3D printerid ja tarvikud

Plastikukomplekt Print-Me Mixed Swift PETG, SmartFit PLA, Smooth ABS, Flex 20D, Flex 40D, 1,75 mm, 1,2 kg, 12 värvi.

"Creality Ender-3 V3 3D-printer on tipptasemel seade nii harrastajatele kui ka professionaalidele, kes soovivad oma loomingulised projektid täpselt ja lihtsalt ellu viia. See kasutajasõbraliku disaini ja suurepärase printimiskvaliteedi poolest tuntud 3D-printer pakub ideaalset tasakaalu taskukohasuse ja jõudluse vahel. Ender-3 V3 on vastupidav ja stabiilne ning sellel on tugev metallraam, mis tagab vastupidavuse ja vähendab vibratsiooni, parandades seeläbi printide üldist kvaliteeti. Sellel printeril on täiustatud emaplaat, mis toetab vaikset samm-mootori draiverit, mille tulemuseks on vaiksem ja rahulikum printimiskeskkond. Selle võimas ekstruuder on loodud nii, et see vähendab ummistumist ja tagab ühtlasema ekstrusiooni, mis tagab ühtlase väljundi. Ender-3 V3 uuenduslikul disainil on eemaldatav ja paindlik magnetiline trükialus, mis võimaldab valmis objekte hõlpsasti eemaldada ilma printimispinda kahjustamata. See omadus mitte ainult ei lihtsusta eemaldamisprotsessi, vaid vähendab ka oluliselt kunstiteose kahjustamise ohtu. Intuitiivne kasutajaliides ja kasutajasõbralik LCD-ekraan muudavad printeri käsitsemise ja selle funktsioonides navigeerimise sujuvaks ka algajatele. Lisaks toetab printer laia materjalivalikut, mis annab kasutajatele paindlikkuse katsetada erinevate filamentidega, nagu PLA, ABS, PETG ja muud, muutes selle ideaalseks paljude erinevate rakenduste jaoks, alates prototüüpidest ja funktsionaalsetest osadest kuni kunstiliste mudelite ja hariduslikel eesmärkidel kasutamiseni. Creality Ender-3 V3 üks silmapaistvamaid omadusi on selle muljetavaldav trükimaht, mis võimaldab printida suuremaid projekte kui paljud teised printerid oma klassis. Seadet saab kiiresti kokku panna, kuna eelnevalt kokkupandud osad lihtsustavad seadistamisprotsessi ja tagavad, et printimist saab alustada peaaegu kohe karbist välja. Samuti sisaldab see turvaelemente, nagu näiteks printimise jätkamise funktsioon, mis võimaldab printeril voolukatkestuse korral peatada ja uuesti käivitada, säästes nii aega ja filamenti. Tänu regulaarsetele uuendustele ja aktiivsele kogukonnale on kasutajatel juurdepääs rikkalikule toele ja ressurssidele, et lahendada probleeme ja parandada oma printimiskogemust. Olenemata sellest, kas alustate 3D-printimise maailmaga või soovite olemasolevat seadet uuendada, pakub Creality Ender-3 V3 3D-printer erakordset väärtust ja kvaliteeti, mis tagab teie loominguliste visioonide täpse ja usaldusväärse elluviimise.

nFEP vabastuskile 220×180×0,15mmKõrge määrdevooluga valguse eraldusjõudKõrge UV-läbivuse tasePehme ja vastupidavTugev kohanemisvõimeSpetsiaalselt vaiguprinteritele:HALOT ONE PLUS / HALOT ONE PRO / HALOT ONE / LD-002H ja muud printerid, mis trükivad alla 8 tolli suurusi.

LCD vaiguga 3D-printeritele HALOT-R6、HALOT-ONE ja alla 6,6-tollise ekraaniga vaiguga 3D-printeritele.

Suurepärane valik täpse liikumise jaoksKõrge täpsusega trükkimineSuure kiirusega printiminePikk kasutusigaLihtne muuta

Ränikarbiidist (karborundum) klaasplaat kleepub väga hästi enamiku trükiplastide külge ja on ka hea soojusülekandega. Trükitud tooted tulevad tavaliselt kergesti ja puhtalt mahaEnder-3 seeria printerite jaoksSuurus: 235mm x 235mm Kirjeldus on tõlgitud automaatse tõlke abil. Kui märkate mingeid erinevusi, palun teavitage meid e-posti teel

Kirjeldus: Kuumutuspea Creality Ender-3 Ender-3Pro jaoksTäielik hotend pea Ender-3 printeril

Creality 4004090035

Creality RaptorX 3D scannerCreality RaptorX is an advanced 3D scanner designed for professional users. Equipped with NIR structured light technology, it guarantees exceptional scanning accuracy and speed. Thanks to its compact and wireless design, it will perform well in a variety of working conditions even in intense lighting - up to 100,000 lux in 34 laser line mode. In addition, the RaptorX offers a wide range of applications, from scanning complex objects to precise high-resolution detail mapping.Superior scanning quality and versatile applicationsThe RaptorX achieves an accuracy of 0.02 mm + 0.06 mm/m and a resolution of up to 60 fps, allowing it to capture even the smallest detail. Its full-color scanning capability makes it ideal for projects requiring surface analysis. The device handles objects ranging in size from 5 mm³ to 4 m³, making it a versatile tool for scanning small parts, silhouettes or large mechanical parts.Scanning modes to suit different needsThe RaptorX offers different scanning modes: manual scan for greater freedom, stationary scanning with automatic platform rotation, detail scanning for mapping the smallest parts, and a mode for scanning large objects. This makes the device ideal for a variety of industries, such as automotive, medical, and art.Mobility and convenience of useThe wireless design and low weight of just 405 g make the Creality RaptorX extremely convenient for everyday use. The scanner is equipped with a rechargeable battery that allows for about 4 hours of uninterrupted operation and charges to 80% in about 1.5 hours. This makes the device perfect for both in the studio and in the field.NIR Structured Light Scanning - markerless scanningCreality RaptorX uses NIR (Near Infrared) Structured Light technology, which enables scanning without the need for markers. With One-Shot 3D Imaging technology, the scanner provides stability and reduces the risk of losing track of an object. This feature streamlines manual scanning, making the process smooth and convenient.Reliable scanningThe RaptorX is equipped with a unique face and body mapping algorithm, which allows for precise reproduction of details such as hair and body contours. A full-body scan will take just 2 minutes. In addition, the device supports scanning in full 24-bit color palette, which allows for accurate color reproduction of objects. Thanks to its high material adaptation, the RaptorX is able to scan black and metallic objects without the need for sprays or coatings, saving time and increasing convenience.High quality optical componentsThe RaptorX scanner is equipped with a 3D camera with a resolution of 2.3 million pixels. The nine-element glass lens ensures minimal distortion and great depth of field. The metal lens design increases durability and stability of operation even in harsh conditions.CrealityScan softwareThe scanner works with the intuitive CrealityScan software, which offers advanced features such as point cloud editing, face and body scan mode and one-click calibration. The software is compatible with many popular programs such as SolidWorks, Maya and Blender, making it easy to integrate scans into further design processes.Includedscannerscanner holderglass calibration platequick releasemagnetic phone holderwireless WIFI 6 USB adapteradapter + adapterUSB 3.0 to USB-C cableScan Bridge cablecharging cablereflective marking points (D6mm*40 sheets, D3mm*40 sheets)USB-C adaptercleaning clothlanyarduser manual Scanner holderManufacturerCrealityCompatibilityCR-Scan Otter, CR-Scan Raptor, Creality RaptorXWiFi protocolsWiFi6, backward compatibilityFrequency band5 GHzTransfer speedParallel line mode: ≤50 fps; infrared mode: ≤30 fpsBattery typeLithiumBattery capacity5000 mAh (2 pieces)Fast charging power30 WFast charging protocolPD / AFC / FCPCharging portType-CInterfaceUSB-A / USB3.0Power interfaceDC12V / USB5VPhone holderMagneticPower buttonMechanicalScan start buttonMechanicalDimensions193.7 x 119.8 x 81.7 mmWeight444 gOperating temperature rangeFrom -10°C to 40°COperating humidity0-90%RH ScannerManufacturerCrealityScanning modes7 blue parallel laser lines / 34 blue laser lines / NIRAccuracyUp to 0.02 mm (7 blue parallel laser lines / 34 blue laser lines); up to 0.1 mm (NIR)Volume accuracy0.02 mm + 0.6 mm/m (7 blue parallel laser lines / 34 blue laser lines); 0.05 mm + 0.1 mm/m (NIR)Scanning frequency420,000 measurements/s (7 blue parallel laser lines); 1.020000 measurements/s (34 blue laser lines); 3.580000 measurements/s (NIR)3D resolution0.02-2 mm (7 blue parallel laser lines / 34 blue laser lines); 0.1-2 mm (NIR)Scanning speedUp to 60 fps (7 blue parallel laser lines / 34 blue laser lines); up to 20 fps (NIR)Minimum scanning volume5 x 5 x 5 mm (7 blue parallel laser lines / 34 blue laser lines); 150 x 150 x 150 mm (NIR)Single capture range270 x 170 @ 300 mm (7 blue parallel laser lines); 270 x 170 @ 300 mm / 341 x 232 @ 400 mm / 397 x 290 @ 500 mm / 452 x 348 @ 600 mm 600 mm TBD (34 blue laser lines); 630 x 550 @ 1000 mm (NIR)Working range150-400 mm (7 blue parallel laser lines); 200-600 mm (34 blue laser lines); 170-1200 mm (NIR)Color mappingyesAlignment modeMarker (7 blue parallel laser lines / 34 blue laser lines); marker / geometry / texture (NIR)3D imaging camera resolution1920 x 1200Additional RGB color light12 white LEDsExternal scanningLess than 50,000 lux (7 blue parallel laser lines); less than 10,000 lux (34 blue laser lines); less than 30,000 lux (NIR)Marker recognition support12 blue LEDsLaser safety (eye protection)Class I (7 blue parallel laser lines / NIR); Class II (34 blue laser lines)ButtonmechanicalIMU supportyesOutput formatOBJ / STL / PLYInput voltage12V/2AInterfaceUSB-C/USB3.0Dimensions215 x 50 x 74 mmWeight405 gCalibration platePrecision glass calibration plateWireless scanningyesSystemWindows, MacOSOperating temperature-10°C to 40°CWorking humidity0-90%RH

ELEGOO quadruple print head mounting plate for OrangeStorm GigaThe ELEGOO quadruple print head mounting plate is a comprehensive kit for mounting four extruders on the OrangeStorm Giga 3D printer. This allows you to print in four colors simultaneously, for example. With a solid, well-thought-out design, the product provides a reliable, stable mounting, eliminating vibrations and ensuring high precision printing.IncludedMounting plateHM screws 4*10 x4Mounting blockWiresClamping bands ManufacturerELEGOOModel50.204.0102CompatibilityELEGOO OrangeStorm Giga printer

ASA (acrylonitrile-styrene-acrylic) filament from ROSA3D is a polymer resistant to UV radiation, moisture and heat. ASA‘s resistance to UV radiation makes it a suitable material for outdoor applications, e.g. parts that will be intensively exposed to the sun and various weather conditions. ASA is ideal when you need a high-performance material that will be less problematic than printing from ABS. The filament has less shrinkage and the vapors produced are much less irritating. The softening point of ASA prints is higher compared to PLA and PET-G, there is no signs of deformation up to a temperature of approx. 94 ° C. The unique mechanical and thermal properties of ASA together with excellent resistance to UV radiation make it a great choice for automotive, marine and exterior applications such as mirror, radiator or sensor covers. Recommended printing parameters: extrusion temperature 220-250°C bed temperature: 90-110°C The adhesion of the first layer can be improved with ASA slurry (ASA material dissolved in acetone).It is recommended to print in a closed chamber. PRODUCT PARAMETERS Color: gray Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.07 g/cm3 Odor: almost odorless Vicat softening point: 94 ° C (ASTM 1525) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,02 Tensile elongation: 35 % Tensile strength (to break): 40 MPa Printable model for refill spool sides you can download here:

ASA (acrylonitrile-styrene-acrylic) filament from ROSA3D is a polymer resistant to UV radiation, moisture and heat. ASA‘s resistance to UV radiation makes it a suitable material for outdoor applications, e.g. parts that will be intensively exposed to the sun and various weather conditions. ASA is ideal when you need a high-performance material that will be less problematic than printing from ABS. The filament has less shrinkage and the vapors produced are much less irritating. The softening point of ASA prints is higher compared to PLA and PET-G, there is no signs of deformation up to a temperature of approx. 94 ° C. The unique mechanical and thermal properties of ASA together with excellent resistance to UV radiation make it a great choice for automotive, marine and exterior applications such as mirror, radiator or sensor covers. Recommended printing parameters: extrusion temperature 220-250°C bed temperature: 90-110°C The adhesion of the first layer can be improved with ASA slurry (ASA material dissolved in acetone).It is recommended to print in a closed chamber. PRODUCT PARAMETERS Color: white Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.07 g/cm3 Odor: almost odorless Vicat softening point: 94 ° C (ASTM 1525) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,02 Tensile elongation: 35 % Tensile strength (to break): 40 MPa Printable model for refill spool sides you can download here:

PCTG is an advanced 3D printing filament, belonging to the same polyester family as the popular PET-G. Compared to PET-G, PCTG has higher impact strength, heat resistance (up to 76°C) and transparency. It offers an interesting alternative to PET-G. Like PET-G, PCTG does not require a heated print chamber, making it an excellent choice if you plan to print on open hobby printers.PCTG is characterized by high flexibility, strong adhesion between layers, high viscosity and minimal shrinkage. Its characteristics enable easy and efficient printing, even for those without much 3D printing experience. 3D printing using PCTG is widely used in various sectors. In industry, it is an ideal choice for creating parts, small batch production and usable models, confirming the versatility of this material. The automotive sector also benefits from the advantages of PCTG, using it to print accessories, components in the engine compartment, vehicle component housings, as well as components such as air intakes and fluid inlets (chemical resistance). In the world of sport, PCTG proves its value in the production of various types of accessories, protectors, etc. The properties of this material guarantee not only the high durability of the finished prints, but also their aesthetics and functionality. APPLICATION- spare parts,- small batch production,- utility models,- engine compartment accessories and components,- vehicle component housings,- air intakes,- service fluid inlets,- sports accessories, protectors, etc. HOW TO PRINTRecommended printing temperature 240-270°C.Recommended table temperature: 60-80°C.Heated table required TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 1000g Print temperature 240-270 °CBed temperature 60-80 °C PHYSICAL PARAMETERS Density 1,24 g/cm3Odor OdorlessTensile strength (to break) 46 MPaNotched Izod impact strength 92 kJ/m2Vicat softening point 76/64 °C (0,455 MPa/1,82 Mpa) Printable model for refill spool sides you can download here: Recommended printing parameters:

PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print Applications: prototyping, large-format printing, lampshades/enclosures. PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Recommended printing parameters extrusion temperature 220-250°C bed temperature: 60-80°C fan: 0-60% Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: black Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.29 g/cm3 Odor: odourless Heat distortion temperature: 78°C (ISO 306) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,02 Tensile elongation: 6 % Tensile strength (to break): 20 MPa

PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print, has high transparency and is odourless.Applications: prototyping, large-format printing, lampshades/enclosures.PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parametersextrusion temperature 220-250°Cbed temperature: 60-80°Cfan: 0-60%PRODUCT PARAMETERSColor: grayDiameter: 1.75 mmWeight: 3000 g (vacuum packed)Density: 1.29 g/cm3Odor: odourlessHeat distortion temperature: 78°C (ISO 306)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,02Tensile elongation: 6 %Tensile strength (to break): 20 MPa

PLA Starter filament by Rosa3D was created for beginners of 3D printng. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: whiteDiameter: 1.75 mmWeight: 3 kg (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa

PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors. PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: chocolate brown Diameter: 1.75 mm Weight: 1000 g (vacuum packed) refill packing without plastic spool Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa

PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors. PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: light brown Diameter: 1.75 mm Weight: 1000 g (vacuum packed) refill packing without plastic spool Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa

The PLA Starter filament by Rosa3D was designed for beginner users of 3D printers. The seamless printing with our PLA Starter will let you print more and more complicated and challenging projects. PLA Starter is characterized by low moulding shrinkage and a lack of unpleasant smell. PLA Starter printouts are also characterised by very strong adhesion of layers and high quality reproduction of details. The filament is made of biodegradable biopolimer. It is manufactured from food-grade elements. However, in case of products that come into contact with food, certification lies with the manufacturer of the final product. APPLICATION- decorations (e.g. interior design elements, such as lamp shades or vases)- toys (e.g. figurines)- gadgets (e.g. key rings, pendants)- prototypes HOW TO PRINTRecommended printing temperature 190-225°CRecommended table temperature: 40-60°CRecommended cooling: 70-100% TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0,05Oval tolerance +/- 0,02Net weight 1000gPrint temperature 190-225 °CBed temperature 40-60 °C PHYSICAL PARAMETERSDensity 1.24 g/cm3Odor OdorlessTensile elongation 6 %Tensile strength (to break) 53 MPaTensile modulus 3500 MPaThermal deformation temperature 55 °C Printable model for refill spool sides you can download here:

ROSA-Flex 85A is a technical TPU filament. It can be used wherever elements resistant to chemical reagents and mechanical damage are needed. Printouts made of this material can be squeezed and stretched many times without damaging the original shape. The material is characterized by both excellent interlayer adhesion and adhesion to many work surfaces. Application examples: gaskets, bumpers, anti-vibration dampers/feet smartphone cases and devices housings components for drones components for RC cars ROSA-flex 85A is a thermoplastic polyurethane from ROSA3D. The material is designed for technical applications. Thanks to its flexibility and outstanding interlayer adhesion, it is suitable for all applications where mechanical resistance and tensile strength are required. It can be repeatedly squeezed and stretched without changing it’s original shape. The filament is characterized by exceptional chemical resistance. It is resistant to greases, oils and many solvents. The complete chemical resistance table can be found in ‘files to download’ section. The filament is intended for intermediate users who already have experience with 3D printing. Recommended printing parameters: extrusion temperature: 215-250 ° C bed temperature: 30-60 ° C print cooling: 0-100% (depends on the geometry of the model) printing speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed) compatible bed surfaces: glass, smooth PEI, textured PEI. Filament does not require a heated bed or chamber. In case of problems with adhesion, we recommend the use of an adhesive agent. It is recommended to enable print cooling. Fan speed should be adjusted according to printer capabilities and geometry of the printed object. PRODUCT PARAMETERS: Diameter: 1.75 mm Net weight: 500 g Spool weight: 245 g ROSA-Flex 85A PHYSICAL PARAMETERS: Density: 1.18 g / cm3 Odor: odorless Elongation at break: 520%