Expand your UniFi Video surveillance system with the versatile G3-FLEX camera. Features: - Full HD 1080p resolution - Built-in IR illuminators for night vision - Powered by 802.3af Power over Ethernet - High sensitivity microphone - Wall mount, pole mount, and flat surface mounts included - Weather resistant for outdoor operation
Screw kit for installing AXIS P55-E Series with either AXIS T91L61 or AXIS T91G61 Wall Mounts. Single-pack includes 3x bayonet screws, 3x securing screws, 3x springs and an installation guide
Description The Infopanel module helps you place such information into the intercom installation as house number, opening hours and similar data. The Infopanel backlight is software controlled. Vendor Homepage www.2n.cz/en_GB/products/intercoms/2n-helios-ip-verso/infopanel Unit Gross Weight 0.18 kg Unit Net Weight 0.16 kg Shipping box quantity 1 Unit Brutto Volume 0.000429 cubm Shipping/Package Box Dimensions Shipping Box Width 11 cm Shipping/Package Box Dimensions Shipping Box Depth 13 cm Shipping/Package Box Dimensions Shipping Box Height 3 cm Shipping/Package Box Dimensions Shipping Box Weight 0.18 kg
Capture every detail with the 4K resolution G4-PRO camera. The G4-PRO is our most powerful camera yet, with a large 1/2" image sensor, 3X powered optical zoom lens, and integrated high-power infrared LEDs for night vision. The adjustable base can be mounted to a flat surface or a pole with the included mounting hardware.UniFi Video G4-PRO CameraDimensionsLength: 153mm (6.02") Diameter: 86mm (3.39")Weight0.7kg (1.54lb)EnclosurePC/TPE/Aluminum Alloy(ADC-12 + Liquid Coating)Networking Interface(1) 10/100/1000 Mbps Ethernet PortSensorOS08A10, 1/2"LensF 4.1mm - 12.3mm; f/1.53 -f/3.3LEDLED RingField of View Wide Tele 108° (H), 58° (V), 125° (D) 37° (H), 20° (V), 43° (D)Night ModeIR LEDs with Mechanical IR Cut FilterVideo CompressionH.264Resolution4K2K (3840 x 2160)Max. Frame Rate24 FPSImage SettingsFlip, Brightness, Contrast, WDR, Hue, Infrared, Sharpness, Saturation, Denoise, 50/60 Hz Flicker ReductionManagement Interface Managed Mode Standalone Mode UniFi Protect Camera Integrated Web UIMicrophoneYesMax. Power Consumption12.5WPower MethodIEEE 802.3af/atPower Supply802.3af/802.3at or UniFi PoE SwitchButtonsFactory Reset ButtonMountingWall, Ceiling, Pole (Kits Included)Operating Temperature-20 to 50° C (-4 to 122° F)Operating Humidity0 to 90% NoncondensingWeatherproofingIP67
Home Energy Meter Gen5 3 phase You hear a lot about energy use these days. About how if we reduce the amount of energy we use we can not only save money but also save the environment. But saving money by using less electricity is only possible if we understand when and how we use it. That’s what Aeotec’s Z-Wave Home Energy Meter provides you with – understanding. Installed in an electricity box, the energy meter will monitor the total consumption of electricity used by an entire building. And its intelligent clamps will report that energy use back to your Z-Wave gateway or controller, in watts or kilowatt-hours, and in real time. So you can see how much electricity you really use and when you use it.
FIBARO Button is a compact, battery-powered, Z-Wave Plus compatible device. It allows you to control devices through the Z-Wave network and run various scenes defined in FIBARO System. Different actions may be triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene. With its small design and wireless communication, the FIBARO Button can be conveniently mounted on any surface and in any position or location at home, e.g. beside the bed or under the desk. Compatible with any Z-Wave or Z-Wave+ Controller. Supports protected mode (Z-Wave network security mode) with AES-128 encryption. Completely wireless with battery power and Z-Wave communication. May be installed anywhere in your home. Extremely easy installation – simply add and put on desired surface.
