Apple originaal 67W USB-C vooluadapter Kasuta lisaadapterit kodus või kontoris. Apple'i 67W vooluadapter on loodud spetsiaalselt Apple MacBook sülearvutitele. Suurepärane valik uue 13-tollise MacBook Pro (2016 või uuem) või 14-tollise MacBook Pro (M1 Pro kiip) jaoks!
Multiport USB-C 10Gbps hub AXAGON HMC-6GM2 GEN2COMBO 6in1 expands your laptop, computer or phone with five ports and external box for M.2 disk. You can easily and quickly connect up two USB devices, SD card reader, one monitor, and an NVMe or SATA M.2 SSD to your computer via the reversible USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a simple and compact 6in1 docking station for notebook like MacBook Air or Pro. The USB hub offers two USB 10Gbps outputs. One with standard USB-A and one with USB-C data connector. The hub can also handle permanent connection of two external drives simultaneously. Thanks to the fast USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10Gbps. Another USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port and above. You can connect a NVMe or SATA M.2 SSD drive thanks to the built-in slot on the back. The multiport hub thus becomes an external drive. M.2 cards can be single-sided or double-sided up to a size of 22x80 mm. The external M.2 box has no capacity limitations for SSDs and supports modern functions such as TRIM, UASP and enables reading S.M.A.R.T. disk status monitoring information. Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. Thanks to the high-speed USB interface, you can make the most of the potential of modern memory cards. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. You will also be pleased with the finely textured surface, which does not leave fingerprints. The port replicator is the ideal accessory for laptops with a lack of USB connectors, memory or video outputs. Fixed USB-C cable 20 cm long. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: USB 10Gbps (USB 3.2 Gen2). Compatible with Thunderbolt 3 and 4. Connection via reversible USB type C male connector on a fixed 20 cm cable. USB outputs: 1x USB 10Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. 1x USB Power Delivery 100W (only for charging), USB-C female connector. USB-C hub handle the connection of two external drives simultaneously. HDMI output: 1x HDMI A port, HDMI A female connector. Video resolution and properties: Maximum supported resolution 4K / 4096 x 2160 at 60 Hz. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Supports up to 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio formats. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub Maximum power supply power via PD USB-C hub output 100W - 20V/5A Required PD support from the device (laptop, phone) and a suitable PD wall charger The card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash. SD slot: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. M.2 SSD slot: NVMe & SATA M.2 SSD disks. Designed for M key or B+M key format cards. NGFF 75-pin M-key slot for M.2 drives. Supports M.2 drives with a size of 2242, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Support of TRIM functionality to limit gradual degradation of the SSD performance over time. Support for booting from an SSD in the hub's M.2 slot. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0). Supports transmission rates 10.000 / 5.000 Mbit/s. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub and M.2 disk operation is better dissipated and transferred to the surroundings. The LED indicates the data transfer of the M.2 drive. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 149 x 65 x 17 mm. Weight 178 g (incl. cable). USB cable length 20 cm. Supported operating systems: Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 20 cm long cable mounting material multilingual manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA packed in a cardboard box
The biggest charger in the Nexode Pro series is the 160W version, which offers three USB-C ports and one USB-A port. It can charge Apple´s most powerful MacBook Pro models halfway in a half hour, which not even Apple´s own chargers can do. It´s expensive and large, but may be worth it for power users. Ugreen Nexode Pro 160W. A do-it-all charger that can power everything from phones to Pro laptops. The flagship charger is the Nexode Pro 160W, which is the one that really changed my charging habits. The power adapter´s specs mean that your main device (a laptop, most likely) can receive 140W of power. In practice, I was able to get my 13-inch MacBook Air to charge from six percent to 50% in just 26 minutes. After that, from 50% to 75% in another 20 minutes. This was all while I was heavily using my laptop for photo editing, writing, and web browsing. Considering how great the battery life of my laptop is, a 20-minute charge resulted in hours of extra battery life. You might be familiar with how wireless earbuds have a fast-charge feature that can give you an hour of battery in a few minutes of charging. This is the equivalent of that for laptops, and it scales up, too. The company says a 16-inch MacBook Pro can charge halfway in 30 minutes. More importantly, since it has four total ports, the Ugreen Nexode Pro 160W was all I needed to charge while traveling. 4-in-1 160W Smart Charging: Fast charge 4 devices simultaneously with intelligent power distribution. 140W PD 3.1 Super Fast Charging: USB C1 port delivers 140W, charging MacBook Pro 16´´ 0-50% in 27 mins. Intelligent GaNInfinity Chip: Faster, more efficient charging with less heat in a compact design. Superior Compatibility: Supports various devices, including MacBook, Dell, HP, iPad, iPhone, Galaxy, and more. Comprehensive Protection: Intelligent chips safeguard against short circuits, over-voltage, over-temperature, and over current.
35W Dual USB-C Power Adapter/Charger The 35W Dual USB-C Power Adapter lets you charge two devices at once. For home, office, and travel. Apple recommends using it with MacBook Air, but it also works with iPhone, iPad, Apple Watch, and AirPods. The 35W Dual USB-C Power Adapter lets you charge two devices at once. For home, office, and travel. Apple recommends using it with MacBook Air, but it also works with iPhone, iPad, Apple Watch, and AirPods. Pair this power adapter with the World Travel Adapter Kit to charge your device in other countries and regions. Charging cable sold separately.
Apple USB-C 96W Power Adapter on kõrge jõudlusega laadija, mis pakub kiiret ja efektiivset laadimist Sinu ühilduvatele MacBook Air või MacBook Pro seadmetele. Selle kompaktne disain ja võimas väljund muudavad selle ideaalseks valikuks nii kodus kui ka reisil olles. • 96W USB-C väljund • Kiire ja efektiivne laadimine • Kompaktne ja kaasaskantav disain
AXAGON CRE-SMP2A PocketReader on kompaktne reisimiseks sobiv ID-kaardilugeja, millel on USB 2.0 liides ja täiendavad pesad SD-, microSD- ja SIM-kaartide lugemise jaoks. Lugeja toetab kõiki levinud kontaktsete nutikaartide formaate, kiipkaarte ja muid kaarte, sealhulgas kontaktsete pankade maksekaarte või kontaktseid elektroonilisi ID-kaarte. Lugeja on ühilduv enamiku riiklike eID-rakendustega (elektroonilised ID-kaardid). Tänu SIM-kaardi pesale, sealhulgas SIM-haldustarkvarale, SD- ja microSD-kaartide pesadele saab lugejat kasutada ka varundamiseks ja andmete ülekandmiseks.
Thales IDBridgeCT30 USB smart card reader gives you secure and easy way to use Estonian ID card or other smart cards. Innovative transparent design to highlight the card Modular concept with accessories: stand, floppy disk tray, to simplify logistics and inventory Maximum usability and reliability with non removable cable, preventing reader unplugs Compact and lightweight to optimize shipping expenses on large project deployment, fitting in a standard postal envelope size Flexibility for deployment one reader fits all PC installed bases several hardware configurations are possible not dependent of the PC's connection ports any more
Paper/Pasteboard: 793.00 g Embeeded battery: No WEEE tax: Yes Packing quantity: 16.00 pc(s) Gross depth master carton: 440.00 mm Gross width master carton: 555.00 mm Gross height master carton: 670.00 mm Net weight master carton: 16.00 kg Tare weight master carton: 4.26 kg Volume (m3): 0.01 m³ Tare weight (kg): 0.14 kg Gross depth (mm): 420.00 mm Gross width (mm): 330.00 mm Gross height (mm): 65.00 mm WEE classification: CL109:5:2017-04-01 Warranty: 24 month(s) Producer product family: Laptop cooler Wind Pal FS , slim, portabel , highe performance, two 140mm fans, 2 xUSB Hub, up tp 17" Gross weight: 1.14 kg Net weight: 1.00 kg Weight: 922g g Width: 382x262x46mm cm Dimensions (WxDxH): 382x262x46mm mm Depth: 382x262x46mm cm Height: 382x262x46mm cm Other features: Compatible with 17" notebooks and below. Other features: 180mm big fan provides optimal airflow;Unique metal mesh design allows quick ventilation;USB pass-through connector for easy USB device connection;Angle adjustable provides the most comfort in use;Anti-slip design ensures notebook safety.
Slim and smart design cooling pad system with LED light, high-performance and extra quiet 4 fans built-in which helps to dissipate the heat-air away from underneath the notebook computer for cooling down the overall temperature of your system. It will render stable work and battery longer life. Extremely heavy-duty construction of the cooling pad to afford any weight or pressure put-on. Power source supported easily by the plug-and-play USB connection as a self-power mode. Convenient, reliable and comfortable to carry. No need for any installation. Compatible with any notebook computers. LED illuminated4 fansAir Flow: 56CFMFan speed: - big: 2000rpm - small: 1500rpmUSB 1.1 portNoise Level: 17dBARated Voltage: DC 5VFan dimensions: - big: 125 x 125 x 15 [mm] - small: 80 x 80 x 15 [mm]Pad dimensions: 415 x 305 x 27 [mm]
Printerikaabel Targus USB to parallel (USB-1284).; Võimalik ühendada paralleelpordiga printereid USB liidesega sülearvuti või lauaarvuti külge.; Plug & Play tugi
Stay unplugged longer with these genuine ThinkPad batteries. These rechargeable batteries use Lithium-Ion technology and can be used as replacement for aging system batteries or as a convenient spare battery
The Mini DisplayPort to VGA Adapter lets you connect a standard analog monitor, projector, or LCD that uses a VGA connector or cable to a Mac with a Mini DisplayPort.
Stop lugging your AC adapter back and forth between home and office. Get a second AC adapter for your notebook and keep one in the office and one for home or travel. The Dell™ 90-Watt AC adapter enables you to operate your notebook or charge the battery from electrical power outlets. This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system.Power supplyAdapter90Watt
Sobilik Dell sülearvutitele ja netbook'idele erineva sisend voolutugevusega., Eriti õhuke ja moderne disain, paksus kõigest 16mm, Automaatselt seadistab õige voolutugevus sinu sülearvutile., LCD ekraan, Sisend: AC100-240V ...
Õhuke, läbipaistev, kaasaegne ning stiilne sülearvuti jahutusalus, 160mm LED valgustussega ventilaator tagab tõhusa jahutamise, Sobib kuni 15.6" sülearvutitele, Toide: USB ühendus, Müratase: 26 dBA, Ventilaatori kiirus: 2400 ...
Kahe 140mm ventilaatoriga Thermaltake Massive 14 rev.2 tagab suurepärase jahutuse, LED valgustus, Sobib kuni 17" sülearvutitele, Reguleeritav ventilaatorite kiirus, Nupp LED valguse sisse/välja lülitamiseks, Liidesed: 2x USB ...
Get power when and where you need it with a ThinkPad AC adapter. Keep one in the office, one at home, and another in your carrying case for convenient access to power. Just plug it into an available wall outlet to deliver AC power ...
90W AC Adapter with Power Cord. Compatible With: ø3.0mm*1 UX21E/31E/B121/EP121 , ø4.0mm*1 1015U/E, U38N/DT, UX21A/UX31A/UX32A/UX32VD, UX42VS, UX50, UX52VS, S200, X201/X202 , ø4.5mm*1 B400/P500/PU401/UX51VZ 65W and 90W B Series , ø5.5mm*1 Standard 65W and 90W NB Notebook
