APM Barlow 2" This is the 2" counterpart of our famed 1.25", 2x/1.5x Barlow lens. It is well made both in design and craftmanship. Both lenses are fully multicoated for best-possible contrast and transmission. The lenses have a diameter of 37mm, thus you can even use 2" wide angle eyepieces without vignetting. Further uses: With a 2" extension tube - 50mm - you will attain a magnification of 2.7x compared to an eyepiece without the Barlow lens. That way you turn a 30mm wide angle eyepiece into an 11mm wide angle eyepiece with comfortable eye relief. Remove the black anodized lens cell from the Barlow lens and screw it directly into your eyepiece to attain a magnification of 1.5x.
POLARIZING FILTER 1.25” Designed to reduce the amount of light entering your eyepiece. You can progressively dim the view when observing a bright object, such as the Moon or certain planets, to a level according to your needs, whilst increasing contrast, reducing glare and increasing the amount of detail that can be studied. The 1.25” Polarizing Filter is the best all-purpose lunar and planetary filter.
Astronomik ProPlanet 742 IR-pass filter Ideal filters for the reception of the moon and planets, notably Mars, with telescopes from 6” (150mm) aperture. The ProPlanet IR 742 only allows infrared light with wavelengths of more than 742 nm to pass. In this wavelength range the effects of seeing are significantly lower than in the visible spectrum of the human eye. This allows much sharper images than are usually obtained from your device and location. Another advantage is that the sky background of advanced dawn is dark and so the filter even allows photography of the planets and the moon at daylight. Main use The Astronomik ProPlanet IR 742 cuts off the visible part of the spectrum and allows the light of wavelengths longer then 742nm to pass. Due to this behavior the part of the spectrum that is most sensitive to bad seeing is rejected. This approach does a big improvement to the imaging of planets and the moon. The image is more steady than the image in the visible light with nearly identical exposure times.
Valmistatud mustast kergest hingavast kangast. Üks ABS riba takistab kaitsekattel valgusrada tõkestada. Tõmmatavad nöörid üleval ja all. Kaitseb optikat valguse ja kaste eest. Suurem kujutise kontrastsus.
The Solar Viewers by Baader Planetarium are a high-quality product which is extremely well suited for naked-eye solar observations. The most common use-case for them is solar eclipses.As the moon passes slowly in front of the sun, you can easily observe how the sun disappears behind it through the Solar Viewer. The spectacular event of a total solar eclipse itself, which usually lasts only for a few minutes, should then be enjoyed without the glasses and safely with the naked eye.CE / ISO certified: conforms to and meets the transmission requirements for eye safety: EN ISO 12312-2:2015 – Instructions in four languages (English, German, French, Spanish) on the inner side of the solar viewer.
Baader OTP Outdoor Telescope Power 19WThis 12.8 volt /1.5 Amp switching power supply with protective-disconnect plug serves all Celestron telescopes up to the CGEM-DX series. At little higher price it offers enormous benefits compared to common department store indoor units.Conventional power supplies having a 12V nominal voltage are made for use in your "living room". When used outside in the cold the voltage will reduce with temperature. Already at -10°C the remaining voltage output may have gone down to only 10.5 V. The motors of many telescope mounts will behave erratic at such low voltage. Especially the motor driver electronics then tries to replace the missing voltage by draining ever more Amps until both - power supply and mount electronics - will stall or become damaged. Many users then blame the mount and it´s messy electronics - instead of checking wether an inadaequate power supply may be the culprit.The Baader Outdoor Telescope Power supply offers continuous 1.5 Amp/ < 12 volt DC voltage all accross the AC voltage range from 90 to 260volt. Even at extreme cold the voltage can not go down as far as to damage the electronic components or motors of your telescope mount.19 Watt/ 1.5 Amp permanent power ensure ample reserve for smooth tracking even at full photographic instrument load and high torque variations due to changing telescope balance. In addition to the outdoor voltage of 12.8V also the thermal working temperature has been designed for -25°C to +40°C.The connecting cord measures 2.5m in length. This is longer than usual to ensure that the wall plug portion of the power supply can be safely stored down the tripod legs so that the power cord will not become a trip-wire. The ellbowed plug does protect the power cable from accidental breakage and especially the telescope power input socket from damage when actually someone would trip over the cable. When accidentally the cable gets tightened the connecting ellbowed plug will release the cable straight, without ripping or damaging the power socket affixed in the telescope.
AstroSolar® Safety Film 5.0 for solar observation and photography at high magnification Size: 100 x 50 cm (~ 40 x 20 inch) – telescope quality – Optical Density (OD) = 5.0 Safe for visual solar observation (with additional optics) and imaging This highest precision film consistently produces strehl ratios of 94 to 96 percent at interferometric tests – thus it performs optically like a Fluorite Triplet Lens by Carl Zeiss or Astro Physics AstroSolar Safety Film is best suited for precision work with all astronomical telescopes and binoculars – just as well as for all photographic camera- and tele-lenses For more than 25 years on the market, the only film-material made to not deteriorate the optical wavefront, it does allow to attain high magnification with any long-range optics without reducing sharpness or contrast of the solar surface.
Conventional nominal 12V power supplies are made for use in your "living room". When used outside in the cold, their voltage will drop with temperature. At -10°C (18F), the voltage output may have gone down to only 10.5 V, and the motors of many telescope mounts will behave erratically at such a low voltage. The motor driver electronics will try to compensate for the low voltage by drawing more current (amps) until both power supply and mount electronics will fail to work properly or suffer damage. Many users blame the mount and its internal electronics when an inadequate power supply may be the culprit. The Baader Planetarium 60W Outdoor Power Supply is designed for outdoor use, just like the proven, smaller, Baader Planetarium 19W Outdoor Power Supply. Both, the elbowed disconnect plug as well as the straight pull linkage perfectly protect the power input and electronic board of the telescope against damage when tripping onto the cable. Also this protects the cable itself from breakage. Altogether the distance between telescope and power socket may reach 4 meters. This is longer than usual and assures that the power supply will not become a tripping hazard or dangle in the air. Even for larger telescopes, the power supply can be placed on the ground or onto the accessory tray of a tripod or pillar. The housing is sealed against moisture, but it is not waterproof. So, of course the plugs must not contact wet ground. The Baader Planetarium 60W Outdoor Power Supply continuously supplies up to 5 Amperes at a minimum of 12 Volts, so it is perfect for modern, powerful mounts like the Celestron Advanced VX, CGEM (DX), CGE Pro and CPC HD Deluxe. Of course, it can be used with any mount having a Celestron-Standard receptor (2.1mm x 5.5mm), requiring up to 5 Ampere.
The aluminium construction is black anodized on the inside and on the outside. FEATURES: 15mm optical path length; Telescope side T-2 internal thread; Focus side T-2 external thread; For eyepiece projection with shift/sliding focuser.
Accurate manufactured T2 extension ring with an overall length of 40mm excluding T2 external thread. This extension tube is a real problem solver for fine tuning!FEATURES: 40mm optical path length; Telescope side T-2 internal thread; Focus side T-2 external thread; For eyepiece projection with shift/sliding focuser.
With the usage of barlow lenses, you can extend the focal distance of telescopes and hence the magnification of your observated deep sky objects. Thus, you can use the advantages of eyepieces with greater focal distance like the long eye relief as well as a more convenient insight at higher magnifications. Due to their four lens design, these Barlow lenses provide a brilliant image quality for the whole visual field and are suitable for observations and photography.FEATURES suitable for observations and photography doubling of the focal lenth four lens design multi-coated SCOPE OF DELIVERY 1x Barlow lens
With the usage of barlow lenses, you can extend the focal distance of telescopes and enhence the magnification of your observated deep sky objects. Thus, you can use the advantages of eyepieces with greater focal distance like the long eye relief as well as a more convenient insight at higher magnifications. Due to their 3-element lens design, these Barlow lenses provide a brilliant image quality for the whole visual field and are suitable for observations and photography.FEATURES suitable for observations and photography increase fivefold the focal distance 3-element lens design fully multi-coated brass eyepiece clamping ring SCOPE OF DELIVERY 1x Barlow lens
Color Filter Set Essential is recommended for Moon & Planets from 50mm (2”) Aperture Essential Set includes the following filters: BRESSER Filter Red (1,25):The blue/blue green light is totally blocked. The contrast between the card and the lighter zones will enormously increase. This is truly helpful when you watch Jupiter or Saturn. Or for mars, watching the poles. BRESSER Filter Green (1,25):The green filter is to increase the contrasts enormously between the red and the blue regions of the cloud structures on the gas planets Jupiter and Saturn. Seeing our Earth Moon through the green filter, the contrasts of each ray crater become clearly more visible.BRESSER Filter Blue (1,25):The color of light blue really supports watching the high clouds on Mars. The contrast increases. The dark red structures will be shown even darker, so this is the perfect filter for watching the big red Flecks on the gas planet Jupiter. The rings of Saturn will be accentuated, the structures of the Venus Atmosphere will be even finer. BRESSER Filter Yellow (1,25):Watching the Moon surface through the filter, the contrasts will enormously increase. Same with planet Mars. On the huge planet Jupiter, when using the filter, you can even see the contrasts between the cloud-bands and a lot more details. Starting with a telescope diameter of 8“ and a clear sight, you even get to see various details of Saturn. What ist a color Filter for and do we really need it? Color Filters darken the light slightly, that reaches the eye or the sensor of the camera. This eliminates for instance stronger transitions. The result is that your picture turns out with more contrast which automatically shows more details. FEATURES Versatile colour filter set For eyepieces and accessories with 1.25” filter thread Increase contrast on moon and planets Making object details more visible
Portable power storage (mobile power bank) in maxi format from BRESSER. With a powerful and recharcheable 155Wh lithium-ion battery and various connection options, almost all common electronic devices can be operated and charged. This means that you always have sufficient energy reserve, whether for tough outdoor use, in the garden or in the event of a power failure at home. Including a switchable red light LED lamp with emergency signal function and a red light bar for orientation in the dark with over 100 hours of light duration. The Mobile Power Station is a silent and environmentally friendly alternative to power generators with combustion engines.Connection options: Charging of up to 3 x USB mobile devices such as telephones, cameras, drones etc. at the same time. Power supply for up to 3 x 12 volt devices. With the 2 adapters of 5.5/2.1mm hollow plug to cigarette lighter socket included in delivery, car/camping devices such as cool boxes, water pumps, mini compressors, air pumps etc. can be connected directly. In addition, a 230 volt, 100 watt continuous power socket can be used to connect chargers for notebooks/tablets/smartphones etc. or other electrical devices in this power class.The heart is the built-in battery: A powerful 155Wh 13Ah/12Volt (42000mA/3.7V) lithium-ion battery. Rechargeable within 8 hours with the included 230V charger or 12V car battery charging cable. A clear display shows you all relevant information such as battery charge status, battery charging process, AC output ON/OFF.Extensive electronic protection of all current inputs and outputs: against short circuit, overvoltage, over- and deep discharge of the battery and against overheating. Please note that for use with our astronomy mounts, such as the EXOS-2 Goto, the adapter cable 4930100 is additionally required. FEATURES Portable energy storage (Power Bank) Self-sufficient power supply for outdoor, hobby and professional use Charging and operation of various electrical appliances Many connection options and adapters included Environmentally friendly alternative to power generators Powerful 155Wh 13Ah/12 Volt (42000mA/3.7V) lithium ion battery 3 x USB (each 5-9 Volt 2.1 Ampere) 3 x 12 Volt DC out 5.5/2.1mm hollow plug (additional max. 15 Ampere /180 Watt) 1 x 230 Volt AC out (100 Watt continuous power) Modified sine wave for 230 Volt output Bright red light LED lamp with over 100 hours light duration Red light bar can be switched on as an orientation aid in the dark Indication of battery charge status on display Input charging socket: 15 Volt / 2 Ampere Charging time 0-100% approx. 8 hours Temperature range: from -10 to +40 degrees Celsius Lifetime/charging cycles: >500 times SCOPE OF DELIVERY Power Station with battery Charger 230 Volt Car charger 12 Volt Adapter 5.5/2.1mm to cigarette lighter socket (2 pcs.) UK socket adapter for 230V output Instruction manual
An amici prism allows for a comfortable 90° viewing position and creates an erect image without left-right reversal. This makes it especially suitable for nature observations but it can also be very helpful with astronomical observations. Particularly beginners may find it easier to orientate in the sky when they compare the view through the telescope with what they can see with their naked eyes.With this amici prism an astronomical telescope can be used as a powerful spotting scope.Suitable for refractor telescopes as well as Maksutov-Cassegrain style telescopes with 1,25” visual back.FEATURES comfortable eye relief for refractor telescopes 90°- viewing position and image without left-right reversal astronomical telescope turns to a powerful spotting scope 1,25” visual back SCOPE OF DELIVERY Amici Prism 90° 31.7mm/1.25”
Flexibility and precision, that's what BRESSER ball heads stand for.By means of the 360 degree rotatable and additionally 90 degree tiltable ball joint the camera can easily be brought into any desired position. For panoramic photos the ball head is also equipped with a 360 degree rotatable base plate. Both, the ball joint as well as the panoramic base plate can be moved smoothly and jerk-free and locked in place securely with the corresponding knobs. The integrated circular bubble level and the angle scale help with the exact positioning.The quick release plate allows for a quick and uncomplicated exchange of cameras. The BH-51MT ball head is suitable for all heavy DSLR and medium format cameras up to a total weight of 10 kg. With 1/4 inch tripod connection thread. FEATURES sturdy metal ball head for cameras up to 10 kg rubber coated quick release plate for shock absorption 1/4 inch photo screw integrated circular bubble level 360° rotatable base plate with angle scale 1/4 inch tripod thread SCOPE OF SUPPLY Ball head Quick release plate Manual
Mitmekülgse kahevärvilise LED rõngasvalgustiga on komplektis kaasas mobiiltelefoni hoidik, kaamera tõstemehhanism ja statiivi hoidik. Nii saad Sa nautida täielikku paindlikkust toidu-, toote ja isegi portreefotode tegemisel oma leidlikuks sisuloomeks Internetis. BRESSER BR-22B kahevärviline LED rõngasvalgusti on ideaalne lahendus nii harrastajatele kui ka professionaalidele. Oma tugevamaid külgi näitab valgusti eelkõige moe- ja ilufotograafias. Vlogijatele ja blogijatele on rõngasvalgusti oluline tööriist ka ainulaadse sotsiaalmeedia sisu loomisel, kuna tagab modelli optimaalse valgustamise, vähendab varjusid ning loob pehme ja ühtlase valguse. Mobiiltelefonide ajastul on painduv kuul-pesa ühendusega nutitelefoni hoidik loomulikult kohustuslik. Rohkem vabadust asukoha valikul: rõngasvalgusti saab valikuliselt toite juhtmevabalt NP F550/750/970 V-Lock akult (ei kuulu komplekti). BRESSER rõngasvalgusti kasutamine on äärmiselt lihtne. 192 LED-valgusti heledust ja värvitemperatuuri saab vastavalt soovile reguleerida kahe keeratava nupu abil. Lisaks on valgustit lihtne transportida - ideaalne võimalus pööraste ja lahedate ideede rakendamiseks sotsiaalmeedias või isegi veebiseminaridel ja konverentsidel. Stuudiotööks ühenda statiivikinnitus, mida saab kasutada ka käepidemena, lihtsalt lambi aluse külge. TUNNUSED Ideaalne blogijatele ja vlogijatele Stuudio-, ilu- ja toidufotograafia Lihtne kasutada Reguleeritav värvitemperatuur alates 3200 K kuni 5600 K Lõpmatult hämardatav 10-100 192 üliheledat LED-lampi Võimsus: 22W Võrgutoide: AC 100-240V 50/60Hz Valikuline akutoide: NP F550/750/970 (ei kuulu komplekti) KOMPLEKTIS ON BRESSER BR-22B kahevärviline LED rõngasvalgusti Kuul-pesa ja Thread Hot Shoe kinnitus Nutitelefoni hoidik Käepide/statiivikinnitus kallutatava peaga Toitejuhe Kott
The BRESSER Telescope Camera Adapter is the connecting piece between your 35 mm DSLR camera and the telescope. The connection to your camera can be achieved with the fitting T2-mount (T2-mount optional). For the focal fotography, you need to unscrew the bottom part of the adapter and attach the camera with the fitting T2-mount directly to the push-on contact. The eyepiece projection is possible when you put an eyepiece into the adapter and tighten the knurled screw. After that, you have to attach the T2-mount and the camera and you are ready to go.FEATURES Eyepiece connection diameter: 31.7 mm (1.25”) Eyepiece total diameter max. 35mm SCOPE OF DELIVERY Telescope Camera Adapter 1.25”
Connect your BRESSER Microscope or Telescope with a Canon EOS SLR camera and take images or videos* of your observed object! T-Mounts are the connecting piece between the camera adapter and the SLR camera. Please read the instruction manual of your camera to find out which T-Mount you need, look into the instruction manual of your camera.FEATURES connecting piece between the camera adapter and a Canon EOS SLR camera; high-quality and precise workmanship made of metal; a corresponding camera adapter is needed.
Discover the first steps of electrical engineering. Due to its comprehensive manual you can build up your own electrical maze. This science kit provides not only fun during engineering the electrical maze but also afterwards when you and your friends try to solve the electrical maze.An illustrated manual explains step by step how to build up your electrical maze.LEARN How an electrical circuit works How different components of an electrical circuit react together How can solve the electrical maze in the easiest kind of way SCOPE OF DELIVERY Metal wire Wand Buzzer LED light Resistor Base plate Plastic pins (2 pieces) Spring connectors (4 pieces) Battery compartment Batteries, AA type (2 pieces)
Discover the first steps of electrical engineering. Due to its comprehensive manual you can build up an entire workable motion sensor out of this science kit. Furthermore, there is a short explanation of the typical functionalities included. An illustrated manual explains step by step how to build the motion sensor. DISCOVER How an electric circuit works How a motion sensor works How to use a motion sensor SCOPE OF DELIVERY Baseplate Micro controller board Buzzer Photo sensor Sensor stand (2 pieces) Spring connector (6 pieces) Battery compartment Batteries, AA type (2 pieces)
The BRESSER Junior Microscope 40x-640x is perfect for beginners to explore the microcosm !The extensive accessories included with the microscope offer the perfect basic equipment to get started right away.The practical carrying case allows you to take your microscope with you wherever you go and share your observations with friends and family at any timeWith this microscope your journey into the microcosm begins!FEATURES LED transmitted-light Height-adjustable stage Invisor wheel for adjusting the light beam Object clamps for attaching the specimens all-purpose thanks to battery operation low weight, therefore excellent for mobile use Zoom-Ocular Li>Comprehensive accessories for quick access to microscopy SCOPE OF DELIVERY 1x microscope 3x AA batteries practical carrying case cover glasses & slides permanent preparations: Yeast, sea salt, shrimp eggs, inclusion agent Gum-Media, empty container Microscope cutlery Immediator wheel/filter disc Measuring cylinder Shrimp hatcher MicroCut for preparation of preparations Petri dish 1x Operating instructions ssories included with the microscope offer the perfect basic equipment to get started right away.The practical carrying case allows you to take your microscope with you wherever you go and share your observations with friends and family at any timeWith this microscope your journey into the microcosm begins!FEATURES LED transmitted-light Height-adjustable stage Invisor wheel for adjusting the light beam Object clamps for attaching the specimens all-purpose thanks to battery operation low weight, therefore excellent for mobile use Zoom-Ocular Li>Comprehensive accessories for quick access to microscopy SCOPE OF DELIVERY 1x microscope 3x AA batteries practical carrying case cover glasses & slides permanent preparations: Yeast, sea salt, shrimp eggs, inclusion agent Gum-Media, empty container Microscope cutlery Immediator wheel/filter disc Measuring cylinder Shrimp hatcher MicroCut for preparation of preparations Petri dish 1x Operating instructions
This table clamp magnifier is the perfect tool for work at the desk. With the large lens diameter of 175mm and a 2-fold magnification, you will see even small details. The additional LED illumination is very helpful in low light conditions.FEATURES Lens Diameter: 175mm; Magnification: 2x ; Illumination: LED; precise adjustment due to 3 joints.
Connect your telescope with a Nikon camera and take images or videos of your observed object! T-Mount is the connecting piece between the camera adapter and SLR camera. To find out what T2-ring you need, look into the instruction manual of your camera.
The rimless led reading magnifier has a large lens of 88 mm with 2x magnification and additional LED-illumination so that the magnifier is perfect designed as a reading assistance. Furthermore, it is equipped with a second lens of 20 mm with 4x magnification. The LED-illumination of this magnifier and the tow different magnifications make your explorations easier.
Extension tube with 2” plug diameter and an extension factor of 35mm. A ring clamp ensures an optimal attachement of 2” accessories. The blackened and ridged inside effectively prevents reflections. Also a 2” filter thread is inside.
Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price.All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available.All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces.FEATURES Focal length: 10 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubb
Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price.All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available.All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces.FEATURES Focal length: 25 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack
Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price.All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available.All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces.FEATURES Focal length: 40 mm Field of view: 46° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack
With this adapter, you can operate your Bresser MCX 102/127 Goto telescope, BRESSER 80/400 Goto or National Geographic 70mm/90mm Goto telescope using a 230V~ wall connector.
Camera adapter for Schmidt-Cassegrin or ACF telescopes Enables focal photography 5 adapter sleeves (5/7.5/10/15/30 mm) Can be screwed directly to the rear end of the tube Scope of delivery: Photo adapter with 50.8 mm (2")
Connect your BRESSER Microscope or Telescope with a Sony System camera and take images or videos* of your observed object!T-Mounts are the connecting piece between the T2 camera adapter and the system camera. Please read the instruction manual of your camera to find out which T-Mount you need, look into the instruction manual of your camera.The adapter will provide the necessary distance extension between the flange focal length of 18mm for E-Mount and 55mm for T2.For Sony NEX or ILCE cameras with E-Mount bajonet (e.g. Sony Alpha 6000, Sony A7S / A7R)SCOPE OF DELIVERYT2-Ring für Sony E-Mount camerasFor Sony NEX, ILCE Cameras (e.g. A7S, A7R)
The bright moon becomes even brighter when viewed through a telescope. With large telescopes, observing at full moon can cause significant eye strain and impair your night vision when you move your eye away from the eyepiece. This moon filter reduces the amount of light, allowing you to observe the moon in comfort. The moon filter features a screw thread for 31.7 mm eyepieces. FEATURES Moon filter for 31.7 mm eyepieces Reduces the brightness of the moon Protects your eyes against bright moon light Weight: 10 g
Take pictures with your smartphone through the telescope or microscope? With the Smartphone camera adapter this is now child’s play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed. FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25”) eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxe Locking ring for the smartphone
Tērauda korpuss, kas piemērots S12 meža kamerām aizsargā jūsu kameru no dzīvniekiem un ekstremāliem laikapstākļiem. Korpusam ir plašas bloķēšanas un montāžas iespējas, kā arī to var aizslēgt ar atsevišķu stiepļu slēdzeni vai piekaramo atslēgu. Meža kameru var izmantot arī ar ārēju barošanas avotu, kad tā ir ievietota korpusā. PIEZĪME! Šis drošības futrālis ir saderīgs ar Burrel S12 taku kamerām.
If you are loading extra equipment on your Equatorial Mount, you may need additional counterweights. This anodized counterweight weighs 11 lb., or 5 kg. A sturdy knurled knob locks the counterweight safely in place.This 11 lbs Counterweight Accessory is designed for Celestron's telescopes with a 0.75" shaft hole size.
Your NexStar carrying case is designed to safely carry your NexStar 4/5/6 telescope as well as any Celestron 8" SCT/EdgeHD optical tube. The case is EVA molded to protect your telescope with a hard yet flexible shell. Your case also comes with a convenient storage zipper pocket that holds all your telescope's standard accessories with room to expand. Inside the case includes two dense foam spacers and a built-in compression strap designed to customize the case for each telescope model. Includes a durable Nylon handle for easy transportation. External Dimensions: 23” x 15” x 14”.Internal Dimensions: 19” x 11” x 10”.
The Celestron 1.25” Eyepiece and Filter Kit is a great way to expand the functionality and enjoyment of your telescope. Inside the metal, foam-lined carry case you’ll find these accessories:32 mm Plossl Eyepiece - 1.25”;17 mm Plossl Eyepiece - 1.25”;13 mm Plossl Eyepiece - 1.25”;8 mm Plossl Eyepiece - 1.25”;6 mm Plossl Eyepiece - 1.25”;2X Barlow Lens - 1.25”;#80A Blue Filter - 1.25”;#58 Green Filter - 1.25”;#56 Light Green Filter - 1.25”;#25 Red Filter - 1.25”;#21 Orange Filter - 1.25”;#12 Yellow Filter - 1.25”;Moon Filter - 1.25”.Eyepieces - All five Plossl eyepieces can be used in any telescope with a 1.25” focuser. Each eyepiece features a four-element design with a 52º apparent field of view. The optics are fully multi-coated to improve light transmission and protect the optics. The 32 mm Plossl eyepiece offers a low power, wide field view in most telescopes, the 13 mm & 17 mm focal lengths are good medium-power oculars, and the 8 mm & 6 mm eyepieces provide high magnifications, great for the Moon and planets, especially when seeing conditions are good.2X Barlow Lens - The included, and very versatile 2X Barlow doubles the magnification of any 1.25” eyepiece. Since this kit includes five (5) eyepieces, you will be able to use them with and without the Barlow, giving you a total of ten magnification options in all. Any other 1.25” eyepieces you already have will also work in this desirable accessory, giving you even more magnification choices. Remember, high magnifications do not always produce clear, sharp results, especially on evenings of poor or moderate seeing conditions. Experiment to find the magnifications that are best for your telescope on a particular night.Filters - Colored filters can be used to bring out certain details on a planet’s surface or its cloud structure. All of the planetary filters included in the 1.25” Eyepiece & Accessory Kit, as well as the Moon filter, can be used on any 1.25” eyepiece with the proper filter threads, so they are very versatile. Just screw one onto your eyepiece of choice and slide it into the focuser.The Moon filter is one of the first accessories most new amateur astronomers buy and for good reason! It helps block out a portion of the light the Moon sends into your eyepiece so that you can see details better. You can also try this filter on Venus; it blocks enough glare so you can observe the planet’s phases more easily.Metal Case - The sturdy metal carry case has die-cut foam inside to protect and cushion your accessories. Store each one in its appointed place when not in use and you’ll keep them looking and performing like new. The case is even large enough to carry a few extra accessories. Just pull out enough of the foam cubes to make a nest for your eyepiece, camera adapter, etc. A tight fit is better, so remove the least amount of foam possible before testing the fit. You can always remove more if you need to.
The Celestron 1.25” Star Diagonal slides into the focuser (1.25”) of your refractor or catadioptric telescope and accepts standard 1.25” eyepieces, allowing you to view objects more comfortably. A diagonal that is angled at 90º helps avoid neck strain when looking through the eyepiece.Please note that a 90º diagonal will display images that are right side up, but left to right orientation will be reversed.
This 1.25” accessory can be used three ways: as a 2X Barlow for visual use, as a prime focus T-adapter, or as a “Barlowed” T-adapter for double the magnification and the benefit of extra inward focus travel. The Universal Barlow & T-Adapter can be used as a 2X Barlow right out of the box. Insert any 1.25” eyepiece into the chamber and you’ll enjoy double the magnification while retaining all the eye relief of the inserted eyepiece. The Celestron Universal Barlow & T-Adapter can also be used for prime focus photography, which means you use the telescope as a photographic lens—a very big photographic lens! Just unscrew the bottom section of the unit to remove the Barlow and slide the chrome barrel into the telescope’s 1.25” focuser or adapter. Lock it firmly in place with the focuser or adapter thumbscrew. T-threads on the top of the adapter screw into a T-Ring (sold separately) that is designed to attach to the brand-specific mounting flange of your DSLR or SLR camera.
Bug out with this set of 4 real, 3D insect specimens perfectly preserved in resin. These specimens are ideal for observing and imaging with any Celestron digital microscope. Crystal clear resin lets you observe the insects from all angles. Use them for school projects, research, and more.These specimens make the perfect gift for the young scientist in your life. They'll love learning about fascinating insects from around the world, and studying their anatomy up close. Your little entymologist can even display the insects in his or her room when not in use.This kit includes a real scorpion with pincers and a stinger, a blackish stag beetle, a longhorn beetle with dramatic antennae, and a bright red fire bug.Celestron offers 3 sets of 3D bugs to choose from: collect them all!
