MicroCARD memory cards with UHS-I interface are ideal for modern devices. The fast UHS-I interface allows you to take full advantage of modern smartphones and tablets, and the adapter included in the M1AA set allows you to use your microCard also in devices with an SD card slot. Depending on the production batch, the actual appearance of memory cards, card reader or packaging may differ from that shown in the picture.
2 independent charging channels Processor-controlled three-stage charging process TC/CC/CV High charging current- 2X 2a/3X 1a Powered by any micro USB Charger (recommended WITH QC 3.0) Compact size-Easy to carry Reactivation function of deeply discharged cells Protection: Short-circuit, thermal, reverse polarity In a small enclosure, a fully professional processor loader with a three-stage charging process TC/CC/CVis concealed. It loads 3.6/3, 7V Li-ion cells with any capacity in sizes 18650, 18700, 20700, 21700, 22650, 25500, 26650.What Is THE TC/CC/CV charging method? It is a three-step process of loading Li-ion cells to keep the cell in good condition by charging the right current at each stage and completing the charging process at the right moment.The various stages of the TC/CC/CV process are:• TC phase: Cells discharged below 2, 9V are ’ awake ’ to lower currents.• CC phase: When 2, 9V is reached, the cell is loaded with a constant current of 2x2A/1x3A.• CV phase: When the cell is already nearly charged, the charger switches to a decreasing current charge until it reaches a voltage of 4, 2V on the cell. After reaching 4, 2V the charging process is complete-the battery is fully charged.Batteries with a voltage of 4, 1V or higher are treated by the charger as charged. To recharge such a full battery, please insert it into the charger before powering it in. When left in the charger, the charged batteries will be subjected to a natural self-discharge process. Charging will resume when the battery voltage drops below 4, 1V.The Xtar SC2 Charger has a function of reactivating deeply discharged cells and cells with a Voltage Of 0v. Many chargers on the market are not able to charge such batteries. Here with the help comes the charger Xtar SC2, which in many cases allows you to ’ resave ’ such cells. Just insert a deeply discharged battery into the SC2 charger, as with normal charging, the charger detects the unloaded link and attempts to reactivate it. Attention! Cells unloaded below a certain level are irreversible and reactivated may not be possible. Avoid too deep discharge of Li-ion batteries-this can lead to a significant reduction in their durability and capacity or to their total malfunction.Chargers from other manufacturers can significantly increase the temperature of the cells being charged during charging. Excessive heating of the cells can cause them to wear more quickly. When designing a SC2 charger, Xtar went one step further from the competition, solving this problem easily: the power from an external power supply was applied. This allows the temperature of the SC2 rechargeable battery to increase by up to 15 degrees.Supplied with Xtar SC2 charger, we get a micro USB cable. The power supply is not Included In the set. Any charger with a micro USB cable, for example, is enough to power the charger. Phone, or USB port or a computer with a free USB socket. The recommended minimum charger power is 2A).
With One Inch Adapter, See-through Style, Easy to Use, Design for use on Real Fire Caliber, Full Metal Compact accessory rail clamps directly to scope tube to provide mounting space for holographic sights, lasers, IR illuminators, flashlights, and other accessories that fit Picatinny style rails. Increases accessory mounting options, without restricting your scope base and ring options. Install on 30mm and 25.4mm one inch riflescope Top rail length: 45mm (1.8 inch), ring length 18mm (0.7 inch) Weight (net): 28g (1.0 ounce) High quality aluminum alloy in durable black matte finish Shock proof and design for use on real fire caliber Can assemble laser, flashlight and red dot sight Can mount either side of the scope Easy to use without special tools With 30mm to 25.4mm (one inch) adapter
Even after the sun eclipse sun observations are of great enjoyment. The sunspots are constantly changing their size, shape and position. Depending on the magnification used even the Umbra and Penumbra, center and edges of the sunspots are visible. It is, however, of essential importance for the protection of your eyes to reduce the sunlight to less than 1/100,000 of its normal brightness. The Astro Solar Sun Filter Foil provides these conditions. It needs simply to be mounted on the front opening of the telescope tube. The Astro Solar Sun Filter Foil meets highest quality requirements and is therefore comparable to expensive plan parallel glass filters. The foil production is under permanent and strict quality control. The multi-reflective foil guarantees an extraordinary even filter effect, so that just one layer of the foil will be sufficient for sun observations.
Find targets in the sky even easier with this 5x24 finder! With the fivefold magnification you overlook a large enough field to find your way in the sky, at the same time the finder scope helps you to find fainter stars. Suitable for small instruments like the Firstscope, where mounting screws and nuts are available on the tube.
Omegon 1.25" Skylum filter - the easy way to discover more on Mars and Jupiter Would you like more detail and contrast when observing the Moon and planets? And that the object should still look natural? - then the Omegon Skylum filter is the 'star' in your eyepiece. It amplifies details in the red or blue parts of the spectrum - see the bands on Jupiter more vividly and make out more detail on Mars. The advantages in a nutshell stronger contrast with Jupiter and Mars - see how the red details stand out deep sky objects - improved contrast with nebulae and galaxies ideal for small telescopes - the image in the eyepiece is still bright and clear 1.25" filter with filter thread also suitable for astrophotography An 'expert' for the entire night sky You do not need to spend time considering which filter might be useful for your object. The Skylum filter is universal and is suitable for many astronomical objects. It turns the night sky background slightly darker and highlights blue and red colours. It will produce more vivid details, even in reddish nebulae. One has to say - it has a real 'sky glow' effect. The filter increases contrast, but causes little attenuation. It is useful for observing the crescent phases of the Moon. It prevents blooming when observing bright planets. And what are the advantages for you? - in future, you will be able to observe these objects in even more detail. Nullifies artificial light Similar to a nebula filter, the Skylum filter only allows certain wavelengths to pass through, and reduces scattered light. In addition, it blocks the light of many street lamps - for example the spectral lines from sodium vapour lamps. The light of the astronomical objects is therefore seen more intensely by the eye. For small and large telescopes The Skylum filter has high light transmission. This makes it ideal for visual observing with small or large telescopes. It will do a good job even with an 80mm telescope. The 'nice' filter for star clusters and galaxies Do the stars looking like glittering diamonds on black velvet? That would be nice. But from the city, the sky sometimes looks like a grey concrete wall. Bur you do not have to put up with this - put the Skylum filter into your eyepiece and to start enjoying star clusters and galaxies. Already the sky looks much darker and the objects clearly more beautiful. Make more of your observing!
Highly ergonomic spectacle elastic, made of rubber material with multiple pleats, which provide ample flexibility as a comfortable cushion and protection of the eye area against impact. Designed for devices with approximately 3" eye relief. Use with optics to reduce eye strain by blocking glare or improving low light, and to improve focus on the target by eliminating distractions caused by peripheral movements that can divert attention. The eyepiece's rubber construction allows for quick eye positioning and alignment of the centre of the optic to speed up target acquisition and increase measurement accuracy. The kit includes a lockable circle to attach to the eyepiece and 3 different thickness inserts to fit devices with 36 mm, 40 mm, 41.5 mm or 43 mm eyepiece diameters.
An upright and laterally-true image thanks to the erecting lens As dusk falls, your telescope is set up and you're looking forward to observing the night sky. That's when it becomes all the more frustrating if you can't find certain objects. It is often difficult to orientate yourself in the night sky with a telescope, especially in the beginning. Not only do you see billions of stars and celestial bodies, but they are all upside down. An erecting lens can solve the problem by providing an upright and laterally-true image. This means that you no longer have to rethink every step and can simply enjoy the view. The highlights at a glance: An upright, laterally-true image gives you more orientation in the night sky Beginner-friendly erecting lens for reflectors (reflector telescopes) 1.5X magnification Suitable for daytime observation with astronomical telescopes More orientation and greater success in observing An erecting lens is a useful accessory and is particularly suitable for those starting out in recreational astronomy. Even if you get used to the reversal effect of the telescope, it is nevertheless advantageous for some observations if the image is laterally true. Finding new constellations by star hopping or targeting a specific detail on the lunar surface becomes so much easier. The lens can be coupled with a 1.25" eyepiece and increases magnification by a factor of 1.5. The lens is of course also great for observing landscapes and animals during daytime.
Bright orange colour for 360 degrees clear visibility- Reliable chuck mount for safe operation- Made of impact-resistant polymer for maximum durability- Suitable for .22 Cal, .27 Cal and .30 Cal rifle magazines, 12 Ga and 20 Ga rifles.- Set of 6
The aluminium construction is black anodized on the inside and on the outside. FEATURES: 15mm optical path length; Telescope side T-2 internal thread; Focus side T-2 external thread; For eyepiece projection with shift/sliding focuser.
Top Offer! TS Optics 17 mm Plössl Eyepiece with 1.25" barrel sizeA good Plössl eyepiece outperforms a simple Kellner. Through bulk purchase, we can offer this type of eyepiece at a price for which you would get only more simple eyepieces elsewhere. Nevertheless, the features are quite impressive. The 17 mm Plössl is a fine all-round eyepiece, it delivers a good performance on planets, but also when viewing nebulae and galaxies. It is often chosen for binoviewers, too, due to the very good ease of view. Areas of application of Plössl eyepieces:Through the four-element design, the Plössl is a true all-rouder. It does not introduce an additional chromatic aberration to the system, in opposite to more simple eyepieces with fewer elements. As a consequence, these eyepieces can be very well used for observing moon and planets with higher magnifications. At lower magnifications, Plössl eyepieces are well suited for observing nebulae, star clusters and galaxies, they convince with a field of view relatively free of distortion. Astrophotographers can also work well with Plössl eyepieces, as they are well suited for eyepiece projection. The MgF2 coating prevents disturbing reflections and provide good contrast. However, many projection adapters are too narrow for the Plössl eyepieces with 32 or 40 mm focal length.
Omegon T-2 ring for Minolta AF - basic adapter for bayonet to T2 thread This Omegon T-ring lets you adapt the bayonet of your SLR camera to the T-2 thread used as a standard fitting in amateur astronomy. There are a large range of adapters that use it. What do I need to connect my camera to the telescope? First, remove the lens from your camera. Then attach this T-2 ring onto the bayonet fitting. You will then see a T-2 female thread, to which you can connect virtually any astronomical adapter. You can connect, for example, a T-2 camera adapter (item 1250) or a focal reducer. These adapters have a T-2 male thread and fit directly onto your T-ring. This combination fits directly onto the focuser of your telescope - firmly attaching your camera to the telescope. The advantages in a nutshell: T-2 ring from the camera bayonet to T-2 base ring for connecting an SLR camera to a telescope connect any T-2 adapter to this ring
When using AstroSolar® Safety Film 5.0 – mounted in front of your optics – you can image the Sun and safely look through the viewfinder of your camera – or you can directly look into the Sun with telescopes and binoculars at any suitable magnification. The coating of AstroSolar® Safety Film 5.0 is subject to constant quality control. Its reflective property and security for solar observation through optical instruments is being tested repeatedly. AstroSolar® Safety Film 5.0 reduces the intensity of solar radiation by 99,999% to a factor of 1 : 100 000 of the initial value. Multiple coating processes on both sides of the carrier film are adding up during production to result in a perfectly uniform filtering result and help in neutralizing the effect of microscopic pores in the coating hat plague conventional glass solar filters which are commonly only coated on one side of the glass.
Baader OTP Outdoor Telescope Power 19WThis 12.8 volt /1.5 Amp switching power supply with protective-disconnect plug serves all Celestron telescopes up to the CGEM-DX series. At little higher price it offers enormous benefits compared to common department store indoor units.Conventional power supplies having a 12V nominal voltage are made for use in your "living room". When used outside in the cold the voltage will reduce with temperature. Already at -10°C the remaining voltage output may have gone down to only 10.5 V. The motors of many telescope mounts will behave erratic at such low voltage. Especially the motor driver electronics then tries to replace the missing voltage by draining ever more Amps until both - power supply and mount electronics - will stall or become damaged. Many users then blame the mount and it´s messy electronics - instead of checking wether an inadaequate power supply may be the culprit.The Baader Outdoor Telescope Power supply offers continuous 1.5 Amp/ < 12 volt DC voltage all accross the AC voltage range from 90 to 260volt. Even at extreme cold the voltage can not go down as far as to damage the electronic components or motors of your telescope mount.19 Watt/ 1.5 Amp permanent power ensure ample reserve for smooth tracking even at full photographic instrument load and high torque variations due to changing telescope balance. In addition to the outdoor voltage of 12.8V also the thermal working temperature has been designed for -25°C to +40°C.The connecting cord measures 2.5m in length. This is longer than usual to ensure that the wall plug portion of the power supply can be safely stored down the tripod legs so that the power cord will not become a trip-wire. The ellbowed plug does protect the power cable from accidental breakage and especially the telescope power input socket from damage when actually someone would trip over the cable. When accidentally the cable gets tightened the connecting ellbowed plug will release the cable straight, without ripping or damaging the power socket affixed in the telescope.
A good Plössl eyepiece outperforms a simple Kellner. Through bulk purchase, we can offer this type of eyepiece at a price for which you would get only more simple eyepieces elsewhere. Nevertheless, the features are quite impressive.The 6.3 mm Plössl is a powerful eyepiece for the high magnification range, mainly used for moon and planets. Areas of application of Plössl eyepieces: Through the four-element design, the Plössl is a true all-rouder. It does not introduce an additional chromatic aberration to the system, in opposite to more simple eyepieces with fewer elements. As a consequence, these eyepieces can be very well used for observing moon and planets with higher magnifications.At lower magnifications, Plössl eyepieces are well suited for observing nebulae, star clusters and galaxies, they convince with a field of view relatively free of distortion.Astrophotographers can also work well with Plössl eyepieces, as they are well suited for eyepiece projection. The MgF2 coating prevents disturbing reflections and provide good contrast.However, many projection adapters are too narrow for the Plössl eyepieces with 32 or 40 mm focal length.
Top Offer! TS Optics 12.5 mm Plössl Eyepiece with 1.25” barrel sizeA good Plössl eyepiece outperforms a simple Kellner. Through bulk purchase, we can offer this type of eyepiece at a price for which you would get only more simple eyepieces elsewhere. Nevertheless, the features are quite impressive. The 12.5 mm Plössl is a fine all-round eyepiece. It delivers a good performance on moon and planets and can be used very well for photography with eyepiece projection. This Plössl can also be used for observing compact deep-sky objects like nebulae or star clusters. It is a good complement to the 25 mm overview eyepiece and offers already nice viewing comfort. Areas of application of Plössl eyepieces:Through the four-element design, the Plössl is a true all-rouder. It does not introduce an additional chromatic aberration to the system, in opposite to more simple eyepieces with fewer elements. As a consequence, these eyepieces can be very well used for observing moon and planets with higher magnifications. At lower magnifications, Plössl eyepieces are well suited for observing nebulae, star clusters and galaxies, they convince with a field of view relatively free of distortion. Astrophotographers can also work well with Plössl eyepieces, as they are well suited for eyepiece projection. The MgF2 coating prevents disturbing reflections and provide good contrast.
The Plossl eyepiece design has set a new standard for quality and has been in use for decades. Its popularity is due to the good performance at an unusually low price. Super Plossls are state of the art Plossl eyepieces with outstanding optical quality. They are particularly well suited for observing planets and the moon. Their image sharpness and their high transmission make them ideal eyepieces for many applications. Quality Features of the Super Plössl eyepieces: High-Grade Multi-Coating: A special high-grade multicoating on all glass-to-air surfaces provides for excellent light transmission, image clarity and colour fidelity. For further information on this FMC coating please see "user reports"! Blackened lens edges for suppression of stray light inside the eyepiece. This is particularly important when viewing bright objects Rubber eyeguard for better viewing comfort. The eyeguard also keeps stray light from the side out of your eyes.
This ring lets you connect all Sony Nex3 and Nex5 cameras, and all Sony-á interchangeable lens cameras possessing an E bayonet, to a T2 thread. The optical path is exactly 55mm, from the telescope side T2 thread to the sensor. TS Optics is a Telescopic Service trademark.
AstroSolar Photo Film (imaging only), telescope quality, Optical Density OD = 3.8; Digital solar imaging at highest magnifications and short exposure times. Not suitable for visual observation; This highest precision film consistently produces strehl ratios of 94 to 96 percent at interferometric tests – thus it performs optically; like a Fluorite Triplet Lens by Carl Zeiss or Astro Physics; AstroSolar Photo Film OD 3.8 is only intended to be used by well-experienced Astro-imagers. This material is not intended to serve; for protection during visual solar observation.
Flexibility and precision, that's what BRESSER ball heads stand for.By means of the 360 degree rotatable and additionally 90 degree tiltable ball joint the camera can easily be brought into any desired position. For panoramic photos the ball head is also equipped with a 360 degree rotatable base plate. Both, the ball joint as well as the panoramic base plate can be moved smoothly and jerk-free and locked in place securely with the corresponding knobs. The integrated circular bubble level and the angle scale help with the exact positioning.The quick release plate allows for a quick and uncomplicated exchange of cameras. The BH-51MT ball head is suitable for all heavy DSLR and medium format cameras up to a total weight of 10 kg. With 1/4 inch tripod connection thread. FEATURES sturdy metal ball head for cameras up to 10 kg rubber coated quick release plate for shock absorption 1/4 inch photo screw integrated circular bubble level 360° rotatable base plate with angle scale 1/4 inch tripod thread SCOPE OF SUPPLY Ball head Quick release plate Manual
Accurate manufactured T2 extension ring with an overall length of 40mm excluding T2 external thread. This extension tube is a real problem solver for fine tuning!FEATURES: 40mm optical path length; Telescope side T-2 internal thread; Focus side T-2 external thread; For eyepiece projection with shift/sliding focuser.
Tērauda korpuss, kas piemērots S12 meža kamerām aizsargā jūsu kameru no dzīvniekiem un ekstremāliem laikapstākļiem. Korpusam ir plašas bloķēšanas un montāžas iespējas, kā arī to var aizslēgt ar atsevišķu stiepļu slēdzeni vai piekaramo atslēgu. Meža kameru var izmantot arī ar ārēju barošanas avotu, kad tā ir ievietota korpusā. PIEZĪME! Šis drošības futrālis ir saderīgs ar Burrel S12 taku kamerām.
A good Plössl eyepiece outperforms a simple Kellner. Through bulk purchase, we can offer this type of eyepiece at a price for which you would get only more simple eyepieces elsewhere. Nevertheless, the features are quite impressive.The 40 mm Plössl offers maximum field of view with 1.25" and is a fine overview eyepiece. With its long focal length of 40 mm, it is especially suited for slow telescopes like Cassegrains or refractors not faster than f/8. The image stays still bright, making the eyepiece well siuted for observing nebulae, open star clusters and galaxies, but also for centering of objects. Areas of application of Plössl eyepieces: Through the four-element design, the Plössl is a true all-rouder. It does not introduce an additional chromatic aberration to the system, in opposite to more simple eyepieces with fewer elements. As a consequence, these eyepieces can be very well used for observing moon and planets with higher magnifications.At lower magnifications, Plössl eyepieces are well suited for observing nebulae, star clusters and galaxies, they convince with a field of view relatively free of distortion.Astrophotographers can also work well with Plössl eyepieces, as they are well suited for eyepiece projection. The MgF2 coating prevents disturbing reflections and provide good contrast.However, many projection adapters are too narrow for the Plössl eyepieces with 32 or 40 mm focal length.
Can be fitted to any of our telescopes supplied with the EQ1 equatorial mount. Provides single-speed (1x Sidereal) motor tracking of the R.A. axis. Battery-powered.
This Barlow lens doubles the focal length of your telescope. It allows you to make astronomical observations with a higher magnification than a conventional eyepiece. Thanks to the Barlow lens between the eyepiece, you can obtain a greater magnification whilst maintaining a comfortable interpupillary distance. This Vixen 2x Barlow lens is ideal for observing and photographing lunar landscapes and details on the brighter planets. The Barlow lens also features a T2 connection for photography with DSLR cameras. With T2 extension tubes, it can also be used as a camera projection adapter. With a deflecting prism, the Barlow lens enables you to obtain a magnification factor of 3.3x. FEATURES 2x Barlow lenses with T2 thread 2-lens optical system Doubles the magnification factor Also suitable as a camera adapter 31.7 mm sleeve Weight: 80 g DELIVERY CONTENT 2x Barlow lenses Dust caps
The Plossl eyepiece design has set a new standard for quality and has been in use for decades. Its popularity is due to the good performance at an unusually low price. Super Plossls are state of the art Plossl eyepieces with outstanding optical quality. They are particularly well suited for observing planets and the moon. Their image sharpness and their high transmission make them ideal eyepieces for many applications. Quality Features of the Super Plössl eyepieces: High-Grade Multi-Coating: A special high-grade multicoating on all glass-to-air surfaces provides for excellent light transmission, image clarity and colour fidelity. For further information on this FMC coating please see "user reports"! Blackened lens edges for suppression of stray light inside the eyepiece. This is particularly important when viewing bright objects Rubber eyeguard for better viewing comfort. The eyeguard also keeps stray light from the side out of your eyes.
The bright moon becomes even brighter when viewed through a telescope. With large telescopes, observing at full moon can cause significant eye strain and impair your night vision when you move your eye away from the eyepiece. This moon filter reduces the amount of light, allowing you to observe the moon in comfort. The moon filter features a screw thread for 31.7 mm eyepieces. FEATURES Moon filter for 31.7 mm eyepieces Reduces the brightness of the moon Protects your eyes against bright moon light Weight: 10 g
With this adapter, you can operate your Bresser MCX 102/127 Goto telescope, BRESSER 80/400 Goto or National Geographic 70mm/90mm Goto telescope using a 230V~ wall connector.
Astronomik ProPlanet 742 IR-pass filter Ideal filters for the reception of the moon and planets, notably Mars, with telescopes from 6” (150mm) aperture. The ProPlanet IR 742 only allows infrared light with wavelengths of more than 742 nm to pass. In this wavelength range the effects of seeing are significantly lower than in the visible spectrum of the human eye. This allows much sharper images than are usually obtained from your device and location. Another advantage is that the sky background of advanced dawn is dark and so the filter even allows photography of the planets and the moon at daylight. Main use The Astronomik ProPlanet IR 742 cuts off the visible part of the spectrum and allows the light of wavelengths longer then 742nm to pass. Due to this behavior the part of the spectrum that is most sensitive to bad seeing is rejected. This approach does a big improvement to the imaging of planets and the moon. The image is more steady than the image in the visible light with nearly identical exposure times.
The Omegon 3x Barlow lens trebles the magnification when used together with an eyepiece. The 1.25" eyepiece is simply inserted into the Barlow lens and secured with the side locking screw. You then insert the complete assembly into the focuser. For example, if you normally get 20 x magnification with your eyepiece, this is then increased to 60 x with the Omegon Barlow lens. If you want to initially do without having to acquire a complete set of eyepieces, then this Barlow lens fits the bill.
The 32 mm Super Plössl eyepiece provide maximum true apparent field of view with 1.25” barrel size. A larger field of view can only reached with 2” eyepieces. The TSSP32 is an ideal overview eyepiece and locating eyepiece. It can be used with almost any telescope. Super Plössl eyepieces have been very popular among amateur astronomers for a long time. The convince with an effective and proven optical design. Teleskop Service offers this eyepiece type in best possible quality. Super Plössl eyepieces are perfect for amateur astronomers who put emphasis on a good image which is also as bright as possible. Significantly better workmanship than standard eyepieces which often have only 2-3 elements. No ”tunnel vision” through 52° apparent field of view. Multi-coated on all air-to-glass surfaces for maximum contrast and a bright image Blackened lens edges to prevent reflexes 1.25” barrel with thread for 1.25” filters - fits also to your telescope Foldable rubber eyecups - ideal against stray light and as a safe rest for your eyeglasses (no scratches) Rubber armour for a safe grip (from 20 mm focal length upwards) High contrast and fine internal blackening make the TS Super Plössl eyepieces suitable also for astrophotography. Focal lengths up to 20 mm can be used very well in eyepiece projection adapters.
