ELEGOO Rapid PLA+ Filament (Black)Elegoo Rapid PLA+ is a 3D printing filament that is extremely durable and resistant to damage. Compared to standard PLA, it has better properties - tensile strength is at least 60 (in standard PLA it is less than 40), and the material is more flexible - it stretches by 19%, while regular PLA reaches only 8%. As a result, prints from this filament are stronger and less prone to damage.Precise printsThe filament is precisely wound on the spool and has a uniform diameter of 1.75 mm with an accuracy of +/- 0.02 mm. This means that there should be no tangling, clogging of the extruder or other technical problems during printing. The material melts quickly and evenly, resulting in better print quality.Speed and protectionElegoo Rapid PLA+ is designed for high-speed printing - printers can operate at speeds of up to 600 mm/sec, which reduces the turnaround time of projects. The entire product is protected by vacuum packaging, which protects the filament from moisture and dust. The package contains 1 kg of material, guaranteeing long-lasting use with the highest quality standards. ManufacturerElegooModelRapid PLA+ColorblackWeight1 kgDiameter1.75 ± 0.02 mm
ELEGOO dual print head mounting plate for OrangeStorm GigaThe ELEGOO Dual Printhead Mounting Plate is a comprehensive kit for mounting two extruders on the OrangeStorm Giga 3D printer. This allows you to print in two colors simultaneously, for example. With a solid, well-thought-out design, the product provides a reliable, stable mounting, eliminating vibrations and ensuring high precision printing.IncludedMounting plateHM screws 4*10 x4Mounting blockCableClamping bands ManufacturerELEGOOModel50.204.0101CompatibilityELEGOO OrangeStorm Giga printer
Silicon Carbide (Carborundum) glass plate adheres very well to most printing plastics, and also has good heat transfer. Printed products usually come off easily and cleanlyFor CR-6SE printersSize: 245mm x 255mm The description was translated using an automatic translator. If you notice any discrepancies, please notify us by email: aprasymai@lemona.lt.
Made of non-stick silicone materialProvides insulation to maintain stable printing temperatures.Protects the heater block from filament oozing.Compatible with Ender 3 S1 (Sprite Direct Drive) for a precise fit.Enhances the longevity and performance of your 3D printer.Supported Printers: (Stock hotend)Ender-3 S1 PlusEnder-3 S1Ender-3 S1 ProSermoon V2CR-200B ProSermoon V1/V1 ProDimmensions 23.1×19.1×17.05 mm
Keep your Creality K2 Plus 3D printer clean and operating at peak performance with these Original Mouth Wipe Strips (Model: 4004010266). Designed to wipe excess filament from the nozzle during auto-cleaning routines, these strips help prevent clogs, print defects, and nozzle buildup—ensuring consistent extrusion and smoother first layers. These are genuine Creality replacement parts, made from durable materials for long-lasting use and seamless compatibility with the K2 Plus toolhead cleaning system
Fan type 4020 Voltage 24V, 6000rpm, cable lenght L150mm Easy replacementEfficient heat dissipationSilent and low noise Motherboard: Ender-6_CR-5 Pro H(CT-380)_CR-5 Pro_CR-X_CR-X Pro_CR-10S Pro V2Hotend: CR-10 Max_CR-2020_CR20 Pro_CR-10S Pro V2_Ender-7_CR-10 Max_CR-10S PRO_Sermoon D1
This build plate from Creality offers a high-quality epoxy resin particle heat-resistant, durable and with a robust sandblasted structure, it is scratch and wear-resistant - ideal for demanding printing projects. Stable adhesion for perfect models Thanks to the ultra-high adhesion, your prints remain stable even under challenging conditions. Whether at high or low temperatures - warping is a thing of the past. High precision and easy removal The elastic spring steel plate ensures perfect flatness and can be easily bent after printing to remove models easily and safely. Even after frequent use, it remains deformation-free and retains its reliability. More features: With the dual-grip and dual-positioning system, the plate can be attached in no time at all, Rounded corners prevent injuries and ensure comfortable handling. Size 280x265mm Dedicated for Creality Hi 3D printers, but can be used with other models where is used same dimmensions beds
Shock-absorbing Silicone Pad-Strong Flexibility,Shock-absorbing and Noise-reducing,Stable Adsorption Strong Flexibility-Made of high-quality silicone with excellent elasticity and toughness, it resists breaking under heavy pressure. Shock Absorption and Noise Reduction-The pad effectively reduces noise from printer vibrations, maintaining a quiet and creative environment." Strong Adsorption, More Stable-The suction cup design firmly secures the machine in place, effectively preventing it from shifting during high-speed movements." Dedicated for K1_K1 Max_K1C_K1 SE_Ender-3 V3_Ender-3 V3 Plus_Creality Hi
Thanks to the high fluidity and fast cooling formula, Hyper Series PLA supports up to 600mm/s print speed. High fluidity provides sufficient melting and extrusion, while rapid cooling provides fast shaping for high-speed printing. Easy filament identification for Creality printers and CFS deices with RFID identification option High Precision High stability ensures small changes in thermal expansion and cold contraction even when printing at high speeds, bringing high precision in dimensions and better results. Higher Toughness With higher tensile strength than ABS and higher toughness than traditional PLA, Hyper Series PLA brings better structural bearing capacity to the printed models. Application: Prototyping Figurines Machine parts Mass production Specifications: Wire diameter: 1.75±0.03mm Density 1.25g/cm3 Tensile strenght (X-Y) 52.991 Mpa Tensile modulus (X-Y) 1146.064 Elogation at break 6.3% Bending streght (X-Y) 92.3Mpa Printing temperatue 190-230 ºC Printing speed 30-600mm/s
The PLA Starter filament by Rosa3D was designed for beginner users of 3D printers. The seamless printing with our PLA Starter will let you print more and more complicated and challenging projects. PLA Starter is characterized by low moulding shrinkage and a lack of unpleasant smell. PLA Starter printouts are also characterised by very strong adhesion of layers and high quality reproduction of details. The filament is made of biodegradable biopolimer. It is manufactured from food-grade elements. However, in case of products that come into contact with food, certification lies with the manufacturer of the final product. APPLICATION- decorations (e.g. interior design elements, such as lamp shades or vases)- toys (e.g. figurines)- gadgets (e.g. key rings, pendants)- prototypes HOW TO PRINTRecommended printing temperature 190-225°CRecommended table temperature: 40-60°CRecommended cooling: 70-100% TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0,05Oval tolerance +/- 0,02Net weight 1000gPrint temperature 190-225 °CBed temperature 40-60 °C PHYSICAL PARAMETERSDensity 1.24 g/cm3Odor OdorlessTensile elongation 6 %Tensile strength (to break) 53 MPaTensile modulus 3500 MPaThermal deformation temperature 55 °C Printable model for refill spool sides you can download here:
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: greenDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors. PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: Army green Diameter: 1.75 mm Weight: 1000 g (vacuum packed) refill packing without plastic spool Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
