Kompaktsete mõõtmetega 7-ühes dokkimisjaam pakub teie sülearvuti jaoks mitmesuguseid ühendusi.; Allavoolu USB-C port võimaldab läbida kuni 90 vatti võimsust kuni 10 Gbit/s andmeedastuskiirusega ning võrguport võimaldab kiiret ...
Multiport USB-C 10Gbps hub AXAGON HMC-12GM2 GEN2COMBO 12in1 expands your laptop, computer or phone with eleven ports and external box for M.2 disk. You can easily and quickly connect up to two monitors, four USB devices, a Gigabit Ethernet network, headphones, an SD card reader, and an NVMe or SATA M.2 SSD o your computer via the reversible USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a simple and compact 12in1 docking station for notebook like MacBook Air or Pro. The USB hub offers three USB outputs with standard USB-A connectors. Two with 5Gbps speeds and a third with 10Gbps speeds for more demanding devices. It also offers a USB-C 10Gbps data connector. The hub can also handle permanent connection of two external drives simultaneously. Thanks to the fast USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10Gbps. The second USB-C connector is reserved only for powering and simultaneous charging of laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI and DisplayPort outputs provide a high-quality picture. Whether used alone or simultaneously, the ports offer resolutions up to 4K/60Hz Ultra HD and support multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port and above. You can connect a NVMe or SATA M.2 SSD drive thanks to the built-in slot on the back. The multiport hub thus becomes an external drive. M.2 cards can be single-sided or double-sided up to a size of 22x80 mm. The external M.2 box has no capacity limitations for SSDs and supports modern functions such as TRIM, UASP and enables reading S.M.A.R.T. disk status monitoring information. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card.Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. Thanks to the high-speed USB interface, you can make the most of the potential of modern memory cards. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. Active cooling is provided by a silent integrated fan, which cools both the M.2 disk and the body of the hub itself. You will also be pleased with the finely textured surface, which does not leave fingerprints. The port replicator is the ideal accessory for laptops with a lack of USB connectors, memory or video outputs. The 50 cm USB-C cable is detachable and can be replaced with a longer cable if needed. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: USB 10Gbps (USB 3.2 Gen2). Compatible with Thunderbolt 3/4. Connection via reversible USB type C female connector. USB outputs: 1x USB 10Gbps port, USB-A female connector. 2x USB 5Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. 1x USB Power Delivery 100W (only for charging), USB-C female connector. USB-C hub can handle the connection of two external drives simultaneously. Video outputs: 1x HDMI A port, HDMI A female connector. 1x DP port, DisplayPort female connector. Video resolution and properties: Maximum supported resolution when each port is connected individually is 4K / 4096 x 2160 at 60 Hz. 2 simultaneously connected monitors - up to 4K/60Hz on both monitors. For proper video output function, the hub must be plugged into a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) version 1.4 or higher, or a USB-C port with Thunderbolt 3/4 support. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Supports up to 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio formats. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 100W - 20V/5A. Required PD support from the device (laptop, phone) and a suitable PD wall charger. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x / 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. Copying from card to card. M.2 SSD slot: NVMe & SATA M.2 SSD disks. Designed for M key or B+M key format cards. NGFF 75-pin M-key slot for M.2 drives. Supports M.2 drives with a size of 2242, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Support of TRIM functionality to limit gradual degradation of the SSD performance over time. Support for booting from an SSD in the hub's M.2 slot. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Support IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminats the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN function in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, ECMA-393 proxZzzy for sleeping hosts, RealWoW! and also Link Change Wake-up. Advanced Power Management features: The adapter supports advanced power management and supports advanced power saving e.g. when the Ethernet cable disconnection. Supported Power Management technologies are e.g. Advanced Configuration Power management Interface (ACPI), Link Power Management (LPM) or IEEE 802.3az EEE (Energy Efficient Ethernet) and others. Audio output / input: 1x 3.5 mm jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0). Supports transmission rates 10.000 / 5.000 Mbit/s. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub and M.2 disk operation is better dissipated and transferred to the surroundings. The LED indicates the data transfer of the M.2 drive. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 149 x 65 x 17 mm. Weight 178 g (incl. cable). USB cable length 50 cm. Supported operating systems: Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub USB-C cable 50 cm long mounting material multilingual manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA packed in a cardboard box
Lenovo GX20Z46271. Otstarve: Sülearvuti, Toite tüüp: Hoonesisene/hooneväline, Sisendpinge: 100 - 240 V. Toote värv: Must. Kaabli pikkus: 1,68 m, Laius: 118 mm, Sügavus: 77 mm. Kogus pakis: 1 tk, Kaablid kaasa arvatud: USB tüüp-C, ...
Next-generation, high-performance USB-C docking station that supports output to up to three external monitors at up to 4K high resolution. The docking station can be used with virtually all notebooks equipped with USB-C, USB4 and Thunderbolt 3/4 ports, while supporting all currently popular operating systems. A multitude of USB ports (including those supporting Gen 2 at speeds of up to 10 Gb/s), a reliable and fast connection to the corporate network thanks to the integrated LAN port and support for installation behind a monitor make this docking station the ideal companion for true professionals. Of course, it supports charging a laptop or tablet up to 100 W. Possibility to connect up to 3 external monitors in resolution up to 4K* Power delivery: up to 100 W 2 DisplayPort and 1 HDMI port available 7 USB ports: 2x USB-C (10 Gb/s) supporting BC 1.2 fast charging and 5x USB-A (1x Gen 2 (10 Gb/s) supporting BC 1.2 fast charging, 2x Gen 1 (5 Gb/s) supporting fast charging BC 1.2 and 2x USB 2.0) Gigabit Ethernet RJ-45 provides reliable, solid and fast Internet connectivity with support for 10/100/1000 Mbps speeds Combo jack for audio and microphone The Kensington lock provides protection against theft, especially in shared office spaces or public places The docking station's power switch allows for maximum energy savings The dock supports VESA mounting for convenient vertical installation behind a VESA-enabled monitor Supports Windows 10/11, macOS, iPadOS, Android, Chrome OS and Linux (with latest updates) * macOS does not support Multi Stream Transport (MST). Connecting two or more monitors to the macOS station will cause all monitors to display the same image.
7-in-1 DockingStationwith magnetic M.2 NVMe and SATA SSD enclosure and built-in cooling fanM.2 NVMe and SATA - This DockingStation combines powerful connectivity with fast external storage by integrating a high-speed M.2 NVMe and SATA SSD enclosure. Supporting capacities up to 8 TB, its a practical solution for handling large files, backups, or media librariesall from one compact, all-in-one device on your desk. Connectivity for Work and Play - Equipped with USB Type-C and USB Type-A (Gen 2) ports offering transfer rates up to 10 Gbit/s, this DockingStation handles fast data transfers with ease. It also features an HDMI port for 4K@60 Hz displays and SD/microSD slots supporting speeds up to 104 MB/s. Magnetic Attachment Features a magnetic cover that allows it to attach securely to the back of your phone or other compatible devices. This makes it incredibly convenient for users who need extra storage on the go Power Delivery 3.0 - Stay powered throughout the day with a USB Type-C PD-IN port that supports up to 100 watts of power delivery. Simply connect your USB Type-C power supply to keep your DockingStation and connected devices charged without needing extra adapters or cluttering your workspace. Operating System - Whether youre working on Windows, macOS, or Linux, this DockingStation fits into your existing setup. Its designed to work with a wide range of devices and system environments, so you can switch between workstations without worrying about compatibility or needing separate accessories for each system.
Lenovo ThinkPad USB4 Smart Dock 5500 represents the latest generation of docking solutions. The dock?s USB4 technology quadruples performance compared to the USB-C 3.2 Gen 2 standard. A 40 Gbps speed ensures you can connect, for example, one 8K@60Hz display or two 4K@144Hz displays to the dock. Declutter your workspace: with a single USB-C cable you can easily connect everything essential?displays, network, peripherals?and deliver power (max 100 W) to the host device. The cloud-based Lenovo Accessories Fleet Manager (LAFM) provides an effective modern management solution. It allows IT administrators to manage, update, configure, and diagnose docking stations easily, anytime and anywhere. The product is made of 90% recycled material and ships in plastic-free packaging. Top features Display ports: 2x DP 1.4, 1x HDMI 2.1, 1x USB-C 3.2 Gen2 (Full-Function DP 1.4) Other ports: USB4 (Connect to PC), 2x USB-A 3.2 Gen2 (1x AOU, 12 W), 2x USB-A 3.2 Gen2 (10 W), 1x USB-C 3.2 Gen2 (AOU, 7.5 W),1 Gbps RJ45 135 W Slim Tip power adapter with 100 W charging power Support for four external displays Maximum resolution with four displays: 3840x2160@60Hz Maximum resolution with two displays: 3840x2160@144Hz Maximum resolution with one display: 8K@60Hz Cable lock: NanoSaver and MicroSaver Certain functionalities (PXE boot, WoL, MAC address pass-through, dual power button) may not work with devices other than ThinkPad devices Management with the Lenovo Accessories Fleet Manager application In the box: Dock, 1 m USB4 cable (integrated), 135 W Slim Tip power adapter, power cord Dimensions: 218x80x31.5 mm Three year warranty Note! The real resolution will depend on your PC and Monitor capability. For details, see here
Control the flow while maintaining optimal performance utilizing smart-pin technology, drawing only minimal power when not in use, and helping provide reliable surge protectionProtect your cable and improve cable manageability. The new right-angled (90°) 4.5mm connector allows access in tight spaces and takes stress off the cord by reducing bending
Control the temperatures with Natec OrioleNatec Oriole is a rugged cooling stand dedicated to 17.3" laptops. Its high efficiency is the result of having 3 fans. There are also many features that make it easy to adjust it to your own expectations. Fan speed control? Adjustable degree of inclination? With Natec Oriole it is possible. And this is just the beginning. Built to fight temperaturesNatec Oriole is here to deal with the high temperatures of your laptop. Adequate cooling is ensured by 3 efficient 120mm internal fans. What's more, thanks to the three-stage speed control, you can easily adjust the stand to your style of operation, regardless of whether you are interested in exciting gameplay or work. Bet on silence and reduce fan speed to a minimum. Deal with temperatures and force the fans to work at maximum speed. It's all up to you. Work the way you likeDo you want to adjust the Natec Oriole stand to your needs? You can do it easily with 7-step tilt angle adjustment. You also don't have to worry about stability. Non-slip elements located on the bottom of the stand will give stability in any situation and on any surface. With Natec Oriole your laptop feels safe. Convenient power supplyForget about the extra power supply. Natec Oriole is powered by one of two built-in USB-A ports, all via a dedicated, included cable. And if you want to power the stand using the USB-C port, you can also do it easily. In the set you will find a special adapter that will allow you to connect it. Proven materialsWhilst the fans are responsible for cooling your equipment, further heat dissipation would not be possible without a perforated metal panel. Thanks to this, the pumped air flows through the stand without resistance, guaranteeing quick cooling of the laptop. In addition, the metal panel performs one more function - it provides high durability. All this so that you can use the stand for years. Make your device stand outNatec Oriole will be perfect for your desk, no matter what you do. This is possible not only thanks to the elegant design, but also due to illuminated fans which will emphasize the design of any laptop with a delicate blue glow. Gaming? Business? It doesn't matter what you use your laptop for. With Natec Oriole it will look phenomenal every time.
Multiport USB-C 3.2 Gen 1 hub AXAGON HMC-6GL. Input:
1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector.
Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 connector. Compatible with Thunderbolt 3. Input USB type C male connector on fixed 20 cm cable.
USB outputs: 3x SuperSpeed USB port, USB-A female connector. 1x USB type C Power Delivery port (only charging) USB-C female connector. Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 1 interface used (theoretical-ly up to 5 Gbit/s).
USB-C hub can handle connection of several external drives simultaneously. Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.1A at 5V (depending on the capabilities of the computer's USB port).
HDMI output: HDMI A (F) female connector.
Maximum supported resolution 4K / 4096 x 2160 at 30 Hz.
WQHD resolution 2560 x 1440 at 60 Hz max. FullHD resolution 1920 x 1080 at 60, 100, 120 Hz max. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. At the same time, support from the device (laptop, phone) and the operating system is necessary. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signaling) support. Full HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio format support. Sample rate up to 192 kHz and 24bit audio support depends on source and target device i.e. notebook/phone and TV/display/AV receiver. RJ-45 Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s.
Apple USB-C 96W Power Adapter on kõrge jõudlusega laadija, mis pakub kiiret ja efektiivset laadimist Sinu ühilduvatele MacBook Air või MacBook Pro seadmetele. Selle kompaktne disain ja võimas väljund muudavad selle ideaalseks valikuks nii kodus kui ka reisil olles. • 96W USB-C väljund • Kiire ja efektiivne laadimine • Kompaktne ja kaasaskantav disain
The Logitech TAP Conference Controller IP graphite is a touch controller designed to streamline video conferencing with one-touch join and uniform user experience across all rooms. It features a single PoE cable for easy installation with optional Table, Riser, and Wall mounts, and offers secure cable management to ensure readiness for meetings. This device can be used standalone or integrated with Logitech room solutions for platforms like Microsoft Teams and Zoom Rooms, and comes with a 2-year warranty, Ethernet LAN (RJ-45), and a sleek graphite color.
Apple'i 30W USB-C toiteadapter pakub kiiret ja tõhusat laadimist nii kodus, kontoris kui ka liikvel olles. See adapter on ühilduv igasuguste USB-C seadmetega, kuid Apple soovitab seda kasutada eriti MacBook Airi ja Apple Vision Pro mudelitega. Samuti sobib adapter valitud iPhone'i ja iPad Pro mudelitega, et kasutada ära nende kiirlaadimisvõimalusi. • 30W USB-C väljund • Kiire ja efektiivne laadimine • Kompaktne ja kaasaskantav disain
i-tec C31FLAT2PDPRO100W. Ühenduvustehnoloogia: Juhtmega ühendatud, Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-C, USB Power Delivery kuni: 100 W. Ethernet LAN-i andmeedastuskiirused: 10,100,1000 Mbit/s. Toote värv: Hõbe, Ühilduvad ...
USB hub with versatile connectivity options, high speed of up to 5 Gbps, powerful Power Delivery feature, support for 8K/30Hz and 4K/120Hz, compatibility with various operating systems
A powerful office docking station supporting super-fast USB Gen 2 ports with fast charging. The docking station supports output to two external monitors in high resolution up to 4K. The docking station can be used with virtually all notebooks as it supports connection to all popular ports: USB 3.0, USB-C and Thunderbolt 3/4" while supporting all popular operating systems today. Plenty of USB ports (two USB-C support Gen 2 with speeds of up to 10 Gbps), a reliable and fast connection to the corporate network thanks to the integrated LAN port and the possibility of mounting behind a monitor make this docking station the ideal companion for real professionals. Of course, it supports charging a laptop or tablet with a power of up to 100 W. Professional, universal docking station, compatible with laptops and tablets equipped with a USB-C, USB-A and Thunderbolt connector. 2x DisplayPort and 2x HDMI supporting up to two 4K/60Hz displays (also applies to Apple M1/M2 platform) or a single 5K/60Hz display. 7 USB ports, including 2x USB-C Gen 2 (1x supporting 20W PD charging and one supporting BC 1.2 fast charging) and 5x USB-A 3.2 (2x Gen 2 and 3x Gen 1), making it easy to connect multiple USB devices and peripheral devices for super-fast data transfer. Provides up to 100W of power for compatible USB-C and Thunderbolt laptops and tablets. The host device must support USB-C Power Delivery. GLAN Ethernet supports network speeds of 10/100/1000 Mbps, ensuring a solid and fast Internet connection. Combined high-quality 3.5mm 32bit/192kHz audio input and output for easy connection to a headset or speakers. An available VESA mount helps keep your desk tidy and free from cables, while a K-lock slot provides additional security.
10-in-1 DockingStation with M.2 NVMe SSD enclosureToolless M.2 SSD Installation - Features an integrated M.2 NVMe SSD enclosure, supporting PCIe Gen3x2 for rapid data transfer. The tool-free design allows for quick SSD installation or replacement. With support for multiple SSD sizes 22x 30/42/60/80, this enclosure provides a practical and fast storage expansion solution. USB Connectivity One USB Type-C (10 Gbit/s), one USB Type-A (10 Gbit/s), and one USB Type-A (5 Gbit/s). A SD/microSD card reader for convenient file access, a Gigabit Ethernet port for stable networking, and a 3.5mm audio jack for headphones or microphones. HDMI Display - The built-in HDMI port delivers sharp and detailed visuals with a maximum resolution of 4K at 60Hz. Whether you need a second screen for multitasking, an extended display for presentations, or a larger workspace for creative projects, this docking station provides high-definition video output. Power Delivery 3.0 - Stay powered throughout the day with a USB Type-C PD-IN port that supports up to 100 watts of power delivery. Simply connect your USB Type-C power supply to keep your DockingStation and connected devices charged without needing extra adapters or cluttering your workspace. Protective Design - To help shield the enclosure from bumps and scratches, this DockingStation comes with a custom-fit rubber sleeve. It adds a layer of protection during transport or everyday use, helping to keep the device looking clean and staying intact whether its on your desk or in your bag. Operating System - Whether youre working on Windows, macOS, or Linux, this DockingStation fits into your existing setup. Its designed to work with a wide range of devices and system environments, so you can switch between workstations without worrying about compatibility or needing separate accessories for each system.
RAID system for 2-bay 2.5"/3.5" SATA HDD/SSD with RAID mode switches Store it all, up to 60 TBDesigned for large-scale storage needs, this RAID system supports two 3.5" or 2.5" drives with a combined capacity of up to 60 TB. Ideal for backups, multimedia projects, and data-heavy workflows. RAID mode instructionsEasily configure your preferred RAID setup: RAID 0, RAID 1, SINGLE, or LARGE via the integrated DIP switch. Flexible options let you balance between performance and data security. Advanced heat controlEquipped with a 50x50 mm fan, the unit maintains optimal operating temperatures even under heavy workloads. This ensures stable performance and extends drive lifespan. Fast and stable 5 Gbps performanceThe USB 3.2 Gen 1 Type-C interface delivers transfer speeds of up to 5 Gbps. Perfect for handling large files quickly and reliably. Wide system & drive compatibilityCompatible with both 2.5" and 3.5" SATA HDDs or SSDs, and supports SATA III with backward compatibility for SATA II drives. Works seamlessly across different setups and operating systems. Ready to use, all accessories includedComes complete with a power adapter, cables, and everything needed for setup. Ready to run right out of the box for immediate data access.
AXAGON HMC-U4 DUAL 4K DISPLAY dock turns your laptop, tablet or phone into a multimedia centre. With the next generation USB4 technology, this docking station offers a total data throughput of up to 40 Gbps. So, you can take full advantage of even the most demanding computer accessories and enjoy a high-end experience. Whether you're watching 8K video or working with two 4K monitors simultaneously, this technology delivers the performance you need. USB4 offers the benefit of Thunderbolt compatibility while supporting backward compatibility with previous generations of USB. You will connect your laptop to the 12in1 docking station via the supplied 80 cm long cable. In no time, you have fast SD (UHS-II) and microSD card reader, and connectors for connecting two external monitors, five USB devices, headphones or headset, and Power Delivery power. However, it is necessary that the USB-C port of your mobile device supports video output (DisplayPort Alternate Mode) and Power Delivery power. HDMI and DisplayPort outputs allows you connect an external monitor, TV or projector with up to 8K/30Hz Ultra HD, 4K/144Hz Ultra HD or 2K/240Hz Quad HD resolution, with support for multi-channel audio streaming. With HDR support, you can enjoy a richer colour spectrum and sharper contrasts for an even better visual experience. By connecting two monitors simultaneously, you get resolutions up to 4K/144Hz on the DP port output and 4K/60Hz on the HDMI output. All supported resolutions and features are directly dependent on the support of the connected monitor and laptop. The docking station has a total of three 10Gbps USB-C (2x) and USB-A (1x) outputs, as well as two 5Gbps USB-A outputs. These five USB ports allow you to connect external drives, flash drives, mouse, printer and other USB accessories. The USB ports also charge mobile phones and tablets with a power of up to 7.5W. The memory card reader supports reading and writing of all versions of SD (UHS-II) and microSD (UHS-I) cards with a capacity of up to 2TB. UHS-II cards reach speeds of up to 156 MB/s (full-duplex) or 312 MB/s (half-duplex), support for older UHS-I cards (max speed 104 MB/s) is a matter of course. The card reader enables simultaneous handling of cards in both slots and direct copying between them. You can use the 3.5 mm audio output to connect stereo headphones, headset or active speakers. It is equipped with a high-quality DAC converter, which supports sampling up to 384 kHz at 24 bits. You will enjoy superior sound quality that is ideal for lossless formats such as FLAC, WMA, WAV, APE, AAC and ALAC. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. The USB-C (PD) input is designed for a suitable Power Delivery charger. This allows both your mobile device and the dock to be powered directly from the PD charger using Power Delivery 3.0 technology with up to 100W of power. With the additional power supply via USB-C input (DC 5V), you can boost the power supply when operating without a PD charger connected and connect devices with higher power consumption such as multiple external drives to the multiport hub. The button on the top of the dock is used to turn the dock on and off. Thanks to the clever design with four rubber feet, the station stays firmly in place. Elegant ribbed surface on the top leaves no fingerprints. Vents on the underside ensure sufficient air circulation so that the dock does not overheat even at higher loads. Input (connection to computer or mobile device): USB4 40Gbps (USB4 Version 1.0), USB-C female connector. Compatible with Thunderbolt 3/4, USB 10Gbps, USB 5Gbps. Input (power supply): USB Power Delivery 3.0 - 100W connector (only for charging), USB-C female (PD) connector. PD power must be supported by both the mobile device and the mains charger. Additional power supply for external drives connected via hub, USB-C female connector (DC 5V). Recommended power supply 5V/2A. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-A female connector. 2x USB 10Gbps port, USB-C female connector. USB-C hub can handle the connection of two external drives simultaneously. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports. Video outputs: 1x HDMI A port, HDMI A female connector. 1x DP port, DisplayPort female connector. Maximum supported resolution: Laptop with USB4 40Gbps or Thunderbolt 4 port: 1 monitor - up to 8K/30Hz, 4K/144Hz Ultra HD, 2K/240Hz Quad HD, 1080p/360Hz Full HD 2 monitors - up to 4K/144Hz + 60Hz Ultra HD, 2K/240Hz + 144Hz Quad HD, 2x 1080p/240Hz Full HD Notebook with USB 10Gbps port: 1 monitor - up to 8K/30Hz, 4K/144Hz Ultra HD, 2K/240Hz Quad HD, 1080p/360Hz Full HD 2 monitors - up to 2x 4K/60Hz Ultra HD, 2x 2K/144Hz + 144Hz Quad HD, 2x 1080p/240Hz Full HD Video features: Also compatible with devices with Thunderbolt 3 ports. For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz. To achieve maximum resolution and frequency values on video outputs, the dock must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 4. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High dynamic range, 10 bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Up to 8-channel LPCM audio, compressed audio (AC-3, DTC) and HBR audio format support. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. The card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash, SD slot: SecureDigital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. SD UHS-II support. Speeds up to 156 MB/s Full Duplex or 312 MB/s Half Duplex. Support SD 1.0 to SD 4.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MicroSD UHS-I support. Speed up to 104 MB/s. Support hardware ECC function and CRC function. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. Audio output / input: 1x 3.5 mm 4 pin jack for headset, headphones or active speakers, 2-channel analog stereo output 384 kHz @ 24bit for playback, 192 kHz @ 24 bit analog microphone input for recording. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus (USB bus power). Power supply via PD charger (not included). Additional power supply for USB ports (USB-C DC 5V connector). Any USB charger (not included) with 5V output voltage and 2A current can be used. ON/OFF buton to switch the docking station on/off. The LED indicates the connection of the dock to the computer with a steady glow. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 188 x 80 x 20 mm. Weight 164 g (without cable). USB-C USB-C cable 80 cm long for connecting the dock to a laptop. USB-A USB-C cable 100 cm long for connecting additional power supply. Supported operating systems: Microsoft Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C docking station, cable (data) USB-C USB-C length 80 cm, cable (power) USB-A USB-C length 100 cm, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box.
The i-Tec CA6MONITORDOCKPD Docking Station offers extensive connectivity options, featuring multiple interfaces such as USB-C, HDMI, and DisplayPort for seamless integration with various devices. With support for up to six displays, including configurations with up to 144 Hz refresh rates, this docking station enhances productivity by allowing for an expansive visual workspace. It also supports both SD and microSD memory expansion, making file transfer and storage management convenient for daily use. Designed for versatility, the dock includes Ethernet options for high-speed data transfer, reaching up to 2.5 Gigabit Ethernet, and a headphone/microphone combo jack for enhanced audio experience. Power delivery capabilities enable fast charging, with options for 30 W and up to 140 W via USB-C/Thunderbolt, ensuring devices remain charged throughout use. Additional features, such as wake on LAN, LED indicator, and VESA interface compatibility, provide extra functionality that caters to professional needs.
ASUS USB-C Stand Dock is a sleek and ergonomic 10-in-1 docking station designed for enhanced productivity. It serves as an adjustable stand, elevating laptops to an ideal position for comfortable viewing. A pair of HDMI® ports help extend screens across two 4K 60Hz displays, while four high-speed USB Type-A ports, 100W of charging power, and additional connectivity options transform any setup into an extremely versatile workstation.
The i-Tec C31TRIPLEVIDEODPPRO is a USB-C docking station designed to enhance connectivity options. This docking station supports up to 3 monitors through dual HDMI outputs and a DisplayPort connection, making it suitable for multitasking and productivity. The LED indicator and on/off switch provide easy control and monitoring of the device's status.Equipped with 100 W Power Delivery, the i-Tec docking station connects peripherals and charges compatible devices efficiently. Its ABS housing ensures durability while maintaining a sleek profile. With support for up to 10 Gbps data transfer rates and a variety of connectivity options including Ethernet and audio/video interfaces, this docking station meets diverse needs in both home and professional settings.
