer resolutions up to 4K/60Hz Ultra HD and support multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port and above. You can connect a NVMe or SATA M.2 SSD drive thanks to the built-in slot on the back. The multiport hub thus becomes an external drive. M.2 cards can be single-sided or double-sided up to a size of 22x80 mm. The external M.2 box has no capacity limitations for SSDs and supports modern functions such as TRIM, UASP and enables reading S.M.A.R.T. disk status monitoring information. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card.Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. Thanks to the high-speed USB interface, you can make the most of the potential of modern memory cards. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. Active cooling is provided by a silent integrated fan, which cools both the M.2 disk and the body of the hub itself. You will also be pleased with the finely textured surface, which does not leave fingerprints. The port replicator is the ideal accessory for laptops with a lack of USB connectors, memory or video outputs. The 50 cm USB-C cable is detachable and can be replaced with a longer cable if needed. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: USB 10Gbps (USB 3.2 Gen2). Compatible with Thunderbolt 3/4. Connection via reversible USB type C female connector. USB outputs: 1x USB 10Gbps port, USB-A female connector. 2x USB 5Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. 1x USB Power Delivery 100W (only for charging), USB-C female connector. USB-C hub can handle the connection of two external drives simultaneously. Video outputs: 1x HDMI A port, HDMI A female connector. 1x DP port, DisplayPort female connector. Video resolution and properties: Maximum supported resolution when each port is connected individually is 4K / 4096 x 2160 at 60 Hz. 2 simultaneously connected monitors - up to 4K/60Hz on both monitors. For proper video output function, the hub must be plugged into a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) version 1.4 or higher, or a USB-C port with Thunderbolt 3/4 support. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Supports up to 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio formats. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 100W - 20V/5A. Required PD support from the device (laptop, phone) and a suitable PD wall charger. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x / 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. Copying from card to card. M.2 SSD slot: NVMe & SATA M.2 SSD disks. Designed for M key or B+M key format cards. NGFF 75-pin M-key slot for M.2 drives. Supports M.2 drives with a size of 2242, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Support of TRIM functionality to limit gradual degradation of the SSD performance over time. Support for booting from an SSD in the hub's M.2 slot. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Support IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminats the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN function in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, ECMA-393 proxZzzy for sleeping hosts, RealWoW! and also Link Change Wake-up. Advanced Power Management features: The adapter supports advanced power management and supports advanced power saving e.g. when the Ethernet cable disconnection. Supported Power Management technologies are e.g. Advanced Configuration Power management Interface (ACPI), Link Power Management (LPM) or IEEE 802.3az EEE (Energy Efficient Ethernet) and others. Audio output / input: 1x 3.5 mm jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0). Supports transmission rates 10.000 / 5.000 Mbit/s. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub and M.2 disk operation is better dissipated and transferred to the surroundings. The LED indicates the data transfer of the M.2 drive. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 149 x 65 x 17 mm. Weight 178 g (incl. cable). USB cable length 50 cm. Supported operating systems: Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub USB-C cable 50 cm long mounting material multilingual manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA packed in a cardboard box
USB-C Digital AV Multiport adapter lubab sul ühendada USB-C liidesega MacBook sülearvuti HDMI monitori või teleriga, ühe tavalise USB liidesega seadme ning USB-C laadimisjuhtme.
Lenovo GX20Z46271. Otstarve: Sülearvuti, Toite tüüp: Hoonesisene/hooneväline, Sisendpinge: 100 - 240 V. Toote värv: Must. Kaabli pikkus: 1,68 m, Laius: 118 mm, Sügavus: 77 mm. Kogus pakis: 1 tk, Kaablid kaasa arvatud: USB tüüp-C, ...
Next-generation, high-performance USB-C docking station that supports output to up to three external monitors at up to 4K high resolution. The docking station can be used with virtually all notebooks equipped with USB-C, USB4 and Thunderbolt 3/4 ports, while supporting all currently popular operating systems. A multitude of USB ports (including those supporting Gen 2 at speeds of up to 10 Gb/s), a reliable and fast connection to the corporate network thanks to the integrated LAN port and support for installation behind a monitor make this docking station the ideal companion for true professionals. Of course, it supports charging a laptop or tablet up to 100 W. Possibility to connect up to 3 external monitors in resolution up to 4K* Power delivery: up to 100 W 2 DisplayPort and 1 HDMI port available 7 USB ports: 2x USB-C (10 Gb/s) supporting BC 1.2 fast charging and 5x USB-A (1x Gen 2 (10 Gb/s) supporting BC 1.2 fast charging, 2x Gen 1 (5 Gb/s) supporting fast charging BC 1.2 and 2x USB 2.0) Gigabit Ethernet RJ-45 provides reliable, solid and fast Internet connectivity with support for 10/100/1000 Mbps speeds Combo jack for audio and microphone The Kensington lock provides protection against theft, especially in shared office spaces or public places The docking station's power switch allows for maximum energy savings The dock supports VESA mounting for convenient vertical installation behind a VESA-enabled monitor Supports Windows 10/11, macOS, iPadOS, Android, Chrome OS and Linux (with latest updates) * macOS does not support Multi Stream Transport (MST). Connecting two or more monitors to the macOS station will cause all monitors to display the same image.
The i-Tec CADUA4KDOCKPDB100 docking station combines versatility and power in an external solution designed for various needs. With a robust interface lineup that includes USB-C, HDMI, and DisplayPort, this docking station is perfect for enhancing productivity. It supports dual 5K resolution for clear and crisp visuals, making it ideal for tasks that require high-definition displays.Equipped with features such as wake on LAN, an on/off switch, and an LED indicator, this device simplifies your workflow. The integrated DisplayLink DL-6950 chipset ensures smooth performance while providing up to 5 Gbps data transfer speeds. With a power adapter that supplies up to 100 W, it supports pass-through charging for your devices, making it a powerful hub for connectivity and power management.
The COS-02 cooling stand from Savio has been designed to increase the productivity and comfort of your laptop. It guarantees excellent cooling and is great for intensive use at home, as well as for long gaming sessions or office work. Technical specifications: Output/input types: 2 x USB 2.0 Number of fans: 2 Size of fans: 140 x 140 x 15 mm Speed: 1000 10% RPM Maximum airflow: 115 CFM Maximum noise level: 25 dBA LED fan backlighting: Yes (red) Adjustable tilt angle: 6 degrees (0-60°) Compatible with laptops: up to 17.3 inches Dimensions: 357 x 260 x 32 mm Weight: 850 g Package content: Cooling stand USB-A USB-A cable User manual Two fans The COS-02 is equipped with two 140 mm fans. Each of them is characterized by a speed of 1000 RPM, which ensures effective cooling of the laptop. What's more, thanks to them, the hardware maintains a low noise level of just 25 dBA, guaranteeing almost silent operation. In addition, they feature red LED backlighting, which gives the product a gaming character and fits perfectly into the gamer's stand. Tilt angle adjustment The COS-02 stand also offers a 6-degree tilt angle adjustment (from 0 to 60 degrees). This allows you to adjust the position of your laptop to your individual needs. Optimally positioning your laptop at the right angle improves your gaming position. It also reduces tension in your wrists, neck, and back. Reliable cooling The cooling stand from Savio provides a maximum airflow of up to 115 CFM. Combined with a mesh top surface, this allows for efficient heat dissipation and also prevents laptop components from overheating, thus lowering performance. Anti-slip surface The non-slip surface on the feet of the stand prevents it from sliding, so both the cooling stand and the hardware stay in place. This minimizes the risk of falling or damaging the device. Stable construction The COS-02 stand is made of plastic and metal. It offers good structural stability, which translates into comfort and safety when working with a laptop. The sturdy metal bracket can support the weight of even large and heavy laptops, without bending or deforming under pressure. The well-balanced plastic base and wide handle guarantee even weight distribution. This reduces the risk of accidental tipping or slipping of the laptop. USB 2.0 connectors Built-in two USB 2.0 connectors allow you to power the stand's fans and plug in another device at the same time, without losing a port on your laptop.
RAID system for 2-bay 2.5"/3.5" SATA HDD/SSD with RAID mode switches Store it all, up to 60 TBDesigned for large-scale storage needs, this RAID system supports two 3.5" or 2.5" drives with a combined capacity of up to 60 TB. Ideal for backups, multimedia projects, and data-heavy workflows. RAID mode instructionsEasily configure your preferred RAID setup: RAID 0, RAID 1, SINGLE, or LARGE via the integrated DIP switch. Flexible options let you balance between performance and data security. Advanced heat controlEquipped with a 50x50 mm fan, the unit maintains optimal operating temperatures even under heavy workloads. This ensures stable performance and extends drive lifespan. Fast and stable 5 Gbps performanceThe USB 3.2 Gen 1 Type-C interface delivers transfer speeds of up to 5 Gbps. Perfect for handling large files quickly and reliably. Wide system & drive compatibilityCompatible with both 2.5" and 3.5" SATA HDDs or SSDs, and supports SATA III with backward compatibility for SATA II drives. Works seamlessly across different setups and operating systems. Ready to use, all accessories includedComes complete with a power adapter, cables, and everything needed for setup. Ready to run right out of the box for immediate data access.
Acer USB Type-C Dock III. Ühenduvustehnoloogia: Juhtmega ühendatud, Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-C. Ethernet LAN-i andmeedastuskiirused: 10,100,1000 Mbit/s. Toote värv: Must, Kaabli luku pesa tüüp: Kensington. ...
